This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.02.19.19.00.42/anita \ --structured-log-file=/bracket/i386/test/2018.02.19.19.00.42/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.02.19.19.00.42/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2018.02.19.19.00.42/anita/install_tmp.iso /bracket/i386/test/2018.02.19.19.00.42/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.02.19.19.00.42/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.02.19.19.00.42/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.02.19.19.00.42/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 27048 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-14515512\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block187): /bracket/i386/test/2018.02.19.19.00.42/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block308): /bracket/i386/test/2018.02.19.19.00.42/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block540): /bracket/i386/test/2018.02.19.19.00.42/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.02change floppy0 /bracket/i386/test/2018.02.change floppy0 /bracket/i386/test/2018.02.1change floppy0 /bracket/i386/test/2018.02.19change floppy0 /bracket/i386/test/2018.02.19.change floppy0 /bracket/i386/test/2018.02.19.1change floppy0 /bracket/i386/test/2018.02.19.19change floppy0 /bracket/i386/test/2018.02.19.19.change floppy0 /bracket/i386/test/2018.02.19.19.0change floppy0 /bracket/i386/test/2018.02.19.19.00 /-\|/-\|/-\|/-\|/-\|/-\|/-\|+5663036/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2018.02.19.19.00.change floppy0 /bracket/i386/test/2018.02.19.19.00.4change floppy0 /bracket/i386/test/2018.02.19.19.00.42change floppy0 /bracket/i386/test/2018.02.19.19.00.42/change floppy0 /bracket/i386/test/2018.02. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-+845700=0x140d0f4 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.12 (INSTALL) #0: Mon Feb 19 22:14:28 UTC 2018 root@babylon5.netbsd.org:/tmp/bracket/build/2018.02.19.19.00.42-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 105 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE182C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.12/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.12 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA35% |************7168 KiB 4.04 M00:03 ETA49*****9792332 ETA100******************| 199605.760 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA11% |***5184 KiB 2.80 M00:13 ETA3% |****614742****10688891 ETA8*28640 ETA32**4528432 ETA35232044****99685309 ETA8*22080628 ETA56***56007 ETA61**764826 ETA9***3136055 ETA78***520773 ETA85**8592802 ETA91** | 41216791 ETA8*** | 44224800 ETA100*| 4508068 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA12752 KiB 1.52 M01:37 ETA245442.0810 ETA6% |**10560950:47 ETAc8% |**| 13312 KiB 2.83 MiB/s 00:48 ETA3957 ETA9% |***4336141:04 ETA11836840:54 ETAc13% |****| 20224 KiB 2.29 MiB/s 00:57 ETA101:02 ETAc14% |****| 22528 KiB 2.09 MiB/s 01:01 ETA5% |*****32961.975 ETA4888310 ETA767529404 ETA8*892852 ETAc19% |******| 30720 KiB 1.94 MiB/s 01:02 ETA20*1552864 ETA87787 ETAc21% |*******| 32768 KiB 1.71 MiB/s 01:09 ETA6512 ETAc22% |*******| 34560 KiB 1.63 MiB/s 01:11 ETA574 ETAc23% |********| 36288 KiB 1.57 MiB/s 01:13 ETA07 ETA992478 ETAc24% |********| 38080 KiB 1.45 MiB/s 01:18 ETA021 ETAc24% |********| 38080 KiB 1.34 MiB/s 01:24 ETA07 ETAc 25% |********| 39552 KiB 1.30 MiB/s 01:26 ETA269 ETAc 25% |********| 39552 KiB 1.22 MiB/s 01:32 ETA185 ETAc 27% |*********| 43072 KiB 1.25 MiB/s 01:27 ETA130 ETA8416029 ETAc 29% |**********| 46464 KiB 1.24 MiB/s 01:25 ETA17 ETAc 31% |**********| 49600 KiB 1.25 MiB/s 01:22 ETA24 ETA2*501760c 33% |***********| 52032 KiB 1.22 MiB/s 01:22 ETA48641c 35% |************| 54912 KiB 1.23 MiB/s 01:19 ETA021 ETAc 36% |************| 56384 KiB 1.21 MiB/s 01:19 ETA1821 ETA777280 ETAc 38% |*************| 59392 KiB 1.19 MiB/s 01:18 ETA79 ETAc 40% |**************| 62464 KiB 1.20 MiB/s 01:14 ETA720186 ETA1419294 ETAc 42% |**************| 65728 KiB 1.19 MiB/s 01:13 ETA74 ETA4*95042208 ETA7*7353672 ETA9*6608300:59 ETAc 50% |*****************| 77888 KiB 1.30 MiB/s 00:58 ETA84642819427 ETA3*82560314 ETA4537631 ETAc 57% |*******************| 89728 KiB 1.38 MiB/s 00:46 ETA57 ETA90044c 60% |*********************| 93184 KiB 1.36 MiB/s 00:44 ETA44463*811280 ETAc 64% |**********************| 98 MiB 1.39 MiB/s 00:38 ETA76*101405 ETAc 68% |***********************| 103 MiB 1.40 MiB/s 00:34 ETA385 ETAc 69% |************************| 105 MiB 1.40 MiB/s 00:32 ETA7063871 ETAc 74% |*************************| 112 MiB 1.43 MiB/s 00:27 ETA3107*634 ETAc 77% |**************************| 117 MiB 1.42 MiB/s 00:23 ETA1c 79% |***************************| 120 MiB 1.42 MiB/s 00:21 ETA1c 80% |**************************** | 122 MiB 1.41 MiB/s 00:20 ETA391833*6917 ETA476*31424 ETA8332 ETA429*511 ETA60 ETA907183909 ETA988 ETA2*c 94% |******************************** | 142 MiB 1.38 MiB/s 00:06 ETA37c 99% |********************************** | 150 MiB 1.42 MiB/s 00:00 ETA11039100*87 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc18% |******| 768 KiB 389.90 KiB/s 00:08 ETA74.699 ETA100*****************************| 4210 KiB 1.19 M0 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 5696 KiB 3.36 MiB/s 01:29 ETA22:07 ETAc2% || 9088 KiB 2.51 MiB/s 01:59 ETA1.982:30 ETAc3% |*| 10368 KiB 1.82 MiB/s 02:42 ETA573:09 ETAc3% |*| 11840 KiB 1.53 MiB/s 03:12 ETA3538 ETA2608046 ETAc4% |*| 15680 KiB 1.45 MiB/s 03:20 ETA3240 ETA584964617 ETAc8% |**| 25600 KiB 1.85 MiB/s 02:32 ETA7287243 ETA6496677 ETA9% |***9120712 ETA30208685 ETA136066 ETAc10% |***| 32128 KiB 1.60 MiB/s 02:51 ETA576557 ETA152646049 ETA2% |****81453 ETA904025 ETA40613300850 ETA45504637 ETA65285% |*****89605 ETAc15% |*****| 49920 KiB 1.65 MiB/s 02:36 ETA65113637 ETA331254 ETAc18% |******| 58880 KiB 1.76 MiB/s 02:21 ETA94415 ETA96137642 ETA21*66248311 ETA3*73536961:59 ETA477602.034 ETA58166460 ETA6*4541047 ETAc 27% |*********| 87296 KiB 2.08 MiB/s 01:46 ETA67 ETAc 29% |**********| 91712 KiB 2.10 MiB/s 01:43 ETA76065 ETA30459273 ETAc 30% |**********| 97280 KiB 2.09 MiB/s 01:41 ETA1849662 ETA 98 M1 ETA2*95c 32% |***********| 101 MiB 2.05 MiB/s 01:40 ETA03 ETAc 33% |***********| 104 MiB 2.03 MiB/s 01:40 ETA41.982 ETAc 34% |***********| 106 MiB 1.99 MiB/s 01:41 ETA43 ETAc 34% |***********| 107 MiB 1.93 MiB/s 01:43 ETA5*805 ETA894 ETAc 35% |************| 109 MiB 1.86 MiB/s 01:45 ETA56 ETA61364 ETA7572 ETAc 38% |*************| 118 MiB 1.88 MiB/s 01:40 ETA61 ETAc 39% |*************| 121 MiB 1.87 MiB/s 01:39 ETA640 ETA3440*5637 ETA232921 ETA3*4429 ETA5865 ETA6*4293 ETA772.0318 ETA9*5284 ETA517110 ETAc 52% |******************| 161 MiB 2.13 MiB/s 01:08 ETA19 ETA209c 54% |******************| 166 MiB 2.12 MiB/s 01:06 ETA097 ETA76*74142 ETAc 58% |********************| 178 MiB 2.17 MiB/s 00:59 ETA941:00 ETA800:59 ETA9467 ETAc 61% |*********************| 188 MiB 2.18 MiB/s 00:54 ETA55 ETAc 62% |*********************| 190 MiB 2.15 MiB/s 00:54 ETA3c 62% |*********************| 191 MiB 2.11 MiB/s 00:54 ETA095 ETA28c 63% |**********************| 196 MiB 2.09 MiB/s 00:53 ETA7482 ETAc 65% |**********************| 202 MiB 2.09 MiB/s 00:50 ETA386*548 ETAc 67% |***********************| 208 MiB 2.09 MiB/s 00:47 ETA68 ETA81076 ETAc 69% |************************| 214 MiB 2.09 MiB/s 00:44 ETA7c 70% |************************| 217 MiB 2.08 MiB/s 00:43 ETA51962 ETA2*2370 ETA36938 ETAc 74% |*************************| 228 MiB 2.08 MiB/s 00:38 ETA6c 74% |*************************| 230 MiB 2.06 MiB/s 00:37 ETA48 ETA6*475 ETAc 77% |**************************| 238 MiB 2.08 MiB/s 00:33 ETA69*4380 ETA80*71028 ETA25444 ETAc 83% |***************************** | 256 MiB 2.14 MiB/s 00:23 ETA3c 83% |***************************** | 256 MiB 2.11 MiB/s 00:24 ETA09c 84% |***************************** | 259 MiB 2.09 MiB/s 00:23 ETA856291 ETA6*61019 ETA7918 ETA87107 ETA09286 ETA3769*4545325 ETA607901.9884 ETA65943108988071654120278c 91% |******************************* | 282 MiB 1.77 MiB/s 00:14 ETA63542*321069487643 ETA5363722 ETA8109591 ETA4910 ETAc 95% |********************************* | 294 MiB 1.58 MiB/s 00:08 ETA667 ETA76 ETA765483725 ETA91c 97% |********************************* | 299 MiB 1.51 MiB/s 00:05 ETA0c 97% |********************************* | 299 MiB 1.49 MiB/s 00:05 ETA3008c 97% |********************************* | 300 MiB 1.48 MiB/s 00:05 ETA7 97% |********************************* | 300 MiB 1.47 MiB/s 00:05 ETAc54 ETAc cd0a: error reading fsbn 422520 of 422520-422647 (cd0 bn 422520; cn 4225 tn 0 sn 97% |********************************* | 300 MiB 1.45 MiB/s 00:04 ETA14c 97% |********************************* | 301 MiB 1.44 MiB/s 00:04 ETA3c 97% |********************************* | 301 MiB 1.43 MiB/s 00:04 ETAc 98% |********************************** | 301 MiB 1.42 MiB/s 00:04 ETA 21c cd0a: error reading fsbn 422648 of 422648-422775 (cd0 bn 422648; cn 4226 tn 0 sn 98% |********************************** | 302 MiB 1.41 MiB/s 00:04 ETAc 98% |********************************** | 302 MiB 1.39 MiB/s 00:03 ETAc 98% |********************************** | 302 MiB 1.38 MiB/s 00:03 ETAc 98% |********************************** | 302 MiB 1.37 MiB/s 00:03 ETAc cd0a: error reading fsbn 422776 of 422776-422903 (cd0 bn 422776; cn 4227 tn 0 sn 98% |********************************** | 302 MiB 1.36 MiB/s 00:03 ETAc 98% |********************************** | 302 MiB 1.34 MiB/s - stalled - 3c 98% |********************************** | 302 MiB 1.32 MiB/s - stalled -c 98% |********************************** | 302 MiB 1.31 MiB/s - stalled -c cd0a: error reading fsbn 422904 of 422904-423031 (cd0 bn 422904; cn 4229 tn 0 sn 98% |********************************** | 302 MiB 1.30 MiB/s - stalled -c 98% |********************************** | 302 MiB 1.29 MiB/s - stalled -8 00:03 ETA37c 98% |********************************** | 303 MiB 1.26 MiB/s 00:03 ETA5c 98% |********************************** | 303 MiB 1.24 MiB/s 00:03 ETAc 98% |********************************** | 303 MiB 1.23 MiB/s 00:03 ETAc 98% |********************************** | 303 MiB 1.22 MiB/s 00:03 ETAc 98% |********************************** | 303 MiB 1.21 MiB/s - stalled -c cd0a: error reading fsbn 422792 of 422792-422807 (cd0 bn 422792; cn 4227 tn 0 sn gzip: failed to read stdin: Device busy tar: End of archive volume 1 reachedtar: Unexpected EOF on archive file 98% |********************************** | 303 MiB 1.20 MiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.02.19.19.00.42/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.02.19.19.00.42/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.02.19.19.00.42/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 27048 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11392.09 real 27.04 user 13.28 sys