This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.10.27.01.34.32/anita \ --structured-log-file=/bracket/i386/test/2017.10.27.01.34.32/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.10.27.01.34.32/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.10.27.01.34.32/anita/install_tmp.iso /bracket/i386/test/2017.10.27.01.34.32/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.10.27.01.34.32/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.10.27.01.34.32/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.10.27.01.34.32/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 12619 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15786220\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block138): /bracket/i386/test/2017.10.27.01.34.32/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block383): /bracket/i386/test/2017.10.27.01.34.32/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block523): /bracket/i386/test/2017.10.27.01.34.32/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.10change floppy0 /bracket/i386/test/2017.10.change floppy0 /bracket/i386/test/2017.10.2change floppy0 /bracket/i386/test/2017.10.27chan /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5764692-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2017.10.27.change floppy0 /bracket/i386/test/2017.10.27.0change floppy0 /bracket/i386/test/2017.10.27.01change floppy0 /bracket/i386/test/2017.10.27.01.change floppy0 /bracket/i386/test/2017.10.27.01.3change floppy0 /bracket/i386/test/2017.10.27.01.34change floppy0 /bracket/i386/test/2017.10.27.01.34.change floppy0 /bracket/i386/test/2017.10.27.01.34.3change floppy0 /bracket/i386/test/2017.10.27.01.34.32change floppy0 /bracket/i386/test/2017.10.27.01.34.32/change floppy0 /bracket/i386/test/2017.10. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846860=0x155d294 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.5 (INSTALL) #0: Fri Oct 27 03:42:48 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.10.27.01.34.32-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20170831 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet addreso isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.5/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" monobit test FAILURE: 10305 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 5 0s (219 >= 209) cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 2 0s (1408 >= 1386) cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too few runs of 3 1s (527 <= 527) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.5 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.5 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [QEMU HARDDISK ]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'QEMU HARDDISK ' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA62% |*********************12480 KiB 8.44 M00:00 ETA100**************| 198988 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA18% |******7552 KiB 4.46 M00:07 ETA24**1036886 ETA37****5616265 ETA4****9584394 ETA60*****2502463 ETA7**823080*****333461 ETA9***756880 ETA10****| 41630271 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA5% |*8448 KiB 5.55 M00:25 ETA8% |**132843 ETAc13% |****| 20800 KiB 5.92 MiB/s 00:21 ETA4.49 ETA426561430 ETA8**8413328 ETAc19% |******| 30528 KiB 3.98 MiB/s 00:30 ETA44 ETAc21% |*******| 33472 KiB 3.49 MiB/s 00:33 ETA078 ETA245602.99 ETA5*8723.046 ETA7*43072154 ETA30*723073 ETA488c34% |***********| 52800 KiB 3.10 MiB/s 00:31 ETA32482.963 ETA5*4080844 ETAc36% |************| 56640 KiB 2.83 MiB/s 00:33 ETA675 ETAc37% |************| 58368 KiB 2.67 MiB/s 00:34 ETA8*9520546 ETA7760c41% |**************| 63808 KiB 2.53 MiB/s 00:34 ETA24704483*745676*71424561 ETA50*82726727 ETAc52% |******************| 80192 KiB 2.65 MiB/s 00:27 ETA568 ETAc52% |******************| 80192 KiB 2.48 MiB/s 00:29 ETA0330738 ETAc 57% |*******************| 88192 KiB 2.49 MiB/s 00:25 ETA16 ETAc 58% |********************| 89728 KiB 2.40 MiB/s 00:26 ETA3290240297 ETA61*4592334 ETAc 63% |**********************| 98304 KiB 2.37 MiB/s 00:22 ETA03 ETAc 63% |**********************| 98304 KiB 2.25 MiB/s 00:24 ETA05 98 M23 ETAc 67% |***********************| 101 MiB 2.22 MiB/s 00:21 ETA182 ETAc 67% |***********************| 101 MiB 2.12 MiB/s 00:22 ETA093 ETA9*4111 ETAc 70% |************************| 106 MiB 2.09 MiB/s 00:20 ETA61 ETAc 70% |************************| 106 MiB 2.01 MiB/s 00:21 ETA1.982 ETAc 71% |************************| 107 MiB 1.96 MiB/s 00:21 ETA32 ETA2*940 ETAc 75% |**************************| 113 MiB 1.97 MiB/s 00:18 ETA4c 75% |**************************| 113 MiB 1.90 MiB/s 00:19 ETA8776907 ETAc 78% |***************************| 118 MiB 1.88 MiB/s 00:16 ETA67 ETAc 78% |***************************| 118 MiB 1.83 MiB/s 00:17 ETA0c 80% |**************************** | 121 MiB 1.82 MiB/s 00:15 ETA796 ETAc 81% |**************************** | 122 MiB 1.78 MiB/s 00:15 ETA3*594 ETA63 ETAc 87% |****************************** | 130 MiB 1.82 MiB/s 00:10 ETA83309 ETAc 88% |****************************** | 133 MiB 1.80 MiB/s 00:09 ETA78c 88% |****************************** | 133 MiB 1.76 MiB/s 00:09 ETA49*429058 ETAc 91% |******************************* | 137 MiB 1.72 MiB/s 00:07 ETA2*86 ETA3405 ETAc 94% |******************************** | 141 MiB 1.71 MiB/s 00:05 ETA5*423 ETA9* | 14960 ETA5503100*2 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 2.99 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc2% || 6784 KiB 3.88 MiB/s 01:14 ETA2.8540 ETA3% |*110083.0931 ETAc4% |*| 14144 KiB 3.11 MiB/s 01:29 ETA2.4752 ETAc5% |*| 16448 KiB 2.50 MiB/s 01:50 ETA12:12 ETAc5% |*| 16448 KiB 1.91 MiB/s 02:25 ETA6646 ETA6% |**93928429 ETAc7% |**| 21888 KiB 1.83 MiB/s 02:28 ETA7237 ETA84960827 ETA9% |***796872 ETA10305929415 ETAc11% |***| 33152 KiB 1.96 MiB/s 02:12 ETA449615 ETAc12% |****| 37248 KiB 1.97 MiB/s 02:10 ETA833614 ETAc12% |****| 38336 KiB 1.83 MiB/s 02:19 ETA728 ETA910409 ETAc14% |****| 42752 KiB 1.76 MiB/s 02:22 ETA07 ETA454416 ETAc 15% |*****| 47552 KiB 1.74 MiB/s 02:21 ETA685122 ETA5068831 ETAc 17% |*****| 52608 KiB 1.75 MiB/s 02:18 ETA33126922 ETA8*6197615 ETA21*633609001 ETAc 21% |*******| 66176 KiB 1.90 MiB/s 02:00 ETA891 ETAc 23% |********| 69568 KiB 1.89 MiB/s 01:59 ETA72:00 ETAc 23% |********| 71232 KiB 1.84 MiB/s 02:01 ETA13 ETA450741:59 ETA6*801990 ETAc 28% |*********| 85440 KiB 2.00 MiB/s 01:45 ETA1.966 ETAc 29% |**********| 88832 KiB 1.99 MiB/s 01:43 ETA46 ETA309088055 ETAc 31% |**********| 93952 KiB 1.97 MiB/s 01:42 ETA24 ETAc 31% |**********| 93952 KiB 1.89 MiB/s 01:46 ETA49 ETAc 31% |**********| 94528 KiB 1.83 MiB/s 01:50 ETA782 ETA600091 ETAc 32% |***********| 97984 KiB 1.77 MiB/s 01:51 ETA62 ETAc 33% |***********| 98 MiB 1.76 MiB/s 01:50 ETA42 ETA4101748 ETAc 35% |************| 103 MiB 1.76 MiB/s 01:47 ETAc 35% |************| 103 MiB 1.74 MiB/s 01:49 ETA538 ETA050 ETAc 36% |************| 106 MiB 1.70 MiB/s 01:49 ETA6751 ETAc 36% |************| 108 MiB 1.68 MiB/s 01:50 ETA52 ETA8*12947 ETA41*207837 ETA26841 ETA5*329124 ETA7*8619 ETAc 48% |****************| 141 MiB 1.98 MiB/s 01:16 ETA48 ETA356 ETA9*674 ETA51502.001 ETAc 52% |******************| 155 MiB 2.02 MiB/s 01:08 ETA1.999 ETA36492.016 ETA6*6552 ETA8*71100:58 ETA9525 ETAc 61% |*********************| 179 MiB 2.15 MiB/s 00:53 ETA803c 61% |*********************| 180 MiB 2.11 MiB/s 00:53 ETA084 ETA173*6110 ETAc 64% |**********************| 189 MiB 2.11 MiB/s 00:49 ETA09c 65% |**********************| 193 MiB 2.10 MiB/s 00:47 ETA6*507c 66% |***********************| 196 MiB 2.08 MiB/s 00:46 ETA7737 ETAc 68% |***********************| 201 MiB 2.03 MiB/s 00:45 ETA16 ETA070*63 ETAc 71% |************************| 209 MiB 1.99 MiB/s 00:42 ETAc 71% |************************| 209 MiB 1.95 MiB/s 00:43 ETAc 71% |************************| 211 MiB 1.93 MiB/s 00:42 ETA4*8638 ETA5*2186 ETA772.022 ETA9*32529 ETA81*886 ETA3*44123 ETAc 85% |***************************** | 252 MiB 2.16 MiB/s 00:19 ETA4c 85% |***************************** | 252 MiB 2.12 MiB/s 00:19 ETA06*37727 ETA8916 ETA600095 ETA189*6253434 ETA42190501.9967653 ETA472110889879653702*12 ETA7918762543331 ETA4520 ETA614908 ETA5* | 2807 ETA16206 ETA6938475 ETA65754634 ETA2170583 ETAc 97% |********************************* | 287 MiB 1.58 MiB/s 00:03 ETAc 98% |********************************** | 288 MiB 1.57 MiB/s 00:03 ETA659422 ETA19004989271 ETA360 ETA100* Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc35% |************| 5376 KiB 3.22 MiB/s 00:02 ETA2.194 ETA54******8320322 ETAc76% |**************************| 11584 KiB 2.57 MiB/s 00:01 ETA81**235213c81% |**************************** | 12352 KiB 1.89 MiB/s 00:01 ETA57c81% |**************************** | 12352 KiB 1.43 MiB/s 00:01 ETA22 ETA17c81% |**************************** | 12352 KiB 1.02 MiB/s - stalled -0.98ccd0a: error reading fsbn 537924 of 537924-538051 (cd0 bn 537924; cn 5379 tn 0 sn81% |**************************** | 12352 KiB 898.81 KiB/s - stalled -66.02c81% |**************************** | 12352 KiB 785.11 KiB/s - stalled -59.04c 81% |**************************** | 12352 KiB 698.49 KiB/s - stalled -73.71c 81% |**************************** | 12352 KiB 628.76 KiB/s - stalled -06.52c cd0a: error reading fsbn 538052 of 538052-538179 (cd0 bn 538052; cn 5380 tn 0 sn 81% |**************************** | 12352 KiB 572.21 KiB/s - stalled -50.77c 83% |***************************** | 12672 KiB 540.44 KiB/s 00:04 ETA14.30c 84% |***************************** | 12928 KiB 508.80 KiB/s 00:04 ETA485.66c 84% |***************************** | 12928 KiB 472.69 KiB/s 00:04 ETA50.765 ETAc 84% |***************************** | 12928 KiB 440.76 KiB/s 00:05 ETA21.08- stalled -c 84% |***************************** | 12928 KiB 413.54 KiB/s - stalled -c cd0a: error reading fsbn 538132 of 538132-538147 (cd0 bn 538132; cn 5381 tn 0 sn 84% |***************************** | 12928 KiB 394.55 KiB/s - stalled - gzip: failed to read stdin: Device busy tar: End of archive volume 1 reachedtar: Unexpected EOF on archive file 84% |***************************** | 12928 KiB 394.05 KiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.10.27.01.34.32/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.10.27.01.34.32/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.10.27.01.34.32/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 12619 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11302.07 real 21.26 user 13.70 sys