This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.11.30.16.00.48/anita \ --structured-log-file=/bracket/i386/test/2017.11.30.16.00.48/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.11.30.16.00.48/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.11.30.16.00.48/anita/install_tmp.iso /bracket/i386/test/2017.11.30.16.00.48/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.11.30.16.00.48/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.11.30.16.00.48/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.11.30.16.00.48/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 21728 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15806244\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block189): /bracket/i386/test/2017.11.30.16.00.48/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block374): /bracket/i386/test/2017.11.30.16.00.48/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block579): /bracket/i386/test/2017.11.30.16.00.48/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.11change floppy0 /bracket/i386/test/2017.11.change floppy0 /bracket/i386/test/2017.11.3change floppy0 /bracket/i386/test/2017.11.30chan \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...ge floppy0 /bracket/i386/test/2017.11.30.change floppy0 /bracket/i386/test/2017.11.30.1change floppy0 /bracket/i386/test/2017.11.30.16change floppy0 /bracket/i386/test/2017.11.30.16.change floppy0 /bracket/i386/test/2017.11.30.16.0change floppy0 /bracket/i386/test/2017.11.30.16.00 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...Dchange floppy0 /bracket/i386/test/2017.11.30.16.00.change floppy0 /bracket/i386/test/2017.11.30.16.00.4change floppy0 /bracket/i386/test/2017.11.30.16.00.48change floppy0 /bracket/i386/test/2017.11.30.16.00.48/change floppy0 /bracket/i386/test/2017.11. /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5766076-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...30.16.00.48/achange floppy0 /bracket/i386/test/2017.11.30.16.00.48/anchange floppy0 /bracket/i386/test/2017.11.30.16.00.48/anichange floppy0 /bracket/i386/test/2017.11.30.16.00.48/anitchange floppy0 /bracket/i386/test/2017.11.30.16.00.48/anita -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+846756=0x1561794 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.7 (INSTALL) #0: Thu Nov 30 18:18:19 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.11.30.16.00.48-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.7/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 3 0s (724 >= 723) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 27 0s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too few runs of 4 1s (239 <= 240) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.7 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.7 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- FinishedHit enter to continue The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA61% |*********************12288 KiB 8.16 M00:00 ETA100**************| 1992075 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA13% |****5632 KiB 3.19 M00:10 ETA7*73602728****11776109 ETA33**4080178 ETA46*****952466 ETA5***23488614 ETA67****79633 ETA71*96964483*****34560571 ETA92*** | 38336610 ETA100***| 416005346 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA4% |*6848 KiB 4.27 M00:33 ETA6% |**9984511% |***169605.0426 ETAc14% |****| 22336 KiB 4.89 MiB/s 00:26 ETA3.9132 ETA6*4640783 ETAc16% |*****| 25536 KiB 3.25 MiB/s 00:38 ETA2.9842 ETAc17% |*****| 27520 KiB 2.79 MiB/s 00:44 ETA587 ETA9*3046496 ETAc20% |*******| 31680 KiB 2.48 MiB/s 00:48 ETA8082952 ETA3*6352446 ETAc26% |*********| 40448 KiB 2.52 MiB/s 00:43 ETA406 ETAc28% |*********| 43904 KiB 2.45 MiB/s 00:43 ETA306 ETAc29% |**********| 45568 KiB 2.29 MiB/s 00:46 ETA760178 ETA608050 ETAc32% |***********| 50304 KiB 2.18 MiB/s 00:46 ETA08 ETA4254107 ETA8**8560241 ETA40*627843238 ETA2553636 ETA6**71552462 ETA50*7120529 ETA3*81792626 ETA6*6848704 ETAc57% |*******************| 89024 KiB 2.66 MiB/s 00:23 ETA594 ETA9*91648603 ETA63**8367119 ETA7* 101 M87 ETA71*6855 ETAc 71% |************************| 108 MiB 2.80 MiB/s 00:15 ETA74c 72% |*************************| 109 MiB 2.70 MiB/s 00:15 ETA63c 75% |**************************| 112 MiB 2.66 MiB/s 00:14 ETA58c 75% |**************************| 114 MiB 2.57 MiB/s 00:14 ETA49c 75% |**************************| 114 MiB 2.46 MiB/s 00:14 ETA395 ETA67c 78% |***************************| 118 MiB 2.39 MiB/s 00:13 ETA95c 79% |***************************| 118 MiB 2.30 MiB/s 00:13 ETA2693c 81% |**************************** | 121 MiB 2.23 MiB/s 00:12 ETA1927c 84% |***************************** | 126 MiB 2.20 MiB/s 00:10 ETA5809 ETAc 86% |****************************** | 129 MiB 2.17 MiB/s 00:09 ETA47312c 88% |****************************** | 133 MiB 2.13 MiB/s 00:08 ETA9*407 ETAc 89% |******************************* | 135 MiB 2.10 MiB/s 00:07 ETA9007c 90% |******************************* | 136 MiB 2.05 MiB/s 00:06 ETA2*845 ETA93c 93% |******************************** | 141 MiB 2.03 MiB/s 00:04 ETA401.976*52.002 ETA9* | 14920 ETA01.9753501886100*4Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA97% |********************************* | 4096 KiB 2.02 M00:00 ETA9* | 41601100*| 4191.74 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 2752 KiB 1.38 MiB/s 03:29 ETA2945 ETAc0% || 2752 KiB 703.34 KiB/s 07:05 ETA682.4218 ETAc2% || 8704 KiB 1.46 MiB/s 03:14 ETA2841 ETAc2% || 8704 KiB 1.14 MiB/s 04:09 ETA0.9947 ETA3% |*97281.010 ETAc5% |*| 15360 KiB 1.43 MiB/s 03:14 ETA2935 ETAc5% |*| 16640 KiB 1.32 MiB/s 03:30 ETA74722443 ETAc5% |*| 17472 KiB 1.19 MiB/s 03:52 ETA084:15 ETA6% |**9200153:59 ETAc7% |**| 23744 KiB 1.31 MiB/s 03:25 ETA2338 ETAc 7% |**| 23744 KiB 1.20 MiB/s 03:45 ETA124:01 ETA8483233:57 ETAc 9% |***| 28544 KiB 1.22 MiB/s 03:37 ETA905618 ETAc 10% |***| 30400 KiB 1.20 MiB/s 03:40 ETA45175 ETAc 10% |***| 30445 KiB 1.11 MiB/s 03:57 ETA116825 ETA289614 ETA14624545 ETAc 12% |****| 38080 KiB 1.20 MiB/s 03:32 ETA208195 ETA3936077 ETA420482226 ETAc 14% |****| 42368 KiB 1.19 MiB/s 03:31 ETA66 ETAc 14% |****| 42368 KiB 1.13 MiB/s 03:43 ETA08 ETAc 14% |****| 45120 KiB 1.14 MiB/s 03:39 ETA5% |*****8883c 15% |*****| 45888 KiB 1.10 MiB/s 03:46 ETA0850 ETAc 15% |*****| 45888 KiB 1.05 MiB/s 03:56 ETA24:02 ETAc 15% |*****| 45888 KiB 1.00 MiB/s 04:07 ETA0.98- stalled -6784 04:12 ETAc 16% |*****| 49280 KiB 1.00 MiB/s 04:04 ETA0.997 ETAc 16% |*****| 49280 KiB 993.68 KiB/s 04:14 ETA77.178 ETA753568 KiB 1.01 M3:58 ETA9*9904131 ETAc 22% |*******| 66688 KiB 1.21 MiB/s 03:08 ETA826 ETA09 ETAc 24% |********| 73600 KiB 1.27 MiB/s 02:55 ETA48 ETAc 24% |********| 73600 KiB 1.22 MiB/s 03:01 ETA04 ETA5603222:59 ETAc 26% |*********| 80448 KiB 1.27 MiB/s 02:48 ETA552 ETA71792649 ETAc 27% |*********| 84224 KiB 1.26 MiB/s 02:47 ETA58 ETAc 28% |*********| 85696 KiB 1.25 MiB/s 02:48 ETA49 ETAc 28% |*********| 85696 KiB 1.21 MiB/s 02:53 ETA04 ETAc 28% |*********| 85696 KiB 1.18 MiB/s 02:58 ETA79 ETAc 29% |**********| 87616 KiB 1.17 MiB/s 02:57 ETA69 ETAc 29% |**********| 87616 KiB 1.14 MiB/s 03:02 ETA33 ETA966441 ETAc 30% |**********| 91008 KiB 1.14 MiB/s 02:58 ETA23:02 ETAc 30% |**********| 91008 KiB 1.12 MiB/s 03:03 ETA06 ETAc 30% |**********| 91008 KiB 1.09 MiB/s 03:08 ETA7- stalled -30569 03:06 ETAc 32% |***********| 98624 KiB 1.14 MiB/s 02:53 ETA952034 ETAc 32% |***********| 99520 KiB 1.12 MiB/s 02:55 ETA08 ETAc 32% |***********| 99520 KiB 1.10 MiB/s 02:59 ETA083:02 ETAc 32% |***********| 99520 KiB 1.07 MiB/s 03:03 ETA5- stalled -3648 03:06 ETAc 33% |***********| 98 MiB 1.05 MiB/s 03:06 ETAc 33% |*********** | 98 MiB 1.04 MiB/s 03:06 ETA 210 ETAc 33% |***********| 98 MiB 1.00 MiB/s 03:14 ETA5*10562:57 ETAc 36% |************| 107 MiB 1.06 MiB/s 02:55 ETA57 ETAc 36% |************| 108 MiB 1.06 MiB/s 02:54 ETA56 ETAc 37% |************| 109 MiB 1.04 MiB/s 02:57 ETA105 ETAc 38% |*************| 112 MiB 1.05 MiB/s 02:51 ETA460 ETA51 ETAc 39% |*************| 117 MiB 1.07 MiB/s 02:44 ETA66 ETA40*94 ETAc 40% |**************| 120 MiB 1.06 MiB/s 02:43 ETAc 42% |**************| 126 MiB 1.09 MiB/s 02:33 ETA3*72 ETA4301126 ETAc 44% |***************| 132 MiB 1.11 MiB/s 02:25 ETAc 44% |***************| 132 MiB 1.09 MiB/s 02:27 ETA8 ETAc 44% |***************| 132 MiB 1.07 MiB/s 02:30 ETAc 44% |***************| 132 MiB 1.05 MiB/s - stalled -c 45% |***************| 134 MiB 1.05 MiB/s 02:31 ETA2 ETA7*9724 ETA842918 ETA50*81309 ETA2*5361 ETAc 52% |******************| 155 MiB 1.17 MiB/s 01:58 ETA69 ETAc 53% |******************| 158 MiB 1.17 MiB/s 01:55 ETA66 ETAc 54% |******************| 159 MiB 1.16 MiB/s 01:55 ETA6 ETAc 54% |******************| 159 MiB 1.15 MiB/s 01:56 ETA47 ETA60c 55% |*******************| 163 MiB 1.15 MiB/s 01:53 ETA44 ETA67649 ETA9*74200 ETA60*8234 ETAc 62% |*********************| 183 MiB 1.25 MiB/s 01:28 ETA49 ETA43c 64% |**********************| 189 MiB 1.26 MiB/s 01:22 ETA5920 ETAc 65% |**********************| 194 MiB 1.27 MiB/s 01:18 ETA69 ETA6*676 ETA9*2033009 ETAc 69% |************************| 205 MiB 1.31 MiB/s 01:08 ETA071924 ETA4*1860:55 ETA6*254049 ETAc 77% |**************************| 226 MiB 1.40 MiB/s 00:48 ETA39c 78% |***************************| 230 MiB 1.41 MiB/s 00:45 ETA392404 ETAc 80% |**************************** | 235 MiB 1.41 MiB/s 00:41 ETA0141337 ETA3*752 ETA6*54927 ETAc 86% |****************************** | 256 MiB 1.49 MiB/s 00:25 ETA86 ETAc 86% |****************************** | 256 MiB 1.47 MiB/s 00:26 ETA67874 ETA893 ETA606c 88% |****************************** | 261 MiB 1.46 MiB/s 00:22 ETA259*1 ETA34430 ETA5906219 ETA17039878615948 ETAc 91% |******************************* | 269 MiB 1.34 MiB/s 00:18 ETA3c 91% |******************************* | 270 MiB 1.33 MiB/s 00:18 ETA212*17 ETA02987265433c 93% |******************************** | 274 MiB 1.23 MiB/s 00:15 ETA5c 93% |******************************** | 276 MiB 1.23 MiB/s 00:14 ETA4723 ETA932 ETAc 95% |********************************* | 281 MiB 1.23 MiB/s 00:10 ETAc 95% |********************************* | 282 MiB 1.22 MiB/s 00:09 ETAc 95% |********************************* | 282 MiB 1.22 MiB/s 00:09 ETA110 ETAc 95% |********************************* | 282 MiB 1.21 MiB/s 00:10 ETA061909 ETAc 96% |********************************* | 283 MiB 1.19 MiB/s 00:09 ETA8c 96% |********************************* | 284 MiB 1.18 MiB/s 00:08 ETAc 96% |********************************* | 284 MiB 1.17 MiB/s 00:09 ETAc 96% |********************************* | 284 MiB 1.16 MiB/s 00:09 ETA58 ETAc 96% |********************************* | 285 MiB 1.15 MiB/s 00:07 ETA48 ETAc 96% |********************************* | 285 MiB 1.14 MiB/s 00:08 ETA3c 96% |********************************* | 285 MiB 1.13 MiB/s 00:08 ETAc 96% |********************************* | 285 MiB 1.12 MiB/s - stalled -c cd0a: error reading fsbn 411736 of 411736-411863 (cd0 bn 411736; cn 4117 tn 0 sn 96% |********************************* | 285 MiB 1.11 MiB/s - stalled -c 96% |********************************* | 285 MiB 1.10 MiB/s - stalled -c 96% |********************************* | 285 MiB 1.09 MiB/s - stalled -c 96% |********************************* | 285 MiB 1.08 MiB/s - stalled -c cd0a: error reading fsbn 411864 of 411864-411991 (cd0 bn 411864; cn 4118 tn 0 sn 96% |********************************* | 285 MiB 1.08 MiB/s - stalled -7c 96% |********************************* | 285 MiB 1.07 MiB/s - stalled -c 96% |********************************* | 285 MiB 1.07 MiB/s - stalled -6c 96% |********************************* | 285 MiB 1.06 MiB/s - stalled -5c cd0a: error reading fsbn 411096 of 411096-411111 (cd0 bn 411096; cn 4110 tn 0 sn gzip: failed to read stdin: Device busy 96% |********************************* | 285 MiB 1.05 MiB/s - stalled -tar: End of archive volume 1 reachedtar: Unexpected EOF on archive file 96% |********************************* | 285 MiB 1.05 MiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.11.30.16.00.48/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.11.30.16.00.48/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.11.30.16.00.48/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 21728 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11349.90 real 22.59 user 13.78 sys