This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.11.27.01.34.06/anita \ --structured-log-file=/bracket/i386/test/2017.11.27.01.34.06/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.11.27.01.34.06/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.11.27.01.34.06/anita/install_tmp.iso /bracket/i386/test/2017.11.27.01.34.06/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.11.27.01.34.06/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.11.27.01.34.06/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.11.27.01.34.06/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 2047 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15791452\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block145): /bracket/i386/test/2017.11.27.01.34.06/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block312): /bracket/i386/test/2017.11.27.01.34.06/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block593): /bracket/i386/test/2017.11.27.01.34.06/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.11change floppy0 /bracket/i386/test/2017.11.change floppy0 /bracket/i386/test/2017.11.2change floppy0 /bracket/i386/test/2017.11.27chan \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...ge floppy0 /bracket/i386/test/2017.11.27.change floppy0 /bracket/i386/test/2017.11.27.0change floppy0 /bracket/i386/test/2017.11.27.01change floppy0 /bracket/i386/test/2017.11.27.01.change floppy0 /bracket/i386/test/2017.11.27.01.3change floppy0 /bracket/i386/test/2017.11.27.01.34 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...Dchange floppy0 /bracket/i386/test/2017.11.27.01.34.change floppy0 /bracket/i386/test/2017.11.27.01.34.0change floppy0 /bracket/i386/test/2017.11.27.01.34.06change floppy0 /bracket/i386/test/2017.11.27.01.34.06/change floppy0 /bracket/i386/test/2017.11.27.01.34.06/achange floppy0 /bracket/i386/test/2017.11.27.01.34.06/anchange floppy0 /bracket/i386/test/2017.11.27.01.34.06/anichange floppy0 /bracket/i386/test/2017.11.27.01.34.06/anitchange floppy0 /bracket/i386/test/2017.11.27.01.34.06/anita /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5765748-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...[Dchange floppy0 /bracket/i386/test/2017.11.27.01.34.06/anita/change floppy0 /bracket/i386/test/2017.11.27.01.34.06/anita/dchange floppy0 /bracket/i386/test/2017.11.27.01.34.06/anita/dochange floppy0 /bracket/i386/test/2017.11.27.01.34.06/anita/dow -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846764=0x155e654 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.7 (INSTALL) #0: Mon Nov 27 05:10:38 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.11.27.01.34.06-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured FWCF (QEMU0002) at acpi0 not configured apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.7/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" long run test FAILURE: Run of 29 0s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 10283 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 2.15040 cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 10309 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 1 0s (2699 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 27 0s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 1 0s (2695 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 51.9120 cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 9718 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 5 0s (217 >= 209) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.7 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.7 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA63% |**********************12608 KiB 8.42 M00:00 ETA100*************| 198908 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA19% |******8000 KiB 4.52 M00:07 ETA23**98564035****145923.936 ETA43***83044.185 ETA56****2361674 ETA64***675213 ETA71**97603.859***32942 ETA87***648751 ETA94** | 39232660 ETA100***| 4163053 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETA4% |*6720 KiB 1.82 M01:18 ETA58962.0608 ETA10% |***164483.000:44 ETAc15% |*****| 23680 KiB 3.65 MiB/s 00:34 ETA4000641 ETA6642.893 ETAc18% |******| 27968 KiB 2.84 MiB/s 00:43 ETA617 ETA9302056c21% |*******| 32384 KiB 2.55 MiB/s 00:46 ETA3151 ETAc22% |*******| 34048 KiB 2.33 MiB/s 00:50 ETA105 ETAc23% |********| 35584 KiB 2.14 MiB/s 00:53 ETA1.99 ETA641668 ETAc25% |********| 38912 KiB 1.91 MiB/s 00:58 ETA879 ETAc26% |*********| 40448 KiB 1.81 MiB/s 01:01 ETA772 ETAc28% |*********| 43904 KiB 1.81 MiB/s 00:59 ETA751:01 ETAc 29% |**********| 45824 KiB 1.74 MiB/s 01:00 ETA692 ETAc 29% |**********| 45824 KiB 1.62 MiB/s 01:05 ETA577 ETAc 30% |**********| 47168 KiB 1.55 MiB/s 01:06 ETA18 ETAc 31% |**********| 48576 KiB 1.50 MiB/s 01:08 ETA4510 ETAc 32% |***********| 49920 KiB 1.45 MiB/s 01:09 ETA50304211 ETAc 32% |***********| 50304 KiB 1.38 MiB/s 01:13 ETA45 ETA381626 ETAc 34% |***********| 53504 KiB 1.36 MiB/s 01:11 ETA14 ETAc 36% |************| 55680 KiB 1.34 MiB/s 01:11 ETA03 ETAc 37% |************| 57024 KiB 1.31 MiB/s 01:11 ETA274 ETAc 37% |************| 57024 KiB 1.25 MiB/s 01:15 ETA17 ETAc 37% |************| 57024 KiB 1.20 MiB/s 01:18 ETA16- stalled -c 37% |************| 58368 KiB 1.18 MiB/s 01:18 ETA8*68520 ETA945619 ETAc 40% |**************| 63040 KiB 1.19 MiB/s 01:14 ETA75 ETAc 40% |**************| 63040 KiB 1.14 MiB/s 01:17 ETA38 ETAc 40% |**************| 63040 KiB 1.10 MiB/s 01:20 ETA091 ETA143840 ETAc 42% |**************| 65792 KiB 1.09 MiB/s 01:18 ETA79 ETAc 42% |**************| 65792 KiB 1.06 MiB/s 01:21 ETA42 ETA5*9440816 ETA701447c 46% |****************| 71424 KiB 1.08 MiB/s 01:14 ETAc 46% |****************| 71424 KiB 1.06 MiB/s 01:15 ETA56 ETA38 ETAc 46% |****************| 71424 KiB 1.02 MiB/s 01:18 ETA0- stalled -c 46% |****************| 71424 KiB 0.99 MiB/s - stalled -c 47% |****************| 72384 KiB 0.98 MiB/s 01:20 ETA960c 47% |****************| 72960 KiB 989.16 KiB/s 01:21 ETA2.502 ETA3216 KiB 967.753 ETAc 49% |*****************| 75840 KiB 993.96 KiB/s 01:18 ETA75.9220 ETAc 49% |*****************| 75840 KiB 968.56 KiB/s 01:20 ETA51.412 ETAc 49% |*****************| 76800 KiB 956.52 KiB/s 01:20 ETA5074447.9c 51% |*****************| 78528 KiB 953.84 KiB/s 01:19 ETA9104 KiB 945.03c 51% |*****************| 79104 KiB 938.30 KiB/s 01:19 ETA23.2821 ETAc 51% |*****************| 79616 KiB 922.04 KiB/s 01:20 ETA2*807040.3519 ETAc 52% |****************** | 80704 KiB 913.57 KiB/s 01:20 ETA 00.011 ETA893.235*5376 KiB 934.4813 ETAc 58% |********************| 90816 KiB 981.31 KiB/s 01:04 ETA9177123 ETAc 59% |********************| 91776 KiB 971.46 KiB/s 01:03 ETA60.474 ETA51.885 ETAc 61% |*********************| 95040 KiB 974.93 KiB/s 01:00 ETA64.651 ETAc 63% |**********************| 98304 KiB 989.54 KiB/s 00:56 ETA76.36c 63% |**********************| 98304 KiB 970.09 KiB/s 00:57 ETA57.88 ETAc 64% |**********************| 98944 KiB 957.58 KiB/s 00:57 ETA97762.826 ETA47.487 ETAc 64% |**********************| 99776 KiB 935.04 KiB/s 00:57 ETA29.728 ETAc 65% |**********************| 98 MiB 932.13 KiB/s 00:56 ETA26.67c 65% |**********************| 98 MiB 915.11 KiB/s 00:57 ETA0.26c 65% |**********************| 98 MiB 898.86 KiB/s 00:58 ETA4.2c 65% |**********************| 98 MiB 884.03 KiB/s - stalled -77.82c cd0a: error reading fsbn 204316 of 204316-204443 (cd0 bn 204316; cn 2043 tn 0 sn 65% |**********************| 98 MiB 869.01 KiB/s - stalled -2.7c 67% |***********************| 102 MiB 881.92 KiB/s 00:56 ETA74.478335 ETA71*7 MiB 910.0647 ETAc 73% |*************************| 109 MiB 915.20 KiB/s 00:45 ETA4.75c 74% |*************************| 111 MiB 912.76 KiB/s 00:43 ETA1.45c 74% |*************************| 111 MiB 898.30 KiB/s 00:44 ETA7.17c 74% |*************************| 111 MiB 884.43 KiB/s 00:45 ETA3.1c 75% |**************************| 112 MiB 882.78 KiB/s 00:43 ETA1.30c 77% |**************************| 116 MiB 894.24 KiB/s 00:39 ETA1.41c 77% |**************************| 116 MiB 880.96 KiB/s 00:39 ETA78.2340 ETAc 77% |**************************| 116 MiB 867.95 KiB/s 00:40 ETA5.678*77.5938 ETAc 79% |***************************| 119 MiB 879.25 KiB/s 00:35 ETA80*205.824 ETAc 80% |**************************** | 120 MiB 873.89 KiB/s 00:34 ETA63.615 ETA373*6 MiB 892.7227 ETAc 85% |***************************** | 128 MiB 903.16 KiB/s 00:24 ETA6*30 MiB 912.722 ETAc 86% |****************************** | 130 MiB 907.70 KiB/s 00:22 ETA0.13828.940 ETAc 88% |****************************** | 133 MiB 907.65 KiB/s 00:18 ETA9*4 MiB 911.307 ETAc 89% |******************************* | 134 MiB 903.30 KiB/s 00:17 ETA9054.956 ETA17 MiB 910.484 ETAc 92% |******************************** | 139 MiB 916.01 KiB/s 00:12 ETA3407.51 ETAc 93% |******************************** | 140 MiB 912.56 KiB/s 00:11 ETA05.71c 93% |******************************** | 140 MiB 901.16 KiB/s 00:11 ETA894.2916.930 ETA5*3 MiB 906.6207 ETA9* | 149 MiB 934.591 ETA1.180 ETA50 MiB 927.94.0518.763.2008.57100*4.3 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 2.78 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA3% |*9408 KiB 6.46 M00:44 ETAc4% |*| 14400 KiB 5.78 MiB/s 00:48 ETA3.921:11 ETAc5% |*| 15360 KiB 3.37 MiB/s 01:22 ETA2.6943 ETAc5% |*| 15360 KiB 2.32 MiB/s 02:00 ETA1.9919 ETA6% |**95842.21:59 ETAc7% |**| 23808 KiB 2.45 MiB/s 01:50 ETA72202:02 ETA84384089 ETAc8% |**| 25536 KiB 1.98 MiB/s 02:15 ETA6008524 ETA9% |***74563 ETA9374c10% |***| 31168 KiB 1.86 MiB/s 02:21 ETA2704 ETA15136718 ETA2% |****763267 ETA8080220 ETA39872144275515 ETA44804 ETAc15% |*****| 47040 KiB 1.87 MiB/s 02:12 ETA6838453 ETA908806 ETA72778 ETAc17% |*****| 52224 KiB 1.78 MiB/s 02:16 ETA320 ETA8*65128111 ETA20*61440902 ETAc21% |*******| 63360 KiB 1.89 MiB/s 02:02 ETA55 ETA2873691:56 ETA4*7283291 ETA581442.1043 ETAc 27% |*********| 83136 KiB 2.15 MiB/s 01:38 ETA140 ETAc 28% |*********| 86528 KiB 2.13 MiB/s 01:37 ETA0840 ETA9*8640939 ETAc 29% |**********| 89920 KiB 2.06 MiB/s 01:40 ETA21 ETAc 31% |**********| 93632 KiB 2.06 MiB/s 01:38 ETA041 ETA2*6960437 ETAc 33% |***********| 99 MiB 2.09 MiB/s 01:33 ETA41006c 34% |***********| 101 MiB 2.06 MiB/s 01:33 ETA215 ETA1.99c 35% |************| 104 MiB 1.97 MiB/s 01:36 ETA57 ETAc 36% |************| 107 MiB 1.96 MiB/s 01:35 ETA26 ETA7954 ETA9*152.0029 ETAc 39% |*************| 117 MiB 2.00 MiB/s 01:28 ETA1.969 ETA41*212.015 ETAc 42% |**************| 125 MiB 2.03 MiB/s 01:23 ETA03*821 ETA533617 ETA6*7104 ETA84240 ETAc 50% |*****************| 147 MiB 2.17 MiB/s 01:07 ETA48 ETA832*5384 ETAc 52% |******************| 155 MiB 2.16 MiB/s 01:03 ETA44 ETAc 53% |******************| 156 MiB 2.13 MiB/s 01:04 ETA05 ETA46032 ETA6*790:57 ETA8*73233 ETA60*761 ETA181749 ETAc 62% |*********************| 183 MiB 2.28 MiB/s 00:48 ETA59 ETA3*667 ETAc 64% |**********************| 188 MiB 2.25 MiB/s 00:46 ETA37 ETA59254 ETA7*891 ETAc 68% |***********************| 200 MiB 2.29 MiB/s 00:40 ETA61 ETA9*3839 ETA7110326 ETAc 72% |*************************| 212 MiB 2.31 MiB/s 00:35 ETA2936313 ETA5*2031 ETAc 77% |**************************| 226 MiB 2.36 MiB/s 00:28 ETA483c 79% |***************************| 234 MiB 2.38 MiB/s 00:25 ETA80*564 ETA524281 ETA4*84318 ETA7*5784 ETA8976063 ETA5c 88% |****************************** | 261 MiB 2.42 MiB/s 00:13 ETA19*2397354104282 ETA7905541061875420708763 ETA431101.988652 ETA9310887065432*17973 ETA614202 ETAc 92% |******************************** | 272 MiB 1.68 MiB/s 00:13 ETA2 ETA763 ETAc 93% |******************************** | 273 MiB 1.66 MiB/s 00:12 ETA45541 ETAc 93% |******************************** | 275 MiB 1.62 MiB/s 00:11 ETA4610 ETA8209 ETA5*9108 ETA8015927 ETA687366 ETA54432c 96% |********************************* | 284 MiB 1.52 MiB/s 00:06 ETA1505 ETA749876654c 97% |********************************* | 286 MiB 1.44 MiB/s 00:05 ETA34 ETA72103988* | 2887653 ETA9432102987906542 ETA3c 99% |********************************** | 292 MiB 1.22 MiB/s 00:01 ETA 99% |********************************** | 292 MiB 1.22 MiB/s 00:01 ETAc0 ETA 99% |********************************** | 292 MiB 1.22 MiB/s 00:00 ETAc31c 99% |********************************** | 293 MiB 1.21 MiB/s 00:00 ETA0c cd0a: error reading fsbn 413024 of 413024-413151 (cd0 bn 413024; cn 4130 tn 0 sn 99% |********************************** | 293 MiB 1.20 MiB/s 00:00 ETA19c 99% |********************************** | 293 MiB 1.19 MiB/s 00:00 ETA8- stalled - 99% |********************************** | 293 MiB 1.18 MiB/s - stalled -c7c 99% |********************************** | 293 MiB 1.17 MiB/s - stalled -6c cd0a: error reading fsbn 413152 of 413152-413199 (cd0 bn 413152; cn 4131 tn 0 sn 99% |********************************** | 293 MiB 1.16 MiB/s - stalled -5c 99% |********************************** | 293 MiB 1.15 MiB/s - stalled -4 99% |********************************** | 293 MiB 1.14 MiB/s - stalled -c3 99% |********************************** | 293 MiB 1.13 MiB/s - stalled -c2c cd0a: error reading fsbn 413200 of 413200-413203 (cd0 bn 413200; cn 4132 tn 0 sn 99% |********************************** | 293 MiB 1.12 MiB/s - stalled -1c 99% |********************************** | 293 MiB 1.11 MiB/s - stalled -c 99% |********************************** | 293 MiB 1.10 MiB/s - stalled -c 99% |********************************** | 293 MiB 1.09 MiB/s - stalled -c cd0a: error reading fsbn 413024 of 413024-413039 (cd0 bn 413024; cn 4130 tn 0 sn gzip: failed to read stdin: Device busy tar: End of archive volume 1 reachedtar: Unexpected EOF on archive file 99% |********************************** | 293 MiB 1.09 MiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.11.27.01.34.06/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.11.27.01.34.06/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.11.27.01.34.06/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 2047 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11465.05 real 36.15 user 13.84 sys