This is anita version 1.46 Using pexpect version 4.6.0 /usr/pkg/bin/anita \ --workdir=/bracket/hpcmips/test/2018.11.27.10.38.14/anita \ --structured-log-file=/bracket/hpcmips/test/2018.11.27.10.38.14/install.slog \ --vmm-args= \ --test-timeout \ 120000 \ --memory-size \ 48M \ install \ file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/ Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/netbsd.gz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/modules.tgz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/base.tgz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/etc.tgz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/comp.tgz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/misc.tgz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/tests.tgz... OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.11.27.10.38.14/release/hpcmips/binary/sets/tests.tar.xz... missing but optional, so that's OK makefs \ -t \ cd9660 \ -o \ rockridge \ /bracket/hpcmips/test/2018.11.27.10.38.14/anita/install_tmp.iso \ /bracket/hpcmips/test/2018.11.27.10.38.14/anita/download Creating hard disk image... done. gxemul \ -M \ 48M \ -d \ /bracket/hpcmips/test/2018.11.27.10.38.14/anita/wd0.img \ -emobilepro880 \ -d \ /bracket/hpcmips/test/2018.11.27.10.38.14/anita/install_tmp.iso \ /bracket/hpcmips/test/2018.11.27.10.38.14/anita/download/hpcmips/installation/netbsd.gz child pid is 21365 GXemul 0.6.0.1 Copyright (C) 2003-2014 Anders Gavare Read the source code and/or documentation for other Copyright messages. Simple setup... net: simulated network: 10.0.0.0/8 (max outgoing: TCP=100, UDP=100) simulated gateway+nameserver: 10.0.0.254 (60:50:40:30:20:10) simulated nameserver uses real nameserver 140.160.30.203 machine: memory: 48 MB cpu0: VR4121 (I+D = 16+8 KB) machine: NEC MobilePro 880 bootstring: netbsd.gz diskimage: /bracket/hpcmips/test/2018.11.27.10.38.14/anita/wd0.img IDE DISK id 0, read/write, 1536 MB (3145728 sectors) diskimage: /bracket/hpcmips/test/2018.11.27.10.38.14/anita/install_tmp.iso IDE CD-ROM id 1, read-only, 179 MB (368532 sectors) gunziping /bracket/hpcmips/test/2018.11.27.10.38.14/anita/download/hpcmips/installation/netbsd.gz loading /tmp/gxemul.G9fZ5MtHKOcS removing /tmp/gxemul.G9fZ5MtHKOcS cpu0: starting at 0xffffffff80001000 NOTE: This is a LEGACY emulation mode. ------------------------------------------------------------------------------- cpu0: trying to write an invalid pagemask 0x1fffe000 to COP0_PAGEMASK [ 1.0000000] mem_cluster_cnt = 3 [ 1.0000000] mem_clusters[0] = {0,0x8a8000} [ 1.0000000] mem_clusters[1] = {0x8a8000,0x1758000} [ 1.0000000] mem_clusters[2] = {0x2000000,0x1000000} [ 1.0000000] phys segment: 0x8a8000 @ 0 [ 1.0000000] skipping 0x8a7000 @ 0x1000 (kernel) [ 1.0000000] phys segment: 0x1758000 @ 0x8a8000 [ 1.0000000] adding 0x1758000 @ 0x8a8000 to freelist 0 [ 1.0000000] phys segment: 0x1000000 @ 0x2000000 [ 1.0000000] adding 0x1000000 @ 0x2000000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.26 (RAMDISK) #0: Tue Nov 27 18:44:14 UTC 2018 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2018.11.27.10.38.14-hpcmips/obj/sys/arch/hpcmips/compile/RAMDISK [ 1.0000000] NEC MobilePro 880 (NEC VR4121 rev2.12 98.304MHz) [ 1.0000000] total memory = 49152 KB [ 1.0000000] avail memory = 39200 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floating point [ 1.0000000] cpu0: 32 TLB entries, 256MB max page size [ 1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache [ 1.0000000] cpu0: 8KB/16B direct-mapped write-back L1 data cache [ 1.0000000] vr4102ip0 at mainbus0 [ 1.0000000] vrbcu0 at vr4102ip0 addr 0x0b000000-001f [ 1.0000000] vrbcu0: CPU 98.304MHz, bus 32.768MHz, ram 49.152MHz [ 1.0000000] vrcmu0 at vr4102ip0 addr 0x0b000060-007f [ 1.0000000] vrgiu0 at vr4102ip0 addr 0x0b000100-011f [ 1.0000000] hpcioman9 at vrgiu0 [ 1.0000000] hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low [ 1.0000000] button1 at vrgiu0 port=3 id=13 active=high sense=edge [ 1.0000000] pwctl0 at vrgiu0 port=46 id=0 on=1 [ 1.0000000] vrdmaau0 at vr4102ip0 addr 0x0b000020-0037 [ 1.0000000] vrdcu0 at vr4102ip0 addr 0x0b000040-004b [ 1.0000000] com0 at vr4102ip0 addr 0x0c000000-0007: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df [ 1.0000000] vrkiu0 at vr4102ip0 addr 0x0b000180-019f [ 1.0000000] hpckbd0 at vrkiu0 [ 1.0000000] wskbd0 at hpckbd0 mux 1 [ 1.0000000] vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf [ 1.0000000] vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7 [ 1.0000000] vrled0 at vr4102ip0 addr 0x0b000240-024f [ 1.0000000] vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf [ 1.0000000] wsmouse0 at vrpiu0 mux 0 vrpiu0: WARNING: powerhook_establish is deprecated [ 1.0000000] vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff [ 1.0000000] pci0 at vrc4172pci0 bus 0 [ 1.0000000] vrc4172pwm0 at vr4102ip0 addr 0x15003880-3885 [ 1.0000000] vraiu0 at vr4102ip0 addr 0x0b000160-017f [ 1.0000000] audio0 at vraiu0: half duplex, playback, capture, mmap [ 1.0000000] vraiu0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100 [ 1.0000000] vraiu0: Latency: 69 milliseconds [ 1.0000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.0000000] wsbell at spkr0 not configured [ 1.0000000] vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000 [ 1.0000000] isa0 at vrisab0 [ 1.0000000] pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827 [ 1.0000000] pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B [ 1.0000000] pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only [ 1.0000000] pcmcia0 at pcic0 controller 0 socket 0 [ 1.0000000] pcmcia1 at pcic0 controller 0 socket 1 [ 1.0000000] pcmcia at pcic0 controller 1 socket 0 not configured [ 1.0000000] bivideo0 at mainbus0: pseudo video controller [ 1.0000000] bivideo0: framebuffer address: 0x8a0ea600 [ 1.0000000] hpcfb0 at bivideo0 [ 1.0000000] wsdisplay0 at hpcfb0 kbdmux 1 [ 1.0000000] btnmgr0 at mainbus0 [ 1.0000000] wskbd1 at btnmgr0 mux 1 [ 1.0000000] hpcapm0 at mainbus0: pseudo power management module [ 1.0000000] apmdev0 at hpcapm0: Power Management spec V1.2 [ 1.0000030] pcic0: using irq 589827 for socket events pcic0: WARNING: powerhook_establish is deprecated pcic0: WARNING: powerhook_establish is deprecated [ 1.6062652] wdc1 at pcmcia0 function 0: < , NinjaATA-, V1.0, AP00 > [ 1.6062652] pcic0: port 0x180-0x187 [ 1.6062652] pcic0: port 0x386-0x387 [ 1.6062652] wdc1: i/o mapped mode [ 1.6062652] pcmcia0: card irq 3 [ 2.2668792] atabus0 at wdc1 channel 0 [ 2.2668792] atapibus0 at atabus0: 2 targets [ 2.2668792] cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 [ 2.2668792] wd0: [ 2.2668792] wd0: 1536 MB, 3121 cyl, 16 head, 63 sec, 512 bytes/sect x 3145968 sectors WARNING: 3 errors while detecting hardware; check system log. [ 2.6667510] boot device: wd0 [ 2.6667510] pcmcia0: card irq 3 [ 3.0874053] root on md0a dumps on md0b [ 3.0874053] root file system type: ffs [ 3.0874053] kern.module.path=/stand/hpcmips/8.99.26/modules erase ^?, werase ^W, kill ^U, intr ^C NetBSD/hpcmips 8.99.26 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim x If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.26 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes[ 4.5078155] pcmcia0: card irq 3 [ 5.0484344] pcmcia0: card irq 3 On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xxxx>a: wd0 (1.5G, wd0.img)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqj[ 5.6482879] pcmcia0: card irq 3 [ 6.3486358] pcmcia0: card irq 3 [ 7.1091644] pcmcia0: card irq 3 Sysinst could not automatically determine the BIOS geometry of the disk. The physical geometry is 3121 cylinders 16 sectors 63 heads You will be prompted for the geometry. Please enter the number of sectors per track (maximum 63) and number of heads (maximum 256) that the BIOS uses to access the disk. The number of cylinders will be calculated from the disk size. sectors [63]: heads [255]: We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's Master Boot Record (MBR) partition table, this is split further by the BSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. About 2.4G is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 3.0G if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire disk xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1536 Megabytes. A full installation requires at least 976 Megabytes without X and at least 1232 Megabytes if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installation xxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MB Cylinders Sectors Filesystem >a: 944 (1407) 1919 1934352 + / b: 128261 263088 swap c: 00 0 /tmp (mfs) d: 00 0 /usr e: 00 0 /var f: 00 0 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 463 MB, 12 free partitions. a: 944 (1407) 1919 1934352 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (mfs) c: 0 0 0 /tmp (mfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 463 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a: 0 1406 1407 FFSv1 Yes Yes / b: 1407 1535 128 swap c: 0 1535 1536 NetBSD partition d: 0 1535 1536 Whole disk e: 0 0 0 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... [ 8.4292938] pcmcia0: card irq 3 Status: Running Command: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- FinishedHit enter to continue Status: Running Command: /sbin/newfs -V2 -O 1 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 22272 inodes. ...............................................................................Finished Status: Running Command: /sbin/mount -tffs -o async /dev/wd0a /targetroot/ -------------------------------------------------------------------------------- FinishedHit enter to continue The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution set Selected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel (TX3912)No c: Kernel modulesYes d: BaseYes e: Configuration files (/etc) Yes f: Compiler toolsNo g: GamesNo h: Manual pagesNo i: MiscellaneousNo j: Test programsNo k: Text processing tools No l: X11 setsNone m: Source and debug sets None >x: Install selected sets>f: Compiler tools No x: Install selected setsYes f: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >j: Test programs NoYes j: Test programs Yes >l: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets l: X11 sets None >m: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets m: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVDxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fs xx g: Local directory xx h: Skip setxx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj[ 24.3967926] cd_setblksize: trying to change bsize, but no blk_desc Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /hpcmips/binary/sets c: Source set directory /source/sets d: Exit x: Continuelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkxxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjdevice [cd0a]: cd0d > >a: Device cd0d b: Binary set directory /hpcmips/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0d >x: Continue Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA20% |*******1088 KiB 1.61 MiB/s 00:02 ETA10****************************| 5260 KiB 2.170 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA26% |*********1792 KiB 1.33 MiB/s 00:03 ETA35***2368 KiB 1.2894******************** | 6336 KiB 1.550 ETA7* | 6528100**| 67203 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/base.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA768 KiB 1.32 MiB/s 01:47 ETA24160 KiB 1.6822 ETA3% |*5376 KiB 1.8015 ETA6% |**9280 KiB 1.9508 ETA812352 KiB 1.8910% |***529677 ETA2% |****785799 ETA42156868 ETA5% |*****27207534418% |******7328 KiB 1.6012 ETA984801 ETA21% |*******31104 KiB 1.5621283% |********46850 ETA6*8336607 ETA5928418565 ETA98430*467253 ETA80044 ETA3*870460 ETA8966*526720:58 ETA7368*580847 ETA64456 ETA40*920044 ETA2615043 ETA3*36162 ETA5700849 ETA200051 ETA6*9680 ETA7969649 ETA8702081484750*40487 ETA240153926 ETA2*7315 ETA764802593 ETA5*14722 ETA69208*5180 ETA96464560*838438 ETA832519216429184056 ETA3*24164414435 ETA56064 ETA1286*753623 ETA89451 ETA 98 M70*10029 ETA2*307 ETA41346 MiB 1.386 ETA6*84 ETA98*1272 ETA695331 ETA80*510 ETA16219 ETA2738 ETA814*2126 ETA6*34 ETA743 ETA5089* | 127 MiB 1.291 ETA90980 ETA13009 ETA2* | 13168 ETA23357 ETA345* | 13655 ETA7962 ETA9* | 1410 ETA254100*20 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/etc.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA86% |****************************** | 3648 KiB 2.21 MiB/s 00:00 ETA92** | 3904 KiB 1.784681100***| 4210 KiB 1.43 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/comp.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA704 KiB 2.13 MiB/s 02:42 ETA13840 KiB 1.24:39 ETA422461 ETA6016 KiB 1.075:18 ETA27232134 ETA424329 ETA8512 KiB 900.91 KiB/s 06:25 ETA10496 KiB 0.98 MiB/s 05:43 ETA3% |*81937 ETA1712 KiB 1.0422 ETA44656 KiB 1.124:57 ETA9732 ETA68321 ETA59136 KiB 1.2032 ETA20864227 ETA6% |**284840 ETA75152909 ETA707323 ETA8982443:56 ETA3084854 ETA9% |***3984847 ETA4368355 ETA56019 ETA106608 KiB 1.244:10 ETA8912604 ETA1401283 ETA2% |****288083:57 ETA38495 ETA550469 ETA76054:00 ETA3787241 ETA800033 ETA4503042 ETA8162864 KiB 1.198 ETA3185% |*****420889 ETA536078 ETA6843285 ETA90084 ETA762080 KiB 1.203:57 ETA3488 KiB 1.198 ETA8% |******7136 KiB 1.212 ETA20097014449 ETA7208 ETA84820% |*******21927 ETA4755 ETA169906 ETA75685 ETA2910412 ETA8012803 ETA3% |********364236 ETA458244 ETA755216 ETA5904321 ETA1776329 ETA6*484853 ETA6122 ETA7761 ETA8 97 MiB 1.2617 ETA10073 ETA9*280 ETA305 MiB 1.3005 ETA1910 ETA102*322:56 ETA3732 ETA421447 ETA5*6553 ETA790 ETA308*238 ETA37 ETA6965 ETA5740*963 ETA410 ETA15727 ETA265 ETA84 ETA3*5082 ETA20 ETA4419 ETA67 ETA5796 ETA6*604 ETA13 ETA741 ETA5860 ETA87809 ETA9*707 ETA127365046 ETA75 ETA183 ETA8052 ETA2*30 ETA3461:59 ETA758 ETA487 ETA9065 ETA5*24 ETA3 ETA651 ETA749 ETA798 ETA8*20375 ETA44 ETA3 ETA9682 ETA60*9939 ETA1126 ETA354 ETA2783 ETA992 ETA3*2081 ETA20 ETA4428 ETA567 ETA786 ETA6*95 ETA313 ETA741 ETA690 ETA9*4017 ETA703 MiB 1.404 ETA43 ETA171 ETA2*51108 ETA7 ETA355 ETA4 ETA46021 ETA5*40:58 ETA7835 ETA8*722 ETA96449 ETA80*8056 ETA143 ETA280 ETA3*492637 ETA565 ETA4 ETA6* | 30072 ETA1 ETA7429 ETA8668 ETA7 ETA85946 ETA9*1135 ETA22314 ETA90403 ETA5 MiB 1.3987662 ETA17543821901 ETA292 ETA1 ETA82072*65312102 MiB 1.19830 ETA71 ETA60 ETA3519 ETA8 ETA6477 ETA5895 ETA5* | 33144 ETA23 ETA32 ETA641 ETA5360 ETA09 ETA727818 ETA97 ETA0984076 ETA68* | 341545 ETA2324 ETA3100.993 ETA48952 ETA61 ETA7100*| 3470 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/misc.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA17% |*****2624 KiB 1.39 MiB/s 00:08 ETA20% |*******3072 KiB 1.44245697 ETA4*******6464 KiB 1.605 ETA8**74264 ETA62*****9536 KiB 1.483 ETA5*10048 KiB 1.3278*****1904 KiB 1.272 ETA2032884** | 12864 KiB 1.1291** | 138881 ETA100****| 1526000 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA21088 KiB 777.19 KiB/s 00:47 ETA6% |**2304 KiB 1.13 M31 ETA83136 KiB 990.90 K5 ETA14% |****5504 KiB 849.478 ETA632 KiB 863.317 ETA8% |******6912 KiB 737.8542 ETA487040 KiB 705.04 ETA24% |********9536 KiB 827.1034 ETA597 KiB 830.699**11392 KiB 825.922 ETA3.9832*2416 KiB 845.00 ETA8**4848 KiB 927.6225 ETA40*5360 KiB 916.1016064 KiB 849.66 ETA2256 KiB 848.08320 KiB 842.378**8496 KiB 884.512 ETA51*9840 KiB 924.6219 ETA63*****24256 KiB 0.98 M3 ETA32071**7456 KiB 1.020 ETA2*7718**9888 KiB 0.9808 ETA93040097 ETA82* | 314246 ETA5* | 3264085 ETA93*** | 35840 KiB 1.002 ETA7* | 37248 KiB 0.991 ETA9* | 38080 KiB 971.00 K0 ETA208 KiB 970.29100*| 38310 KiB 941.10 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: Running Command: /bin/sh MAKEDEV all --------------------------------------------------------------------------------Finished Status: Running Command: /etc/rc.d/random_seed stop --------------------------------------------------------------------------------Saved entropy to /var/db/entropy-file. Finished The extraction of the selected sets for NetBSD-8.99.26 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj The extraction of the selected sets for NetBSD-8.99.26 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqk x>Hit enter to continue x mqqqqqqqqqqqqqqqqqqqqqqqj Configure the additional items as needed. a: Configure networkconfigure b: TimezoneUTC c: Root shell/bin/sh d: Change root password***EMPTY*** e: Enable installation of binary packagesinstall f: Fetch and unpack pkgsrc for building from source install g: Enable sshdNO h: Enable ntpdNO i: Run ntpdate at bootNO j: Enable mdnsdNO k: Enable xdmNO l: Enable cgdYES m: Enable lvmNO n: Enable raidframeYES o: Add a user >x: Finished configuring The installation of NetBSD-8.99.26 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot. At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj NetBSD/hpcmips 8.99.26 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.26 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxraceback (most recent call last): File "/usr/pkg/bin/anita", line 151, in status = main() File "/usr/pkg/bin/anita", line 132, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1767, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1731, in _install child.expect("(Hit enter to continue)|(x: Exit Install System)|(#)|(halting machine)|(halted by root)") File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 173, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 119, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 82, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '48M', '-d', '/bracket/hpcmips/test/2018.11.27.10.38.14/anita/wd0.img', '-emobilepro880', '-d', '/bracket/hpcmips/test/2018.11.27.10.38.14/anita/install_tmp.iso', '/bracket/hpcmips/test/2018.11.27.10.38.14/anita/download/hpcmips/installation/netbsd.gz'] buffer (last 100 chars): 'nstall sets or install additional sets \x0ex\x0f\x1b[19;16H\x00\x00\x00\x0ex\x0f d: Reboot the computer\x1b[19;64H\x00\x00\x00\x0ex\x0f\x1b[20;16' before (last 100 chars): 'nstall sets or install additional sets \x0ex\x0f\x1b[19;16H\x00\x00\x00\x0ex\x0f d: Reboot the computer\x1b[19;64H\x00\x00\x00\x0ex\x0f\x1b[20;16' after: match: None match_index: None exitstatus: None flag_eof: False pid: 21365 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile('(Hit enter to continue)|(x: Exit Install System)|(#)|(halting machine)|(halted by root)') 1264.47 real 5.05 user 9.66 sys