This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.10.21.15.20.52/anita \ --structured-log-file=/bracket/i386/test/2017.10.21.15.20.52/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.10.21.15.20.52/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.10.21.15.20.52/anita/install_tmp.iso /bracket/i386/test/2017.10.21.15.20.52/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.10.21.15.20.52/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.10.21.15.20.52/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.10.21.15.20.52/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 25629 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15760448\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block182): /bracket/i386/test/2017.10.21.15.20.52/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block319): /bracket/i386/test/2017.10.21.15.20.52/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block536): /bracket/i386/test/2017.10.21.15.20.52/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.10change floppy0 /bracket/i386/test/2017.10.change floppy0 /bracket/i386/test/2017.10.2change floppy0 /bracket/i386/test/2017.10.21chan /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+5764500/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2017.10.21.change floppy0 /bracket/i386/test/2017.10.21.1change floppy0 /bracket/i386/test/2017.10.21.15change floppy0 /bracket/i386/test/2017.10.21.15.change floppy0 /bracket/i386/test/2017.10.21.15.2change floppy0 /bracket/i386/test/2017.10.21.15.20 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846860=0x15561d4 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.4 (INSTALL) #0: Sat Oct 21 19:05:16 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.10.21.15.20.52-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)00000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20170831 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.4/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" poker test failure: parameter X = 47.91680 Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2715 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 2.11200 cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 1.95200 cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.4 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.4 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [QEMU HARDDISK ]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'QEMU HARDDISK ' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA62% |*********************12480 KiB 7.90 M00:00 ETA91**********82423100****| 198507 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA10% |***4352 KiB 2.37 M00:15 ETA192816 ETA9% |******832055 ETA21*9024048**119054 ETA31*312033 ETA7**55521.972 ETA40**67689***208002.1109 ETA54*265648 ETA63****6368216 ETA6*77761974**30848214 ETA80***34073 ETA7**622402 ETA4169*** | 4070430 ETA9* | 4153615100*| 41620071.98 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA4% |*6976 KiB 4.01 M00:35 ETAc5% |*| 9152 KiB 4.14 MiB/s 00:34 ETA2.321:00 ETAc5% |*| 9152 KiB 2.14 MiB/s 01:05 ETA1.4735 ETA38 ETA11% |***169602.1601 ETAc13% |****| 20416 KiB 2.33 MiB/s 00:55 ETA47041:03 ETAc13% |****| 20447 KiB 1.89 MiB/s 01:08 ETA800616 ETA58 ETAc15% |*****| 24000 KiB 1.62 MiB/s 01:17 ETA5720 ETAc16% |*****| 25664 KiB 1.49 MiB/s 01:23 ETA65 ETAc16% |*****| 25664 KiB 1.33 MiB/s 01:33 ETA15 ETA8*85450 ETA99568629 ETAc19% |******| 30528 KiB 1.31 MiB/s 01:31 ETA92293 ETAc19% |******| 30656 KiB 1.21 MiB/s 01:39 ETA20*971940 ETAc 21% |*******| 33472 KiB 1.22 MiB/s 01:35 ETA198 ETAc 21% |*******| 33472 KiB 1.14 MiB/s 01:42 ETA15 ETAc 22% |*******| 35008 KiB 1.11 MiB/s 01:43 ETA096 ETA4*821537 ETA7*424962427 ETAc 28% |*********| 43776 KiB 1.23 MiB/s 01:26 ETA80718 ETAc 28% |*********| 43807 KiB 1.16 MiB/s 01:31 ETA460830*72962026 ETAc 32% |***********| 49280 KiB 1.22 MiB/s 01:23 ETA185 ETAc 32% |***********| 49280 KiB 1.16 MiB/s 01:27 ETA330 ETA351328526 ETA5*4784200 ETAc 37% |************| 57408 KiB 1.23 MiB/s 01:16 ETA08 ETAc 38% |*************| 59008 KiB 1.21 MiB/s 01:16 ETA188 ETAc 38% |*************| 59008 KiB 1.16 MiB/s 01:19 ETA421 ETA960672518 ETAc 41% |**************| 63616 KiB 1.18 MiB/s 01:14 ETA65 ETAc 41% |**************| 63616 KiB 1.13 MiB/s 01:17 ETA28 ETAc 42% |**************| 64704 KiB 1.11 MiB/s 01:17 ETA2009 ETAc 42% |**************| 64720 KiB 1.08 MiB/s 01:20 ETA579219 ETAc 43% |***************| 67456 KiB 1.08 MiB/s 01:17 ETA78 ETAc 43% |***************| 67456 KiB 1.05 MiB/s 01:20 ETA41 ETA481603c 46% |****************| 71744 KiB 1.07 MiB/s 01:14 ETA56 ETAc 46% |****************| 71744 KiB 1.04 MiB/s 01:17 ETA28 ETAc 48% |****************| 73920 KiB 1.04 MiB/s 01:14 ETA49443c 48% |**************** | 74944 KiB 1.02 MiB/s 01:15 ETA 06 ETA5200c 51% |*****************| 79104 KiB 1.03 MiB/s 01:10 ETA23221 ETA2*801280 ETA4364504 ETAc 56% |*******************| 87424 KiB 1.08 MiB/s 00:59 ETA71:00 ETAc 56% |*******************| 87424 KiB 1.06 MiB/s 01:01 ETA5c 58% |********************| 89344 KiB 1.05 MiB/s 00:59 ETA41:00 ETAc 59% |********************| 91072 KiB 1.04 MiB/s 00:58 ETAc 59% |********************| 91072 KiB 1.02 MiB/s 00:59 ETA11:00 ETAc 60% |*********************| 93568 KiB 1.03 MiB/s 00:57 ETA145926 ETAc 61% |********************* | 94592 KiB 1.01 MiB/s 00:56 ETA 7 ETA0.993*84961.032 ETAc 64% |**********************| 99776 KiB 1.02 MiB/s 00:51 ETA 64% |********************** | 99776 KiB 1.02 MiB/s 00:51 ETAc02 ETA968c 66% |***********************| 99 MiB 1.00 MiB/s 00:50 ETA0.991 ETAc 66% |***********************| 99 MiB 0.98 MiB/s 00:51 ETA72 ETAc 66% |***********************| 99 MiB 991.60 KiB/s 00:52 ETA83.353 ETAc 66% |***********************| 99 MiB 972.52 KiB/s - stalled -64.58c cd0a: error reading fsbn 204360 of 204360-204487 (cd0 bn 204360; cn 2043 tn 0 sn 66% |***********************| 99 MiB 954.25 KiB/s - stalled -46.87c 66% |***********************| 99 MiB 936.48 KiB/s - stalled -c 66% |*********************** | 99 MiB 929.47 KiB/s - stalled - 19.75.41 00:56 ETAc 67% |***********************| 101 MiB 919.50 KiB/s 00:54 ETA2.445 ETA70*6 MiB 949.7947 ETAc 73% |*************************| 110 MiB 977.07 KiB/s 00:42 ETA69.43c 73% |*************************| 110 MiB 960.92 KiB/s 00:42 ETA52.643 ETAc 74% |*************************| 111 MiB 958.99 KiB/s 00:41 ETA0.545*38.9239 ETA8*8 MiB 990.133 ETAc 80% |**************************** | 121 MiB 0.98 MiB/s 00:29 ETA997.69 K128.448 ETAc 83% |***************************** | 125 MiB 0.99 MiB/s 00:24 ETA8c 83% |***************************** | 125 MiB 0.97 MiB/s 00:25 ETA996.01 K463.084 ETAc 86% |****************************** | 130 MiB 0.99 MiB/s 00:20 ETA7218 ETAc 87% |****************************** | 132 MiB 0.98 MiB/s 00:18 ETA87 ETA3 MiB 999.18 K9*4706 ETA5825 ETA906 MiB 0.97 M4 ETAc 91% |******************************* | 138 MiB 0.98 MiB/s 00:12 ETA2*90 ETA341909 ETA48999.83 K7.5787.725*3 MiB 0.97 M6 ETA9* | 1491.000 ETA500.99100*Finished cd0(piixide0:0:1): adapter resource shortage cd0(piixide0:0:1): adapter resource shortage Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 2.87 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 768 KiB 379.99 KiB/s 13:10 ETA55.654:04 ETA3% |*940 2.58 M01:50 ETAc4% |*| 14592 KiB 3.24 MiB/s 01:26 ETA6562.4752 ETA55104312:00 ETA7% |**21696841:35 ETAc8% |**| 24576 KiB 2.79 MiB/s 01:36 ETA5047 ETA6688489% |***80963453 ETAc9% |***| 28544 KiB 2.22 MiB/s 01:59 ETAc10% |***| 30400 KiB 2.10 MiB/s 02:05 ETA058 ETA1.8720 ETAc10% |***| 30400 KiB 1.82 MiB/s 02:25 ETA6638 ETA84849 ETAc11% |***| 35840 KiB 1.76 MiB/s 02:26 ETA609648 ETA2% |****77606733 ETA952c13% |****| 41920 KiB 1.70 MiB/s 02:28 ETA699 ETAc13% |****| 41920 KiB 1.58 MiB/s 02:39 ETA542 ETA4448639 ETA5% |*****563278 ETA78087 ETA684458 ETAc 16% |*****| 50688 KiB 1.56 MiB/s 02:36 ETA7152047 ETAc 17% |*****| 51520 KiB 1.49 MiB/s 02:43 ETA56 ETA648152 ETAc 18% |******| 54272 KiB 1.45 MiB/s 02:44 ETA510428 ETA8727 ETA9894451 ETA21*64512528 ETA3*709766714 ETA57697901 ETA7*8416081:51 ETAc 30% |**********| 91072 KiB 2.00 MiB/s 01:42 ETA2351.973 ETAc 30% |**********| 92928 KiB 1.95 MiB/s 01:43 ETA1414424 ETA27206 ETAc 31% |**********| 96064 KiB 1.89 MiB/s 01:45 ETA57 ETA3* 97 M93 ETAc 33% |***********| 99 MiB 1.89 MiB/s 01:42 ETA55 ETA410163 ETAc 34% |***********| 102 MiB 1.83 MiB/s 01:43 ETA24 ETAc 36% |************| 106 MiB 1.84 MiB/s 01:42 ETA03 ETA712 ETA711438 ETAc 39% |*************| 116 MiB 1.88 MiB/s 01:34 ETA40*73 ETA55 ETA93 ETA2259028 ETA3*835 ETA53371 ETAc 46% |****************| 136 MiB 1.98 MiB/s 01:19 ETA520 ETA7479518 ETA84376 ETA9*55 ETA5073 ETA15091 ETA2*52.0208 ETA4955 ETAc 55% |*******************| 162 MiB 2.06 MiB/s 01:03 ETA34 ETAc 55% |*******************| 163 MiB 2.03 MiB/s 01:03 ETA04 ETA658*7150:59 ETA9467 ETA61*994 ETA283112 ETA3*7449 ETA59276 ETA7*8213 ETAc 68% |***********************| 200 MiB 2.21 MiB/s 00:42 ETA19c 69% |************************| 205 MiB 2.22 MiB/s 00:40 ETA197068c 72% |*************************| 214 MiB 2.24 MiB/s 00:35 ETA3251c 75% |**************************| 220 MiB 2.24 MiB/s 00:32 ETA12c 77% |**************************| 228 MiB 2.24 MiB/s 00:29 ETA28*3137 ETAc 80% |**************************** | 235 MiB 2.25 MiB/s 00:25 ETA36 ETA1954 ETA4*47300 ETA6*54416 ETA8854 ETA9460311299*8263 ETA5332019479065436100875742101.99872 ETA65492108977052*43201786543221069331 ETA48c 93% |******************************** | 275 MiB 1.68 MiB/s 00:11 ETA760 ETA4657609 ETA5*958 ETAc 95% |********************************* | 280 MiB 1.65 MiB/s 00:08 ETA147 ETA6236 ETA3140595 ETA75765644 ETAc 97% |********************************* | 286 MiB 1.54 MiB/s 00:04 ETAc 97% |********************************* | 286 MiB 1.53 MiB/s 00:04 ETAc 97% |********************************* | 286 MiB 1.51 MiB/s 00:04 ETAc 97% |********************************* | 287 MiB 1.50 MiB/s 00:04 ETAc cd0a: error reading fsbn 411256 of 411256-411383 (cd0 bn 411256; cn 4112 tn 0 sn 97% |********************************* | 287 MiB 1.49 MiB/s 00:04 ETA8c 97% |********************************* | 288 MiB 1.47 MiB/s 00:04 ETA8*3 ETAc 98% |********************************** | 288 MiB 1.46 MiB/s 00:03 ETA5493c 98% |********************************** | 289 MiB 1.42 MiB/s 00:03 ETAc 98% |********************************** | 289 MiB 1.41 MiB/s 00:03 ETA0c 98% |********************************** | 289 MiB 1.39 MiB/s 00:03 ETAc 98% |********************************** | 289 MiB 1.38 MiB/s 00:03 ETAc cd0a: error reading fsbn 411272 of 411272-411287 (cd0 bn 411272; cn 4112 tn 0 sn gzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Unexpected EOF on archive file 98% |********************************** | 289 MiB 1.37 MiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.10.21.15.20.52/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.10.21.15.20.52/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.10.21.15.20.52/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 25629 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11382.21 real 28.26 user 13.26 sys