This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.11.09.23.20.12/anita \ --structured-log-file=/bracket/i386/test/2017.11.09.23.20.12/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.11.09.23.20.12/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.11.09.23.20.12/anita/install_tmp.iso /bracket/i386/test/2017.11.09.23.20.12/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.11.09.23.20.12/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.11.09.23.20.12/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.11.09.23.20.12/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 15947 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15782084\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block158): /bracket/i386/test/2017.11.09.23.20.12/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block307): /bracket/i386/test/2017.11.09.23.20.12/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block532): /bracket/i386/test/2017.11.09.23.20.12/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.11change floppy0 /bracket/i386/test/2017.11.change floppy0 /bracket/i386/test/2017.11.0change floppy0 /bracket/i386/test/2017.11.09chan |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...ge floppy0 /bracket/i386/test/2017.11.09.change floppy0 /bracket/i386/test/2017.11.09.2change floppy0 /bracket/i386/test/2017.11.09.23change floppy0 /bracket/i386/test/2017.11.09.23.change floppy0 /bracket/i386/test/2017.11.09.23.2change floppy0 /bracket/i386/test/2017.11.09.23.20 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5764692-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2017.11.09.23.20.change floppy0 /bracket/i386/test/2017.11.09.23.20.1change floppy0 /bracket/i386/test/2017.11.09.23.20.12change floppy0 /bracket/i386/test/2017.11.09.23.20.12/change floppy0 /bracket/i386/test/2017.11. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846860=0x155c294 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.6 (INSTALL) #0: Fri Nov 10 01:14:47 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.11.09.23.20.12-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)0000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20170831 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.6/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 5 1s (210 >= 209) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 26 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 2 0s (1391 >= 1386) cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 2.7360 cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2696 >= 2685) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.6 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.6 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA61% |*********************12288 KiB 7.83 M00:00 ETA100**************| 198908.45 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA18% |******7680 KiB 4.65 M00:07 ETA25**1056546 ETA36****523224****9328305 ETA57***23872254 ETA66****764803 ETA77***32432 ETA8****66061 ETA99**** | 4140 ETA100*| 4162009 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA5% |*8448 KiB 5.34 M00:26 ETAc8% |**| 12352 KiB 5.36 MiB/s 00:25 ETA3.2043 ETAc8% |**| 12352 KiB 2.83 MiB/s 00:48 ETA101:05 ETAc9% |***| 13952 KiB 2.17 MiB/s 01:02 ETA1.7418 ETAc9% |***| 13952 KiB 1.65 MiB/s 01:22 ETA3938 ETA44648c10% |***| 15744 KiB 1.30 MiB/s 01:43 ETA257 ETAc11% |***| 17728 KiB 1.25 MiB/s 01:45 ETA19 ETAc12% |****| 19200 KiB 1.19 MiB/s 01:50 ETA54 ETAc12% |****| 19200 KiB 1.05 MiB/s 02:04 ETA28 ETAc13% |****| 20416 KiB 1.01 MiB/s 02:08 ETA470.9812 ETAc 13% |****| 20800 KiB 958.60 KiB/s 02:18 ETA31.9522 ETAc 14% |****| 22272 KiB 944.54 KiB/s 02:19 ETA10.9224 ETAc 15% |*****| 24000 KiB 939.30 KiB/s 02:18 ETA06.9923 ETAc 16% |*****| 25664 KiB 936.24 KiB/s 02:16 ETA896.623 ETA76688 KiB 909.1619 ETAc 18% |******| 27712 KiB 904.04 KiB/s 02:19 ETA883.822 ETAc 18% |******| 27712 KiB 848.90 KiB/s 02:28 ETA30.5631 ETAc 19% |******| 29568 KiB 855.41 KiB/s 02:25 ETA34.169 ETAc 20% |*******| 30784 KiB 843.46 KiB/s 02:25 ETA20.5230 ETAc 20% |*******| 32064 KiB 833.30 KiB/s 02:26 ETA11.1630 ETA24752 KiB 862.7718 ETAc 25% |********| 38656 KiB 930.12 KiB/s 02:03 ETA10.186 ETA97445.834 ETAc 29% |**********| 45056 KiB 0.98 MiB/s 01:47 ETA312 KiB 994.60 K9 ETA6382.7650 ETAc 30% |**********| 46848 KiB 986.56 KiB/s 01:48 ETA976 KiB 968.1950 ETAc 32% |***********| 50304 KiB 0.99 MiB/s 01:41 ETA995.37 K4 ETAc 32% |***********| 50304 KiB 977.18 KiB/s 01:46 ETA58.008 ETAc 32% |***********| 50304 KiB 941.14 KiB/s 01:50 ETA21.82- stalled -c 32% |***********| 50304 KiB 907.51 KiB/s - stalled -889.84c cd0a: error reading fsbn 164328 of 164328-164455 (cd0 bn 164328; cn 1643 tn 0 sn 32% |***********| 50304 KiB 874.82 KiB/s - stalled -59.4c 32% |***********| 50304 KiB 846.27 KiB/s - stalled -30.41c 33% |***********| 51776 KiB 843.01 KiB/s 02:01 ETA28.433 ETAc 34% |***********| 53376 KiB 840.58 KiB/s 01:59 ETA27.152:01 ETAc 34% |***********| 53376 KiB 815.27 KiB/s 02:03 ETA02.035 ETAc 35% |************| 55296 KiB 819.43 KiB/s 02:00 ETA06.742 ETA77152 KiB 824.201:57 ETA40**62080 KiB 879.9844 ETA143299.7339 ETA27044.06c 44% |***************| 67840 KiB 921.80 KiB/s 01:33 ETA11.524 ETAc 44% |***************| 67840 KiB 898.11 KiB/s 01:35 ETA87.077 ETA570336 KiB 908.182 ETAc 48% |****************| 74304 KiB 947.29 KiB/s 01:24 ETA33.845 ETA9*55840.223 ETA5194275.8316 ETA3*82816 KiB 0.97 M0 ETAc 55% |*******************| 85952 KiB 1.00 MiB/s 01:05 ETA66784c 56% |*******************| 86784 KiB 0.99 MiB/s 01:06 ETA7c 56% |*******************| 87680 KiB 0.97 MiB/s 01:06 ETA785765 ETA896 KiB 992.61 Kc 58% |********************| 90048 KiB 995.65 KiB/s 01:04 ETA112 KiB 983.8091648 KiB 993.582 ETAc 60% |*********************| 93504 KiB 997.45 KiB/s 01:00 ETA1.94c 60% |*********************| 93504 KiB 976.80 KiB/s 01:01 ETA1.932 ETA5* 97 MiB 1.00 M0:52 ETAc 65% |**********************| 98 MiB 1.00 MiB/s 00:51 ETA0.99c 65% |**********************| 98 MiB 0.98 MiB/s 00:52 ETA995.91 Kc 66% |***********************| 100 MiB 0.97 MiB/s 00:50 ETA991.94 K1 ETAc 66% |***********************| 100 MiB 984.52 KiB/s 00:51 ETA73.762 ETA82 MiB 991.3748 ETA71*7 MiB 1.00 M2 ETAc 73% |*************************| 109 MiB 1.01 MiB/s 00:39 ETA040 ETA5*12236 ETAc 78% |***************************| 118 MiB 1.06 MiB/s 00:30 ETA99529 ETA81*2266 ETA3*692 ETA470 ETAc 87% |****************************** | 131 MiB 1.11 MiB/s 00:16 ETA8225 ETAc 88% |****************************** | 133 MiB 1.11 MiB/s 00:15 ETA9*44 ETA090612 ETAc 91% |******************************* | 138 MiB 1.11 MiB/s 00:10 ETA2*340208 ETA118** | 14762 ETA990 ETA505100*4 Finished cd0(piixide0:0:1): adapter resource shortage cd0(piixide0:0:1): adapter resource shortage Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 2.28 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc2% || 6272 KiB 3.72 MiB/s 01:17 ETA2.5652 ETA8320202:09 ETAc3% |*| 9216 KiB 2.05 MiB/s 02:18 ETA1.5958 ETA115848334 ETA57342.1807 ETAc6% |**| 18752 KiB 2.24 MiB/s 02:02 ETA98401.9619 ETA20224420 ETAc8% |**| 25728 KiB 2.16 MiB/s 02:04 ETA0212 ETAc9% |***| 27392 KiB 1.97 MiB/s 02:15 ETA828809 ETAc9% |***| 28992 KiB 1.82 MiB/s 02:25 ETA103097643 ETA1488730 ETA1372925 ETAc12% |****| 36992 KiB 1.84 MiB/s 02:19 ETA7625 ETA846437 ETA34134800 ETAc14% |****| 43264 KiB 1.80 MiB/s 02:19 ETA5120798 ETA5% |*****6336720 ETAc15% |*****| 47552 KiB 1.75 MiB/s 02:20 ETA688322 ETAc 16% |*****| 50752 KiB 1.75 MiB/s 02:19 ETA712006824 ETAc 17% |*****| 52928 KiB 1.70 MiB/s 02:21 ETA628 ETA363220**604167712 ETAc 21% |*******| 66176 KiB 1.87 MiB/s 02:02 ETA16 ETA3*7078481:59 ETAc 24% |********| 72960 KiB 1.91 MiB/s 01:56 ETA832:01 ETA555281:56 ETAc 27% |*********| 81856 KiB 1.96 MiB/s 01:48 ETA350 ETA86144845 ETAc 30% |**********| 90560 KiB 2.03 MiB/s 01:41 ETA1.983 ETAc 30% |**********| 92928 KiB 2.00 MiB/s 01:41 ETA139521.953 ETA4c 31% |**********| 95424 KiB 1.90 MiB/s 01:45 ETA89c 32% |***********| 97984 KiB 1.88 MiB/s 01:45 ETA66 ETA3 99 M82 ETAc 34% |***********| 100 MiB 1.88 MiB/s 01:42 ETA144 ETAc 35% |************| 104 MiB 1.87 MiB/s 01:41 ETA33 ETAc 35% |************| 105 MiB 1.83 MiB/s 01:42 ETA785 ETAc 36% |************| 107 MiB 1.75 MiB/s 01:45 ETA6 ETAc 37% |************| 109 MiB 1.73 MiB/s 01:46 ETA17 ETA9*168038 ETA41*2271 ETA3*79126 ETA53480 ETA7*82.0216 ETAc 48% |****************| 143 MiB 2.05 MiB/s 01:13 ETA9*43642 ETAc 50% |*****************| 149 MiB 2.05 MiB/s 01:10 ETA21 ETA152409 ETAc 52% |******************| 154 MiB 2.03 MiB/s 01:08 ETA19 ETAc 53% |******************| 157 MiB 2.02 MiB/s 01:07 ETA1.998 ETA492.007 ETAc 56% |*******************| 164 MiB 2.04 MiB/s 01:03 ETA14 ETA7950 ETA60**76110:55 ETA28251 ETA4*82047 ETAc 66% |***********************| 194 MiB 2.24 MiB/s 00:44 ETA17842 ETA9*204838 ETAc 70% |************************| 206 MiB 2.26 MiB/s 00:38 ETA5c 70% |************************| 207 MiB 2.23 MiB/s 00:38 ETA13*1574 ETA5*21321 ETAc 77% |**************************| 228 MiB 2.37 MiB/s 00:27 ETA38*3081*893 ETA3*454419 ETA6*5396 ETAc 87% |****************************** | 257 MiB 2.49 MiB/s 00:14 ETA8868953 ETA604129*203936432 ETA2c 90% |******************************* | 265 MiB 2.30 MiB/s 00:12 ETA29766301977614831008795421 ETA7002*1.997154220893380 ETAc 93% |******************************** | 275 MiB 1.87 MiB/s 00:09 ETA66544c 94% |******************************** | 278 MiB 1.83 MiB/s 00:08 ETA5*97 ETA802116 ETA2c 96% |********************************* | 282 MiB 1.79 MiB/s 00:06 ETA385 ETA465754 ETA463169c 97% |********************************* | 287 MiB 1.67 MiB/s 00:04 ETA3 ETAc 97% |********************************* | 287 MiB 1.66 MiB/s 00:03 ETA8* | 28842912 ETA59890659141 ETA230 ETA3100*2 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc22% |*******| 3456 KiB 1.88 MiB/s 00:06 ETA517 ETAc22% |*******| 3456 KiB 927.14 KiB/s 00:12 ETA796.34 ETAc39% |*************| 6016 KiB 1.08 MiB/s 00:08 ETA915.79 K10 ETA55******8448 KiB 1.11 M05 ETA82*********12544441 ETA99****** | 151050 ETA100*| 15210 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 192 KiB 98.01 KiB/s 05:40 ETA2.6659 ETAc0% || 192 KiB 48.60 KiB/s 11:25 ETAc0% || 192 KiB 47.09 KiB/s 11:47 ETA32.317:11 ETAc0% || 192 KiB 31.30 KiB/s 17:45 ETA24.26- stalled -3.6ccd0a: error reading fsbn 580196 of 580196-580211 (cd0 bn 580196; cn 5801 tn 0 sngzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Unexpected EOF on archive file 0% || 192 KiB 23.41 KiB/s - stalled -Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/tests.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.11.09.23.20.12/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.11.09.23.20.12/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.11.09.23.20.12/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 15947 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11355.41 real 23.85 user 13.70 sys