This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.10.23.21.03.24/anita \ --structured-log-file=/bracket/i386/test/2017.10.23.21.03.24/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.10.23.21.03.24/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.10.23.21.03.24/anita/install_tmp.iso /bracket/i386/test/2017.10.23.21.03.24/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.10.23.21.03.24/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.10.23.21.03.24/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.10.23.21.03.24/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 9642 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15786008\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block106): /bracket/i386/test/2017.10.23.21.03.24/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block307): /bracket/i386/test/2017.10.23.21.03.24/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block570): /bracket/i386/test/2017.10.23.21.03.24/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.10change floppy0 /bracket/i386/test/2017.10.change floppy0 /bracket/i386/test/2017.10.2change floppy0 /bracket/i386/test/2017.10.23chan |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...ge floppy0 /bracket/i386/test/2017.10.23.change floppy0 /bracket/i386/test/2017.10.23.2change floppy0 /bracket/i386/test/2017.10.23.21change floppy0 /bracket/i386/test/2017.10.23.21.change floppy0 /bracket/i386/test/2017.10.23.21.0change floppy0 /bracket/i386/test/2017.10.23.21.03 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5764692-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2017.10.23.21.03.change floppy0 /bracket/i386/test/2017.10.23.21.03.2change floppy0 /bracket/i386/test/2017.10.23.21.03.24change floppy0 /bracket/i386/test/2017.10.23.21.03.24/change floppy0 /bracket/i386/test/2017.10. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846860=0x155d294 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.5 (INSTALL) #0: Tue Oct 24 00:26:23 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.10.23.21.03.24-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20170831 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.5/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" runs test FAILURE: too few runs of 2 1s (1097 <= 1114) cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 10282 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 28 1s found cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.5 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.5 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [QEMU HARDDISK ]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'QEMU HARDDISK ' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA21% |*******4288 KiB 2.12 M00:07 ETA24800947*********9408434 ETA56***1126463 ETA80*********60001 ETA2321100*******| 1988840 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA12% |****5120 KiB 2.85 M00:12 ETA46144732****1011251 ETA9**2480820 ETA36**5046509 ETA43***8048788 ETA50**2118467 ETA7**3746 ETA64***68805 ETAc68% |***********************| 28544 KiB 2.68 MiB/s 00:04 ETA70*9248452*30016378***443242 ETA7**6480996*** | 40192520 ETA100**| 41630471 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA4% |*6272 KiB 3.80 M00:37 ETA5819579 ETA8% |**12864707 ETA12% |****8624.21 ETA5*23100 ETA771361829 ETA9*9693.8431 ETAc20% |*******| 32320 KiB 3.80 MiB/s 00:31 ETA13216335 ETA472186 ETAc22% |*******| 34560 KiB 2.88 MiB/s 00:40 ETA742 ETAc25% |********| 38848 KiB 2.82 MiB/s 00:39 ETA9806741 ETA6*40192543 ETAc27% |*********| 43072 KiB 2.55 MiB/s 00:42 ETA395 ETAc29% |**********| 45440 KiB 2.42 MiB/s 00:43 ETA30640295 ETAc30% |**********| 46720 KiB 2.25 MiB/s 00:46 ETA7616138 ETA089 ETAc31% |**********| 49088 KiB 2.02 MiB/s 00:50 ETA1.971 ETAc32% |***********| 49728 KiB 1.89 MiB/s 00:53 ETA504967c33% |***********| 52160 KiB 1.84 MiB/s 00:53 ETA795 ETAc 35% |************| 54976 KiB 1.80 MiB/s 00:53 ETA764 ETAc 35% |************| 55028 KiB 1.70 MiB/s 00:56 ETA658 ETAc 35% |************| 55028 KiB 1.60 MiB/s 01:00 ETA68058657651 ETAc 37% |************| 57728 KiB 1.54 MiB/s 01:00 ETA02 ETAc 37% |************| 57728 KiB 1.46 MiB/s 01:04 ETA25 ETA8*971243 ETAc 39% |*************| 60992 KiB 1.43 MiB/s 01:03 ETAc 39% |*************| 60992 KiB 1.40 MiB/s 01:04 ETA366 ETA47 ETA41*406473 ETAc 42% |**************| 65792 KiB 1.37 MiB/s 01:02 ETA53 ETAc 42% |**************| 65792 KiB 1.32 MiB/s 01:05 ETA296 ETA3*7648314 ETAc 45% |***************| 70016 KiB 1.32 MiB/s 01:01 ETA02 ETAc 45% |***************| 70016 KiB 1.27 MiB/s 01:04 ETA55 ETAc 45% |***************| 70016 KiB 1.22 MiB/s 01:06 ETA17 ETA7*270434 ETAc 48% |****************| 75264 KiB 1.25 MiB/s 01:01 ETA32 ETAc 48% |****************| 75264 KiB 1.21 MiB/s 01:03 ETA194 ETAc 48% |****************| 75264 KiB 1.17 MiB/s 01:05 ETA56 ETA50*801682 ETAc 52% |******************| 81152 KiB 1.21 MiB/s 00:58 ETA77199 ETAc 52% |******************| 81208 KiB 1.17 MiB/s 01:00 ETA51 ETA326860:59 ETA8**9920240 ETA60*93248746 ETAc 63% |**********************| 97664 KiB 1.31 MiB/s 00:41 ETA292 ETAc 64% |**********************| 98880 KiB 1.29 MiB/s 00:41 ETA72 ETAc 64% |**********************| 98880 KiB 1.26 MiB/s 00:42 ETA43 ETA5 98 M51 ETAc 67% |***********************| 101 MiB 1.26 MiB/s 00:38 ETA59 ETAc 67% |***********************| 101 MiB 1.23 MiB/s 00:39 ETA240 ETA70*5635 ETAc 72% |*************************| 109 MiB 1.29 MiB/s 00:32 ETA7c 72% |*************************| 109 MiB 1.25 MiB/s 00:32 ETA43 ETAc 74% |*************************| 112 MiB 1.26 MiB/s 00:29 ETA530 ETA5*329 ETAc 76% |**************************| 115 MiB 1.25 MiB/s 00:27 ETA48 ETAc 76% |**************************| 115 MiB 1.22 MiB/s 00:28 ETA17726 ETAc 78% |***************************| 118 MiB 1.22 MiB/s 00:25 ETA16 ETAc 78% |***************************| 118 MiB 1.20 MiB/s 00:26 ETA18c 79% |***************************| 119 MiB 1.19 MiB/s 00:25 ETA7c 80% |**************************** | 120 MiB 1.16 MiB/s 00:25 ETA14 ETAc 81% |**************************** | 122 MiB 1.15 MiB/s 00:24 ETAc 83% |***************************** | 124 MiB 1.15 MiB/s 00:21 ETAc 83% |***************************** | 126 MiB 1.14 MiB/s 00:21 ETA4730 ETA58419 ETAc 88% |****************************** | 132 MiB 1.16 MiB/s 00:15 ETA5c 88% |****************************** | 132 MiB 1.14 MiB/s 00:15 ETA3c 88% |****************************** | 133 MiB 1.13 MiB/s 00:14 ETA9*c 90% |******************************* | 136 MiB 1.13 MiB/s 00:12 ETA1721 ETAc 91% |******************************* | 137 MiB 1.12 MiB/s 00:10 ETA3*9309 ETA417 ETA429** | 14970 ETA5065100*43 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc30% |**********| 1280 KiB 660.06 KiB/s 00:04 ETA21.5310*************************| 419 1.17 M0 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 1664 KiB 826.66 KiB/s 06:02 ETA795.2516 ETAc0% || 1664 KiB 425.91 KiB/s 11:42 ETA2816 KiB 68207:16 ETAc4% |*| 13696 KiB 2.36 MiB/s 01:58 ETA072:15 ETAc4% |*| 13696 KiB 1.74 MiB/s 02:40 ETA5856 ETA5510459 ETA6% |**20928919 ETAc7% |**| 22976 KiB 1.92 MiB/s 02:21 ETA8030 ETAc7% |**| 22976 KiB 1.64 MiB/s 02:45 ETA5554 ETAc7% |**| 22976 KiB 1.43 MiB/s 03:08 ETA3618 ETA86752492:59 ETAc9% |***| 30016 KiB 1.57 MiB/s 02:48 ETA109759 ETAc 10% |***| 30976 KiB 1.46 MiB/s 02:59 ETA03:07 ETA13603612 ETA139844005 ETAc 11% |***| 35776 KiB 1.42 MiB/s 03:01 ETA2% |****7380102 ETAc 13% |****| 39808 KiB 1.40 MiB/s 03:01 ETA417232:55 ETAc 13% |****| 41920 KiB 1.37 MiB/s 03:03 ETA47 ETA4377655 ETAc 14% |****| 44928 KiB 1.35 MiB/s 03:05 ETAc 15% |*****| 46272 KiB 1.34 MiB/s 03:05 ETA19 ETAc 15% |*****| 46272 KiB 1.26 MiB/s 03:16 ETA320 ETAc 15% |*****| 46272 KiB 1.20 MiB/s 03:27 ETA1732 ETA40047 ETAc 15% |*****| 47296 KiB 1.14 MiB/s 03:36 ETA6884 ETA9792c 17% |*****| 51648 KiB 1.15 MiB/s 03:29 ETAc 17% |*****| 52288 KiB 1.14 MiB/s 03:32 ETA48025 ETAc 17% |***** | 52507 KiB 1.09 MiB/s 03:40 ETA 74 ETA3568c 18% |******| 55552 KiB 1.09 MiB/s 03:38 ETA743 ETAc 18% |******| 55552 KiB 1.05 MiB/s 03:47 ETA744351 ETA20*604161032 ETA27772107 ETA4*7456032:48 ETA7*83204327 ETA9*97285215 ETAc 30% |**********| 91072 KiB 1.51 MiB/s 02:15 ETA7760c 31% |**********| 94656 KiB 1.52 MiB/s 02:12 ETA03 ETAc 32% |***********| 96320 KiB 1.49 MiB/s 02:13 ETA84 ETAc 32% |***********| 96320 KiB 1.44 MiB/s 02:17 ETA8 ETA7933990455 ETAc 33% |***********| 98 MiB 1.43 MiB/s 02:15 ETA26 ETAc 33% |***********| 98 MiB 1.39 MiB/s 02:19 ETA820 ETAc 33% |***********| 99 MiB 1.36 MiB/s 02:22 ETA4100c 34% |***********| 102 MiB 1.37 MiB/s 02:19 ETA520 ETAc 35% |************| 104 MiB 1.35 MiB/s 02:20 ETA41 ETAc 36% |************| 106 MiB 1.34 MiB/s 02:19 ETA320 ETAc 36% |************| 107 MiB 1.33 MiB/s 02:19 ETA121 ETAc 37% |************| 111 MiB 1.34 MiB/s 02:15 ETA27 ETA8*343 ETAc 39% |*************| 115 MiB 1.34 MiB/s 02:12 ETA33 ETAc 40% |**************| 120 MiB 1.37 MiB/s 02:05 ETA67 ETA125 ETAc 42% |**************| 126 MiB 1.39 MiB/s 02:00 ETA71 ETA3*891:58 ETA432414 ETA5422 ETA7*8447 ETA84163 ETA9*5939 ETAc 50% |*****************| 149 MiB 1.51 MiB/s 01:35 ETA496 ETA8c 52% |******************| 154 MiB 1.52 MiB/s 01:31 ETA51360c 53% |******************| 157 MiB 1.50 MiB/s 01:30 ETA491 ETAc 55% |*******************| 162 MiB 1.52 MiB/s 01:26 ETA07 ETA415 ETA7940 ETAc 58% |********************| 171 MiB 1.55 MiB/s 01:18 ETA49 ETA9456 ETA60*65 ETA1972 ETAc 62% |*********************| 184 MiB 1.59 MiB/s 01:09 ETA73*796 ETAc 64% |**********************| 189 MiB 1.59 MiB/s 01:05 ETA86 ETA6*96630:59 ETAc 67% |***********************| 198 MiB 1.62 MiB/s 00:58 ETAc 68% |***********************| 201 MiB 1.62 MiB/s 00:57 ETA1c 69% |************************| 205 MiB 1.63 MiB/s 00:53 ETA7062c 71% |************************| 209 MiB 1.62 MiB/s 00:52 ETA12*14448 ETAc 74% |*************************| 219 MiB 1.66 MiB/s 00:44 ETA55 ETA5*2262 ETA8*97037 ETAc 78% |***************************| 231 MiB 1.70 MiB/s 00:36 ETA81*941 ETA3*46826 ETA6*54821 ETA78319 ETA898 ETA60217 ETA9*210793876 ETA4690554635 ETAc 90% |******************************* | 266 MiB 1.72 MiB/s 00:15 ETA1706918786594324 ETA7012*059817652432333 ETA412 ETA51 ETA4608109 ETA5* | 28008 ETA149c 95% |********************************* | 282 MiB 1.49 MiB/s 00:07 ETA6386 ETA4765755 ETA463274 ETA108398*873 ETA6954c 98% |********************************** | 289 MiB 1.34 MiB/s 00:03 ETA32 ETAc 98% |********************************** | 290 MiB 1.33 MiB/s 00:02 ETA21c 99% |********************************** | 291 MiB 1.30 MiB/s 00:01 ETA20 ETA29100*| 293 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 192 KiB 98.51 KiB/s 02:32 ETA3.7040 ETAc1% || 192 KiB 48.97 KiB/s 05:06 ETAc1% || 192 KiB 47.05 KiB/s 05:19 ETA32.377:43 ETAc1% || 192 KiB 31.72 KiB/s 07:53 ETA24.11- stalled -ccd0a: error reading fsbn 529084 of 529084-529099 (cd0 bn 529084; cn 5290 tn 0 sn1% || 192 KiB 23.87 KiB/s - stalled -gzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Unexpected EOF on archive file 1% || 192 KiB 23.76 KiB/s - stalled -Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.10.23.21.03.24/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.10.23.21.03.24/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.10.23.21.03.24/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 9642 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11390.21 real 28.05 user 12.61 sys