This is anita version 2.18 Using pexpect version 4.9.0 /usr/pkg/bin/anita \ --workdir=/bracket/alpha/test/2026.06.26.22.47.42/anita \ --structured-log-file=/bracket/alpha/test/2026.06.26.22.47.42/install.slog \ --vmm-args= \ --memory-size 64M \ install \ file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/ Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/instkernel/netbsd.gz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/modules.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/base.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/base32.tgz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/base32.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/etc.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/comp.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/gpufw.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/misc.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/rescue.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/tests.tgz... OK Downloading file:///bracket/alpha/test/2026.06.26.22.47.42/release/release/alpha/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ /bracket/alpha/test/2026.06.26.22.47.42/anita/install_tmp.iso \ /bracket/alpha/test/2026.06.26.22.47.42/anita/download Creating hard disk image... done. QEMU emulator version 10.0.2 Copyright (c) 2003-2025 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-alpha qemu package: qemu-10.0.2 glib2 package: glib2-2.84.2 qemu-system-alpha \ -m 64 \ -drive file=/bracket/alpha/test/2026.06.26.22.47.42/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive file=/bracket/alpha/test/2026.06.26.22.47.42/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -kernel /bracket/alpha/test/2026.06.26.22.47.42/anita/netbsd_install \ -append root=/dev/wd0a child pid is 18354 PCI: 0:1:0 class 0300 id 1013:00b8 PCI: region 0 (BAR 10): 10000000 PCI: region 1 (BAR 14): 12000000 PCI: 0:2:0 class 0200 id 8086:100e PCI: region 0 (BAR 10): 12020000 PCI: region 1 (BAR 14): 0000c000 PCI: intr pin 1 -> irq 12 PCI: 0:3:0 class 0101 id 1095:0646 PCI: region 0 (BAR 10): 0000c040 PCI: region 1 (BAR 14): 0000c048 PCI: region 2 (BAR 18): 0000c050 PCI: region 3 (BAR 1c): 0000c058 PCI: region 4 (BAR 20): 0000c060 PCI: intr pin 1 -> irq 16 PCI: 0:7:0 class 0601 id 8086:0484 CTB: PRINTERPORT[ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025, 2026 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.99.6 (INSTALL) #0: Fri Jun 26 23:30:28 UTC 2026 [ 1.0000000] root@babylon5.netbsd.org:/tmp/build/2026.06.26.22.47.42-alpha/obj/sys/arch/alpha/compile/INSTALL [ 1.0000000] AlphaServer ES40 ("Clipper"), 250MHz, s/n QEMU [ 1.0000000] 8192 byte page size, 1 processor. [ 1.0000000] total memory = 65536 KB [ 1.0000000] (120 KB reserved for PROM, 65416 KB used by NetBSD) [ 1.0000000] avail memory = 52848 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264A-0 (EV67) [ 1.0000000] cpu0: Architecture extensions: 0x1307 [ 1.0000000] qemu0 at mainbus0: Qemu virtual machine services [ 1.0000030] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0 [ 1.0000030] tsc0: 2 Dchips, 1 memory bus of 16 bytes [ 1.0000030] tsc0: arrays present: 0MB, 0MB, 0MB, 0MB, Dchip 0 rev 0 [ 1.0000030] tsp0 at tsc0 [ 1.0000030] pci0 at tsp0 bus 0 [ 1.0000030] vga0 at pci0 dev 1 function 0: vendor 1013 product 00b8 (rev. 0x00) [ 1.0000030] wsdisplay0 at vga0 (kbdmux ignored) [ 1.0000030] drm at vga0 not configured [ 1.0000030] wm0 at pci0 dev 2 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0000030] wm0: interrupting at dec 6600 irq 12 [ 1.0000030] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0000030] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0000030] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000030] cmdide0 at pci0 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07) [ 1.0000030] cmdide0: primary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: using dec 6600 irq 16 for native-PCI interrupt [ 1.0000030] atabus0 at cmdide0 channel 0 [ 1.0000030] cmdide0: secondary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: secondary channel ignored (disabled) [ 1.0000030] sio0 at pci0 dev 7 function 0: vendor 8086 product 0484 (rev. 0x03) [ 1.0000030] isa0 at sio0 [ 1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.0000030] com0: console [ 1.0000030] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO [ 1.0000030] pckbc0 at isa0 port 0x60-0x64 [ 1.0000030] pckbd0 at pckbc0 (kbd slot) [ 1.0000030] pckbc0: using irq 1 for kbd slot [ 1.0000030] wskbd0 at pckbd0 (mux ignored) [ 1.0000030] pms0 at pckbc0 (aux slot) [ 1.0000030] pckbc0: using irq 12 for aux slot [ 1.0000030] wsmouse0 at pms0 (mux ignored) [ 1.0000030] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0000030] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.0000030] tsciic at tsc0 [ 1.0000030] not configured [ 1.0000030] WARNING: system needs entropy for security; see entropy(7) [ 1.0000030] Using the Qemu CPU alarm for 50 Hz hardclock. [ 1.0000030] atapibus0 at atabus0: 2 targets [ 1.4066919] cd0 at atapibus0 drive 1: cdrom removable [ 1.4066919] wd0 at atabus0 drive 0 [ 1.4066919] wd0: [ 1.4066919] wd0: 2048 MB, 4161 cyl, 16 head, 63 sec, 512 bytes/sect x 4194304 sectors [ 1.8354325] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 2.2854175] fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec [ 2.3092527] root on md0a dumps on md0b [ 2.3092527] root file system type: ffs [ 2.3092527] kern.module.path=/stand/alpha/11.99.6/modules Terminal type? [vt100] xterm Erase set to backspace. erase ^?, werase ^W, kill ^U, intr ^C NetBSD/alpha 11.99.6 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in English xx b: Installation auf Deutsch xx c: Mensajes de instalacion en castellano xx d: Messages d'installation en franXais xx e: Komunikaty instalacyjne w jezyku polskim xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-11.99.6 Install System xx xx>a: Install NetBSD to hard disk xx b: Upgrade NetBSD on a hard disk xx c: Re-install sets or install additional sets xx d: Reboot the computer xx e: Utility menu xx f: Config menu xx x: Exit Install System xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD? The most common disk types are:- wd: SATA, ATA, or IDE- sd: SCSI or removable USB disk- ld: NVMe (e.g. M.2 card), SD/MMC card, or virtual disk lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xx xx>a: wd0 (2.0G, QEMU HARDDISK) xx b: Extended partitioning (software RAID, etc...) xx x: Exit xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 2048M. A full installation requires at least 1156M without X and at least 1456M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do? xx xx>a: Set sizes of NetBSD partitions xx b: Use default partition sizes xx c: Manually define partitions xx x: Cancel xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1138688 (3932160) + / b: 262144 c: 0 /tmp (mfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 2793472 sec. a: 1138688 (3932160) + / >b: 262144 b: 262144 >c: 0 /tmp (mfs) c: 0 /tmp (mfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 2793472 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs. Total size: 2048M, free: 0B Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a: 0 3932159 3932160 FFS IN / b: 3932160 4194303 262144 swap c: 0 4194303 4194304 Whole disk ------------ ------------ ------------ -------- ---- ---------------- e: Change input units (sectors/cylinders/MB/GB) f: Edit name of the disk g: Clone external partition(s) h: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Status: RunningCommand: /sbin/newfs -V2 -O 1 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq newfs: Cannot open `/etc/fstab': No such file or directory /dev/rwd0a: 1920.0MB (3932160 sectors) block size 16384, fragment size 2048 using 11 cylinder groups of 8989607068696576.00MB, 11171 blks, 22016 inodes. ........................................... .................................... Finished Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot /dev/rwd0c /usr/mdec/bootxx_ffs qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xx xx>a: Full installation xx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ---------------------------------- -------- a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Manual pages (HTML) No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >j: Miscellaneous NoYes j: Miscellaneous Yes >k: Recovery tools NoYes k: Recovery tools Yes >l: Test programs NoYes l: Test programs Yes >n: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programming No xx c: X11 configuration No xx d: X11 fonts No xx e: X11 servers No xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No firmware Yes No ML) No Yes Yes Yes tools No None sets None n: X11 sets None >o: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sources No xx b: Base sources No xx c: Share sources No xx d: GNU sources No xx e: X11 sources No xx f: Debug symbols No xx g: X11 debug symbols No xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No firmware Yes No ML) No Yes Yes Yes tools No None sets None sets o: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 9, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install from xx xx>a: CD-ROM / DVD xx b: HTTPS xx c: HTTP xx d: FTP xx e: NFS xx f: Floppy xx g: Unmounted fs xx h: Local directory xx i: Skip set xx j: Skip set group xx k: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA61% |*********************9008 KiB 5.55 M00:00 ETA98************* | 144006.06100*| 1464 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/modules.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA47% |****************8008 KiB 4.71 M00:01 ETA63******107442100*************| 1702080 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/base.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA3% |*8496 KiB 5.33 M00:37 ETA6% |**13200754 ETA88736405 ETA10% |***2345253% |****85924 ETA6*3437633 ETA8*934422 ETA21*46192410 ETA3*512483429 ETA6*57227862000327 ETA31*786456 ETA4*729605 ETA6*844824 ETA8*8316041*916022 ETA4*9444831 ETA6*993610 ETA9* 103 M319 ETA52*858 ETA41467 ETA7*20406 ETA60**65 ETA231394 ETA5*7403 ETA8*4232 ETA71*821 ETA3*5310 ETA45296*60409 ETA8*328 ETA961582*7137 ETA4*626 ETA6*8015 ETA8504 ETA91*90093 ETA2*356* | 201101 ETA9*730 ETA80100*4.99 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/etc.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5000 KiB 3.98 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/comp.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA18624 KiB 5.61 M01:27 ETA21356095 ETA3% |*20272931 ETA56608919 ETA6% |**338006.165 ETA7916076 ETA9% |***46512154 ETA105244843 ETA1895232 ETA2% |****6413605379525.814 ETA7103636 ETA44536428 ETA5*81202620 ETA81224151 ETA633764.984 ETA6680865 ETA79344747 ETA91696628 ETA8*5568579 ETA9 99 M656 ETA21*105713 ETA21022 ETA3*541 ETA4228218 ETA5886 ETA7*35973 ETA8435.050 ETA30*501308 ETA18205 ETA2*6444 ETA47182 ETA5*8330 ETA68340:59 ETA7958 ETA8*9467 ETA40*20175 ETA164 ETA21293 ETA3*8412 ETA42421 ETA5910 ETA7*35348 ETA93984369*857 ETA505466 ETA195 ETA2*653 ETA370452 ETA6*8170 ETA77939 ETA8*94408 ETA930026 ETA61*635 ETA21244 ETA3*753 ETA42572 ETA6*3190 ETA775029 ETA84418 ETA9*5037 ETA71755 ETA2*6484 ETA4703 ETA5*7602 ETA68310 ETA8*91319 ETA58 ETA80*40347 ETA1856 ETA2155 ETA4*2064 ETA573 ETA902 ETA6*3411 ETA84020 ETA9*5109 ETA958905148 ETA305461708367 ETA6012*1272331743508336 ETA64.9974889691774714425 ETA5*669974 ETA6815333 ETA507657732 ETA809479038*10372301 ETA3263401735197080 ETA875004100*| 501 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/gpufw.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 6144497.2200:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/misc.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA41% |**************6192 KiB 4.49 M00:01 ETA66*********9976158*******129603.840 ETA100*****| 14928 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/rescue.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA49% |*****************6280 KiB 4.34 M00:01 ETA100******************| 12645.310 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/tests.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA6% |**5800 KiB 3.60 M00:22 ETA87416036 ETA11% |***106082.975 ETA6% |*****43.351 ETA24***219529316 ETA9**68084.114 ETA35**3164203 ETA9*536112 ETA41*74243.843 ETA6**41648921 ETA52**72724.040 ETA6*50904009 ETA60**46323.988 ETA4*769637 ETA71**638804.046 ETA4*724815 ETA80***7207254 ETA2383.913 ETA5*67688690** | 8114482 ETA4* | 8440051 ETA5* | 856167166432600 ETA8* | 88080519928842100*| 8974038 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: RunningCommand: /bin/sh MAKEDEV all qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /usr/sbin/certctl rehash qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Traceback (most recent call last): File "/usr/pkg/bin/anita", line 163, in status = main() ^^^^^^ File "/usr/pkg/bin/anita", line 136, in main a.install() File "/usr/pkg/lib/python3.12/site-packages/anita.py", line 2527, in install self._install() File "/usr/pkg/lib/python3.12/site-packages/anita.py", line 1604, in _install self._install_using_sysinst() File "/usr/pkg/lib/python3.12/site-packages/anita.py", line 2117, in _install_using_sysinst r = child.expect([ ^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/anita.py", line 270, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/pexpect/spawnbase.py", line 354, in expect return self.expect_list(compiled_pattern_list, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/pexpect/spawnbase.py", line 383, in expect_list return exp.expect_loop(timeout) ^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) ^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-alpha args: ['/usr/pkg/bin/qemu-system-alpha', '-m', '64', '-drive', 'file=/bracket/alpha/test/2026.06.26.22.47.42/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/alpha/test/2026.06.26.22.47.42/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-kernel', '/bracket/alpha/test/2026.06.26.22.47.42/anita/netbsd_install', '-append', 'root=/dev/wd0a'] buffer (last 100 chars): b'[24;1H \x1b[1;1H\x1b[39;49m' before (last 100 chars): b'[24;1H \x1b[1;1H\x1b[39;49m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 18354 child_fd: 8 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b'(?!)') 1: re.compile(b'a: Progress bar') 2: re.compile(b'Select medium|Install from') 3: re.compile(b'Enter the CDROM device') 4: re.compile(b'unused-group-should-not-match') 5: re.compile(b'Hit enter to continue') 6: re.compile(b'b: Use serial port com0') 7: re.compile(b'Please choose the timezone') 8: re.compile(b'essential things') 9: re.compile(b'Configure the additional items') 10: re.compile(b'Multiple CDs found') 11: re.compile(b'The following are the http site') 12: re.compile(b'Is the network information you entered accurate') 13: re.compile(b'I have found the following network interface') 14: re.compile(b'Which network device would you like to use') 15: re.compile(b'No allows you to continue anyway') 16: re.compile(b"Can't connect to") 17: re.compile(b'/sbin/newfs') 18: re.compile(b'Do you want to install the NetBSD bootcode') 19: re.compile(b'Do you want to update the bootcode in the Master Boot Record to the latest') 20: re.compile(b'([a-z]): Custom installation') 21: re.compile(b'(?!)') 22: re.compile(b'a: This is the correct geometry') 23: re.compile(b'a: Use one of these disks') 24: re.compile(b'([a-z]): Set sizes of NetBSD partitions') 25: re.compile(b'(?!)') 26: re.compile(b'a partitioning scheme') 27: re.compile(b'([a-z]): Use the entire disk') 28: re.compile(b'(?!)') 29: re.compile(b'Do you want to install the NetBSD bootcode') 30: re.compile(b'Do you want to update the bootcode') 31: re.compile(b'Please enter a name for your NetBSD disk') 32: re.compile(b'ready to install NetBSD on your hard disk') 33: re.compile(b'We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions') 34: re.compile(b'Your disk currently has a non-NetBSD partition') 35: re.compile(b'Sysinst could not automatically determine the BIOS geometry of the disk') 36: re.compile(b'Do you want to re-edit the disklabel partitions') 37: re.compile(b'Command: ') 38: re.compile(b'not enough entropy') 39: re.compile(b'Changing local password for root') 40: re.compile(b'(Accept partition sizes)|(Go on)') 11091.53 real 293.51 user 12.31 sys