This is anita version 1.47 Using pexpect version 4.6.0 /usr/pkg/bin/anita \ --workdir=/bracket/hpcmips/test/2019.06.01.07.15.39/anita \ --structured-log-file=/bracket/hpcmips/test/2019.06.01.07.15.39/install.slog \ --vmm-args= \ --test-timeout \ 120000 \ --memory-size \ 48M \ install \ file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/ Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/netbsd.gz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/modules.tgz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/base.tgz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/etc.tgz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/comp.tgz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/misc.tgz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/tests.tgz... OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.06.01.07.15.39/release/hpcmips/binary/sets/tests.tar.xz... missing but optional, so that's OK makefs \ -t \ cd9660 \ -o \ rockridge \ /bracket/hpcmips/test/2019.06.01.07.15.39/anita/install_tmp.iso \ /bracket/hpcmips/test/2019.06.01.07.15.39/anita/download Creating hard disk image... done. gxemul \ -M \ 48M \ -d \ /bracket/hpcmips/test/2019.06.01.07.15.39/anita/wd0.img \ -emobilepro880 \ -d \ /bracket/hpcmips/test/2019.06.01.07.15.39/anita/install_tmp.iso \ /bracket/hpcmips/test/2019.06.01.07.15.39/anita/download/hpcmips/installation/netbsd.gz child pid is 12363 GXemul 0.6.1 Copyright (C) 2003-2018 Anders Gavare Read the source code and/or documentation for other Copyright messages. Simple setup... net: simulated network: 10.0.0.0/8 (max outgoing: TCP=100, UDP=100) simulated gateway+nameserver: 10.0.0.254 (60:50:40:30:20:10) simulated nameserver uses real nameserver 140.160.30.203 machine: memory: 48 MB cpu0: VR4121 (I+D = 16+8 KB) machine: NEC MobilePro 880 bootstring: netbsd.gz diskimage: /bracket/hpcmips/test/2019.06.01.07.15.39/anita/wd0.img IDE DISK id 0, read/write, 1536 MB (3145728 sectors) diskimage: /bracket/hpcmips/test/2019.06.01.07.15.39/anita/install_tmp.iso IDE CD-ROM id 1, read-only, 188 MB (386836 sectors) gunziping /bracket/hpcmips/test/2019.06.01.07.15.39/anita/download/hpcmips/installation/netbsd.gz loading /tmp/gxemul.KB10w2eT4cq6 removing /tmp/gxemul.KB10w2eT4cq6 cpu0: starting at 0xffffffff80001000 ------------------------------------------------------------------------------- [ 1.0000000] mem_cluster_cnt = 3 [ 1.0000000] mem_clusters[0] = {0,0x8ba000} [ 1.0000000] mem_clusters[1] = {0x8ba000,0x1746000} [ 1.0000000] mem_clusters[2] = {0x2000000,0x1000000} [ 1.0000000] phys segment: 0x8ba000 @ 0 [ 1.0000000] skipping 0x8b9000 @ 0x1000 (kernel) [ 1.0000000] phys segment: 0x1746000 @ 0x8ba000 [ 1.0000000] adding 0x1746000 @ 0x8ba000 to freelist 0 [ 1.0000000] phys segment: 0x1000000 @ 0x2000000 [ 1.0000000] adding 0x1000000 @ 0x2000000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.42 (RAMDISK) #0: Sat Jun 1 10:09:14 UTC 2019 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2019.06.01.07.15.39-hpcmips/obj/sys/arch/hpcmips/compile/RAMDISK [ 1.0000000] NEC MobilePro 880 (NEC VR4121 rev2.12 98.304MHz) [ 1.0000000] total memory = 49152 KB [ 1.0000000] avail memory = 39128 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floating point [ 1.0000000] cpu0: 32 TLB entries, 256MB max page size [ 1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache [ 1.0000000] cpu0: 8KB/16B direct-mapped write-back L1 data cache [ 1.0000000] vr4102ip0 at mainbus0 [ 1.0000000] vrbcu0 at vr4102ip0 addr 0x0b000000-001f [ 1.0000000] vrbcu0: CPU 98.304MHz, bus 32.768MHz, ram 49.152MHz [ 1.0000000] vrcmu0 at vr4102ip0 addr 0x0b000060-007f [ 1.0000000] vrgiu0 at vr4102ip0 addr 0x0b000100-011f [ 1.0000000] hpcioman9 at vrgiu0 [ 1.0000000] hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low [ 1.0000000] button1 at vrgiu0 port=3 id=13 active=high sense=edge [ 1.0000000] pwctl0 at vrgiu0 port=46 id=0 on=1 [ 1.0000000] vrdmaau0 at vr4102ip0 addr 0x0b000020-0037 [ 1.0000000] vrdcu0 at vr4102ip0 addr 0x0b000040-004b [ 1.0000000] com0 at vr4102ip0 addr 0x0c000000-0007: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df [ 1.0000000] vrkiu0 at vr4102ip0 addr 0x0b000180-019f [ 1.0000000] hpckbd0 at vrkiu0 [ 1.0000000] wskbd0 at hpckbd0 mux 1 [ 1.0000000] vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf [ 1.0000000] vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7 [ 1.0000000] vrled0 at vr4102ip0 addr 0x0b000240-024f [ 1.0000000] vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf [ 1.0000000] wsmouse0 at vrpiu0 mux 0 vrpiu0: WARNING: powerhook_establish is deprecated [ 1.0000000] vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff [ 1.0000000] pci0 at vrc4172pci0 bus 0 [ 1.0000000] vrc4172pwm0 at vr4102ip0 addr 0x15003880-3885 [ 1.0000000] vraiu0 at vr4102ip0 addr 0x0b000160-017f [ 1.0000000] audio0 at vraiu0: half duplex, playback, capture, mmap [ 1.0000000] audio0: slinear_le:16 1ch 44100Hz, blk 23ms for playback [ 1.0000000] audio0: slinear_le:16 1ch 44100Hz, blk 23ms for recording [ 1.0000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.0000000] wsbell at spkr0 not configured [ 1.0000000] vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000 [ 1.0000000] isa0 at vrisab0 [ 1.0000000] pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827 [ 1.0000000] pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B [ 1.0000000] pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only [ 1.0000000] pcmcia0 at pcic0 controller 0 socket 0 [ 1.0000000] pcmcia1 at pcic0 controller 0 socket 1 [ 1.0000000] pcmcia at pcic0 controller 1 socket 0 not configured [ 1.0000000] bivideo0 at mainbus0: pseudo video controller [ 1.0000000] bivideo0: framebuffer address: 0x8a0ea600 [ 1.0000000] hpcfb0 at bivideo0 [ 1.0000000] wsdisplay0 at hpcfb0 kbdmux 1 [ 1.0000000] btnmgr0 at mainbus0 [ 1.0000000] wskbd1 at btnmgr0 mux 1 [ 1.0000000] hpcapm0 at mainbus0: pseudo power management module [ 1.0000000] apmdev0 at hpcapm0: Power Management spec V1.2 [ 1.0000030] pcic0: using irq 589827 for socket events pcic0: WARNING: powerhook_establish is deprecated pcic0: WARNING: powerhook_establish is deprecated [ 1.6181365] wdc1 at pcmcia0 function 0: < , NinjaATA-, V1.0, AP00 > [ 1.6181365] pcic0: port 0x180-0x187 [ 1.6181365] pcic0: port 0x386-0x387 [ 1.6181365] wdc1: i/o mapped mode [ 1.6181365] pcmcia0: card irq 3 [ 2.2786590] atabus0 at wdc1 channel 0 [ 2.2786590] atapibus0 at atabus0: 2 targets [ 2.2786590] cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 [ 2.2786590] wd0: [ 2.2786590] wd0: 1536 MB, 3121 cyl, 16 head, 63 sec, 512 bytes/sect x 3145968 sectors WARNING: 3 errors while detecting hardware; check system log. [ 2.6784698] boot device: wd0 [ 2.6784698] pcmcia0: card irq 3 [ 3.1189300] root on md0a dumps on md0b [ 3.1189300] root file system type: ffs [ 3.1189300] kern.module.path=/stand/hpcmips/8.99.42/modules erase ^?, werase ^W, kill ^U, intr ^C NetBSD/hpcmips 8.99.42 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.42 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install SystemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjYou have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes[ 3.8592254] pcmcia0: card irq 3 [ 4.5591461] pcmcia0: card irq 3 On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xxxx>a: wd0 (1.5G, wd0.img)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqj[ 5.2797882] pcmcia0: card irq 3 [ 5.9808990] pcmcia0: card irq 3 [ 6.7600433] pcmcia0: card irq 3 Sysinst could not automatically determine the BIOS geometry of the disk. The physical geometry is 3121 cylinders 16 sectors 63 heads You will be prompted for the geometry. Please enter the number of sectors per track (maximum 63) and number of heads (maximum 256) that the BIOS uses to access the disk. The number of cylinders will be calculated from the disk size. sectors [63]: heads [255]: We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's Master Boot Record (MBR) partition table, this is split further by the BSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. About 2.4G is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 3.0G if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire disk xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 976 Megabytes without X and at least 1232 Megabytes if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installation xxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjYou can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MB Cylinders Sectors Filesystem >a: 944 (1406) 1919 1934352 + / b: 128261 263088 swap c: 00 0 /tmp (mfs) d: 00 0 /usr e: 00 0 /var f: 00 0 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 462 MB, 12 free partitions. a: 944 (1406) 1919 1934352 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (mfs) c: 0 0 0 /tmp (mfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 462 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a: 1 1406 1406 FFSv1 Yes Yes / b: 1407 1535 128 swap c: 1 1535 1535 NetBSD partition d: 0 1535 1536 Whole disk e: 0 0 0 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... [ 8.7612945] pcmcia0: card irq 3 Status: Running Command: disklabel -w -r -f /tmp/disktab wd0 'wd0' qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq FinishedHit enter to continue Status: Running Command: /sbin/newfs -V2 -O 1 -b 16384 -f 2048 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq /dev/rwd0a: 1406.2MB (2879856 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.78MB, 11250 blks, 22144 inodes. ...............................................................................Finished Status: Running Command: /sbin/mount -tffs -o async /dev/wd0a /targetroot/ qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq FinishedHit enter to continue The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution set Selected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel (TX3912)No c: Kernel modulesYes d: BaseYes e: Configuration files (/etc) Yes f: Compiler toolsNo g: GamesNo h: Manual pagesNo i: MiscellaneousNo j: Test programsNo k: Text processing tools No l: X11 setsNone m: Source and debug sets None >x: Install selected sets>f: Compiler tools No x: Install selected setsYes f: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >j: Test programs NoYes j: Test programs Yes >l: X11 sets None lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets l: X11 sets None >m: Source and debug sets None lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets m: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVDxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fs xx g: Local directory xx h: Skip setxx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj[ 22.8057586] cd_setblksize: trying to change bsize, but no blk_desc Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory/hpcmips/binary/sets c: Source set directory/source/sets d: Exit x: Continue lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkxxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjdevice [cd0a]: cd0d > >a: Device cd0d b: Binary set directory/hpcmips/binary/sets c: Source set directory/source/sets d: Exit x: Continue a: Device cd0d >x: Continue Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 0 0.00 KiB/s --:-- ETA39% |*************2112 KiB 1.73 MiB/s 00:01 ETA60********3264 KiB 1.8210**************| 5360 KiB 2.000 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/modules.tgz tar --chroot -xhepf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 0 0.00 KiB/s --:-- ETA21% |*******1664 KiB 1.23 MiB/s 00:04 ETA30% |**********2368984******************* | 652630 ETA9** | 69122100****| 7710 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/base.tgz tar --chroot -xhepf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 0 0.00 KiB/s --:-- ETA1152 KiB 1.68 MiB/s 01:25 ETA3% |*4544 KiB 1.911 ETA[ warning: LOW reference: vaddr=0x0000000000000000, exception TLBL, pc=0xffffffff802b7510 <(no symbol)> ] [ warning: LOW reference: vaddr=0x0000000000000004, exception TLBL, pc=0xffffffff80026264 <(no symbol)> ] [ warning: LOW reference: vaddr=0x0000000000000004, exception TLBL, pc=0xffffffff80026264 <(no symbol)> ] [ warning: LOW reference: vaddr=0x0000000000000004, exception TLBL, pc=0xffffffff80026264 <(no symbol)> ] [ warning: LOW reference: vaddr=0x0000000000000004, exception TLBL, pc=0xffffffff80026264 <(no symbol)> ] [ warning: LOW reference: vaddr=0x0000000000000004, exception TLBL, pc=0xffffffff80026264 <(no symbol)> ] [ warning: LOW reference: vaddr=0x0000000000000004, exception TLBL, pc=0xffffffff80026264 <(no symbol)> ] Traceback (most recent call last): File "/usr/pkg/bin/anita", line 151, in status = main() File "/usr/pkg/bin/anita", line 132, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1798, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1526, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 179, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 119, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 82, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '48M', '-d', '/bracket/hpcmips/test/2019.06.01.07.15.39/anita/wd0.img', '-emobilepro880', '-d', '/bracket/hpcmips/test/2019.06.01.07.15.39/anita/install_tmp.iso', '/bracket/hpcmips/test/2019.06.01.07.15.39/anita/download/hpcmips/installation/netbsd.gz'] buffer (last 100 chars): 'ng: LOW reference: vaddr=0x0000000000000004, exception TLBL, pc=0xffffffff80026264 <(no symbol)> ]\r\n' before (last 100 chars): 'ng: LOW reference: vaddr=0x0000000000000004, exception TLBL, pc=0xffffffff80026264 <(no symbol)> ]\r\n' after: match: None match_index: None exitstatus: None flag_eof: False pid: 12363 child_fd: 12 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(Select medium|Install from)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 10832.33 real 0.78 user 7.20 sys