This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.10.22.07.52.40/anita \ --structured-log-file=/bracket/i386/test/2017.10.22.07.52.40/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.10.22.07.52.40/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.10.22.07.52.40/anita/install_tmp.iso /bracket/i386/test/2017.10.22.07.52.40/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.10.22.07.52.40/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.10.22.07.52.40/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.10.22.07.52.40/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 429 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15760512\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block136): /bracket/i386/test/2017.10.22.07.52.40/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block301): /bracket/i386/test/2017.10.22.07.52.40/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block597): /bracket/i386/test/2017.10.22.07.52.40/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.10change floppy0 /bracket/i386/test/2017.10.change floppy0 /bracket/i386/test/2017.10.2change floppy0 /bracket/i386/test/2017.10.22chan |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...ge floppy0 /bracket/i386/test/2017.10.22.change floppy0 /bracket/i386/test/2017.10.22.0change floppy0 /bracket/i386/test/2017.10.22.07change floppy0 /bracket/i386/test/2017.10.22.07.change floppy0 /bracket/i386/test/2017.10.22.07.5change floppy0 /bracket/i386/test/2017.10.22.07.52 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+5764500/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2017.10.22.07.52.change floppy0 /bracket/i386/test/2017.10.22.07.52.4change floppy0 /bracket/i386/test/2017.10.22.07.52.40change floppy0 /bracket/i386/test/2017.10.22.07.52.40/change floppy0 /bracket/i386/test/2017.10. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846860=0x15561d4 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.4 (INSTALL) #0: Sun Oct 22 10:02:09 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.10.22.07.52.40-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20170831 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.4/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2685 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 4 0s (386 >= 384) cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 1.60640 cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 26 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2707 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 9713 ones cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.4 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.4 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [QEMU HARDDISK ]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'QEMU HARDDISK ' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA58% |********************11584 KiB 7.53 M00:01 ETA97************* | 194568.220 ETA100**| 198600 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA16% |*****6976 KiB 4.18 M00:08 ETA22**95367 ETA34****142723.896 ETA4****8434.125 ETA5***225283.984 ETA62***617693 ETA9***88007577**3212832 ETA85***564681 ETA92*** | 3859210 ETA100***| 416205341 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 448 KiB 199.85 KiB/s 12:47 ETA11920 KiB 705.8203:35 ETA5% |*864 2.17 M1:05 ETA9% |***148483.010:45 ETAc14% |****| 21696 KiB 3.60 MiB/s 00:35 ETA24000941 ETA5% |*****31682.864 ETAc17% |*****| 27520 KiB 3.00 MiB/s 00:41 ETA2.666 ETA8*841657 ETA20*309121c22% |*******| 34624 KiB 2.64 MiB/s 00:44 ETA5008408 ETA3*63527 ETAc25% |********| 38656 KiB 2.33 MiB/s 00:48 ETA2450 ETAc26% |*********| 40192 KiB 2.16 MiB/s 00:51 ETA073 ETAc27% |*********| 42304 KiB 2.05 MiB/s 00:52 ETA1.965 ETAc29% |**********| 45568 KiB 2.03 MiB/s 00:52 ETA1.925 ETAc30% |**********| 46720 KiB 1.91 MiB/s 00:54 ETA87 ETA7168788 ETA4*52992921 ETAc 35% |************| 55296 KiB 1.92 MiB/s 00:49 ETA8551 ETAc 36% |************| 56768 KiB 1.84 MiB/s 00:51 ETA783 ETAc 37% |************| 58368 KiB 1.78 MiB/s 00:52 ETA24 ETAc 37% |************| 58368 KiB 1.67 MiB/s 00:55 ETA27 ETA9*6003235 ETAc 39% |*************| 61376 KiB 1.60 MiB/s 00:56 ETA58c 40% |**************| 63040 KiB 1.57 MiB/s 00:56 ETA47 ETAc 42% |**************| 65088 KiB 1.54 MiB/s 00:56 ETA17 ETAc 42% |**************| 65088 KiB 1.47 MiB/s 00:58 ETA41:00 ETAc 44% |***************| 68096 KiB 1.47 MiB/s 00:56 ETA48 ETAc 44% |***************| 68096 KiB 1.41 MiB/s 00:59 ETA381:00 ETAc 44% |***************| 68096 KiB 1.35 MiB/s 01:01 ETA2- stalled -c 46% |****************| 70912 KiB 1.35 MiB/s 00:59 ETA142431:00 ETAc 46% |****************| 71424 KiB 1.31 MiB/s 01:01 ETA282 ETAc 46% |****************| 71424 KiB 1.26 MiB/s 01:03 ETA44 ETA61625 ETAc 47% |****************| 73024 KiB 1.22 MiB/s 01:04 ETA05 ETAc 47% |****************| 73024 KiB 1.18 MiB/s 01:06 ETA67 ETAc 50% |*****************| 77440 KiB 1.22 MiB/s 01:01 ETA192 ETAc 50% |*****************| 77440 KiB 1.18 MiB/s 01:03 ETA64 ETAc 50% |*****************| 77440 KiB 1.14 MiB/s 01:05 ETA2- stalled -196164 01:03 ETAc 54% |******************| 83136 KiB 1.17 MiB/s 00:58 ETA776c 54% |******************| 83776 KiB 1.15 MiB/s 00:59 ETA31:00 ETA43528**94780:53 ETAc 59% |********************| 91776 KiB 1.19 MiB/s 00:50 ETA21608c 59% |********************| 92160 KiB 1.16 MiB/s 00:51 ETA52 ETAc 60% |*********************| 93184 KiB 1.15 MiB/s 00:51 ETA6324140803c 61% |*********************| 95168 KiB 1.13 MiB/s 00:50 ETA21 ETAc 61% |*********************| 95168 KiB 1.10 MiB/s 00:51 ETA360092 ETAc 62% |*********************| 96768 KiB 1.09 MiB/s 00:50 ETA81 ETAc 62% |*********************| 96768 KiB 1.07 MiB/s 00:51 ETAc 63% |**********************| 98304 KiB 1.07 MiB/s 00:50 ETA6c 64% |**********************| 99264 KiB 1.06 MiB/s 00:50 ETA776549 ETAc 65% |**********************| 98 MiB 1.05 MiB/s 00:48 ETA949 ETAc 68% |***********************| 102 MiB 1.07 MiB/s 00:44 ETA363 ETAc 68% |***********************| 103 MiB 1.05 MiB/s 00:43 ETA44 ETA9*4c 72% |*************************| 109 MiB 1.08 MiB/s 00:37 ETA37c 73% |*************************| 109 MiB 1.06 MiB/s 00:37 ETA58 ETAc 73% |*************************| 109 MiB 1.04 MiB/s 00:38 ETA3117 ETAc 75% |**************************| 113 MiB 1.05 MiB/s 00:34 ETA644c 76% |**************************| 114 MiB 1.04 MiB/s 00:34 ETA2c 76% |**************************| 114 MiB 1.02 MiB/s 00:35 ETA0c 76% |**************************| 114 MiB 1.00 MiB/s 00:35 ETA0.99- stalled - 00:35 ETAc 77% |**************************| 116 MiB 0.98 MiB/s 00:34 ETAc 77% |**************************| 116 MiB 996.46 KiB/s 00:35 ETA2.6281**22 MiB 1.00 M27 ETA2316 ETAc 85% |***************************** | 128 MiB 1.04 MiB/s 00:20 ETA6*30518 ETAc 86% |****************************** | 130 MiB 1.04 MiB/s 00:18 ETA38246 ETA39*45 ETA9053 ETAc 91% |******************************* | 137 MiB 1.04 MiB/s 00:12 ETA2*950 ETAc 92% |******************************** | 139 MiB 1.04 MiB/s 00:10 ETA34009 ETA418 ETA8** | 14882 ETA990 ETA750100*65 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 2.40 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 4288 KiB 2.18 MiB/s 02:12 ETA1.9925 ETAc1% || 4288 KiB 1.08 MiB/s 04:27 ETA047 ETA3% |*10432872:31 ETAc4% |*| 14400 KiB 2.17 MiB/s 02:08 ETA1.8630 ETAc4% |*| 14400 KiB 1.62 MiB/s 02:52 ETA503:06 ETAc5% |*| 15552 KiB 1.40 MiB/s 03:18 ETA3526 ETA772861 ETA6% |**203525002 ETAc7% |**| 24000 KiB 1.60 MiB/s 02:48 ETA5257 ETA86688749 ETA9% |***8544606 ETA1031552637 ETAc11% |***| 35456 KiB 1.77 MiB/s 02:26 ETA2% |****67357 ETAc12% |****| 36765 KiB 1.66 MiB/s 02:34 ETA99219 ETA75045446 ETA81437 ETA341728939 ETA43007 ETAc15% |*****| 46400 KiB 1.63 MiB/s 02:32 ETA6405 ETAc 15% |*****| 46482 KiB 1.52 MiB/s 02:42 ETA495 ETAc 15% |*****| 46592 KiB 1.44 MiB/s 02:52 ETA07 ETA774439694725 ETAc 16% |*****| 50624 KiB 1.39 MiB/s 02:55 ETA3753:00 ETAc 16% |*****| 50668 KiB 1.31 MiB/s 03:05 ETA816298 ETA9*753422:47 ETA20*62784532 ETA3*709766714 ETA579528000 ETA8*86144931:48 ETAc 30% |**********| 92352 KiB 2.03 MiB/s 01:40 ETA4801.973 ETA54 ETAc 32% |***********| 96320 KiB 1.96 MiB/s 01:41 ETA42 ETAc 33% |***********| 99392 KiB 1.94 MiB/s 01:41 ETA3c 33% |***********| 99 MiB 1.90 MiB/s 01:42 ETA8941018c 35% |************| 103 MiB 1.90 MiB/s 01:39 ETA48641 ETAc 35% |************| 105 MiB 1.87 MiB/s 01:40 ETA23 ETA18*12935 ETAc 39% |*************| 115 MiB 1.90 MiB/s 01:33 ETA875 ETA40*792 ETA2239427 ETAc 43% |***************| 128 MiB 1.99 MiB/s 01:23 ETA96454 ETA6*352.0118 ETA74054 ETA9*471 ETA50790 ETAc 51% |*****************| 152 MiB 2.13 MiB/s 01:06 ETA2*310937114 ETA5*6141 ETAc 55% |*******************| 163 MiB 2.12 MiB/s 01:01 ETA08*7070:56 ETA60*6222 ETAc 61% |*********************| 181 MiB 2.25 MiB/s 00:49 ETA250 ETAc 62% |*********************| 183 MiB 2.22 MiB/s 00:49 ETA1950 ETA48c 62% |*********************| 185 MiB 2.15 MiB/s 00:50 ETA45*91846 ETAc 66% |***********************| 195 MiB 2.20 MiB/s 00:44 ETA188200221 ETAc 68% |***********************| 201 MiB 2.19 MiB/s 00:41 ETA82 ETA70*82338 ETAc 72% |*************************| 212 MiB 2.24 MiB/s 00:36 ETA2c 72% |*************************| 212 MiB 2.19 MiB/s 00:37 ETA736205 ETA5*2122 ETA76629 ETA9*33306 ETAc 80% |**************************** | 235 MiB 2.29 MiB/s 00:25 ETA71993 ETA3*46340 ETA6*54916 ETAc 87% |****************************** | 257 MiB 2.39 MiB/s 00:14 ETA75 ETA8964 ETA605139*23 ETA21293746590532 ETA26019767421180c 91% |******************************* | 268 MiB 2.08 MiB/s 00:12 ETA7594310701.99761 ETA2*42 ETA21 ETA1189725423410 ETA5798609 ETA4878 ETA95* | 28067 ETAc 95% |********************************* | 282 MiB 1.75 MiB/s 00:06 ETA4633105 ETA69487675434 ETA261597873 ETA68* | 288549212 ETA4990875921 ETA40 ETA100*| 2933 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc6% |**| 1024 KiB 533.42 KiB/s 00:26 ETA487.719 ETAc6% |**| 1024 KiB 265.24 KiB/s 00:53 ETA46.117 ETAc6% |**| 1024 KiB 175.28 KiB/s 01:20 ETA65.375 ETAc6% |**| 1024 KiB 132.76 KiB/s - stalled -ccd0a: error reading fsbn 529528 of 529528-529655 (cd0 bn 529528; cn 5295 tn 0 sn6% |**| 1024 KiB 123.39 KiB/s - stalled -05.85c6% |**| 1024 KiB 99.15 KiB/s - stalled -87.48c6% |**| 1024 KiB 83.21 KiB/s - stalled -74.92c 6% |**| 1024 KiB 71.47 KiB/s - stalled -65.232.78c 35% |************| 5440 KiB 311.46 KiB/s 00:31 ETA9*6016 KiB 325.9928 ETA4****7552 KiB 387.3819 ETAc 65% |**********************| 9920 KiB 484.48 KiB/s 00:10 ETA6*10176 KiB 472.51c 66% |***********************| 10176 KiB 453.95 KiB/s 00:11 ETA31.0c 66% |***********************| 10176 KiB 417.45 KiB/s 00:12 ETA396.77c 66% |***********************| 10176 KiB 386.22 KiB/s 00:13 ETA67.78- stalled -c cd0a: error reading fsbn 535928 of 535928-536055 (cd0 bn 535928; cn 5359 tn 0 sn 66% |***********************| 10176 KiB 359.08 KiB/s - stalled -42.8674**1328 KiB 374.69 00:10 ETA100**********| 15210 KiB 480.510 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc 0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAccd0a: error reading fsbn 579780 of 579780-579795 (cd0 bn 579780; cn 5797 tn 0 sn0% || 00.00 KiB/s --:-- ETAgzip: failed to read stdin: Device busy 0% || 00.00 KiB/s --:-- ETAtar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0% || 00.00 KiB/s --:-- ETACommand failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/tests.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.10.22.07.52.40/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.10.22.07.52.40/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.10.22.07.52.40/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 429 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11402.78 real 25.50 user 14.15 sys