This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.01.22.08.14.09/anita \ --structured-log-file=/bracket/i386/test/2018.01.22.08.14.09/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.01.22.08.14.09/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2018.01.22.08.14.09/anita/install_tmp.iso /bracket/i386/test/2018.01.22.08.14.09/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.01.22.08.14.09/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.01.22.08.14.09/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.01.22.08.14.09/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 21805 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-14517532\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block177): /bracket/i386/test/2018.01.22.08.14.09/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block304): /bracket/i386/test/2018.01.22.08.14.09/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block525): /bracket/i386/test/2018.01.22.08.14.09/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.01change floppy0 /bracket/i386/test/2018.01.change floppy0 /bracket/i386/test/2018.01.2change floppy0 /bracket/i386/test/2018.01.22chan |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...ge floppy0 /bracket/i386/test/2018.01.22.change floppy0 /bracket/i386/test/2018.01.22.0change floppy0 /bracket/i386/test/2018.01.22.08change floppy0 /bracket/i386/test/2018.01.22.08.change floppy0 /bracket/i386/test/2018.01.22.08.1change floppy0 /bracket/i386/test/2018.01.22.08.14 /-\|/-\|/-\|/-\|/-\|/-\|/-\+5662972|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2018.01.22.08.14.change floppy0 /bracket/i386/test/2018.01.22.08.14.0change floppy0 /bracket/i386/test/2018.01.22.08.14.09change floppy0 /bracket/i386/test/2018.01.22.08.14.09/change floppy0 /bracket/i386/test/2018.01. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-+845636=0x140e074 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.12 (INSTALL) #0: Mon Jan 22 11:08:02 UTC 2018 root@babylon5.netbsd.org:/tmp/bracket/build/2018.01.22.08.14.09-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 105 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.12/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) Kernel RNG "kernel" long run test FAILURE: Run of 27 0s found cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.12 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA61% |*********************12288 KiB 7.58 M00:00 ETA92*********** | 184968.03100***| 199401 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA16% |*****7104 KiB 3.48 M00:09 ETA768533******1388587 ETA5*4844650*****21184715 ETA7**393604 ETA6****8160643 ETA74**310432 ETA86*****6224751 ETA95*** | 4019230 ETA100**| 419305746 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA4% |*7552 KiB 4.94 M00:28 ETA7% |**1132882c8% |**| 12992 KiB 3.35 MiB/s 00:41 ETA005 ETAc8% |**| 12992 KiB 2.20 MiB/s 01:02 ETA028 ETA11% |***715240:59 ETAc13% |****| 21184 KiB 2.46 MiB/s 00:52 ETA31211:00 ETAc13% |****| 21312 KiB 2.00 MiB/s 01:04 ETA1.7912 ETA476025 ETAc16% |*****| 24704 KiB 1.78 MiB/s 01:10 ETA666 ETAc17% |*****| 26688 KiB 1.68 MiB/s 01:13 ETA578 ETAc17% |*****| 27328 KiB 1.53 MiB/s 01:20 ETA5946 ETAc17% |*****| 27359 KiB 1.37 MiB/s 01:30 ETA8*84023 ETA8801c19% |******| 30400 KiB 1.31 MiB/s 01:32 ETA2265 ETAc 19% |******| 30402 KiB 1.20 MiB/s 01:40 ETA20*123c 21% |*******| 32832 KiB 1.20 MiB/s 01:38 ETA961641 ETAc 23% |********| 35840 KiB 1.23 MiB/s 01:33 ETA68014 ETA992186 ETAc 24% |********| 38336 KiB 1.18 MiB/s 01:35 ETA57 ETAc 24% |********| 38336 KiB 1.11 MiB/s 01:41 ETA084 ETAc 25% |********| 39936 KiB 1.09 MiB/s 01:41 ETA74 ETAc 25% |********| 39936 KiB 1.03 MiB/s 01:47 ETA19 ETAc 25% |********| 39936 KiB 0.98 MiB/s 01:53 ETA987.33 K5 ETAc 28% |*********| 43328 KiB 1.02 MiB/s 01:46 ETA0.999 ETAc 28% |*********| 43328 KiB 997.42 KiB/s 01:51 ETA72.344 ETAc 28% |*********| 43328 KiB 954.13 KiB/s 01:56 ETA30.95- stalled -9*5312 KiB 956.79 01:53 ETAc 30% |**********| 46720 KiB 960.66 KiB/s 01:51 ETA46.23 ETAc 30% |**********| 46720 KiB 922.70 KiB/s 01:56 ETA09.468 ETAc 30% |**********| 46720 KiB 890.39 KiB/s 02:00 ETA7232 KiB 882.951 ETAc 31% |**********| 48576 KiB 893.61 KiB/s 01:58 ETAc 32% |***********| 49664 KiB 892.10 KiB/s 01:57 ETA9887.1750432 KiB 875.658 ETAc 34% |***********| 53568 KiB 918.37 KiB/s 01:49 ETA897.7052 ETAc 34% |***********| 53568 KiB 888.02 KiB/s 01:53 ETA70.545 ETAc 35% |************| 55296 KiB 885.10 KiB/s 01:51 ETA70.333 ETAc 35% |************| 55296 KiB 857.50 KiB/s 01:55 ETA43.757 ETAc 35% |************| 55296 KiB 832.19 KiB/s 01:58 ETA19.62:00 ETA78368 KiB 853.451:52 ETAc 40% |**************| 62336 KiB 897.68 KiB/s 01:42 ETA31685.221 ETAc 40% |**************| 63168 KiB 884.18 KiB/s 01:43 ETA70.414 ETAc 40% |**************| 63168 KiB 860.21 KiB/s 01:45 ETA48.077 ETA18725.586 ETAc 42% |**************| 65792 KiB 860.19 KiB/s 01:42 ETA45.814 ETA1.055 ETAc 43% |***************| 67648 KiB 847.85 KiB/s 01:42 ETA3.20c 43% |***************| 67648 KiB 827.33 KiB/s 01:44 ETA2.495 ETAc 44% |***************| 69312 KiB 827.52 KiB/s 01:42 ETA2.813 ETAc 44% |***************| 69312 KiB 808.78 KiB/s 01:45 ETA3.15c 46% |****************| 71232 KiB 812.37 KiB/s 01:42 ETA06.393 ETAc 46% |****************| 71232 KiB 794.25 KiB/s 01:44 ETA88.625 ETAc 46% |****************| 71232 KiB 777.59 KiB/s 01:46 ETA0.867 ETAc 48% |****************| 74304 KiB 794.21 KiB/s 01:40 ETA86.721 ETA9*5840 KiB 794.1838 ETA508592 KiB 815.72 ETA3*82240 KiB 843.3225 ETA5*5056 KiB 864.300 ETA8*90496 KiB 910.5110 ETA61*4464 KiB 941.003 ETA4* 97 MiB 989.70:54 ETA7*101 MiB 0.99 M49 ETAc 69% |************************| 104 MiB 1.01 MiB/s 00:45 ETA70504 ETA6c 71% |************************| 107 MiB 1.00 MiB/s 00:43 ETA0.99c 72% |*************************| 108 MiB 1.00 MiB/s 00:41 ETA0.992 ETAc 74% |*************************| 112 MiB 1.01 MiB/s 00:38 ETA05*316 ETAc 77% |**************************| 116 MiB 1.02 MiB/s 00:32 ETA13 ETA8*722 ETAc 80% |**************************** | 121 MiB 1.04 MiB/s 00:27 ETA38 ETA127 ETAc 83% |***************************** | 125 MiB 1.04 MiB/s 00:24 ETA5860 ETA6*919 ETA83386 ETA5 ETA9*44 ETA9053 ETA172 ETAc 92% |******************************** | 138 MiB 1.08 MiB/s 00:10 ETA341908 ETA489** | 149130 ETA502100*1 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA98% |********************************** | 4160 KiB 2.21 M00:00 ETA100*| 4211.9 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc2% || 6272 KiB 3.87 MiB/s 01:14 ETA2.5055 ETA8320342:02 ETAc3% |*| 9472 KiB 2.06 MiB/s 02:18 ETA6001.7047 ETAc4% |*| 14720 KiB 2.26 MiB/s 02:03 ETA1.8729 ETAc5% |*| 16192 KiB 1.90 MiB/s 02:26 ETA6351 ETA8303 ETA7% |**236802.0214 ETAc8% |**| 24640 KiB 1.92 MiB/s 02:20 ETA5408846 ETA9% |***84809218 ETA1030336124487 ETA143626 ETA2% |****63524 ETA7888886 ETA85249 ETAc13% |****| 39616 KiB 1.79 MiB/s 02:22 ETA41858119 ETA425607722 ETA4153 ETA5% |*****56324c15% |*****| 47296 KiB 1.75 MiB/s 02:22 ETA812805 ETA69216686 ETA751840712 ETAc17% |*****| 54080 KiB 1.73 MiB/s 02:19 ETA6624 ETAc18% |******| 55808 KiB 1.68 MiB/s 02:22 ETA28 ETAc 19% |******| 57600 KiB 1.63 MiB/s 02:25 ETA5731 ETAc 19% |******| 58496 KiB 1.57 MiB/s 02:30 ETA939234 ETA58416 ETA21*65280623 ETA3*9696814 ETAc 23% |********| 72384 KiB 1.69 MiB/s 02:12 ETA64 ETAc 24% |********| 74048 KiB 1.65 MiB/s 02:14 ETA26 ETA5795270 ETA7*832647402 ETAc 28% |*********| 84864 KiB 1.74 MiB/s 02:01 ETA04 ETA9*819241:59 ETAc 29% |**********| 89856 KiB 1.73 MiB/s 01:59 ETA02:01 ETA309248011:59 ETAc 30% |**********| 93568 KiB 1.70 MiB/s 01:59 ETA672:01 ETAc 31% |********** | 96064 KiB 1.69 MiB/s 01:58 ETA 2*73479 ETA47252:00 ETAc 33% |***********| 98 MiB 1.68 MiB/s 01:56 ETA58 ETAc 33% |***********| 98 MiB 1.63 MiB/s 01:59 ETA10024247 ETAc 35% |************| 103 MiB 1.62 MiB/s 01:57 ETA18 ETAc 36% |************| 107 MiB 1.63 MiB/s 01:55 ETA06 ETAc 36% |************| 108 MiB 1.61 MiB/s 01:55 ETA587 ETA7106 ETA9*66547 ETAc 41% |**************| 122 MiB 1.70 MiB/s 01:41 ETA673 ETA381 ETA3*97335 ETA534829 ETA7*9825 ETAc 47% |****************| 141 MiB 1.81 MiB/s 01:24 ETA05 ETA9*531 ETA5050717 ETAc 52% |******************| 155 MiB 1.91 MiB/s 01:12 ETA6883 ETA74 ETAc 53% |******************| 159 MiB 1.86 MiB/s 01:12 ETA53 ETA46142 ETAc 55% |*******************| 164 MiB 1.86 MiB/s 01:10 ETA41 ETA6609 ETA8*73903 ETAc 59% |********************| 175 MiB 1.89 MiB/s 01:03 ETA861*80910:59 ETAc 62% |*********************| 184 MiB 1.94 MiB/s 00:56 ETA27 ETA504*9043 ETA6*7949 ETA82002.006 ETAc 68% |***********************| 203 MiB 2.01 MiB/s 00:45 ETA1.986 ETA9*594 ETA71122.040 ETA4*8836 ETAc 74% |*************************| 220 MiB 2.07 MiB/s 00:36 ETA66*483 ETA79101 ETAc 79% |***************************| 235 MiB 2.13 MiB/s 00:27 ETA280*76 ETAc 80% |**************************** | 238 MiB 2.11 MiB/s 00:26 ETA09242105 ETA3*732 ETA552619 ETA7*896 ETA8986075 ETA154c 88% |****************************** | 262 MiB 2.12 MiB/s 00:15 ETA9*130087464 ETA5539026101.9977654281898173 ETA9654327010787615432*210692876534321c 93% |******************************** | 274 MiB 1.61 MiB/s 00:12 ETA5c 93% |******************************** | 276 MiB 1.59 MiB/s 00:11 ETAc 93% |******************************** | 277 MiB 1.58 MiB/s 00:11 ETA46909 ETA5* | 2805c 95% |********************************* | 281 MiB 1.54 MiB/s 00:08 ETA337 ETA61406 ETA5497685 ETA76754834 ETA2198*0393 ETA890765142 ETA32921 ETA31400 ETA100*| 295 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAccd0a: error reading fsbn 530168 of 530168-530183 (cd0 bn 530168; cn 5301 tn 0 sngzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0% || 00.00 KiB/s --:-- ETACommand failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.01.22.08.14.09/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.01.22.08.14.09/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.01.22.08.14.09/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 21805 child_fd: 11 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11402.57 real 27.53 user 13.30 sys