This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.01.12.23.38.24/anita \ --structured-log-file=/bracket/i386/test/2018.01.12.23.38.24/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.01.12.23.38.24/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2018.01.12.23.38.24/anita/install_tmp.iso /bracket/i386/test/2018.01.12.23.38.24/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.01.12.23.38.24/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.01.12.23.38.24/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.01.12.23.38.24/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 6617 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-14482376\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block139): /bracket/i386/test/2018.01.12.23.38.24/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block378): /bracket/i386/test/2018.01.12.23.38.24/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block534): /bracket/i386/test/2018.01.12.23.38.24/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.01change floppy0 /bracket/i386/test/2018.01.change floppy0 /bracket/i386/test/2018.01.1change floppy0 /bracket/i386/test/2018.01.12chan /-\|/-\|/-\|/-\|/-\|/-\|/-\+5662972|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2018.01.12.change floppy0 /bracket/i386/test/2018.01.12.2change floppy0 /bracket/i386/test/2018.01.12.23change floppy0 /bracket/i386/test/2018.01.12.23.change floppy0 /bracket/i386/test/2018.01.12.23.3change floppy0 /bracket/i386/test/2018.01.12.23.38 -\|/-\|/-\|/-\|/-\|/-\|/-\|/+845636=0x1405074 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.12 (INSTALL) #0: Sat Jan 13 03:43:15 UTC 2018 root@babylon5.netbsd.org:/tmp/bracket/build/2018.01.12.23.38.24-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 105 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vend7 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: orking fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.12/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) Kernel RNG "kernel" runs test FAILURE: too few runs of 2 1s (1113 <= 1114) cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 6 0s (209 >= 209) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 27 0s found cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.12 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA26% |*********5184 KiB 2.70 M00:05 ETA87606256**********11264872 ETA61**2160296************ | 19203.180 ETA100**| 19915 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA15% |*****6656 KiB 3.81 M00:09 ETA20**864068 ETA34****142726 ETA40***7024353****225924.044 ETA6****668873 ETA72***30203.982 ETA84****5324.091 ETA9*** | 39616110 ETA100***| 419103.92 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA3% |*5696 KiB 3.25 M00:44 ETA47552411 ETA9% |***151044.3231 ETA12% |****90082c15% |*****| 23424 KiB 4.19 MiB/s 00:30 ETA3.447 ETA406209 ETAc17% |*****| 26496 KiB 3.01 MiB/s 00:41 ETA812.764 ETA7392548 ETAc19% |******| 29952 KiB 2.56 MiB/s 00:47 ETA3152 ETA20*30848253 ETAc21% |*******| 32896 KiB 2.19 MiB/s 00:53 ETA086 ETAc23% |********| 36480 KiB 2.16 MiB/s 00:52 ETA026 ETAc23% |********| 36736 KiB 1.94 MiB/s 00:58 ETA4769871:00 ETAc25% |********| 39488 KiB 1.89 MiB/s 00:59 ETA771:02 ETA6*4083291 ETA9*569680:55 ETA31825933 ETAc32% |***********| 49664 KiB 1.89 MiB/s 00:53 ETA35 ETA45382911 ETAc36% |************| 56000 KiB 1.91 MiB/s 00:49 ETA8551 ETAc 37% |************| 58304 KiB 1.87 MiB/s 00:49 ETA8*9392350 ETA7101 ETA961568770 ETA63251 ETA41*4640749 ETA2611288 ETAc 46% |****************| 72320 KiB 1.88 MiB/s 00:42 ETA33 ETAc 48% |****************| 74048 KiB 1.83 MiB/s 00:42 ETA783 ETA500650*763281 ETA2*810888239 ETA4409646 ETA7*921922 ETA60**9318460 ETAc 63% |**********************| 98176 KiB 2.02 MiB/s 00:26 ETA1.967 ETA4944c 68% |***********************| 102 MiB 2.03 MiB/s 00:23 ETA309*41.98c 72% |*************************| 108 MiB 2.03 MiB/s 00:20 ETA1.9897c 76% |**************************| 115 MiB 2.04 MiB/s 00:17 ETA1.998c 77% |**************************| 116 MiB 1.96 MiB/s 00:17 ETA74c 79% |***************************| 120 MiB 1.95 MiB/s 00:15 ETA280*111204 ETA3*512 ETA476*3030 ETA83408 ETA29*590617 ETA2*86 ETAc 93% |******************************** | 140 MiB 1.90 MiB/s 00:05 ETA1894 ETA47269** | 149920 ETA18765032100*078 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4210 KiB 2.40 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 4032 KiB 2.01 MiB/s 02:24 ETA1.931 ETA279362.0817 ETAc3% |*| 10368 KiB 2.36 MiB/s 02:00 ETA1.741 ETAc3% |*| 10368 KiB 1.61 MiB/s 02:56 ETA33:35 ETAc3% |*| 11392 KiB 1.34 MiB/s 03:31 ETA425442643 ETAc4% |*| 12544 KiB 1.18 MiB/s 03:58 ETA044:29 ETA800138 ETA57792293:34 ETAc6% |**| 19264 KiB 1.29 MiB/s 03:32 ETA147 ETAc6% |**| 20928 KiB 1.23 MiB/s 03:41 ETA1655 ETAc6% |**| 20928 KiB 1.10 MiB/s 04:08 ETA0326 ETA7163250 ETAc8% |**| 25280 KiB 1.12 MiB/s 04:00 ETA311c 8% |**| 25536 KiB 1.03 MiB/s 04:20 ETA60019 ETAc 8% |**| 25728 KiB 988.40 KiB/s 04:39 ETA6.1340 ETA9% |***7200 KiB 974.142 ETA648 KiB 981.4839 ETA93120.318 ETA46 KiB 971.0640 ETAc 10% |***| 31232 KiB 980.14 KiB/s 04:36 ETA680 KiB 978.53c 10% |***| 31680 KiB 940.45 KiB/s 04:47 ETA20.5853 ETAc 10% |***| 31680 KiB 884.27 KiB/s 05:05 ETA74.09 ETAc 10% |***| 32448 KiB 849.88 KiB/s 05:17 ETA640 KiB 851.566 ETAc 11% |***| 35136 KiB 882.36 KiB/s 05:02 ETA50.1413 ETA904 KiB 862.0908 ETA2% |****7632 KiB 886.134:58 ETA8594.567 ETAc 13% |****| 40320 KiB 907.31 KiB/s 04:48 ETA42688 KiB 937.5636 ETA4224 KiB 950.031 ETAc 15% |*****| 46016 KiB 968.13 KiB/s 04:24 ETA8064 KiB 989.1516 ETAc 15% |*****| 48064 KiB 970.36 KiB/s 04:21 ETA52.66 ETAc 16% |*****| 48576 KiB 940.24 KiB/s 04:29 ETA50240 KiB 957.982 ETA432 KiB 940.397 ETAc 17% |*****| 53248 KiB 978.56 KiB/s 04:14 ETA55.7120 ETAc 17% |*****| 53248 KiB 944.67 KiB/s 04:23 ETA21.629 ETAc 18% |******| 54848 KiB 943.14 KiB/s 04:22 ETAc 18% |****** | 55552 KiB 926.60 KiB/s 04:25 ETA 3.276 ETAc 18% |****** | 55552 KiB 896.55 KiB/s 04:34 ETA 3.565 ETA70.3043 ETA97792 KiB 900.1831 ETA22*68928 KiB 1.02 M3:42 ETA4*73536825 ETA7*8281192:58 ETAc 27% |*********| 84224 KiB 1.19 MiB/s 02:57 ETAc 27% |********* | 84224 KiB 1.18 MiB/s 02:59 ETA 63:02 ETA54 ETA9*9728212:51 ETA3196256836 ETAc 32% |***********| 98112 KiB 1.28 MiB/s 02:34 ETA62475 ETA3 99 M3029 ETAc 34% |***********| 101 MiB 1.30 MiB/s 02:28 ETA299 ETAc 36% |************| 106 MiB 1.33 MiB/s 02:20 ETA721 ETAc 36% |************ | 107 MiB 1.31 MiB/s 02:22 ETA 294 ETAc 36% |************ | 107 MiB 1.28 MiB/s 02:25 ETA 68 ETAc 36% |************ | 107 MiB 1.25 MiB/s 02:29 ETA 3- stalled -c cd0a: error reading fsbn 294540 of 294540-294667 (cd0 bn 294540; cn 2945 tn 0 sn 36% |************| 107 MiB 1.22 MiB/s - stalled -08 02:34 ETAc 38% |*************| 112 MiB 1.24 MiB/s 02:26 ETA28 ETAc 38% |*************| 114 MiB 1.23 MiB/s 02:25 ETA27 ETAc 38% |*************| 114 MiB 1.21 MiB/s 02:29 ETA1930 ETAc 39% |*************| 116 MiB 1.20 MiB/s 02:28 ETA199 ETAc 39% |*************| 116 MiB 1.18 MiB/s 02:30 ETA40*828 ETAc 40% |**************| 118 MiB 1.18 MiB/s 02:29 ETA978 ETAc 40% |**************| 119 MiB 1.16 MiB/s 02:29 ETA531 ETAc 40% |**************| 119 MiB 1.14 MiB/s 02:32 ETA34 ETA25 ETA225625 ETA3*880 ETA5322113 ETAc 45% |***************| 135 MiB 1.22 MiB/s 02:10 ETA1c 45% |***************| 135 MiB 1.20 MiB/s 02:12 ETA193 ETA7*92108 ETA84233 ETAc 49% |*****************| 146 MiB 1.25 MiB/s 01:57 ETA8 ETAc 49% |*****************| 146 MiB 1.23 MiB/s 01:59 ETA22:00 ETA5081:59 ETA15144 ETAc 51% |*****************| 152 MiB 1.24 MiB/s 01:55 ETA33 ETA3*6549 ETAc 53% |******************| 158 MiB 1.26 MiB/s 01:47 ETA58 ETAc 54% |******************| 159 MiB 1.25 MiB/s 01:47 ETA48 ETAc 54% |******************| 159 MiB 1.23 MiB/s 01:49 ETA250 ETA62347 ETAc 56% |*******************| 167 MiB 1.26 MiB/s 01:40 ETA51 ETA780 ETA8*72736 ETA9691 ETA61*803127 ETA2323 ETA4*8518 ETAc 65% |**********************| 194 MiB 1.38 MiB/s 01:13 ETA66*572 ETA7200907 ETA9*4413 ETAc 69% |************************| 205 MiB 1.40 MiB/s 01:03 ETAc 70% |************************| 207 MiB 1.39 MiB/s 01:02 ETAc 72% |*************************| 213 MiB 1.42 MiB/s 00:56 ETA4c 72% |*************************| 214 MiB 1.41 MiB/s 00:56 ETA07 ETA39356 ETAc 74% |*************************| 220 MiB 1.41 MiB/s 00:52 ETA05*310 ETA8*30544 ETA80*6739 ETA1986 ETA24295 ETA3*6512 ETA6*54526 ETA7863 ETA8602 ETA11 ETA520 ETA9*344319 ETA905268 ETA10497887615947 ETA32701039182*76 ETA7 ETA65246 ETA3321345 ETA54 ETA603 ETA748292 ETA9301 ETA5* | 28029c 95% |********************************* | 281 MiB 1.29 MiB/s 00:10 ETA209 ETA638 ETA4877 ETA565766 ETA47325 ETA1808* | 289194 ETA8790653 ETA4312922 ETA11 ETA304090 ETA100* Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA39% |*************5952 KiB 3.52 M00:02 ETA50****761627c62% |*********************| 9536 KiB 2.52 MiB/s 00:02 ETA18c62% |*********************| 9536 KiB 1.62 MiB/s 00:03 ETA46c62% |*********************| 9536 KiB 1.20 MiB/s 00:04 ETA12c62% |*********************| 9536 KiB 987.42 KiB/s - stalled -3*600 KiB 925.81 00:06 ETAc76% |**************************| 11648 KiB 999.09 KiB/s 00:03 ETA43.25c76% |**************************| 11648 KiB 862.13 KiB/s 00:04 ETA03.2483***2672 KiB 819.503 ETA100******| 15220 KiB 922.950 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 192 KiB 97.34 KiB/s 05:46 ETAc0% || 192 KiB 93.34 KiB/s 06:01 ETA48.3111:38 ETAc0% || 192 KiB 47.39 KiB/s 11:52 ETA32.187:28 ETAc0% || 192 KiB 31.67 KiB/s 17:45 ETA24.16- stalled -ccd0a: error reading fsbn 581052 of 581052-581067 (cd0 bn 581052; cn 5810 tn 0 sngzip: failed to read stdin: Device busy 0% || 192 KiB 23.79 KiB/s - stalled -tar: End of archive volume 1 reached tar: Unexpected EOF on archive file 0% || 192 KiB 23.74 KiB/s - stalled -Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/tests.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.01.12.23.38.24/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.01.12.23.38.24/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.01.12.23.38.24/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 6617 child_fd: 11 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11391.67 real 25.69 user 12.13 sys