This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.11.13.13.47.16/anita \ --structured-log-file=/bracket/i386/test/2017.11.13.13.47.16/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.11.13.13.47.16/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.11.13.13.47.16/anita/install_tmp.iso /bracket/i386/test/2017.11.13.13.47.16/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.11.13.13.47.16/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.11.13.13.47.16/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.11.13.13.47.16/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 2803 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15786608\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block156): /bracket/i386/test/2017.11.13.13.47.16/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block343): /bracket/i386/test/2017.11.13.13.47.16/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block521): /bracket/i386/test/2017.11.13.13.47.16/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.11change floppy0 /bracket/i386/test/2017.11.change floppy0 /bracket/i386/test/2017.11.1change floppy0 /bracket/i386/test/2017.11.13chan /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5765684-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2017.11.13.change floppy0 /bracket/i386/test/2017.11.13.1change floppy0 /bracket/i386/test/2017.11.13.13change floppy0 /bracket/i386/test/2017.11.13.13.change floppy0 /bracket/i386/test/2017.11.13.13.4change floppy0 /bracket/i386/test/2017.11.13.13.47 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846828=0x155d654 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.6 (INSTALL) #0: Mon Nov 13 15:49:54 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.11.13.13.47.16-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.6/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2685 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 9718 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 4 1s (386 >= 384) cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 2 0s (1388 >= 1386) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.6 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.6 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA50% |*****************10048 KiB 6.62 M00:01 ETA78**********5552540 ETA100********| 1989082 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA17% |*****7296 KiB 4.39 M00:07 ETA23***9852234***14400036 ETA45****9136285 ETA56****2355214 ETA65***7136133 ETA72***301443.972 ETA83****494.031 ETA9*** | 387203.980 ETA100***| 416873 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc3% |*| 5312 KiB 3.14 MiB/s 00:46 ETA61442.5257 ETA48481.841:17 ETAc5% |*| 7808 KiB 1.72 MiB/s 01:22 ETA80003942 ETA7% |**10816622 ETAc10% |***| 15552 KiB 1.98 MiB/s 01:08 ETA8114 ETAc10% |***| 15552 KiB 1.56 MiB/s 01:26 ETA431 ETAc10% |***| 15552 KiB 1.29 MiB/s 01:43 ETA39 ETAc10% |***| 15552 KiB 1.11 MiB/s - stalled -05c11% |***| 17728 KiB 1.10 MiB/s 02:00 ETA065 ETAc11% |***| 17728 KiB 0.97 MiB/s 02:16 ETA968.76 K20 ETAc11% |***| 17728 KiB 899.80 KiB/s 02:31 ETA73.695 ETA3% |****20032 KiB 928.124 ETAc 14% |****| 22272 KiB 995.07 KiB/s 02:12 ETA41.629 ETAc 14% |****| 22272 KiB 914.54 KiB/s 02:23 ETA867.8331 ETAc 14% |****| 22272 KiB 846.05 KiB/s 02:35 ETA04.76- stalled -5% |*****3680 KiB 838.10 02:35 ETAc 16% |*****| 25664 KiB 862.47 KiB/s 02:28 ETA48.2131 ETAc 16% |*****| 25664 KiB 807.87 KiB/s 02:38 ETA795.5441 ETAc 19% |******| 29312 KiB 871.69 KiB/s 02:22 ETA51.876 ETA30598.413 ETA21*37934.8608 ETAc 22% |*******| 34944 KiB 924.18 KiB/s 02:08 ETA14.5010 ETAc 24% |********| 38016 KiB 956.09 KiB/s 02:01 ETA44.212 ETAc 24% |********| 38016 KiB 909.84 KiB/s 02:07 ETA899.938 ETAc 24% |********| 38016 KiB 868.26 KiB/s 02:13 ETA59.424 ETAc 24% |********| 38016 KiB 830.85 KiB/s - stalled -22.22c 26% |*********| 40192 KiB 843.02 KiB/s 02:14 ETA31.506 ETAc 26% |*********| 40192 KiB 808.89 KiB/s 02:20 ETA798.442 ETAc 26% |*********| 40192 KiB 776.52 KiB/s 02:26 ETA69.097 ETAc 26% |*********| 40192 KiB 750.13 KiB/s - stalled -38.28c cd0a: error reading fsbn 156556 of 156556-156683 (cd0 bn 156556; cn 1565 tn 0 sn 26% |*********| 40192 KiB 723.12 KiB/s - stalled -11.97c 26% |*********| 40192 KiB 697.99 KiB/s - stalled -87.60c 26% |*********| 40192 KiB 674.66 KiB/s - stalled -67.04c 27% |*********| 42112 KiB 680.82 KiB/s 02:44 ETA77.535 ETAc 27% |*********| 42112 KiB 659.48 KiB/s 02:49 ETA6.3050 ETAc 27% |*********| 42112 KiB 639.35 KiB/s 02:54 ETA6.745 ETAc 27% |*********| 42112 KiB 620.32 KiB/s - stalled -18.599*5349.91 02:47 ETA306720 KiB 665.721 ETA4*52800 KiB 737.9917 ETAc 36% |************| 56768 KiB 784.37 KiB/s 02:03 ETA70.886 ETAc 36% |************| 56768 KiB 763.10 KiB/s 02:07 ETA50.599 ETAc 36% |************| 56768 KiB 743.11 KiB/s 02:10 ETA31.14- stalled -c 36% |************| 56768 KiB 724.42 KiB/s - stalled -13.0478304 KiB 726.13 02:11 ETA40**63040 KiB 773.41:57 ETA14684.313 ETAc 43% |***************| 66880 KiB 801.18 KiB/s 01:48 ETA791.1350 ETAc 43% |***************| 66880 KiB 782.43 KiB/s 01:51 ETA72.662 ETAc 43% |***************| 66880 KiB 764.62 KiB/s 01:53 ETA55.29- stalled -c 43% |***************| 66880 KiB 747.43 KiB/s - stalled -38.84c cd0a: error reading fsbn 176652 of 176652-176779 (cd0 bn 176652; cn 1766 tn 0 sn 44% |***************| 69120 KiB 756.56 KiB/s 01:52 ETA8*75392 KiB 815.7436 ETA51*9040 KiB 846.3328 ETAc 53% |******************| 82688 KiB 875.13 KiB/s 01:21 ETA432000.96c 54% |******************| 83200 KiB 862.20 KiB/s 01:22 ETA53.0c 54% |******************| 83200 KiB 845.28 KiB/s 01:23 ETA35.674 ETAc 54% |******************| 84096 KiB 837.35 KiB/s 01:23 ETA123 KiB 827.974 ETAc 54% |******************| 84155 KiB 821.56 KiB/s 01:24 ETA12.205 ETAc 54% |******************| 84155 KiB 806.28 KiB/s 01:26 ETA5*512025 ETAc 55% |*******************| 85696 KiB 805.34 KiB/s 01:24 ETA665924.683 ETAc 56% |*******************| 86592 KiB 798.74 KiB/s 01:24 ETA89.925 ETA6564.85c 58% |********************| 90240 KiB 809.08 KiB/s 01:18 ETA2.249 ETA916487.607 ETAc 61% |*********************| 94848 KiB 828.54 KiB/s 01:11 ETA0.9c 61% |*********************| 94848 KiB 814.17 KiB/s 01:12 ETA07.103 ETAc 61% |*********************| 94848 KiB 800.42 KiB/s 01:13 ETA793.65- stalled -26960 KiB 805.52 01:10 ETA6** 100 MiB 846.7600 ETAc 68% |***********************| 103 MiB 863.61 KiB/s 00:55 ETA56.406 ETAc 68% |***********************| 103 MiB 849.86 KiB/s 00:56 ETA2.627 ETAc 69% |************************| 104 MiB 850.04 KiB/s 00:54 ETA41.985 ETA7055.043 ETA3*10 MiB 870.0847 ETAc 75% |**************************| 113 MiB 890.04 KiB/s 00:42 ETA4 MiB 886.831 ETA69.420 ETA80**20 MiB 927.632 ETAc 81% |**************************** | 122 MiB 930.90 KiB/s 00:30 ETAc 82% |**************************** | 123 MiB 931.56 KiB/s 00:29 ETA42.28 ETAc 83% |***************************** | 125 MiB 936.23 KiB/s 00:26 ETA 0.017 ETA6 MiB 923.986 ETA58 MiB 936.093 ETA7*32 MiB 956.2419 ETA83808 ETA9*49.786 ETA905 MiB 963.365 ETA178.143 ETAc 92% |******************************** | 138 MiB 970.09 KiB/s 00:12 ETA3404.300 ETAc 93% |******************************** | 141 MiB 972.17 KiB/s 00:09 ETA67.41c 93% |******************************** | 141 MiB 959.45 KiB/s 00:09 ETA4.5049.25*3 MiB 960.287 ETA9* | 149 MiB 990.810 ETA87.70100*| 1503.990.1 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 2.22 M00:00 ETA1.98 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 5696 KiB 3.32 MiB/s 01:26 ETA2.382:00 ETAc2% || 7296 KiB 1.93 MiB/s 02:28 ETA655 ETAc2% || 8960 KiB 1.57 MiB/s 03:01 ETA3530 ETA3% |*9922840 ETA414592702:43 ETAc5% |*| 15360 KiB 1.54 MiB/s 03:00 ETA4511 ETA6% |**20416742:36 ETAc8% |**| 25408 KiB 2.00 MiB/s 02:13 ETA1.8128 ETAc8% |**| 26112 KiB 1.78 MiB/s 02:30 ETA9% |***7715 ETA669 ETAc10% |***| 30528 KiB 1.68 MiB/s 02:36 ETA155271321658 ETAc11% |***| 35328 KiB 1.69 MiB/s 02:32 ETA2% |****76961 ETA814463 ETA34137128 ETA421766830 ETAc 14% |****| 42624 KiB 1.59 MiB/s 02:38 ETA8805% |*****6272613 ETA7040689659947285 ETA8*546566723 ETA97217218 ETA20*6150480 ETAc 20% |*******| 62912 KiB 1.76 MiB/s 02:11 ETA24 ETAc 22% |*******| 69120 KiB 1.84 MiB/s 02:02 ETA787 ETA3*7078494 ETAc 26% |*********| 81088 KiB 1.99 MiB/s 01:47 ETA450 ETA720421 ETAc 29% |**********| 87808 KiB 2.01 MiB/s 01:43 ETA89601.984 ETA30906883 ETAc 30% |**********| 91776 KiB 1.95 MiB/s 01:44 ETA26 ETAc 31% |**********| 93632 KiB 1.91 MiB/s 01:45 ETA877 ETAc 31% |**********| 95424 KiB 1.87 MiB/s 01:47 ETA39 ETAc 32% |***********| 97088 KiB 1.83 MiB/s 01:48 ETA7951 ETAc 33% |***********| 99584 KiB 1.81 MiB/s 01:48 ETA 98 M789 ETA7c 35% |************| 103 MiB 1.82 MiB/s 01:44 ETA795 ETA5868821 ETA8*12537 ETAc 39% |*************| 116 MiB 1.88 MiB/s 01:34 ETA65 ETA40*84 ETA12290 ETA3*89624 ETA5332.0119 ETAc 47% |****************| 139 MiB 2.05 MiB/s 01:15 ETA44006 ETA8224 ETA50*9709 ETA2*53125 ETAc 53% |******************| 156 MiB 2.11 MiB/s 01:05 ETA09c 54% |******************| 159 MiB 2.10 MiB/s 01:04 ETA075 ETA5*6292 ETA770160:57 ETA60**7222 ETAc 61% |*********************| 180 MiB 2.23 MiB/s 00:50 ETA11 ETAc 62% |*********************| 182 MiB 2.20 MiB/s 00:50 ETA18549 ETAc 63% |**********************| 185 MiB 2.16 MiB/s 00:49 ETA6450 ETA591847 ETAc 66% |***********************| 196 MiB 2.21 MiB/s 00:43 ETA194 ETA79202 ETAc 68% |***********************| 202 MiB 2.21 MiB/s 00:41 ETA189*490 ETA71112336 ETA3*564 ETA5*2191 ETAc 77% |**************************| 227 MiB 2.32 MiB/s 00:28 ETA09 ETA8*3017 ETA80*763 ETA24391 ETA4*84218 ETA7*5675 ETAc 88% |****************************** | 258 MiB 2.45 MiB/s 00:14 ETA916037163 ETA9*4233104282 ETA9065532601976732181008971 ETA5470322*01.991875423213400 ETA895809 ETA766c 94% |******************************** | 277 MiB 1.86 MiB/s 00:09 ETA858 ETA45* | 2807 ETA136 ETA6221305 ETA79487574 ETA656421703 ETA69878* | 28864932 ETA2105990876911 ETA250 ETA34100* Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc39% |*************| 6016 KiB 3.72 MiB/s 00:02 ETA2.413 ETA54*****8320292 ETAc75% |**************************| 11520 KiB 2.55 MiB/s 00:01 ETA1.9982**2483100*******| 152120 ETA1 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- cd0a: error reading fsbn 580216 of 580216-580231 (cd0 bn 580216; cn 5802 tn 0 sngzip: can't read /mnt2//i386/binary/sets/tests.tgz: Device busy 00.00 KiB/s 00.00 KiB/s 00.00 KiB/s 00.00 KiB/s cd0a: error reading fsbn 580216 of 580216-580231 (cd0 bn 580216; cn 5802 tn 0 sngzip: can't read stdin: Device busy tar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0 0.00 KiB/s Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/tests.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.11.13.13.47.16/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.11.13.13.47.16/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.11.13.13.47.16/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 2803 child_fd: 14 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11509.93 real 28.47 user 14.44 sys