This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.11.13.22.01.45/anita \ --structured-log-file=/bracket/i386/test/2017.11.13.22.01.45/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.11.13.22.01.45/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.11.13.22.01.45/anita/install_tmp.iso /bracket/i386/test/2017.11.13.22.01.45/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.11.13.22.01.45/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.11.13.22.01.45/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.11.13.22.01.45/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 16479 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 0 seconds. |/-15786608\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block147): /bracket/i386/test/2017.11.13.22.01.45/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block356): /bracket/i386/test/2017.11.13.22.01.45/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block511): /bracket/i386/test/2017.11.13.22.01.45/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.11change floppy0 /bracket/i386/test/2017.11.change floppy0 /bracket/i386/test/2017.11.1change floppy0 /bracket/i386/test/2017.11.13chan \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...ge floppy0 /bracket/i386/test/2017.11.13.change floppy0 /bracket/i386/test/2017.11.13.2change floppy0 /bracket/i386/test/2017.11.13.22change floppy0 /bracket/i386/test/2017.11.13.22.change floppy0 /bracket/i386/test/2017.11.13.22.0change floppy0 /bracket/i386/test/2017.11.13.22.01 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...Dchange floppy0 /bracket/i386/test/2017.11.13.22.01.change floppy0 /bracket/i386/test/2017.11.13.22.01.4change floppy0 /bracket/i386/test/2017.11.13.22.01.45change floppy0 /bracket/i386/test/2017.11.13.22.01.45/change floppy0 /bracket/i386/test/2017.11. /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5765684-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...13.22.01.45/achange floppy0 /bracket/i386/test/2017.11.13.22.01.45/anchange floppy0 /bracket/i386/test/2017.11.13.22.01.45/anichange floppy0 /bracket/i386/test/2017.11.13.22.01.45/anitchange floppy0 /bracket/i386/test/2017.11.13.22.01.45/anita -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846828=0x155d654 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.6 (INSTALL) #0: Tue Nov 14 01:09:28 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.11.13.22.01.45-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.6/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" long run test FAILURE: Run of 27 1s found cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.6 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.6 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA60% |*********************11968 KiB 7.78 M00:00 ETA89**********77262100****| 1989076 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA17% |*****7296 KiB 4.27 M00:07 ETA23***99203034***14464036 ETA43****830105 ETA51**214403.776**3616644 ETA64***694447*822303 ETA78****3276832 ETA83**4816092*** | 3833230 ETA8** | 410245100*| 4162014 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA5% |*8448 KiB 5.55 M00:25 ETA8% |**12992813 ETAc13% |****| 21504 KiB 6.23 MiB/s 00:20 ETA422724.677 ETA6561131 ETAc15% |*****| 24000 KiB 3.53 MiB/s 00:35 ETA1640 ETAc16% |*****| 25664 KiB 2.94 MiB/s 00:42 ETA637 ETAc18% |******| 28992 KiB 2.73 MiB/s 00:44 ETA9931459 ETA30144050 ETAc20% |*******| 31936 KiB 2.29 MiB/s 00:51 ETA165 ETAc21% |*******| 33344 KiB 2.09 MiB/s 00:56 ETA1.979 ETAc22% |*******| 34944 KiB 1.95 MiB/s 00:59 ETA831:03 ETAc22% |*******| 34944 KiB 1.75 MiB/s 01:06 ETA610 ETAc22% |*******| 34944 KiB 1.59 MiB/s 01:12 ETA0- stalled -4*74407 01:12 ETA9**45312810:58 ETAc 30% |**********| 46720 KiB 1.78 MiB/s 00:58 ETA21:00 ETAc 30% |**********| 46720 KiB 1.65 MiB/s 01:03 ETA05 ETAc 31% |**********| 47872 KiB 1.58 MiB/s 01:05 ETA90337 ETAc 31% |**********| 48320 KiB 1.49 MiB/s 01:08 ETA511 ETAc 32% |***********| 50560 KiB 1.47 MiB/s 01:08 ETA210 ETAc 33% |***********| 52160 KiB 1.43 MiB/s 01:09 ETA3811 ETAc 34% |***********| 53568 KiB 1.39 MiB/s 01:09 ETA631512 ETAc 34% |***********| 53631 KiB 1.33 MiB/s 01:13 ETA5*420804 ETA6561613 ETA872274 ETA93655 ETA7836882 ETA40**61883307 ETAc 41% |**************| 63616 KiB 1.32 MiB/s 01:06 ETA17 ETAc 41% |**************| 63616 KiB 1.27 MiB/s 01:09 ETA52592077 ETAc 46% |****************| 71232 KiB 1.35 MiB/s 00:59 ETA42421:00 ETAc 46% |****************| 71424 KiB 1.30 MiB/s 01:01 ETA273 ETA8086c 49% |*****************| 76480 KiB 1.32 MiB/s 00:57 ETA50756816 ETAc 50% |***************** | 77568 KiB 1.29 MiB/s 00:57 ETA 78 ETA69659 ETAc 51% |*****************| 79424 KiB 1.25 MiB/s 00:57 ETA48 ETAc 51% |*****************| 79424 KiB 1.22 MiB/s 00:59 ETA01:00 ETAc 51% |*****************| 79744 KiB 1.18 MiB/s 01:00 ETA71 ETAc 52% |******************| 80832 KiB 1.16 MiB/s 01:01 ETA5c 52% |******************| 80832 KiB 1.13 MiB/s 01:02 ETA23 ETAc 54% |******************| 83968 KiB 1.14 MiB/s 00:59 ETA31:00 ETA5*53120:59 ETAc 58% |********************| 89856 KiB 1.17 MiB/s 00:53 ETA907522 ETA981653 ETA62*60002146 ETA5* 98 M60 ETAc 67% |***********************| 102 MiB 1.28 MiB/s 00:37 ETA68 ETAc 68% |***********************| 103 MiB 1.27 MiB/s 00:36 ETA57 ETAc 68% |***********************| 103 MiB 1.24 MiB/s 00:37 ETA28 ETA9*417 ETA70526 ETAc 72% |*************************| 108 MiB 1.23 MiB/s 00:33 ETA24 ETAc 73% |*************************| 109 MiB 1.22 MiB/s 00:32 ETA13 ETAc 74% |*************************| 111 MiB 1.21 MiB/s 00:31 ETA02 ETAc 74% |*************************| 111 MiB 1.19 MiB/s 00:32 ETA73 ETA5*390 ETA8*72126 ETAc 80% |**************************** | 120 MiB 1.23 MiB/s 00:24 ETA2113 ETA123*6419 ETAc 85% |***************************** | 129 MiB 1.25 MiB/s 00:16 ETA7*3174 ETAc 87% |****************************** | 131 MiB 1.26 MiB/s 00:14 ETA58343 ETA9*42 ETA9051 ETAc 91% |******************************* | 137 MiB 1.24 MiB/s 00:09 ETA2*958 ETA34047 ETAc 94% |******************************** | 141 MiB 1.24 MiB/s 00:07 ETA36*454 ETAc 98% |********************************** | 148 MiB 1.27 MiB/s 00:01 ETA6990 ETA505100*4Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 3.12 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc2% || 8128 KiB 5.03 MiB/s 00:56 ETA3.221:28 ETA3% |*97922.7742 ETAc3% |*| 10752 KiB 2.31 MiB/s 02:02 ETA12640021 ETA56512591:47 ETA8% |**245763.2223 ETA9% |***75840c10% |***| 31296 KiB 3.19 MiB/s 01:22 ETA6802.958 ETAc10% |***| 31680 KiB 2.67 MiB/s 01:38 ETA5244 ETAc11% |***| 33728 KiB 2.40 MiB/s 01:48 ETA2953 ETA4304132:01 ETA609661:59 ETA2% |****8144092:02 ETAc13% |****| 39424 KiB 2.10 MiB/s 02:01 ETA40832015 ETAc13% |****| 40848 KiB 1.96 MiB/s 02:09 ETA42496012 ETA33281 ETA5% |*****6912308 ETAc15% |*****| 48064 KiB 1.90 MiB/s 02:09 ETA69280c17% |*****| 52224 KiB 1.90 MiB/s 02:07 ETA879 ETA8007815 ETAc 18% |******| 55360 KiB 1.85 MiB/s 02:09 ETA61927814 ETA97920801 ETAc 19% |******| 59456 KiB 1.76 MiB/s 02:13 ETA45 ETAc 20% |*******| 63168 KiB 1.77 MiB/s 02:10 ETA43 ETAc 20% |*******| 63168 KiB 1.67 MiB/s 02:18 ETA520 ETAc 21% |*******| 65472 KiB 1.65 MiB/s 02:19 ETA221 ETA3*705287012 ETAc 24% |********| 72512 KiB 1.70 MiB/s 02:11 ETA663 ETAc 24% |********| 72512 KiB 1.62 MiB/s 02:17 ETA5920 ETA571846611 ETA8*84480771:58 ETAc 30% |**********| 91008 KiB 1.87 MiB/s 01:49 ETA456351 ETA7712 ETAc 31% |**********| 94592 KiB 1.82 MiB/s 01:50 ETA656791 ETA3* 98 M8744 ETAc 34% |***********| 100 MiB 1.87 MiB/s 01:43 ETA45 ETA5*480 ETAc 37% |************| 108 MiB 1.92 MiB/s 01:36 ETA897 ETA8*12924 ETA40*92.0027 ETA22571 ETAc 43% |***************| 127 MiB 2.07 MiB/s 01:20 ETA41 ETA431817 ETA6*6104 ETA7813 ETA84250 ETA9*6608 ETA50985 ETA2*54212 ETAc 52% |******************| 155 MiB 2.20 MiB/s 01:02 ETA173 ETA49201 ETAc 54% |******************| 161 MiB 2.18 MiB/s 01:00 ETA61 ETA6*590:58 ETA8*71244 ETA9671 ETA61*9949 ETAc 62% |*********************| 183 MiB 2.31 MiB/s 00:47 ETA288 ETAc 62% |*********************| 184 MiB 2.27 MiB/s 00:48 ETA33*6c 64% |**********************| 188 MiB 2.23 MiB/s 00:47 ETA159225 ETA7*862 ETAc 68% |***********************| 202 MiB 2.28 MiB/s 00:40 ETA59*439 ETA71887 ETAc 72% |*************************| 212 MiB 2.29 MiB/s 00:35 ETA747303 ETAc 74% |*************************| 218 MiB 2.28 MiB/s 00:32 ETA73 ETA6*24300 ETAc 79% |***************************| 233 MiB 2.36 MiB/s 00:25 ETA45382*4182 ETA4*84218 ETA7*5675 ETA894 ETA6063 ETA4139*21392 ETA384790553c 90% |******************************* | 266 MiB 2.32 MiB/s 00:12 ETA01 ETA287c 90% |******************************* | 267 MiB 2.25 MiB/s 00:11 ETA1482018759421700082*754131021.9970 ETA6334509 ETA54346287 ETA5*9180106 ETA896287365 ETA4434 ETA752160798c 97% |********************************* | 286 MiB 1.77 MiB/s 00:04 ETA763 ETA5838*1902 ETA69876905432911 ETA1200 ETA359100* Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc 0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAccd0a: error reading fsbn 529236 of 529236-529251 (cd0 bn 529236; cn 5292 tn 0 sngzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0% || 00.00 KiB/s --:-- ETACommand failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.11.13.22.01.45/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.11.13.22.01.45/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.11.13.22.01.45/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 16479 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11331.23 real 18.38 user 13.82 sys