This is anita version 2.10 Using pexpect version 4.8.0 /usr/pkg/bin/anita \ --workdir=/bracket/hpcmips/test/2022.12.11.11.31.55/anita \ --structured-log-file=/bracket/hpcmips/test/2022.12.11.11.31.55/install.slog \ --vmm-args= \ --memory-size 48M \ install \ file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/ Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/netbsd.gz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/modules.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/base.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/etc.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/comp.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/gpufw.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/misc.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/rescue.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/tests.tgz... OK Downloading file:///bracket/hpcmips/release/2022.12.11.11.31.55/release/hpcmips/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ /bracket/hpcmips/test/2022.12.11.11.31.55/anita/install_tmp.iso \ /bracket/hpcmips/test/2022.12.11.11.31.55/anita/download Creating hard disk image... done. gxemul \ -M 48M \ -d /bracket/hpcmips/test/2022.12.11.11.31.55/anita/wd0.img \ -emobilepro880 \ -d /bracket/hpcmips/test/2022.12.11.11.31.55/anita/install_tmp.iso \ /bracket/hpcmips/test/2022.12.11.11.31.55/anita/download/hpcmips/installation/netbsd.gz child pid is 4470 GXemul 0.6.2 Copyright (C) 2003-2019 Anders Gavare Read the source code and/or documentation for other Copyright messages. Simple setup... net: simulated network: 10.0.0.0/8 (max outgoing: TCP=100, UDP=100) simulated gateway+nameserver: 10.0.0.254 (60:50:40:30:20:10) simulated nameserver uses real nameserver 140.160.30.203 machine: memory: 48 MB cpu0: VR4121 (I+D = 16+8 KB) machine: NEC MobilePro 880 bootstring: netbsd.gz diskimage: /bracket/hpcmips/test/2022.12.11.11.31.55/anita/wd0.img IDE DISK id 0, read/write, 1536 MB (3145728 sectors) diskimage: /bracket/hpcmips/test/2022.12.11.11.31.55/anita/install_tmp.iso IDE CD-ROM id 1, read-only, 214 MB (439232 sectors) gunziping /bracket/hpcmips/test/2022.12.11.11.31.55/anita/download/hpcmips/installation/netbsd.gz loading /tmp/gxemul.qnd4uDI57q4z removing /tmp/gxemul.qnd4uDI57q4z cpu0: starting at 0xffffffff80001000 ------------------------------------------------------------------------------- [ 1.0000000] mem_cluster_cnt = 3 [ 1.0000000] mem_clusters[0] = {0,0x9da000} [ 1.0000000] mem_clusters[1] = {0x9da000,0x1626000} [ 1.0000000] mem_clusters[2] = {0x2000000,0x1000000} [ 1.0000000] phys segment: 0x9da000 @ 0 [ 1.0000000] skipping 0x9d9000 @ 0x1000 (kernel) [ 1.0000000] phys segment: 0x1626000 @ 0x9da000 [ 1.0000000] adding 0x1626000 @ 0x9da000 to freelist 0 [ 1.0000000] phys segment: 0x1000000 @ 0x2000000 [ 1.0000000] adding 0x1000000 @ 0x2000000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021, 2022 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.108 (RAMDISK) #0: Sun Dec 11 19:51:39 UTC 2022 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2022.12.11.11.31.55-hpcmips/obj/sys/arch/hpcmips/compile/RAMDISK [ 1.0000000] NEC MobilePro 880 (NEC VR4121 rev2.12 98.304MHz) [ 1.0000000] total memory = 49152 KB [ 1.0000000] avail memory = 37904 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floating point [ 1.0000000] cpu0: 32 TLB entries, 256MB max page size [ 1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache [ 1.0000000] cpu0: 8KB/16B direct-mapped write-back L1 data cache [ 1.0000000] vr4102ip0 at mainbus0 [ 1.0000000] vrbcu0 at vr4102ip0 addr 0x0b000000-001f [ 1.0000000] vrbcu0: CPU 98.304MHz, bus 32.768MHz, ram 49.152MHz [ 1.0000000] vrcmu0 at vr4102ip0 addr 0x0b000060-007f [ 1.0000000] vrgiu0 at vr4102ip0 addr 0x0b000100-011f [ 1.0000000] hpcioman9 at vrgiu0 [ 1.0000000] hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low [ 1.0000000] button1 at vrgiu0 port=3 id=13 active=high sense=edge [ 1.0000000] pwctl0 at vrgiu0 port=46 id=0 on=1 [ 1.0000000] vrdmaau0 at vr4102ip0 addr 0x0b000020-0037 [ 1.0000000] vrdcu0 at vr4102ip0 addr 0x0b000040-004b [ 1.0000000] com0 at vr4102ip0 addr 0x0c000000-0007: ns16550a, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df [ 1.0000000] vrkiu0 at vr4102ip0 addr 0x0b000180-019f [ 1.0000000] hpckbd0 at vrkiu0 [ 1.0000000] wskbd0 at hpckbd0 mux 1 [ 1.0000000] vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf [ 1.0000000] vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7 [ 1.0000000] vrled0 at vr4102ip0 addr 0x0b000240-024f [ 1.0000000] vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf [ 1.0000000] wsmouse0 at vrpiu0 mux 0 vrpiu0: WARNING: powerhook_establish is deprecated [ 1.0000000] vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff [ 1.0000000] pci0 at vrc4172pci0 bus 0 [ 1.0000000] vrc4172pwm0 at vr4102ip0 addr 0x15003880-3885 [ 1.0000000] vraiu0 at vr4102ip0 addr 0x0b000160-017f [ 1.0000000] audio0 at vraiu0: playback [ 1.0000000] audio0: slinear_le:16 1ch 44100Hz, blk 2048 bytes (23.2ms) for playback [ 1.0000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.0000000] wsbell at spkr0 not configured [ 1.0000000] vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000 [ 1.0000000] isa0 at vrisab0 [ 1.0000000] pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827 [ 1.0000000] pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B [ 1.0000000] pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only [ 1.0000000] pcmcia0 at pcic0 controller 0 socket 0 [ 1.0000000] pcmcia1 at pcic0 controller 0 socket 1 [ 1.0000000] pcmcia at pcic0 controller 1 socket 0 not configured [ 1.0000000] bivideo0 at mainbus0: pseudo video controller [ 1.0000000] bivideo0: framebuffer address: 0x8a0ea600 [ 1.0000000] hpcfb0 at bivideo0 [ 1.0000000] wsdisplay0 at hpcfb0 kbdmux 1 [ 1.0000000] btnmgr0 at mainbus0 [ 1.0000000] wskbd1 at btnmgr0 mux 1 [ 1.0000000] hpcapm0 at mainbus0: pseudo power management module [ 1.0000000] apmdev0 at hpcapm0: Power Management spec V1.2 [ 1.0000030] pcic0: using irq 589827 for socket events pcic0: WARNING: powerhook_establish is deprecated pcic0: WARNING: powerhook_establish is deprecated [ 1.0090667] WARNING: system needs entropy for security; see entropy(7) [ 1.6091339] wdc1 at pcmcia0 function 0: < , NinjaATA-, V1.0, AP00 > [ 1.6091339] pcic0: port 0x180-0x187 [ 1.6091339] pcic0: port 0x386-0x387 [ 1.6091339] wdc1: i/o mapped mode [ 1.6091339] pcmcia0: card irq 3 [ 2.2697479] atabus0 at wdc1 channel 0 [ 2.2697479] atapibus0 at atabus0: 2 targets [ 2.2697479] cd0 at atapibus0 drive 1: cdrom removable [ 2.2697479] wd0 at atabus0 drive 0 [ 2.2697479] wd0: [ 2.2893402] wd0: 1536 MB, 3121 cyl, 16 head, 63 sec, 512 bytes/sect x 3145968 sectors [ 2.6925994] swwdog0: software watchdog initialized [ 2.6939727] WARNING: 3 errors while detecting hardware; check system log. [ 2.6948883] boot device: wd0 [ 2.6958038] pcmcia0: card irq 3 [ 2.8095428] wd0: no disk label [ 3.2096893] root on md0a dumps on md0b [ 3.2096893] root file system type: ffs [ 3.2096893] kern.module.path=/stand/hpcmips/9.99.108/modules erase ^?, werase ^W, kill ^U, intr ^C NetBSD/hpcmips 9.99.108 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-9.99.108 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx Yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes[ 4.2109405] pcmcia0: card irq 3 [ 4.5101959] wd0: no disk label On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xxxx>a: wd0 (1.5G, wd0.img)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqj[ 5.0109283] pcmcia0: card irq 3 [ 5.3106414] wd0: no disk label [ 5.7111541] pcmcia0: card irq 3 [ 6.0108367] wd0: no disk label [ 7.0715972] pcmcia0: card irq 3 [ 7.3715240] wd0: no disk label Sysinst could not automatically determine the BIOS geometry of the disk. The physical geometry is 3121 cylinders 63 sectors 16 heads You will be prompted for the geometry. Please enter the number of sectors per track (maximum 63) and number of heads (maximum 256) that the BIOS uses to access the disk. The number of cylinders will be calculated from the disk size. sectors [63]: heads [255]: We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's Master Boot Record (MBR) partition table, this is split further by the BSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. About 1.2G is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 3.0G if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x What would you like to do?x xx x>a: Edit the MBR partition tablex x b: Use the entire diskx x c: Delete everything, use different partitions (not MBR) x x x: Cancelx mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk[ 8.2118865] pcmcia0: card irq 3 [ 8.5117828] wd0: no disk label You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 1536M. A full installation requires at least 976M without X and at least 1232M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do? xxxx>a: Set sizes of NetBSD partitionsxx b: Use default partition sizes xx x: Cancelxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Size (sec)Filesystem ----------------------------------- - -------------------- >a: 819200 (2883761) + / b: 262144 c: 0/tmp (mfs) d: 0/usr e: 0/var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 2064561 sec. a: 819200 (2883761) + / >b: 262144 b: 262144 >c: 0 /tmp (mfs) c: 0 /tmp (mfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 2064561 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (N)ewfs. Total size: 1536M, free: 0B Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a:63 2883823 2883761 FFS N / b: 2883824 3145967 262144 swap c: 63 3145967 3145905 NetBSD partition d:0 3145967 3145968 Whole disk ------------ ------------ ------------ -------- ---- ---------------- f: Change input units (sectors/cylinders/MB/GB) g: Edit name of the disk h: Clone external partition(s) i: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Writing the MBR partition table to wd0... [ 10.1729156] pcmcia0: card irq 3 [ 10.4725982] wd0: no disk label Status: Running Command: disklabel -w -r -f /tmp/disklabel.108 wd0 'wd' 'fictious' qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq FinishedHit enter to continue Status: Running Command: /sbin/newfs -V2 -O 1 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq newfs: /dev/rwd0a: open for read: Device not configured Command failedHit enter to continue NetBSD/hpcmips 9.99.108 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-9.99.108 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install SystemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 157, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2354, in install self._install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 1473, in _install self._install_using_sysinst() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2034, in _install_using_sysinst 10800) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 242, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 344, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 372, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '48M', '-d', '/bracket/hpcmips/test/2022.12.11.11.31.55/anita/wd0.img', '-emobilepro880', '-d', '/bracket/hpcmips/test/2022.12.11.11.31.55/anita/install_tmp.iso', '/bracket/hpcmips/test/2022.12.11.11.31.55/anita/download/hpcmips/installation/netbsd.gz'] buffer (last 100 chars): b'nstall System\x1b[22;64H\x00\x00\x00\x0ex\x0f\x1b[23;16H\x00\x00\x00\x0emqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj\x0f\x1b[16;17H\x00\x00\x00' before (last 100 chars): b'nstall System\x1b[22;64H\x00\x00\x00\x0ex\x0f\x1b[23;16H\x00\x00\x00\x0emqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj\x0f\x1b[16;17H\x00\x00\x00' after: match: None match_index: None exitstatus: None flag_eof: False pid: 4470 child_fd: 9 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b'(?!)') 1: re.compile(b'a: Progress bar') 2: re.compile(b'Select medium|Install from') 3: re.compile(b'Enter the CDROM device') 4: re.compile(b'unused-group-should-not-match') 5: re.compile(b'Hit enter to continue') 6: re.compile(b'b: Use serial port com0') 7: re.compile(b'Please choose the timezone') 8: re.compile(b'essential things') 9: re.compile(b'Configure the additional items') 10: re.compile(b'Multiple CDs found') 11: re.compile(b'The following are the http site') 12: re.compile(b'Is the network information you entered accurate') 13: re.compile(b'I have found the following network interface') 14: re.compile(b'Which network device would you like to use') 15: re.compile(b'No allows you to continue anyway') 16: re.compile(b"Can't connect to") 17: re.compile(b'/sbin/newfs') 18: re.compile(b'Do you want to install the NetBSD bootcode') 19: re.compile(b'Do you want to update the bootcode in the Master Boot Record to the latest') 20: re.compile(b'([a-z]): Custom installation') 21: re.compile(b'(?!)') 22: re.compile(b'a: This is the correct geometry') 23: re.compile(b'a: Use one of these disks') 24: re.compile(b'([a-z]): Set sizes of NetBSD partitions') 25: re.compile(b'(?!)') 26: re.compile(b'a partitioning scheme') 27: re.compile(b'([a-z]): Use the entire disk') 28: re.compile(b'(?!)') 29: re.compile(b'Do you want to install the NetBSD bootcode') 30: re.compile(b'Do you want to update the bootcode') 31: re.compile(b'Please enter a name for your NetBSD disk') 32: re.compile(b'ready to install NetBSD on your hard disk') 33: re.compile(b'We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions') 34: re.compile(b'Your disk currently has a non-NetBSD partition') 35: re.compile(b'Sysinst could not automatically determine the BIOS geometry of the disk') 36: re.compile(b'Do you want to re-edit the disklabel partitions') 37: re.compile(b'Command: ') 38: re.compile(b'not enough entropy') 39: re.compile(b'Changing local password for root') 10853.77 real 70.19 user 43.45 sys