This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.11.24.00.30.29/anita \ --structured-log-file=/bracket/i386/test/2017.11.24.00.30.29/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.11.24.00.30.29/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.11.24.00.30.29/anita/install_tmp.iso /bracket/i386/test/2017.11.24.00.30.29/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.11.24.00.30.29/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.11.24.00.30.29/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.11.24.00.30.29/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 165 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15791500\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block171): /bracket/i386/test/2017.11.24.00.30.29/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block304): /bracket/i386/test/2017.11.24.00.30.29/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block545): /bracket/i386/test/2017.11.24.00.30.29/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.11change floppy0 /bracket/i386/test/2017.11.change floppy0 /bracket/i386/test/2017.11.2change floppy0 /bracket/i386/test/2017.11.24change floppy0 /bracket/i386/test/2017.11.24.change floppy0 /bracket/i386/test/2017.11.24.0change floppy0 /bracket/i386/test/2017.11.24.00change floppy0 /bracket/i386/test/2017.11.24.00.change floppy0 /bracket/i386/test/2017.11.24.00.3change floppy0 /bracket/i386/test/2017.11.24.00.30 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...Dchange floppy0 /bracket/i386/test/2017.11.24.00.30.change floppy0 /bracket/i386/test/2017.11.24.00.30.2change floppy0 /bracket/i386/test/2017.11.24.00.30.29change floppy0 /bracket/i386/test/2017.11.24.00.30.29/change floppy0 /bracket/i386/test/2017.11. /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5765684-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...24.00.30.29/achange floppy0 /bracket/i386/test/2017.11.24.00.30.29/anchange floppy0 /bracket/i386/test/2017.11.24.00.30.29/anichange floppy0 /bracket/i386/test/2017.11.24.00.30.29/anitchange floppy0 /bracket/i386/test/2017.11.24.00.30.29/anita -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846764=0x155e614 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.7 (INSTALL) #0: Fri Nov 24 03:51:06 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.11.24.00.30.29-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)0040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.7/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 6 0s (212 >= 209) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 28 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 29 0s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 4 1s (385 >= 384) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.7 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.7 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA46% |****************9216 KiB 5.91 M00:01 ETA72*********14336.060 ETA100**********| 1989054 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA4% |*2048 KiB 1.00 M00:38 ETA984.70 K40 ETA11% |***4800 KiB 1.19 M30 ETA2% |****53122627 ETA23****97286518 ETA51075297 ETA33***4144804 ETA7*561633 ETA46****9520990 ETA52**219522.0709 ETA60***5344157 ETA7**8160215 ETA78****32576363 ETA87***6608481 ETA95*** | 3955290 ETA100**| 41630639 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA4% |*6528 KiB 3.84 M00:37 ETA58192619 ETA8% |**1286408 ETA10% |***6512785 ETA4% |****21824903 ETA6*553661 ETA8*87722 ETA930464484 ETAc20% |*******| 31680 KiB 3.27 MiB/s 00:36 ETA2.9340 ETAc21% |*******| 33472 KiB 2.86 MiB/s 00:41 ETA595 ETAc21% |*******| 33472 KiB 2.44 MiB/s 00:48 ETA2352 ETAc22% |*******| 34944 KiB 2.22 MiB/s 00:52 ETA046 ETAc23% |********| 36352 KiB 2.04 MiB/s 00:56 ETA8641.929 ETA4718881:00 ETAc24% |********| 38336 KiB 1.81 MiB/s 01:02 ETA754 ETAc27% |*********| 41984 KiB 1.82 MiB/s 00:59 ETA741:02 ETAc28% |*********| 43328 KiB 1.73 MiB/s 01:02 ETA655 ETA40323c31% |**********| 48256 KiB 1.70 MiB/s 01:00 ETA652 ETAc 31% |**********| 48256 KiB 1.59 MiB/s 01:04 ETA46 ETAc 32% |***********| 49664 KiB 1.53 MiB/s 01:06 ETA498 ETAc 32% |***********| 49664 KiB 1.44 MiB/s 01:10 ETA02 ETAc 32% |***********| 49664 KiB 1.36 MiB/s 01:14 ETA26 ETA5004807 ETAc 35% |************| 54784 KiB 1.39 MiB/s 01:09 ETA411 ETAc 35% |************| 54784 KiB 1.32 MiB/s 01:13 ETA285 ETA6644893 ETAc 39% |*************| 60672 KiB 1.36 MiB/s 01:06 ETA28 ETAc 39% |*************| 60672 KiB 1.30 MiB/s 01:09 ETA2711 ETAc 39% |*************| 60672 KiB 1.24 MiB/s 01:12 ETA2- stalled -40*2208 01:12 ETAc 41% |**************| 63296 KiB 1.21 MiB/s 01:12 ETA03 ETAc 42% |**************| 65088 KiB 1.21 MiB/s 01:11 ETA61760c 45% |***************| 69632 KiB 1.25 MiB/s 01:05 ETA27 ETAc 45% |***************| 69632 KiB 1.20 MiB/s 01:08 ETA179 ETAc 45% |***************| 70528 KiB 1.17 MiB/s 01:09 ETA6*12326c 46% |****************| 71616 KiB 1.15 MiB/s 01:09 ETA727048 ETA39 ETAc 47% |****************| 72704 KiB 1.11 MiB/s 01:11 ETAc 47% |****************| 72704 KiB 1.10 MiB/s 01:11 ETA083 ETAc 47% |****************| 72704 KiB 1.06 MiB/s 01:14 ETA5- stalled -3600 01:14 ETAc 49% |*****************| 76032 KiB 1.06 MiB/s 01:11 ETA52 ETAc 49% |*****************| 76032 KiB 1.03 MiB/s 01:13 ETA24 ETAc 51% |*****************| 79424 KiB 1.05 MiB/s 01:08 ETA49 ETAc 51% |*****************| 79424 KiB 1.02 MiB/s 01:10 ETA11 ETA2*810209 ETA4428844 ETAc 55% |*******************| 85696 KiB 1.05 MiB/s 01:03 ETA48*90480:57 ETAc 59% |********************| 91776 KiB 1.08 MiB/s 00:55 ETA76 ETAc 59% |********************| 91776 KiB 1.05 MiB/s 00:57 ETA209c 60% |*********************| 92992 KiB 1.04 MiB/s 00:56 ETA37 ETAc 61% |*********************| 94400 KiB 1.03 MiB/s 00:55 ETA6 ETAc 63% |**********************| 97664 KiB 1.05 MiB/s 00:52 ETA4c 64% |**********************| 99776 KiB 1.05 MiB/s 00:50 ETA45 98 M37*100546 ETA8373 ETAc 71% |************************| 106 MiB 1.09 MiB/s 00:39 ETA8c 71% |************************| 106 MiB 1.07 MiB/s 00:40 ETA64*11935 ETAc 77% |**************************| 115 MiB 1.12 MiB/s 00:30 ETA18*7229 ETAc 80% |**************************** | 120 MiB 1.14 MiB/s 00:25 ETA36 ETA124 ETA2442 ETAc 83% |***************************** | 126 MiB 1.15 MiB/s 00:21 ETA4c 83% |***************************** | 126 MiB 1.12 MiB/s 00:21 ETA6*9318 ETA73146 ETA8354 ETA45 ETA9*24 ETAc 90% |******************************* | 135 MiB 1.12 MiB/s 00:13 ETAc 91% |******************************* | 137 MiB 1.12 MiB/s 00:11 ETAc 91% |******************************* | 137 MiB 1.11 MiB/s 00:11 ETA0c 91% |******************************* | 137 MiB 1.09 MiB/s 00:11 ETA2*880 ETAc 94% |******************************** | 141 MiB 1.08 MiB/s 00:08 ETAc 98% |********************************** | 148 MiB 1.12 MiB/s 00:01 ETAc 98% |********************************** | 148 MiB 1.11 MiB/s 00:01 ETA0c 98% |********************************** | 148 MiB 1.09 MiB/s 00:01 ETA8990 ETA5076100*5Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 2.23 M00:00 ETA05 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 2880 KiB 1.52 MiB/s 03:10 ETA2943 ETAc1% || 5952 KiB 1.57 MiB/s 03:02 ETA3434 ETAc1% || 5952 KiB 1.02 MiB/s 04:40 ETA936.62 K5:15 ETAc1% || 5952 KiB 776.46 KiB/s 06:20 ETA12.3254 ETAc1% || 5952 KiB 617.00 KiB/s - stalled -575.23c2% || 7488 KiB 642.31 KiB/s 07:37 ETA09.868:01 ETAc2% || 8960 KiB 654.53 KiB/s 07:26 ETA27.9245 ETAc4% |*| 12480 KiB 797.43 KiB/s 06:01 ETA544 KiB 766.2516 ETAc4% |*| 12544 KiB 710.25 KiB/s 06:46 ETA683.167:02 ETAc 4% |*| 12544 KiB 641.88 KiB/s 07:29 ETA12.4151 ETAc 4% |* | 12544 KiB 582.71 KiB/s - stalled - 57.65c cd0a: error reading fsbn 239692 of 239692-239819 (cd0 bn 239692; cn 2396 tn 0 sn 4% |*| 12544 KiB 533.22 KiB/s - stalled -12.31c 4% |* | 12544 KiB 491.04 KiB/s - stalled - 76.294400 KiB 521.13 09:10 ETAc 5% |*| 17920 KiB 635.95 KiB/s 07:25 ETA6% |**88160.597 ETAc 6% |**| 18816 KiB 623.69 KiB/s 07:32 ETA592.6356 ETAc 6% |**| 18816 KiB 583.26 KiB/s 08:03 ETA57.1726 ETA20160 KiB 589.117:56 ETA86880 KiB 755.066:03 ETA9% |***8096 KiB 770.645:54 ETA91204.191 ETAc 10% |***| 30464 KiB 795.41 KiB/s 05:40 ETA2320 KiB 812.0430 ETA512 KiB 808.872 ETA2% |****69988.054:57 ETA75687.586 ETA39872 KiB 913.3145 ETA41920 KiB 946.1333 ETA45056 KiB 987.0419 ETAc 15% |*****| 47168 KiB 0.99 MiB/s 04:10 ETA68192809 ETAc 16% |*****| 48384 KiB 999.69 KiB/s 04:12 ETA50112 KiB 0.98 M08 ETA1076 ETA9*8111.103:34 ETAc 20% |*******| 62912 KiB 1.16 MiB/s 03:19 ETA422 ETA26880910 ETA4*7366422:50 ETA7*815364131 ETA9*81925018 ETAc 29% |**********| 89536 KiB 1.49 MiB/s 02:18 ETA720 ETAc 30% |**********| 92928 KiB 1.50 MiB/s 02:15 ETA477 ETAc 32% |***********| 96896 KiB 1.51 MiB/s 02:11 ETA484 ETA856091 ETA3 99 M5108 ETA5*10253 ETAc 36% |************| 106 MiB 1.56 MiB/s 02:00 ETA51 ETAc 36% |************| 106 MiB 1.52 MiB/s 02:03 ETA04 ETA7921 ETA8*1361:55 ETA40*86049 ETAc 40% |**************| 119 MiB 1.60 MiB/s 01:48 ETA5850 ETA2246244 ETAc 44% |***************| 129 MiB 1.67 MiB/s 01:38 ETA59 ETA318 ETAc 46% |****************| 135 MiB 1.68 MiB/s 01:34 ETA6655 ETA7972 ETA9*447127 ETAc 50% |*****************| 149 MiB 1.74 MiB/s 01:23 ETA214 ETA2*54419 ETAc 52% |******************| 155 MiB 1.73 MiB/s 01:19 ETA220 ETAc 54% |******************| 160 MiB 1.74 MiB/s 01:16 ETA37 ETAc 54% |******************| 161 MiB 1.72 MiB/s 01:16 ETA5*2130c 56% |*******************| 165 MiB 1.71 MiB/s 01:14 ETA695 ETA78713 ETA9*75607 ETA60*875 ETAc 62% |*********************| 183 MiB 1.79 MiB/s 01:01 ETA3*60 ETA70:59 ETA490807 ETA526 ETA7*851 ETAc 68% |***********************| 200 MiB 1.84 MiB/s 00:50 ETA370*7746 ETAc 72% |*************************| 212 MiB 1.91 MiB/s 00:42 ETA388c 73% |*************************| 216 MiB 1.88 MiB/s 00:41 ETA75*229137 ETAc 77% |**************************| 227 MiB 1.93 MiB/s 00:34 ETA183 ETAc 80% |**************************** | 235 MiB 1.95 MiB/s 00:29 ETA478 ETA3*4475 ETA492.002 ETAc 85% |***************************** | 251 MiB 2.00 MiB/s 00:21 ETA1.987*62.0118 ETA897 ETA06 ETA601.99189*72655 ETA3443290514 ETA068987574321180798973 ETA65470322*106981765432210332 ETA45591 ETA8676470 ETA89509 ETA45* | 2808 ETA1237 ETA6326 ETA1405495 ETAc 97% |********************************* | 285 MiB 1.49 MiB/s 00:05 ETA876654734 ETA28* | 288103 ETA9398769052 ETA439221 ETA310 ETA100*| 294 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc20% |*******| 3072 KiB 1.57 MiB/s 00:07 ETA428 ETAc39% |*************| 6016 KiB 1.58 MiB/s 00:05 ETA376 ETA56******85744 ETA70*****1075262 ETA92******** | 14016780 ETA100***| 152108 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAccd0a: error reading fsbn 580292 of 580292-580307 (cd0 bn 580292; cn 5802 tn 0 sngzip: failed to read stdin: Device busy 0% || 00.00 KiB/s --:-- ETAtar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0% || 00.00 KiB/s --:-- ETACommand failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/tests.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.11.24.00.30.29/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.11.24.00.30.29/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.11.24.00.30.29/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 165 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11403.85 real 29.12 user 13.13 sys