This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2017.12.21.21.56.29/anita \ --structured-log-file=/bracket/i386/test/2017.12.21.21.56.29/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2017.12.21.21.56.29/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2017.12.21.21.56.29/anita/install_tmp.iso /bracket/i386/test/2017.12.21.21.56.29/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2017.12.21.21.56.29/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2017.12.21.21.56.29/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2017.12.21.21.56.29/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 2724 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-15777668\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block182): /bracket/i386/test/2017.12.21.21.56.29/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block315): /bracket/i386/test/2017.12.21.21.56.29/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block504): /bracket/i386/test/2017.12.21.21.56.29/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2017 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/test/2017.change floppy0 /bracket/i386/test/2017.1change floppy0 /bracket/i386/test/2017.12change floppy0 /bracket/i386/test/2017.12.change floppy0 /bracket/i386/test/2017.12.2change floppy0 /bracket/i386/test/2017.12.21chan |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...ge floppy0 /bracket/i386/test/2017.12.21.change floppy0 /bracket/i386/test/2017.12.21.2change floppy0 /bracket/i386/test/2017.12.21.21change floppy0 /bracket/i386/test/2017.12.21.21.change floppy0 /bracket/i386/test/2017.12.21.21.5change floppy0 /bracket/i386/test/2017.12.21.21.56 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+5766524-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2017.12.21.21.56.change floppy0 /bracket/i386/test/2017.12.21.21.56.2change floppy0 /bracket/i386/test/2017.12.21.21.56.29change floppy0 /bracket/i386/test/2017.12.21.21.56.29/change floppy0 /bracket/i386/test/2017.12. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+846308=0x155a794 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.9 (INSTALL) #0: Fri Dec 22 00:09:13 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.12.21.21.56.29-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 104 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga0 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga0 kbdmux 1 drm at vga0 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.9/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1654784 byte, 3200 inodes) Kernel RNG "kernel" monobit test FAILURE: 9725 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 28 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 3 1s (726 >= 723) cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 10279 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 1 0s (2695 >= 2685) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.9 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.9 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA50% |*****************9984 KiB 6.43 M00:01 ETA83************16707.320 ETA100******| 1990056 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA12% |****5248 KiB 2.97 M00:11 ETA3824484 ETA21***908862 ETA6**11200521 ETA33**3952480 ETA8**6128546***95205408 ETA53**2233697 ETA61***5408626 ETA6**7712595 ETA71*969634 ETA9***3296083 ETA85**5522 ETA91**820871 ETA7** | 405760 ETA100**| 4161045 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA3% |*6080 KiB 3.59 M00:40 ETA583846538 ETA9% |***15104.460 ETA13% |****213128726 ETAc14% |****| 22336 KiB 3.78 MiB/s 00:33 ETA496 ETAc17% |*****| 27520 KiB 3.59 MiB/s 00:34 ETA149 ETAc18% |******| 29056 KiB 3.01 MiB/s 00:40 ETA93122.705 ETAc19% |******| 30272 KiB 2.58 MiB/s 00:46 ETA5283650 ETAc20% |*******| 31744 KiB 2.31 MiB/s 00:51 ETA808126 ETAc20% |*******| 31808 KiB 2.01 MiB/s 00:59 ETA1.871:03 ETA1251225 ETAc22% |*******| 35008 KiB 1.85 MiB/s 01:02 ETA746 ETAc24% |********| 37120 KiB 1.77 MiB/s 01:04 ETA68 ETA59168715 ETAc29% |**********| 45504 KiB 1.89 MiB/s 00:56 ETA18 ETA307427 ETAc 31% |**********| 48576 KiB 1.78 MiB/s 00:57 ETA29 ETAc 33% |***********| 51776 KiB 1.78 MiB/s 00:56 ETA08 ETA43057 ETAc 35% |************| 55232 KiB 1.70 MiB/s 00:56 ETA668 ETAc 36% |************| 56768 KiB 1.65 MiB/s 00:57 ETA09 ETAc 37% |************| 57216 KiB 1.57 MiB/s 01:00 ETA81760:59 ETA8*600328 ETAc 40% |**************| 63104 KiB 1.60 MiB/s 00:55 ETA168557 ETAc 41% |**************| 63872 KiB 1.54 MiB/s 00:56 ETA248317 ETA57926 ETAc 46% |****************| 71040 KiB 1.59 MiB/s 00:50 ETA51 ETAc 47% |****************| 72512 KiB 1.55 MiB/s 00:51 ETA22 ETAc 47% |****************| 72512 KiB 1.49 MiB/s 00:53 ETA54 ETAc 48% |****************| 74304 KiB 1.46 MiB/s 00:53 ETA34 ETA9*616042 ETA52*80256948 ETA5*5184553 ETAc 58% |********************| 90112 KiB 1.61 MiB/s 00:38 ETA589 ETA6887c 60% |*********************| 93376 KiB 1.58 MiB/s 00:37 ETA6c 61% |*********************| 94720 KiB 1.55 MiB/s 00:37 ETA33*830464 ETAc 64% |**********************| 99520 KiB 1.55 MiB/s 00:34 ETA3c 67% |***********************| 101 MiB 1.57 MiB/s 00:30 ETA41 ETAc 68% |***********************| 102 MiB 1.54 MiB/s 00:30 ETA321c 69% |************************| 104 MiB 1.50 MiB/s 00:30 ETA49c 71% |************************| 108 MiB 1.51 MiB/s 00:28 ETA48c 72% |*************************| 109 MiB 1.49 MiB/s 00:27 ETA641186 ETAc 74% |*************************| 112 MiB 1.46 MiB/s 00:25 ETA5*34 ETAc 78% |***************************| 117 MiB 1.50 MiB/s 00:21 ETA48c 79% |***************************| 120 MiB 1.49 MiB/s 00:20 ETA80*1819 ETA7c 82% |**************************** | 124 MiB 1.48 MiB/s 00:17 ETA3*56 ETA4795 ETA6*30512 ETA8321 ETA1c 89% |******************************* | 135 MiB 1.51 MiB/s 00:10 ETA91608 ETA8c 93% |******************************** | 140 MiB 1.51 MiB/s 00:06 ETA15 ETA408** | 14851 ETA990 ETA503100*1 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4190 KiB 2.89 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc2% || 6272 KiB 3.71 MiB/s 01:17 ETA2.5752 ETAc3% |*| 9216 KiB 2.55 MiB/s 01:51 ETA002:22 ETA7921.7443 ETAc4% |*| 12928 KiB 1.97 MiB/s 02:22 ETA6550 ETA49767737 ETA7% |**215682.2203 ETAc8% |**| 24320 KiB 2.27 MiB/s 01:58 ETA052:12 ETAc8% |**| 25856 KiB 2.03 MiB/s 02:12 ETA1.8624 ETAc8% |**| 26880 KiB 1.82 MiB/s 02:27 ETA9% |***84789 ETA608036 ETAc10% |***| 31744 KiB 1.77 MiB/s 02:28 ETA2512133 ETA1347685 ETA2% |****67367428 ETA76929 ETAc13% |****| 39424 KiB 1.69 MiB/s 02:31 ETA410887128 ETA423046830 ETA39928 ETAc15% |*****| 47232 KiB 1.73 MiB/s 02:23 ETA806414 ETA6902667 ETAc 16% |*****| 49792 KiB 1.66 MiB/s 02:27 ETA51264230 ETA72672427 ETA9*86887713 ETA21*657929100 ETA3*71232.021:50 ETAc 24% |********| 73024 KiB 1.99 MiB/s 01:51 ETA63 ETA6*88482.0545 ETAc 27% |*********| 84288 KiB 2.14 MiB/s 01:38 ETA851840940 ETA69671 ETAc 29% |**********| 88704 KiB 2.08 MiB/s 01:39 ETA342 ETAc 30% |**********| 91904 KiB 2.06 MiB/s 01:39 ETA141 ETAc 30% |**********| 93248 KiB 2.00 MiB/s 01:41 ETA1561.953 ETA401634 ETAc 31% |**********| 95296 KiB 1.91 MiB/s 01:45 ETA680886 ETAc 32% |***********| 97152 KiB 1.87 MiB/s 01:46 ETA53657 ETAc 33% |***********| 98 MiB 1.86 MiB/s 01:45 ETA27 ETAc 33% |***********| 98 MiB 1.80 MiB/s 01:49 ETA7651 ETAc 33% |***********| 99 MiB 1.77 MiB/s 01:49 ETAc 33% |***********| 99 MiB 1.73 MiB/s 01:52 ETA13 ETAc 33% |***********| 99 MiB 1.67 MiB/s 01:56 ETA410184 ETA47 ETAc 34% |***********| 103 MiB 1.65 MiB/s 01:55 ETA5*18 ETAc 35% |************| 104 MiB 1.62 MiB/s 01:57 ETA508 ETA6616 ETAc 37% |************| 109 MiB 1.61 MiB/s 01:54 ETA05 ETAc 37% |************| 111 MiB 1.59 MiB/s 01:54 ETA85 ETA8*4601 ETA40*20644 ETA3*67237 ETA43280 ETA6*78226 ETAc 47% |****************| 139 MiB 1.82 MiB/s 01:24 ETA05 ETA84332 ETAc 50% |*****************| 147 MiB 1.85 MiB/s 01:19 ETA4c 50% |*****************| 149 MiB 1.82 MiB/s 01:19 ETA11507920 ETA2*38117 ETA3734 ETA46062 ETAc 56% |*******************| 167 MiB 1.91 MiB/s 01:06 ETA897 ETA770905 ETA60**760:59 ETAc 62% |*********************| 183 MiB 2.00 MiB/s 00:55 ETA1.98466 ETA4*92.012 ETAc 65% |**********************| 191 MiB 2.00 MiB/s 00:51 ETA1.987*82.0446 ETAc 68% |***********************| 203 MiB 2.05 MiB/s 00:44 ETA49*53 ETAc 70% |************************| 206 MiB 2.03 MiB/s 00:43 ETA1c 70% |************************| 208 MiB 2.00 MiB/s 00:43 ETA1.99c 72% |*************************| 212 MiB 2.01 MiB/s 00:40 ETA301.98492.0236 ETA6*2672 ETA9*331128 ETAc 80% |**************************** | 238 MiB 2.13 MiB/s 00:26 ETA124134 ETAc 83% |***************************** | 246 MiB 2.14 MiB/s 00:22 ETA2c 83% |***************************** | 247 MiB 2.12 MiB/s 00:22 ETA0491 ETA6*55418 ETA8956 ETA6045 ETA13229*0309c 89% |******************************* | 263 MiB 2.08 MiB/s 00:14 ETA47590546323 ETA171.9978615c 91% |******************************* | 268 MiB 1.94 MiB/s 00:13 ETA9210708982 ETA752*1310279765432351 ETA1600 ETA4909 ETA8 ETA5* | 281697 ETA6286 ETA374655 ETAc 97% |********************************* | 285 MiB 1.64 MiB/s 00:05 ETA624 ETA1759c 97% |********************************* | 287 MiB 1.58 MiB/s 00:04 ETAc 97% |********************************* | 288 MiB 1.56 MiB/s 00:04 ETA3 ETA548*39210c 98% |********************************** | 290 MiB 1.49 MiB/s 00:03 ETAc 98% |********************************** | 290 MiB 1.48 MiB/s 00:02 ETA76154c 99% |********************************** | 291 MiB 1.44 MiB/s 00:02 ETA231 ETAc 99% |********************************** | 292 MiB 1.43 MiB/s 00:01 ETA320 ETA100*| 2941 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 192 KiB 98.37 KiB/s 02:32 ETAc1% || 192 KiB 93.14 KiB/s 02:41 ETA48.45:10 ETAc1% || 192 KiB 47.39 KiB/s 05:17 ETA32.17:46 ETAc1% || 192 KiB 31.74 KiB/s 07:53 ETA24.10- stalled -ccd0a: error reading fsbn 530284 of 530284-530299 (cd0 bn 530284; cn 5302 tn 0 sn1% || 192 KiB 23.75 KiB/s - stalled -gzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Unexpected EOF on archive file 1% || 192 KiB 23.67 KiB/s - stalled -Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2017.12.21.21.56.29/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2017.12.21.21.56.29/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2017.12.21.21.56.29/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 2724 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11345.86 real 21.37 user 13.71 sys