This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.12.06.02.08.03/anita \ --structured-log-file=/bracket/i386/test/2017.12.06.02.08.03/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.12.06.02.08.03/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.12.06.02.08.03/anita/install_tmp.iso /bracket/i386/test/2017.12.06.02.08.03/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.12.06.02.08.03/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.12.06.02.08.03/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.12.06.02.08.03/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 27993 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15807184\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block149): /bracket/i386/test/2017.12.06.02.08.03/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block371): /bracket/i386/test/2017.12.06.02.08.03/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block576): /bracket/i386/test/2017.12.06.02.08.03/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.12change floppy0 /bracket/i386/test/2017.12.change floppy0 /bracket/i386/test/2017.12.0change floppy0 /bracket/i386/test/2017.12.06chan |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...ge floppy0 /bracket/i386/test/2017.12.06.change floppy0 /bracket/i386/test/2017.12.06.0change floppy0 /bracket/i386/test/2017.12.06.02change floppy0 /bracket/i386/test/2017.12.06.02.change floppy0 /bracket/i386/test/2017.12.06.02.0change floppy0 /bracket/i386/test/2017.12.06.02.08 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5766076-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2017.12.06.02.08.change floppy0 /bracket/i386/test/2017.12.06.02.08.0change floppy0 /bracket/i386/test/2017.12.06.02.08.03change floppy0 /bracket/i386/test/2017.12.06.02.08.03/change floppy0 /bracket/i386/test/2017.12. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+846756=0x1562794 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.8 (INSTALL) #0: Wed Dec 6 06:07:58 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.12.06.02.08.03-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.8/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 5 1s (213 >= 209) cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 2.8000 cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 1.78560 cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 46.63680 cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 10279 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 1 0s (2721 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too few runs of 1 1s (2315 <= 2315) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.8 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.8 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA58% |********************11584 KiB 7.57 M00:01 ETA87**********7536380 ETA100*****| 1993021 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA13% |****5440 KiB 3.08 M00:11 ETA6*7042****109442.960 ETA31*3056509 ETA8***5872808 ETA45**9136927 ETA54***2278476 ETA61***553665 ETA7**8032884 ETA73**305963 ETA8****4624952 ETA91**82723.021 ETA100****| 416100 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc3% |*| 4800 KiB 2.54 MiB/s 00:57 ETA11:08 ETAc3% |*| 6144 KiB 1.56 MiB/s 01:32 ETA4241 ETA6% |**104328316 ETAc8% |**| 13632 KiB 2.11 MiB/s 01:04 ETA1.7219 ETAc8% |**| 13632 KiB 1.60 MiB/s 01:25 ETA3144 ETA286 ETAc12% |****| 18816 KiB 1.53 MiB/s 01:25 ETA4630 ETAc12% |****| 18816 KiB 1.31 MiB/s 01:40 ETA264 ETA32105939 ETAc15% |*****| 23680 KiB 1.39 MiB/s 01:31 ETA288 ETAc16% |*****| 25408 KiB 1.34 MiB/s 01:33 ETA241 ETA6040 ETAc18% |******| 28928 KiB 1.28 MiB/s 01:34 ETA57 ETAc 19% |******| 30400 KiB 1.24 MiB/s 01:37 ETA09 ETA21*26435 ETA4*73763722 ETAc 25% |********| 39744 KiB 1.39 MiB/s 01:20 ETA52 ETAc 28% |*********| 43200 KiB 1.42 MiB/s 01:16 ETA369 ETAc 29% |**********| 44864 KiB 1.38 MiB/s 01:16 ETA120 ETA1 ETAc 30% |**********| 46528 KiB 1.28 MiB/s 01:21 ETAc 30% |**********| 46528 KiB 1.21 MiB/s 01:26 ETA3*50944718 ETA4286305 ETAc 35% |************| 55040 KiB 1.30 MiB/s 01:13 ETA71294 ETAc 35% |************| 55360 KiB 1.25 MiB/s 01:16 ETA6600c 37% |************| 58368 KiB 1.26 MiB/s 01:13 ETA8*939272 ETAc 39% |*************| 60224 KiB 1.24 MiB/s 01:13 ETA99252 ETA14 ETAc 40% |**************| 62656 KiB 1.23 MiB/s 01:12 ETA72004 ETAc 41% |**************| 63872 KiB 1.20 MiB/s 01:12 ETA4064184 ETAc 41% |**************| 64064 KiB 1.15 MiB/s 01:15 ETA46 ETA64027 ETA3*6244 ETA7*73664202 ETA50*731280:58 ETA2*80576314 ETAc 54% |******************| 83392 KiB 1.33 MiB/s 00:51 ETA12 ETAc 54% |******************| 83392 KiB 1.29 MiB/s 00:53 ETA74 ETAc 55% |*******************| 84736 KiB 1.26 MiB/s 00:53 ETA53734 ETA6943 ETA8*90432748 ETA917187 ETA63**81350 ETA7* 101 M4134 ETA70*6629 ETAc 72% |*************************| 109 MiB 1.47 MiB/s 00:27 ETA68 ETAc 74% |*************************| 112 MiB 1.48 MiB/s 00:25 ETA56 ETAc 75% |**************************| 113 MiB 1.46 MiB/s 00:25 ETA3644 ETA8*862 ETAc 80% |**************************** | 120 MiB 1.46 MiB/s 00:20 ETA5c 80% |**************************** | 120 MiB 1.43 MiB/s 00:20 ETA11 ETA120 ETA13119 ETAc 83% |***************************** | 126 MiB 1.43 MiB/s 00:16 ETA2475 ETA6*94 ETAc 87% |****************************** | 132 MiB 1.43 MiB/s 00:12 ETA8329*411 ETA9050 ETA609 ETA170c 92% |******************************** | 138 MiB 1.40 MiB/s 00:08 ETA397 ETA416 ETA4395*34 ETA9* | 149430 ETA25010100*398 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA97% |********************************* | 4096 KiB 2.22 M00:00 ETA100**| 419001 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 5696 KiB 3.12 MiB/s 01:32 ETA2.4955 ETA27808042:20 ETA3% |*99843500 ETAc3% |*| 11968 KiB 2.04 MiB/s 02:18 ETA1.8532 ETA569602.2404 ETAc7% |**| 23040 KiB 2.70 MiB/s 01:40 ETA7443953 ETA936269 ETAc8% |**| 25280 KiB 2.13 MiB/s 02:06 ETA7280113 ETA9% |***8800907 ETA103097686 ETA2897c11% |***| 35328 KiB 2.03 MiB/s 02:08 ETA9222% |****75681.9313 ETA63214 ETA8528821 ETA39232792 ETA4423048318 ETA467264 ETAc15% |*****| 47040 KiB 1.87 MiB/s 02:12 ETA806434 ETA683206 ETA50479c17% |*****| 51840 KiB 1.77 MiB/s 02:17 ETA122 ETA8*5744913 ETA988808308 ETA21*65216961:57 ETA3*72252.1145 ETA6*813443033 ETA9*83204425 ETAc30% |**********| 91328 KiB 2.43 MiB/s 01:24 ETA386 ETA1427294 ETAc31% |**********| 96512 KiB 2.38 MiB/s 01:24 ETA35 ETA3*964853 ETAc 33% |***********| 100 MiB 2.36 MiB/s 01:22 ETA4123 ETA5*312 ETA6640 ETA710817 ETA9*6462 ETA41*235407 ETAc 42% |**************| 126 MiB 2.55 MiB/s 01:05 ETA07 ETA4*3144 ETA6*690 ETA740630:58 ETA9*685 ETAc 51% |*****************| 150 MiB 2.71 MiB/s 00:52 ETA664 ETA253 ETA3*671 ETAc 53% |******************| 157 MiB 2.63 MiB/s 00:51 ETA12 ETAc 53% |******************| 158 MiB 2.57 MiB/s 00:52 ETA43 ETA6*656149 ETA8*7395 ETA60*9732 ETAc 62% |*********************| 184 MiB 2.77 MiB/s 00:39 ETA140 ETA50c 63% |**********************| 186 MiB 2.68 MiB/s 00:40 ETA76c 63% |**********************| 187 MiB 2.62 MiB/s 00:40 ETA591 ETA5c 64% |**********************| 189 MiB 2.54 MiB/s 00:41 ETA0c 65% |**********************| 192 MiB 2.51 MiB/s 00:40 ETA461 ETA377*2005137 ETAc 69% |************************| 203 MiB 2.53 MiB/s 00:35 ETA496 ETA55 ETAc 70% |************************| 207 MiB 2.47 MiB/s 00:35 ETA611183 ETAc 73% |*************************| 216 MiB 2.50 MiB/s 00:31 ETA474860 ETA5*22829 ETA76516 ETA8*3244 ETA9433 ETA80*6208482 ETA1974061 ETA224*7918 ETA9855077 ETA266 ETA6*45545 ETAc 87% |****************************** | 258 MiB 2.44 MiB/s 00:14 ETA93816001383 ETA279*5332402990572 ETA664217198643180089542701.99643112*88624217975333421 ETA5600 ETA6847709 ETA5* | 2808 ETA167 ETA5246336 ETA2140598575 ETA6c 97% |********************************* | 285 MiB 1.55 MiB/s 00:05 ETAc 97% |********************************* | 286 MiB 1.55 MiB/s 00:05 ETA 43c 97% |********************************* | 286 MiB 1.52 MiB/s 00:05 ETAc 97% |********************************* | 286 MiB 1.51 MiB/s 00:05 ETA70c cd0a: error reading fsbn 412012 of 412012-412139 (cd0 bn 412012; cn 4120 tn 0 sn 97% |********************************* | 287 MiB 1.50 MiB/s 00:05 ETA494 ETAc 97% |********************************* | 287 MiB 1.49 MiB/s 00:04 ETA8c 97% |********************************* | 288 MiB 1.47 MiB/s 00:04 ETA6c 97% |********************************* | 288 MiB 1.46 MiB/s 00:04 ETA5c cd0a: error reading fsbn 412140 of 412140-412267 (cd0 bn 412140; cn 4121 tn 0 sn 97% |********************************* | 288 MiB 1.44 MiB/s 00:04 ETA3c 97% |********************************* | 288 MiB 1.43 MiB/s 00:04 ETA2- stalled -c 97% |********************************* | 288 MiB 1.42 MiB/s - stalled -0c 97% |********************************* | 288 MiB 1.40 MiB/s - stalled -39c cd0a: error reading fsbn 412268 of 412268-412395 (cd0 bn 412268; cn 4122 tn 0 sn 97% |********************************* | 288 MiB 1.39 MiB/s - stalled -8c 97% |********************************* | 288 MiB 1.38 MiB/s - stalled -c 97% |********************************* | 288 MiB 1.36 MiB/s - stalled - c 97% |********************************* | 288 MiB 1.35 MiB/s - stalled -c cd0a: error reading fsbn 412396 of 412396-412523 (cd0 bn 412396; cn 4123 tn 0 sn 97% |********************************* | 288 MiB 1.34 MiB/s - stalled -c 97% |********************************* | 288 MiB 1.33 MiB/s - stalled -c 97% |********************************* | 288 MiB 1.31 MiB/s - stalled -c 97% |********************************* | 288 MiB 1.30 MiB/s - stalled -c cd0a: error reading fsbn 412524 of 412524-412651 (cd0 bn 412524; cn 4125 tn 0 sn 97% |********************************* | 288 MiB 1.29 MiB/s - stalled -c 97% |********************************* | 288 MiB 1.28 MiB/s - stalled -c 97% |********************************* | 288 MiB 1.27 MiB/s - stalled - c 97% |********************************* | 288 MiB 1.25 MiB/s - stalled - 43 00:04 ETAc 98% |********************************** | 288 MiB 1.22 MiB/s 00:04 ETA 98% |********************************** | 288 MiB 1.22 MiB/s 00:04 ETAc1c 98% |********************************** | 288 MiB 1.20 MiB/s 00:04 ETAc 98% |********************************** | 288 MiB 1.19 MiB/s - stalled -c cd0a: error reading fsbn 412028 of 412028-412043 (cd0 bn 412028; cn 4120 tn 0 sn gzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Unexpected EOF on archive file tar: Failed seek on file ./usr/share/man/man3/ppath_copydel_int64.3 (Invalid argument) 98% |********************************** | 288 MiB 1.19 MiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.12.06.02.08.03/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.12.06.02.08.03/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.12.06.02.08.03/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 27993 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11366.19 real 25.67 user 11.96 sys