This is anita version 1.44 /usr/pkg/bin/anita \ --workdir=/bracket/hpcmips/test/2018.06.25.14.29.17/anita \ --structured-log-file=/bracket/hpcmips/test/2018.06.25.14.29.17/install.slog \ --vmm-args= \ --test-timeout \ 120000 \ --memory-size \ 48M \ install \ file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/ Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/netbsd.gz... OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/sets/modules.tgz... OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/sets/base.tgz... OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/sets/etc.tgz... OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/sets/comp.tgz... OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/sets/misc.tgz... OK Downloading file:///bracket/hpcmips/test/2018.06.25.14.29.17/release/hpcmips/binary/sets/tests.tgz... OK makefs -t cd9660 -o rockridge /bracket/hpcmips/test/2018.06.25.14.29.17/anita/install_tmp.iso /bracket/hpcmips/test/2018.06.25.14.29.17/anita/download Creating hard disk image... done. gxemul -M \ 48M \ -d \ /bracket/hpcmips/test/2018.06.25.14.29.17/anita/wd0.img \ -emobilepro880 \ -d \ /bracket/hpcmips/test/2018.06.25.14.29.17/anita/install_tmp.iso \ /bracket/hpcmips/test/2018.06.25.14.29.17/anita/download/hpcmips/installation/netbsd.gz child pid is 4740 GXemul 0.6.0.1 Copyright (C) 2003-2014 Anders Gavare Read the source code and/or documentation for other Copyright messages. Simple setup... net: simulated network: 10.0.0.0/8 (max outgoing: TCP=100, UDP=100) simulated gateway+nameserver: 10.0.0.254 (60:50:40:30:20:10) simulated nameserver uses real nameserver 140.160.30.203 machine: memory: 48 MB cpu0: VR4121 (I+D = 16+8 KB) machine: NEC MobilePro 880 bootstring: netbsd.gz diskimage: /bracket/hpcmips/test/2018.06.25.14.29.17/anita/wd0.img IDE DISK id 0, read/write, 1536 MB (3145728 sectors) diskimage: /bracket/hpcmips/test/2018.06.25.14.29.17/anita/install_tmp.iso IDE CD-ROM id 1, read-only, 186 MB (382136 sectors) gunziping /bracket/hpcmips/test/2018.06.25.14.29.17/anita/download/hpcmips/installation/netbsd.gz loading /tmp/gxemul.Bup2w8oF6CYp removing /tmp/gxemul.Bup2w8oF6CYp cpu0: starting at 0xffffffff80001000 NOTE: This is a LEGACY emulation mode. ------------------------------------------------------------------------------- cpu0: trying to write an invalid pagemask 0x1fffe000 to COP0_PAGEMASK [ 1.0000000] mem_cluster_cnt = 3 [ 1.0000000] mem_clusters[0] = {0,0x8ce000} [ 1.0000000] mem_clusters[1] = {0x8ce000,0x1732000} [ 1.0000000] mem_clusters[2] = {0x2000000,0x1000000} [ 1.0000000] phys segment: 0x8ce000 @ 0 [ 1.0000000] skipping 0x8cd000 @ 0x1000 (kernel) [ 1.0000000] phys segment: 0x1732000 @ 0x8ce000 [ 1.0000000] adding 0x1732000 @ 0x8ce000 to freelist 0 [ 1.0000000] phys segment: 0x1000000 @ 0x2000000 [ 1.0000000] adding 0x1000000 @ 0x2000000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.20 (RAMDISK) #0: Tue Jun 26 18:54:21 UTC 2018 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2018.06.25.14.29.17-hpcmips/obj/sys/arch/hpcmips/compile/RAMDISK [ 1.0000000] NEC MobilePro 880 (NEC VR4121 rev2.12 98.304MHz) [ 1.0000000] total memory = 49152 KB [ 1.0000000] avail memory = 39048 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floating point [ 1.0000000] cpu0: 32 TLB entries, 256MB max page size [ 1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache [ 1.0000000] cpu0: 8KB/16B direct-mapped write-back L1 data cache [ 1.0000000] vr4102ip0 at mainbus0 [ 1.0000000] vrbcu0 at vr4102ip0 addr 0x0b000000-001f [ 1.0000000] vrbcu0: CPU 98.304MHz, bus 32.768MHz, ram 49.152MHz [ 1.0000000] vrcmu0 at vr4102ip0 addr 0x0b000060-007f [ 1.0000000] vrgiu0 at vr4102ip0 addr 0x0b000100-011f [ 1.0000000] hpcioman9 at vrgiu0 [ 1.0000000] hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low [ 1.0000000] button1 at vrgiu0 port=3 id=13 active=high sense=edge [ 1.0000000] pwctl0 at vrgiu0 port=46 id=0 on=1 [ 1.0000000] vrdmaau0 at vr4102ip0 addr 0x0b000020-0037 [ 1.0000000] vrdcu0 at vr4102ip0 addr 0x0b000040-004b [ 1.0000000] com0 at vr4102ip0 addr 0x0c000000-0007: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df [ 1.0000000] vrkiu0 at vr4102ip0 addr 0x0b000180-019f [ 1.0000000] hpckbd0 at vrkiu0 [ 1.0000000] wskbd0 at hpckbd0 mux 1 [ 1.0000000] vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf [ 1.0000000] vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7 [ 1.0000000] vrled0 at vr4102ip0 addr 0x0b000240-024f [ 1.0000000] vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf [ 1.0000000] wsmouse0 at vrpiu0 mux 0 vrpiu0: WARNING: powerhook_establish is deprecated [ 1.0000000] vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff [ 1.0000000] pci0 at vrc4172pci0 bus 0 [ 1.0000000] vrc4172pwm0 at vr4102ip0 addr 0x15003880-3885 [ 1.0000000] vraiu0 at vr4102ip0 addr 0x0b000160-017f [ 1.0000000] audio0 at vraiu0: half duplex, playback, capture, mmap [ 1.0000000] vraiu0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100 [ 1.0000000] vraiu0: Latency: 69 milliseconds [ 1.0000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.0000000] wsbell at spkr0 not configured [ 1.0000000] vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000 [ 1.0000000] isa0 at vrisab0 [ 1.0000000] pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827 [ 1.0000000] pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B [ 1.0000000] pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only [ 1.0000000] pcmcia0 at pcic0 controller 0 socket 0 [ 1.0000000] pcmcia1 at pcic0 controller 0 socket 1 [ 1.0000000] pcmcia at pcic0 controller 1 socket 0 not configured [ 1.0000000] bivideo0 at mainbus0: pseudo video controller [ 1.0000000] bivideo0: framebuffer address: 0x8a0ea600 [ 1.0000000] hpcfb0 at bivideo0 [ 1.0000000] wsdisplay0 at hpcfb0 kbdmux 1 [ 1.0000000] btnmgr0 at mainbus0 [ 1.0000000] wskbd1 at btnmgr0 mux 1 [ 1.0000000] hpcapm0 at mainbus0: pseudo power management module [ 1.0000000] apmdev0 at hpcapm0: Power Management spec V1.2 [ 1.0000030] pcic0: using irq 589827 for socket events pcic0: WARNING: powerhook_establish is deprecated pcic0: WARNING: powerhook_establish is deprecated [ 1.6142608] wdc1 at pcmcia0 function 0: < , NinjaATA-, V1.0, AP00 > [ 1.6142608] pcic0: port 0x180-0x187 [ 1.6142608] pcic0: port 0x386-0x387 [ 1.6142608] wdc1: i/o mapped mode [ 1.6142608] pcmcia0: card irq 3 [ 2.2749664] atabus0 at wdc1 channel 0 [ 2.2749664] atapibus0 at atabus0: 2 targets [ 2.2749664] cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 [ 2.2749664] wd0: [ 2.2749664] wd0: 1536 MB, 3121 cyl, 16 head, 63 sec, 512 bytes/sect x 3145968 sectors WARNING: 3 errors while detecting hardware; check system log. [ 2.6747161] boot device: wd0 [ 2.6747161] pcmcia0: card irq 3 [ 3.0952789] root on md0a dumps on md0b [ 3.0952789] root file system type: ffs [ 3.0952789] kern.module.path=/stand/hpcmips/8.99.20/modules [ 3.0994903] pid 1(init): ABI set to O32 (e_flags=0x1007) erase ^?, werase ^W, kill ^U, intr ^C NetBSD/hpcmips 8.99.20 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.20 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes[ 3.6953765] pcmcia0: card irq 3 [ 4.3956634] pcmcia0: card irq 3 On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xxxx>a: wd0 (1.5G, wd0.img)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqj[ 5.1961700] pcmcia0: card irq 3 [ 5.8961212] pcmcia0: card irq 3 [ 6.6565887] pcmcia0: card irq 3 Sysinst could not automatically determine the BIOS geometry of the disk. The physical geometry is 3121 cylinders 16 sectors 63 heads You will be prompted for the geometry. Please enter the number of sectors per track (maximum 63) and number of heads (maximum 256) that the BIOS uses to access the disk. The number of cylinders will be calculated from the disk size. sectors [63]: heads [255]: We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire disk xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1536 Megabytes. A full installation requires at least 288 Megabytes without X and at least 327 Megabytes if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installation xxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MB Cylinders Sectors Filesystem >a: 256 (1407) 522 526176 + / b: 128261 263088 swap c: 00 0 /tmp (mfs) d: 00 0 /usr e: 00 0 /var f: 00 0 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1150 MB, 12 free partitions. a: 256 (1407) 522 526176 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (mfs) c: 0 0 0 /tmp (mfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1150 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a: 0 1406 1407 FFSv1 Yes Yes / b: 1407 1535 128 swap c: 0 1535 1536 NetBSD partition d: 0 1535 1536 Whole disk e: 0 0 0 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... [ 8.2973968] pcmcia0: card irq 3 Status: Running Command: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- FinishedHit enter to continue Status: Running Command: /sbin/newfs -V2 -O 1 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 22272 inodes. ...............................................................................Finished Status: Running Command: /sbin/mount -tffs -o async /dev/wd0a /targetroot/ -------------------------------------------------------------------------------- FinishedHit enter to continue The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution set Selected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel (TX3912)No c: Kernel modulesYes d: BaseYes e: Configuration files (/etc) Yes f: Compiler toolsNo g: GamesNo h: Manual pagesNo i: MiscellaneousNo j: Test programsNo k: Text processing tools No l: X11 setsNone m: Source and debug sets None >x: Install selected sets>f: Compiler tools No x: Install selected setsYes f: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >j: Test programs NoYes j: Test programs Yes >l: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets l: X11 sets None >m: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets m: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVDxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fs xx g: Local directory xx h: Skip setxx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj[ 22.4832488] cd_setblksize: trying to change bsize, but no blk_desc Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /hpcmips/binary/sets c: Source set directory /source/sets d: Exit x: Continuelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkxxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjdevice [cd0a]: cd0d > >a: Device cd0d b: Binary set directory /hpcmips/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0d >x: Continue Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA46% |****************2496 KiB 1.84 MiB/s 00:01 ETA61*****3328 KiB 1.92100**************| 5410 KiB 2.210 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA14% |****960 KiB 1.40 MiB/s 00:03 ETA53% |******************352541 ETA100*****************| 663670 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/base.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA12368 KiB 1.71 MiB/s 01:31 ETA23648523 ETA6% |**9792 KiB 2.3403 ETA1088091 ETA84144 KiB 2.215 ETA9% |***5168 KiB 2.147 ETA118432 KiB 1.9711 ETA2% |****20544 KiB 2.0009 ETA3259218 ETA784 KiB 1.986% |*****6240543267 ETA8% |******3001656 ETA99775 ETA21% |*******44944 ETA68833% |********878403 ETA976 KiB 1.884 ETA54192072 ETA7*44868691231 ETA30*99840:59 ETA2*5363228 ETA3414405*71527 ETA760544 KiB 1.785 ETA1829*457664 ETA41*771252 ETA299533*7097641 ETA12935456049 ETA8167*81447 ETA852850*8166426 ETA20485 ETA2*53763 ETA632494081 ETA5*792793056139 ETA31229*74087 ETA62* 99 MiB 1.734 ETA4*10222 ETA36*60 ETA8829 ETA70*117 ETA2*45 ETA4713 ETA6*211 ETA28*519 ETA80*87 ETA193*32 MiB 1.695 ETA553 ETA7*9 MiB 1.701 ETA8400 ETA9* | 141 MiB 1.68903609 ETA1657 ETA2* | 14736 ETA384915 ETA7* | 15432 ETA9* | 15840 ETA1100*| 159 MiB 1.598 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/etc.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA30% |**********1280 KiB 1.92 MiB/s 00:01 ETA10*************************| 421280 ETA5 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/comp.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA832 KiB 1.98 MiB/s 02:58 ETA14928 KiB 1.843:10 ETA52428512309 ETA3% |*11075640 ETA2480 KiB 1.6231 ETA324812 ETA460641 ETA7088 KiB 1.4750 ETA520224944 ETA8677 ETA6% |**329693 ETA51522 ETA78800 KiB 1.5235 ETA92816 ETA83206405 ETA83214 ETA9% |***9604816 KiB 1.478 ETA5328541 ETA584107696386522 ETA14153339 ETA2% |****422446 ETA5183943 ETA71075 ETA3960056 ETA50304422244208 KiB 1.2856 ETA395% |*****59367747282 ETA660416 KiB 1.3047 ETA7368021 ETA8% |******6368437 ETA99552 ETA71936727 ETA20% |*******430493 ETA5136818912 KiB 1.4117 ETA2833940 ETA3% |********486408 ETA479367 ETA8575924161 ETA6*696072:56 ETA7964893 ETA 99 MiB 1.501 ETA8103147 ETA9*6 ETA3074 ETA3 ETA8111339 ETA28 ETA2*645 ETA392 ETA42250 ETA5*528 ETA6865 ETA304 ETA722 ETA31 ETA8*60 ETA719 ETA94077 ETA40*44 ETA1881 ETA25208 ETA3*695 ETA560 MiB 1.601 ETA16*4 MiB 1.580 ETA71:59 ETA7997 ETA87286 ETA9*53 ETA72 ETA50971 ETA18249 ETA32*687 ETA76 ETA3904 ETA432 ETA45*70 ETA839 ETA62017 ETA755 ETA4 ETA8*82 ETA991290 ETA60*5828 ETA797 ETA1221 MiB 1.604 ETA23 ETA3*60 ETA743018 ETA1536 ETA45 ETA6*73 ETA7941 MiB 1.591 ETA8409 ETA59*878 ETA705096 ETA285 ETA134 ETA42*72 ETA91 ETA3610:59 ETA24577 ETA5*785 ETA97667273 ETA32 ETA761 ETA70 ETA8*948 ETA9827 ETA80*54 ETA182 ETA92920 ETA339 ETA588 ETA3*86 ETA43014 ETA552 ETA1 ETA66*70 ETA9729 ETA8136 ETA465 ETA9* | 3174 ETA93 ETA902162 ETA251 ETA341430 ETA526119 ETA07 MiB 1.4982* | 328768 ETA95330211 MiB 1.397 ETA387265343426 ETA4515 ETA604 ETA75* | 3393 ETA402 ETA29620 ETA309 ETA488 ETA57767 ETA6756 ETA84395 ETA8*215004 ETA1918763 ETA2549341 ETA520 ETA6100* Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/misc.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA7% |**1088 KiB 1.57 MiB/s 00:08 ETA35% |************5376 KiB 1.85 ETA66324 ETA59********9024 KiB 1.73 ETA60*280882******* | 1260831 ETA3* | 127361100******| 1523040 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA3% |*1216 KiB 926.69 KiB/s 00:37 ETA7% |**2624 KiB 1.26 M25 ETA9% |***3520 KiB 1.196 ETA18% |******6592 KiB 1.380 ETA9976 KiB 1.047 ETA26% |*********95393 ETA30*11200 KiB 1.112 ETA4*260850 ETA6*324319 ETA9*4464 KiB 1.0220 ETA51744**6320 KiB 985.59 K5704 KiB 994.1319 ETA54***9840 KiB 1.07 M5 ETA60***22144 KiB 1.132 ETA6**425620 ETA85024409 ETA76***764877 ETA78286 ETA83*** | 3027265 ETA400592*** | 3347282 ETA38567* | 35450 ETA584100**| 363703 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: Running Command: /bin/sh MAKEDEV all -------------------------------------------------------------------------------- Finished Status: Running Command: /etc/rc.d/random_seed stop -------------------------------------------------------------------------------- Saved entropy to /var/db/entropy-file. Finished The extraction of the selected sets for NetBSD-8.99.20 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj The extraction of the selected sets for NetBSD-8.99.20 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first.lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj Configure the additional items as needed. a: Configure networkconfigure b: TimezoneUTC c: Root shell/bin/sh d: Change root password***EMPTY*** e: Enable installation of binary packagesinstall f: Fetch and unpack pkgsrc for building from source install g: Enable sshdNO h: Enable ntpdNO i: Run ntpdate at bootNO j: Enable mdnsdNO k: Enable xdmNO l: Enable cgdYES m: Enable lvmNO n: Enable raidframeYES o: Add a user >x: Finished configuring The installation of NetBSD-8.99.20 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot. At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj NetBSD/hpcmips 8.99.20 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.20 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxraceback (most recent call last): File "/usr/pkg/bin/anita", line 150, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1623, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1590, in _install child.expect("(Hit enter to continue)|(x: Exit Install System)|(#)|(halting machine)|(halted by root)") File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 116, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 80, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '48M', '-d', '/bracket/hpcmips/test/2018.06.25.14.29.17/anita/wd0.img', '-emobilepro880', '-d', '/bracket/hpcmips/test/2018.06.25.14.29.17/anita/install_tmp.iso', '/bracket/hpcmips/test/2018.06.25.14.29.17/anita/download/hpcmips/installation/netbsd.gz'] buffer (last 100 chars): 'nstall sets or install additional sets \x0ex\x0f\x1b[19;16H\x00\x00\x00\x0ex\x0f d: Reboot the computer\x1b[19;64H\x00\x00\x00\x0ex\x0f\x1b[20;16' before (last 100 chars): 'nstall sets or install additional sets \x0ex\x0f\x1b[19;16H\x00\x00\x00\x0ex\x0f d: Reboot the computer\x1b[19;64H\x00\x00\x00\x0ex\x0f\x1b[20;16' after: match: None match_index: None exitstatus: None flag_eof: False pid: 4740 child_fd: 11 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(Hit enter to continue)|(x: Exit Install System)|(#)|(halting machine)|(halted by root)") 1152.37 real 3.23 user 10.51 sys