This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.10.29.00.20.42/anita \ --structured-log-file=/bracket/i386/test/2017.10.29.00.20.42/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.10.29.00.20.42/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.10.29.00.20.42/anita/install_tmp.iso /bracket/i386/test/2017.10.29.00.20.42/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.10.29.00.20.42/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.10.29.00.20.42/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.10.29.00.20.42/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 22514 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15786256\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block141): /bracket/i386/test/2017.10.29.00.20.42/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block302): /bracket/i386/test/2017.10.29.00.20.42/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block569): /bracket/i386/test/2017.10.29.00.20.42/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/techange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.10change floppy0 /bracket/i386/test/2017.10.change floppy0 /bracket/i386/test/2017.10.2change floppy0 /bracket/i386/test/2017.10.29chan |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...ge floppy0 /bracket/i386/test/2017.10.29.change floppy0 /bracket/i386/test/2017.10.29.0change floppy0 /bracket/i386/test/2017.10.29.00change floppy0 /bracket/i386/test/2017.10.29.00.change floppy0 /bracket/i386/test/2017.10.29.00.2change floppy0 /bracket/i386/test/2017.10.29.00.20 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5764692-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2017.10.29.00.20.change floppy0 /bracket/i386/test/2017.10.29.00.20.4change floppy0 /bracket/i386/test/2017.10.29.00.20.42change floppy0 /bracket/i386/test/2017.10.29.00.20.42/change floppy0 /bracket/i386/test/2017.10. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846860=0x155d294 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.5 (INSTALL) #0: Sun Oct 29 03:05:32 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.10.29.00.20.42-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20170831 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet addresr0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.5/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" long run test FAILURE: Run of 29 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 28 0s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 10314 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 9720 ones cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.5 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.5 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [QEMU HARDDISK ]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'QEMU HARDDISK ' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA43% |***************8704 KiB 5.49 M00:01 ETA71*********142726.210 ETA100***********| 1989083 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA13% |****5696 KiB 3.26 M00:10 ETA7*721826****110720009 ETA31*29282.927**55527144***8368828 ETA51**21376777 ETA7**374466 ETA64***688085 ETA70**94444 ETA81****33856892 ETA9***737921 ETA96** | 4012810 ETA100**| 41630795 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc4% |*| 6464 KiB 3.78 MiB/s 00:38 ETA2.653 ETAc4% |*| 6464 KiB 1.72 MiB/s 01:23 ETA4439 ETA578083744 ETA6% |**106246524 ETAc8% |**| 12352 KiB 1.56 MiB/s 01:28 ETA4435 ETAc8% |**| 12352 KiB 1.24 MiB/s 01:50 ETA168 ETA11% |***8435923 ETAc15% |*****| 23808 KiB 1.86 MiB/s 01:08 ETA717213 ETAc15% |*****| 23871 KiB 1.60 MiB/s 01:18 ETA40005123 ETAc17% |*****| 26304 KiB 1.56 MiB/s 01:19 ETA425 ETA73284c18% |******| 29184 KiB 1.45 MiB/s 01:23 ETA397 ETAc18% |******| 29184 KiB 1.32 MiB/s 01:32 ETA275 ETAc 20% |*******| 30976 KiB 1.28 MiB/s 01:33 ETA37 ETAc 20% |*******| 30976 KiB 1.18 MiB/s 01:41 ETA45 ETAc 20% |*******| 30976 KiB 1.09 MiB/s 01:49 ETA5- stalled -c 21% |*******| 32384 KiB 1.07 MiB/s 01:50 ETA34 ETAc 21% |*******| 32384 KiB 1.00 MiB/s 01:58 ETA996.56 K2:01 ETA25328 KiB 1.03 M1:51 ETAc 25% |********| 38912 KiB 1.09 MiB/s 01:42 ETA74 ETAc 25% |********| 38912 KiB 1.03 MiB/s 01:48 ETA150 ETAc 25% |********| 38912 KiB 0.98 MiB/s 01:54 ETA986.62 K6 ETAc 25% |********| 38912 KiB 961.50 KiB/s - stalled -36.27c 26% |*********| 40576 KiB 955.83 KiB/s 01:58 ETA31.242:01 ETAc 26% |*********| 40576 KiB 912.59 KiB/s 02:04 ETA890.547 ETAc 27% |*********| 42560 KiB 918.55 KiB/s 02:01 ETA892.724 ETAc 28% |*********| 44032 KiB 912.24 KiB/s 02:00 ETA9*736 KiB 899.291 ETAc 29% |**********| 44736 KiB 891.16 KiB/s 02:02 ETA63.016 ETAc 29% |**********| 44736 KiB 857.38 KiB/s 02:07 ETA30.711 ETAc 29% |**********| 44736 KiB 825.87 KiB/s 02:12 ETA03.1- stalled -6080 KiB 819.0 02:11 ETAc 30% |**********| 47168 KiB 816.47 KiB/s 02:10 ETAc 30% |********** | 47168 KiB 809.74 KiB/s 02:11 ETA 790.065 ETA680514 ETAc 31% |**********| 48896 KiB 792.06 KiB/s 02:12 ETA84.943 ETAc 31% |**********| 48896 KiB 768.16 KiB/s 02:16 ETA91523.757 ETAc 32% |***********| 50560 KiB 769.97 KiB/s 02:14 ETA2.195 ETA6*5808 KiB 827.411:58 ETAc 37% |************| 57088 KiB 832.37 KiB/s 01:56 ETA22.307 ETAc 37% |************| 57088 KiB 808.78 KiB/s 01:59 ETA799.822:01 ETAc 39% |*************| 61248 KiB 845.85 KiB/s 01:49 ETA40*24007.707 ETA6562.08 ETA25280 KiB 866.092 ETAc 45% |***************| 69632 KiB 910.66 KiB/s 01:32 ETA897.623 ETAc 45% |***************| 69632 KiB 888.23 KiB/s 01:34 ETA74.506 ETAc 45% |***************| 69632 KiB 866.23 KiB/s 01:37 ETA52.95- stalled -c 45% |***************| 69632 KiB 845.49 KiB/s - stalled -33.04c cd0a: error reading fsbn 178860 of 178860-178987 (cd0 bn 178860; cn 1788 tn 0 sn 45% |***************| 69632 KiB 824.74 KiB/s - stalled -13.56c 46% |****************| 72064 KiB 835.20 KiB/s 01:38 ETA79601.457 ETAc 47% |**************** | 72960 KiB 826.54 KiB/s 01:37 ETA 13.009 ETA3088 KiB 809.52c 48% |****************| 74624 KiB 813.31 KiB/s 01:37 ETA08.738 ETAc 48% |****************| 74624 KiB 795.87 KiB/s 01:39 ETA2.3240 ETA51*8976 KiB 825.7130 ETA2*812143.4526 ETA5*56978.3917 ETAc 58% |********************| 89984 KiB 915.43 KiB/s 01:09 ETA90240 KiB 904.8710 ETAc 58% |********************| 90240 KiB 899.81 KiB/s 01:10 ETA86.981 ETA3042.792 ETA61*3952 KiB 907.2406 ETA3*84343.70:58 ETAc 65% |**********************| 99 MiB 959.26 KiB/s 00:54 ETA3.315 ETAc 65% |**********************| 99 MiB 941.35 KiB/s 00:55 ETA35.796 ETAc 66% |***********************| 100 MiB 939.19 KiB/s 00:54 ETA2.8c 67% |***********************| 101 MiB 932.88 KiB/s 00:53 ETA1.049*49.6749 ETA705 MiB 947.648 ETAc 73% |*************************| 109 MiB 972.49 KiB/s 00:42 ETA68.30c 73% |*************************| 109 MiB 955.88 KiB/s 00:43 ETA2.004118.50 ETAc 75% |**************************| 112 MiB 959.78 KiB/s 00:39 ETA0.7040 ETAc 76% |**************************| 115 MiB 963.74 KiB/s 00:37 ETA758.326 ETA6 MiB 961.15 ETAc 78% |***************************| 117 MiB 959.49 KiB/s 00:34 ETA6.25c 78% |***************************| 117 MiB 944.54 KiB/s 00:35 ETA1.29c 78% |***************************| 117 MiB 929.97 KiB/s 00:35 ETA6.76c 78% |***************************| 117 MiB 916.06 KiB/s - stalled -2.61c 81% |**************************** | 122 MiB 935.74 KiB/s 00:30 ETA0.221 ETAc 81% |**************************** | 122 MiB 922.33 KiB/s 00:31 ETA16.7238.230 ETA3*6 MiB 932.1126 ETA58 MiB 942.823 ETAc 87% |****************************** | 131 MiB 961.12 KiB/s 00:19 ETA55.0783608 ETA1.079*4887 ETA9052.76 ETA64.14 ETA188.743 ETAc 93% |******************************** | 140 MiB 965.93 KiB/s 00:10 ETA17.6809 ETAc 93% |******************************** | 141 MiB 959.90 KiB/s 00:09 ETA5.39448.402 MiB 950.428 ETA9** | 149 MiB 989.850 ETA6.66500.9477.6769.805.74100*59.1 Finished cd0(piixide0:0:1): adapter resource shortage Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc7% |**| 320 KiB 156.72 KiB/s 00:24 ETA45.366 ETAc7% |**| 320 KiB 79.74 KiB/s 00:48 ETA5.6051 ETAc7% |**| 320 KiB 53.29 KiB/s 01:12 ETA1.415 ETAc7% |**| 320 KiB 40.02 KiB/s - stalled -38.85c56% |*******************| 2368 KiB 237.84 KiB/s 00:07 ETA0.43100****************| 4190 KiB 359.510 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 5696 KiB 3.02 MiB/s 01:35 ETA2.5055 ETAc1% || 5696 KiB 1.43 MiB/s 03:21 ETA3237 ETAc1% || 5696 KiB 973.25 KiB/s 05:03 ETA16.8722 ETA28448 KiB 1.08 M4:24 ETA3% |*11200313:34 ETA6% |**9456982:18 ETA7228482.1307 ETA86112220 ETAc9% |***| 27712 KiB 2.14 MiB/s 02:04 ETA956853 ETA1030200210 ETA212408 ETAc11% |***| 34240 KiB 2.02 MiB/s 02:08 ETA6881.9314 ETA2% |****718470 ETA865623 ETA34012831 ETA429440 ETA332801 ETA5% |*****5760872 ETA652863 ETA68444998438*564482.021:58 ETAc19% |******| 58688 KiB 2.00 MiB/s 01:57 ETA92001.962:00 ETAc20% |*******| 62528 KiB 2.00 MiB/s 01:56 ETA1.932:00 ETAc22% |*******| 66368 KiB 2.00 MiB/s 01:54 ETA1.929 ETA3*950484 ETA6*786562.1740 ETAc27% |*********| 82048 KiB 2.19 MiB/s 01:37 ETA39 ETA9*7552223 ETAc 30% |**********| 92352 KiB 2.28 MiB/s 01:29 ETA131 ETA14976429 ETAc 31% |**********| 96320 KiB 2.20 MiB/s 01:30 ETA2*740819c 33% |***********| 99 MiB 2.24 MiB/s 01:26 ETA179 ETA410188 ETAc 34% |***********| 102 MiB 2.16 MiB/s 01:28 ETA5*329 ETAc 35% |************| 104 MiB 2.09 MiB/s 01:30 ETA71 ETAc 36% |************| 107 MiB 2.08 MiB/s 01:29 ETA630 ETA710529 ETA8*287 ETA40*8141 ETA2242016 ETAc 43% |***************| 127 MiB 2.20 MiB/s 01:15 ETA176 ETA532232 ETA6*6609 ETA843324 ETAc 49% |*****************| 144 MiB 2.29 MiB/s 01:05 ETA509312 ETA15240 ETAc 53% |******************| 155 MiB 2.33 MiB/s 00:59 ETA1c 53% |******************| 158 MiB 2.31 MiB/s 00:58 ETA289 ETA5*62307 ETAc 55% |*******************| 163 MiB 2.28 MiB/s 00:56 ETA67 ETAc 56% |*******************| 165 MiB 2.25 MiB/s 00:56 ETA27 ETA8*7283 ETA60*83349 ETAc 61% |*********************| 180 MiB 2.32 MiB/s 00:48 ETA09 ETA3*546 ETA593411 ETA8*201737 ETA70*8523 ETAc 71% |************************| 210 MiB 2.52 MiB/s 00:32 ETA483 ETAc 73% |*************************| 214 MiB 2.52 MiB/s 00:31 ETA47686*245327 ETA9*32603 ETAc 79% |***************************| 234 MiB 2.58 MiB/s 00:23 ETA681*40600 ETA4*8617 ETAc 86% |****************************** | 254 MiB 2.69 MiB/s 00:14 ETA6768953 ETA6042 ETA2109*25863421 ETA40905497653173971683200 ETA2996570322*019716312008735309 ETA4351461.998 ETA897 ETA5*78166 ETA6255 ETA43324104 ETA75898766543 ETA372108* | 288798762 ETA95432190069871 ETA91260 ETA53100*4 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 192 KiB 96.80 KiB/s 02:35 ETA4.898 ETAc1% || 192 KiB 48.55 KiB/s 05:09 ETAc1% || 192 KiB 47.40 KiB/s 05:16 ETA32.297:45 ETAc1% || 192 KiB 31.69 KiB/s 07:53 ETA24.06- stalled -ccd0a: error reading fsbn 529112 of 529112-529127 (cd0 bn 529112; cn 5291 tn 0 sn1% || 192 KiB 23.87 KiB/s - stalled -gzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Unexpected EOF on archive file 1% || 192 KiB 23.78 KiB/s - stalled -Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.10.29.00.20.42/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.10.29.00.20.42/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.10.29.00.20.42/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 22514 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11382.95 real 25.65 user 13.67 sys