This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.01.28.13.37.39/anita \ --structured-log-file=/bracket/i386/test/2018.01.28.13.37.39/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.01.28.13.37.39/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2018.01.28.13.37.39/anita/install_tmp.iso /bracket/i386/test/2018.01.28.13.37.39/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.01.28.13.37.39/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.01.28.13.37.39/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.01.28.13.37.39/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 11725 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 0 seconds. |/-14524188\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block134): /bracket/i386/test/2018.01.28.13.37.39/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block340): /bracket/i386/test/2018.01.28.13.37.39/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block534): /bracket/i386/test/2018.01.28.13.37.39/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.01change floppy0 /bracket/i386/test/2018.01.change floppy0 /bracket/i386/test/2018.01.2change floppy0 /bracket/i386/test/2018.01.28chan /-\|/-\|/-\|/-\|/-\|/-\|/-\+5662972|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2018.01.28.change floppy0 /bracket/i386/test/2018.01.28.1change floppy0 /bracket/i386/test/2018.01.28.13change floppy0 /bracket/i386/test/2018.01.28.13.change floppy0 /bracket/i386/test/2018.01.28.13.3change floppy0 /bracket/i386/test/2018.01.28.13.37change floppy0 /bracket/i386/test/2018.01.28.13.37.change floppy0 /bracket/i386/test/2018.01.28.13.37.3change floppy0 /bracket/i386/test/2018.01.28.13.37.39change floppy0 /bracket/i386/test/2018.01.28.13.37.39/change floppy0 /bracket/i386/test/2018.01. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-+845700=0x140f0b4 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.12 (INSTALL) #0: Sun Jan 28 15:34:39 UTC 2018 root@babylon5.netbsd.org:/tmp/bracket/build/2018.01.28.13.37.39-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 105 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: venendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.12/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 2 0s (1388 >= 1386) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 29 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 9698 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 28 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 1.99680 cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 10276 ones cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.12 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA57% |*******************11520 KiB 7.33 M00:01 ETA92************* | 18496840 ETA100***| 199503 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA15% |*****6720 KiB 4.10 M00:08 ETA21**90243.8130***1267254*43361543****8432277 ETA50**2112016 ETA7**4128155 ETA66****803224 ETA72**30464143 ETA80***37282 ETA7**691 ETA94** | 3974400 ETA100***| 42020032.98 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA3% |*5952 KiB 3.65 M00:39 ETAc5% |*| 7872 KiB 3.24 MiB/s 00:44 ETA838421:03 ETA6% |**1004871 ETA9% |***4272580:52 ETAc12% |****| 19200 KiB 2.93 MiB/s 00:44 ETA9685651 ETA320224355 ETAc13% |****| 21312 KiB 2.16 MiB/s 00:59 ETA001:04 ETAc13% |****| 21312 KiB 1.79 MiB/s 01:12 ETA677 ETAc14% |****| 22912 KiB 1.65 MiB/s 01:17 ETA5422 ETAc14% |****| 22912 KiB 1.43 MiB/s 01:29 ETA3534 ETAc15% |*****| 24320 KiB 1.35 MiB/s 01:33 ETA83288 ETAc15% |*****| 24383 KiB 1.21 MiB/s 01:44 ETA169 ETAc16% |*****| 24704 KiB 1.12 MiB/s 01:52 ETA068 ETAc 17% |*****| 26880 KiB 1.12 MiB/s 01:50 ETA944066 ETA72657 ETAc 19% |******| 30208 KiB 1.10 MiB/s 01:49 ETA0653 ETA46 ETAc 19% |******| 30208 KiB 0.99 MiB/s 02:01 ETA995.11 K4 ETAc 20% |*******| 31360 KiB 991.56 KiB/s 02:03 ETA67.987 ETAc 21% |*******| 32896 KiB 980.27 KiB/s 02:03 ETA55.767 ETAc 23% |********| 36416 KiB 1.00 MiB/s 01:54 ETA80 KiB 995.08 K8 ETAc 24% |********| 37888 KiB 0.99 MiB/s 01:54 ETA8016 KiB 982.55 K8 ETAc 24% |********| 38016 KiB 967.04 KiB/s 02:00 ETA34.004 ETA208 KiB 926.535 ETAc 25% |********| 39616 KiB 927.26 KiB/s 02:03 ETA155 ETAc 27% |*********| 43072 KiB 966.94 KiB/s 01:55 ETA47.157 ETAc 27% |*********| 43072 KiB 925.56 KiB/s 02:00 ETA07.042 ETAc 29% |**********| 45312 KiB 936.14 KiB/s 01:56 ETA3065288.684 ETAc 30% |**********| 47296 KiB 937.67 KiB/s 01:54 ETA180000.43c 31% |**********| 48000 KiB 916.22 KiB/s 01:56 ETA898.718 ETAc 32% |***********| 49856 KiB 913.74 KiB/s 01:54 ETA899.236 ETAc 32% |***********| 49856 KiB 881.26 KiB/s 01:58 ETA68.92:00 ETA351648 KiB 882.031:56 ETAc 34% |***********| 52864 KiB 888.69 KiB/s 01:54 ETA73.276 ETAc 34% |***********| 52864 KiB 860.33 KiB/s 01:57 ETA45.469 ETAc 37% |************| 57472 KiB 907.54 KiB/s 01:46 ETA728 KiB 892.268 ETAc 37% |************| 57728 KiB 883.79 KiB/s 01:49 ETA67.1851 ETAc 37% |************| 57728 KiB 856.37 KiB/s 01:52 ETA41.264 ETAc 38% |*************| 59392 KiB 856.15 KiB/s 01:50 ETA40.632 ETAc 38% |*************| 59392 KiB 832.26 KiB/s 01:54 ETA17.596 ETA960608 KiB 826.303 ETA41*4704 KiB 869.6343 ETA4*8288 KiB 906.9434 ETAc 48% |****************| 75520 KiB 987.38 KiB/s 01:19 ETA74.0020 ETAc 48% |****************| 75520 KiB 962.21 KiB/s 01:21 ETA49.732 ETAc 48% |****************| 75520 KiB 936.96 KiB/s 01:24 ETA27.70c 48% |****************| 75520 KiB 914.10 KiB/s - stalled -05.44c cd0a: error reading fsbn 182948 of 182948-183075 (cd0 bn 182948; cn 1829 tn 0 sn 48% |****************| 75520 KiB 892.75 KiB/s - stalled -83.919*968 KiB 877.60 01:29 ETAc 49% |*****************| 77120 KiB 881.48 KiB/s 01:27 ETA71.028 ETAc 49% |*****************| 77120 KiB 861.67 KiB/s 01:29 ETA51.8630 ETAc 51% |*****************| 79104 KiB 865.53 KiB/s 01:26 ETA54.218 ETA2*80832 KiB 866.194 ETA5*5056 KiB 899.9616 ETA8*9728 KiB 941.5408 ETAc 59% |********************| 92096 KiB 952.19 KiB/s 01:05 ETA46.51c 60% |*********************| 93696 KiB 949.38 KiB/s 01:03 ETA3.454 ETAc 60% |*********************| 93696 KiB 930.42 KiB/s 01:05 ETA24.91c 60% |*********************| 93696 KiB 909.36 KiB/s 01:06 ETA8.313*75329.841 ETA49200 KiB 943.50:58 ETA9** 104 MiB 0.98 M46 ETAc 72% |*************************| 109 MiB 1.01 MiB/s 00:41 ETA3100 ETA039 ETAc 74% |*************************| 111 MiB 1.00 MiB/s 00:38 ETAc 74% |*************************| 111 MiB 0.98 MiB/s 00:39 ETAc 75% |**************************| 113 MiB 0.98 MiB/s 00:38 ETAc 75% |**************************| 113 MiB 993.02 KiB/s 00:38 ETA86.78c 76% |**************************| 114 MiB 989.40 KiB/s 00:37 ETA2.89c 76% |**************************| 114 MiB 973.12 KiB/s 00:37 ETA67.058 ETA8*8 MiB 989.203 ETAc 80% |**************************** | 121 MiB 0.98 MiB/s 00:29 ETA996.88 K30 ETAc 80% |**************************** | 121 MiB 989.25 KiB/s 00:30 ETA1.12c 80% |**************************** | 121 MiB 973.81 KiB/s 00:30 ETA65.78- stalled -c 81% |**************************** | 122 MiB 967.31 KiB/s 00:29 ETA23 MiB 971.268 ETAc 82% |**************************** | 123 MiB 964.84 KiB/s 00:28 ETA56.76c 82% |**************************** | 123 MiB 950.74 KiB/s 00:28 ETA43.039 ETA3*6 MiB 955.65 ETA59 MiB 970.192 ETAc 88% |****************************** | 132 MiB 989.15 KiB/s 00:18 ETA36.997 ETAc 89% |******************************* | 134 MiB 984.60 KiB/s 00:17 ETA77.95c 89% |******************************* | 134 MiB 970.83 KiB/s 00:17 ETA64.15c 89% |******************************* | 135 MiB 964.43 KiB/s 00:16 ETA9068.444 ETAc 91% |******************************* | 138 MiB 972.07 KiB/s 00:13 ETA 64.8159.682*9 MiB 964.711 ETA341909 ETA46.34c 97% |********************************* | 147 MiB 995.56 KiB/s 00:03 ETA8*1.4399 MiB 0.97 M0 ETA50 MiB 996.22 K1.6484.77100*79.548.43 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4210 KiB 2.37 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 1664 KiB 858.06 KiB/s 05:50 ETA00.346:15 ETAc0% || 1664 KiB 423.37 KiB/s 11:49 ETA06.352:19 ETAc0% || 1664 KiB 281.55 KiB/s 17:47 ETAc0% || 1664 KiB 272.32 KiB/s 18:23 ETA10.06- stalled -05.893% |*9088 KiB 946.41 05:09 ETA412608 KiB 1.20 M3:54 ETAc4% |*| 14976 KiB 1.24 MiB/s 03:45 ETA1954 ETAc6% |**| 20672 KiB 1.48 MiB/s 03:05 ETA7124849 ETAc7% |**| 22272 KiB 1.39 MiB/s 03:16 ETA316877 ETA4242929 ETA871364306 ETA9% |***892827 ETA95046 ETAc10% |***| 32512 KiB 1.46 MiB/s 02:59 ETA137288 ETAc 12% |****| 37440 KiB 1.54 MiB/s 02:46 ETA80829 ETA404655 ETA3403282 ETA424965147 ETAc 14% |****| 45184 KiB 1.54 MiB/s 02:42 ETA5% |*****62723742414 ETA688962 ETAc 16% |*****| 51072 KiB 1.53 MiB/s 02:39 ETA4844 ETA8*5808531 ETA998406522 ETA22*666887808 ETAc 23% |********| 71040 KiB 1.85 MiB/s 02:01 ETA795 ETA24484 ETA57952881:56 ETA7*826889549 ETA872322.004 ETAc 29% |**********| 88576 KiB 1.98 MiB/s 01:45 ETA47 ETAc 30% |**********| 92864 KiB 1.99 MiB/s 01:42 ETA1376063 ETA532 ETAc 32% |***********| 97728 KiB 1.96 MiB/s 01:41 ETA23 ETAc 33% |***********| 99904 KiB 1.93 MiB/s 01:41 ETA 98 M03 ETA9895*1039338 ETAc 35% |************| 105 MiB 1.94 MiB/s 01:37 ETA09 ETA6718 ETAc 36% |************| 109 MiB 1.89 MiB/s 01:38 ETA779 ETAc 37% |************| 110 MiB 1.86 MiB/s 01:38 ETA340 ETA8*4636 ETAc 39% |*************| 117 MiB 1.88 MiB/s 01:34 ETA55 ETA40*2073 ETAc 42% |**************| 124 MiB 1.90 MiB/s 01:29 ETA8731 ETA560 ETA4*309026 ETA5432 ETA7*9818 ETA8432.014 ETA9*622 ETA5151609 ETAc 53% |******************| 156 MiB 2.10 MiB/s 01:05 ETA076 ETA846183 ETAc 56% |*******************| 166 MiB 2.08 MiB/s 01:01 ETA7742 ETA7960 ETA9*76100:56 ETA60*924 ETAc 61% |*********************| 182 MiB 2.12 MiB/s 00:53 ETA02412 ETAc 63% |**********************| 186 MiB 2.10 MiB/s 00:51 ETA08c 64% |**********************| 191 MiB 2.11 MiB/s 00:49 ETA08528*201143 ETA9*680 ETA72*142435 ETAc 73% |*************************| 216 MiB 2.23 MiB/s 00:35 ETA1c 73% |*************************| 217 MiB 2.20 MiB/s 00:34 ETA195 ETA5*21203 ETA6620 ETA8*32727 ETA81*40323 ETA3*660 ETA6*544116 ETA7924 ETA860103 ETAc 88% |****************************** | 262 MiB 2.39 MiB/s 00:13 ETA9*3754420285790652 ETA472119886159321 ETA7010087152*432201.997635421350 ETA068909 ETA74988 ETA807 ETA5*1726 ETA3665445 ETA532614 ETA707978765833 ETA928*106990872 ETAc 98% |********************************** | 290 MiB 1.67 MiB/s 00:02 ETA6c 98% |********************************** | 290 MiB 1.65 MiB/s 00:02 ETA43211059921 ETA380 ETA47100*| 295 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- cd0a: error reading fsbn 530188 of 530188-530203 (cd0 bn 530188; cn 5301 tn 0 sngzip: can't read /mnt2//i386/binary/sets/misc.tgz: Device busy 00.00 KiB/s 00.00 KiB/s 00.00 KiB/s 00.00 KiB/s cd0a: error reading fsbn 530188 of 530188-530203 (cd0 bn 530188; cn 5301 tn 0 sngzip: can't read stdin: Device busy tar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0 0.00 KiB/s Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.01.28.13.37.39/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.01.28.13.37.39/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.01.28.13.37.39/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 11725 child_fd: 11 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11395.10 real 25.03 user 13.94 sys