This is anita version 2.10 Using pexpect version 4.8.0 /usr/pkg/bin/anita \ --workdir=/bracket/alpha/test/2024.02.16.12.08.29/anita \ --structured-log-file=/bracket/alpha/test/2024.02.16.12.08.29/install.slog \ --vmm-args= \ --memory-size 64M \ install \ file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/ Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/instkernel/netbsd.gz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/modules.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/base.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/etc.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/comp.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/gpufw.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/misc.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/rescue.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/tests.tgz... OK Downloading file:///bracket/alpha/test/2024.02.16.12.08.29/release/release/alpha/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ /bracket/alpha/test/2024.02.16.12.08.29/anita/install_tmp.iso \ /bracket/alpha/test/2024.02.16.12.08.29/anita/download Creating hard disk image... done. QEMU emulator version 6.0.0 Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-alpha qemu package: qemu-6.0.0nb2 glib2 package: glib2-2.64.1 qemu-system-alpha \ -m 64 \ -drive file=/bracket/alpha/test/2024.02.16.12.08.29/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive file=/bracket/alpha/test/2024.02.16.12.08.29/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -kernel /bracket/alpha/test/2024.02.16.12.08.29/anita/netbsd_install \ -append root=/dev/wd0a child pid is 20016 PCI: 0:1:0 class 0300 id 1013:00b8 PCI: region 0 (BAR 10): 10000000 PCI: region 1 (BAR 14): 12000000 PCI: 0:2:0 class 0200 id 8086:100e PCI: region 0 (BAR 10): 12020000 PCI: region 1 (BAR 14): 0000c000 PCI: intr pin 1 -> irq 12 PCI: 0:3:0 class 0101 id 1095:0646 PCI: region 0 (BAR 10): 0000c040 PCI: region 1 (BAR 14): 0000c048 PCI: region 2 (BAR 18): 0000c050 PCI: region 3 (BAR 1c): 0000c058 PCI: region 4 (BAR 20): 0000c060 PCI: intr pin 1 -> irq 16 PCI: 0:7:0 class 0601 id 8086:0484 CTB: PRINTERPORT[ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.10 (INSTALL) #0: Fri Feb 16 15:21:01 UTC 2024 [ 1.0000000] root@babylon5.netbsd.org:/tmp/build/2024.02.16.12.08.29-alpha/obj/sys/arch/alpha/compile/INSTALL [ 1.0000000] 6600 family, unknown model variation 0x1400, 250MHz, s/n QEMU [ 1.0000000] 8192 byte page size, 1 processor. [ 1.0000000] total memory = 65536 KB [ 1.0000000] (120 KB reserved for PROM, 65416 KB used by NetBSD) [ 1.0000000] avail memory = 52952 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264A-0 (EV67) [ 1.0000000] cpu0: Architecture extensions: 0x1307 [ 1.0000000] qemu0 at mainbus0: Qemu virtual machine services [ 1.0000030] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0 [ 1.0000030] tsc0: 2 Dchips, 1 memory bus of 16 bytes [ 1.0000030] tsc0: arrays present: 0MB, 0MB, 0MB, 0MB, Dchip 0 rev 0 [ 1.0000030] tsp0 at tsc0 [ 1.0000030] pci0 at tsp0 bus 0 [ 1.0000030] vga0 at pci0 dev 1 function 0: vendor 1013 product 00b8 (rev. 0x00) [ 1.0000030] wsdisplay0 at vga0 (kbdmux ignored) [ 1.0000030] drm at vga0 not configured [ 1.0000030] wm0 at pci0 dev 2 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0000030] wm0: interrupting at dec 6600 irq 12 [ 1.0000030] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0000030] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0000030] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000030] cmdide0 at pci0 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07) [ 1.0000030] cmdide0: primary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: using dec 6600 irq 16 for native-PCI interrupt [ 1.0000030] atabus0 at cmdide0 channel 0 [ 1.0000030] cmdide0: secondary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: secondary channel ignored (disabled) [ 1.0000030] sio0 at pci0 dev 7 function 0: vendor 8086 product 0484 (rev. 0x03) [ 1.0000030] isa0 at sio0 [ 1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.0000030] com0: console [ 1.0000030] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO [ 1.0000030] pckbc0 at isa0 port 0x60-0x64 [ 1.0000030] pckbd0 at pckbc0 (kbd slot) [ 1.0000030] pckbc0: using irq 1 for kbd slot [ 1.0000030] wskbd0 at pckbd0 (mux ignored) [ 1.0000030] pms0 at pckbc0 (aux slot) [ 1.0000030] pckbc0: using irq 12 for aux slot [ 1.0000030] wsmouse0 at pms0 (mux ignored) [ 1.0000030] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0000030] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.0000030] tsciic at tsc0 [ 1.0000030] not configured [ 1.0000030] Using the Qemu CPU alarm for 50 Hz hardclock. [ 1.0000030] atapibus0 at atabus0: 2 targets [ 1.0000030] cd0 at atapibus0 drive 1: cdrom removable [ 1.0000030] wd0 at atabus0 drive 0 [ 1.0739611] wd0: [ 1.0739611] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 1.0739611] WARNING: system needs entropy for security; see entropy(7) [ 1.4634846] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.7553320] fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.7553320] root on md0a dumps on md0b [ 1.7553320] root file system type: ffs [ 1.7553320] kern.module.path=/stand/alpha/10.99.10/modules Terminal type? [vt100] xterm Erase set to backspace. erase ^?, werase ^W, kill ^U, intr ^C NetBSD/alpha 10.99.10 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in English xx b: Messages d'installation en franXais xx c: Installation auf Deutsch xx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-10.99.10 Install System xx xx>a: Install NetBSD to hard disk xx b: Upgrade NetBSD on a hard disk xx c: Re-install sets or install additional sets xx d: Reboot the computer xx e: Utility menu xx f: Config menu xx x: Exit Install System xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xx xx>a: wd0 (1.5G, QEMU HARDDISK) xx b: Extended partitioning xx x: Exit xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 1536M. A full installation requires at least 1156M without X and at least 1456M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do? xx xx>a: Set sizes of NetBSD partitions xx b: Use default partition sizes xx c: Manually define partitions xx x: Cancel xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1007616 (2883584) + / b: 262144 c: 0 /tmp (mfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1875968 sec. a: 1007616 (2883584) + / >b: 262144 b: 262144 >c: 0 /tmp (mfs) c: 0 /tmp (mfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1875968 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs. Total size: 1536M, free: 0B Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a: 0 2883583 2883584 FFS IN / b: 2883584 3145727 262144 swap c: 0 3145727 3145728 Whole disk ------------ ------------ ------------ -------- ---- ---------------- e: Change input units (sectors/cylinders/MB/GB) f: Edit name of the disk g: Clone external partition(s) h: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Status: RunningCommand: /sbin/newfs -V2 -O 1 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq /dev/rwd0a: 1408.0MB (2883584 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 8989607068696576.00MB, 11264 blks, 22272 inodes. .....................................................................[ 7.84024.......... Finished Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot /dev/rwd0c /usr/mdec/bootxx_ffs qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xx xx>a: Full installation xx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Miscellaneous No j: Recovery tools No k: Test programs No l: Text processing tools No m: X11 sets None n: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >j: Recovery tools NoYes j: Recovery tools Yes >k: Test programs NoYes k: Test programs Yes >m: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programming No xx c: X11 configuration No xx d: X11 fonts No xx e: X11 servers No xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No firmware Yes No Yes Yes Yes tools No None sets None sets m: X11 sets None >n: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sources No xx b: Base sources No xx c: Share sources No xx d: GNU sources No xx e: X11 sources No xx f: Debug symbols No xx g: X11 debug symbols No xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No firmware Yes No Y Yes Yes tools No None sets None sets n: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 9, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install from xx xx>a: CD-ROM / DVD xx b: HTTP xx c: FTP xx d: NFS xx e: Floppy xx f: Unmounted fs xx g: Local directory xx h: Skip set xx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 14460 KiB 10.96 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/modules.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA78% |***************************13128 KiB 8.86 M00:00 ETA100********| 166309 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/base.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA6% |**12120 KiB 8.56 M00:19 ETA9% |***8167.8021 ETA13% |****25984680 ETA8**344087519 ETA23**42976897 ETA7*505847631*9120915 ETA6**683368.064 ETA41**7696073 ETA6**86896261 ETA51*96112390 ETA7** 104 M5109 ETA62**1328 ETA7**2246 ETA71*3015**7405 ETA9*44324 ETA83**51283 ETA7*972 ETA92**671 ETA7*76300 ETA9* | 18113100*08 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/etc.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4990 KiB 5.85 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/comp.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA212720 KiB 9.11 M00:49 ETA4% |*209128.876% |**30839.306 ETA84113655 ETA10% |***5177642 ETA2% |****95048.129 ETA4670167.8050 ETA5*730086967624362 ETA783888259*911621 ETA21* 98 M4149 ETA3*10547 ETA51724 ETA8*30971 ETA30*418.1639 ETA2*50237 ETA46136 ETA6*7094 ETA8*8473 ETA41*9561 ETA3*201610 ETA510629 ETA7*2707 ETA9*936 ETA513845 ETA3*44 ETA5*5683 ETA76802 ETA9*7750 ETA62*8919 ETA4*98948 ETA6*3067 ETA81526 ETA9*2315 ETA71324 ETA3*453 ETA5*562 ETA8*69.011 ETA80*718.970 ETA18709 ETA3*87808 ETA4905755446*867 ETA7405356 ETA227 ETA7.992810706 ETA90*7662105 ETA13522*6434 ETA8343023311520436.9548647793 ETA925*43692 ETA685751591 ETA228*445538607230 ETA81590791625.97100*| 4636 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/gpufw.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 6144917.3300:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/misc.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA67% |***********************9904 KiB 7.37 M00:00 ETA100************| 146806.75 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/rescue.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 11260 KiB 8.47 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/tests.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA10% |***7592 KiB 5.32 M00:12 ETA8% |******139366.2009 ETA33*****252007.416 ETA41***31152145***906494 ETA9***448486.9670****53127.073 ETA8***9086.902 ETA85**64624831 ETA94*** | 7098670 ETA7* | 7303229100**| 7525002 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: RunningCommand: /bin/sh MAKEDEV all qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /usr/sbin/certctl rehash qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The extraction of the selected sets for NetBSD-10.99.10 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continue xmqqqqqqqqqqqqqqqqqqqqqqqj The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root. New password: Password unchanged. passwd: /etc/master.passwd: unchanged This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue! Enter one line of random characters. *************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************** [ 169.9975815] entropy: ready Traceback (most recent call last): File "/usr/pkg/bin/anita", line 157, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2354, in install self._install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 1473, in _install self._install_using_sysinst() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2034, in _install_using_sysinst 10800) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 242, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 344, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 372, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-alpha args: ['/usr/pkg/bin/qemu-system-alpha', '-m', '64', '-drive', 'file=/bracket/alpha/test/2024.02.16.12.08.29/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/alpha/test/2024.02.16.12.08.29/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-kernel', '/bracket/alpha/test/2024.02.16.12.08.29/anita/netbsd_install', '-append', 'root=/dev/wd0a'] buffer (last 100 chars): b' \r\x1b[A \x1b[39;49m[ 169.9975815] entropy: ready\r\r\n' before (last 100 chars): b' \r\x1b[A \x1b[39;49m[ 169.9975815] entropy: ready\r\r\n' after: match: None match_index: None exitstatus: None flag_eof: False pid: 20016 child_fd: 9 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b'(?!)') 1: re.compile(b'a: Progress bar') 2: re.compile(b'Select medium|Install from') 3: re.compile(b'Enter the CDROM device') 4: re.compile(b'unused-group-should-not-match') 5: re.compile(b'Hit enter to continue') 6: re.compile(b'b: Use serial port com0') 7: re.compile(b'Please choose the timezone') 8: re.compile(b'essential things') 9: re.compile(b'Configure the additional items') 10: re.compile(b'Multiple CDs found') 11: re.compile(b'The following are the http site') 12: re.compile(b'Is the network information you entered accurate') 13: re.compile(b'I have found the following network interface') 14: re.compile(b'Which network device would you like to use') 15: re.compile(b'No allows you to continue anyway') 16: re.compile(b"Can't connect to") 17: re.compile(b'/sbin/newfs') 18: re.compile(b'Do you want to install the NetBSD bootcode') 19: re.compile(b'Do you want to update the bootcode in the Master Boot Record to the latest') 20: re.compile(b'([a-z]): Custom installation') 21: re.compile(b'(?!)') 22: re.compile(b'a: This is the correct geometry') 23: re.compile(b'a: Use one of these disks') 24: re.compile(b'([a-z]): Set sizes of NetBSD partitions') 25: re.compile(b'(?!)') 26: re.compile(b'a partitioning scheme') 27: re.compile(b'([a-z]): Use the entire disk') 28: re.compile(b'(?!)') 29: re.compile(b'Do you want to install the NetBSD bootcode') 30: re.compile(b'Do you want to update the bootcode') 31: re.compile(b'Please enter a name for your NetBSD disk') 32: re.compile(b'ready to install NetBSD on your hard disk') 33: re.compile(b'We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions') 34: re.compile(b'Your disk currently has a non-NetBSD partition') 35: re.compile(b'Sysinst could not automatically determine the BIOS geometry of the disk') 36: re.compile(b'Do you want to re-edit the disklabel partitions') 37: re.compile(b'Command: ') 38: re.compile(b'not enough entropy') 39: re.compile(b'Changing local password for root') 11268.77 real 220.94 user 286.48 sys