This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.02.20.13.14.02/anita \ --structured-log-file=/bracket/i386/test/2018.02.20.13.14.02/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.02.20.13.14.02/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2018.02.20.13.14.02/anita/install_tmp.iso /bracket/i386/test/2018.02.20.13.14.02/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.02.20.13.14.02/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.02.20.13.14.02/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.02.20.13.14.02/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 5318 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 0 seconds. |/-14515552\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block110): /bracket/i386/test/2018.02.20.13.14.02/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block320): /bracket/i386/test/2018.02.20.13.14.02/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block525): /bracket/i386/test/2018.02.20.13.14.02/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.02change floppy0 /bracket/i386/test/2018.02.change floppy0 /bracket/i386/test/2018.02.2change floppy0 /bracket/i386/test/2018.02.20chan /-\|/-\|/-\|/-\|/-\|/-\|/-\|+5663036/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2018.02.20.change floppy0 /bracket/i386/test/2018.02.20.1change floppy0 /bracket/i386/test/2018.02.20.13change floppy0 /bracket/i386/test/2018.02.20.13.change floppy0 /bracket/i386/test/2018.02.20.13.1change floppy0 /bracket/i386/test/2018.02.20.13.14 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-+845700=0x140d0f4 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.12 (INSTALL) #0: Tue Feb 20 16:43:18 UTC 2018 root@babylon5.netbsd.org:/tmp/bracket/build/2018.02.20.13.14.02-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 105 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 0001) ACPI: HPET 0x0000000007FE18A4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.12/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 1 0s (2688 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 9723 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 9720 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" monobit test FAILURE: 10309 ones cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too few runs of 1 0s (2304 <= 2315) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.12 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA42% |**************8512 KiB 5.32 M00:02 ETA63********12736271 ETA100*************| 19960300 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA14% |****6336 KiB 3.49 M00:10 ETA8**84487409 ETA2***128004832**4656318 ETA8**73440645**20480127 ETA53***40066 ETA9**6624075 ETA65**969684 ETA74***33792153 ETA85****8528291 ETAc91% |******************************* | 41216 KiB 3.24 MiB/s 00:01 ETA2.955** | 432640 ETA100**| 4508086 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc2% || 3904 KiB 2.27 MiB/s 01:04 ETA1.6330 ETA5% |*8062.3101 ETA8% |**134403.040:45 ETAc11% |***| 18496 KiB 3.33 MiB/s 00:40 ETA2.78 ETAc13% |****| 20800 KiB 2.79 MiB/s 00:46 ETA15684054 ETA4760296 ETA8% |******80966447 ETA20*31552704 ETAc21% |*******| 32768 KiB 2.54 MiB/s 00:46 ETA3750 ETAc22% |*******| 34432 KiB 2.32 MiB/s 00:50 ETA164 ETA4*87203149 ETAc27% |*********| 42240 KiB 2.34 MiB/s 00:47 ETA239 ETAc27% |*********| 42240 KiB 2.10 MiB/s 00:52 ETA014 ETAc28% |*********| 43712 KiB 1.98 MiB/s 00:54 ETA897 ETAc29% |**********| 45248 KiB 1.87 MiB/s 00:57 ETA09 ETA30742427 ETAc 32% |***********| 50368 KiB 1.85 MiB/s 00:55 ETA787 ETA4292824 ETAc 35% |************| 55616 KiB 1.82 MiB/s 00:53 ETA794 ETAc 35% |************| 55616 KiB 1.71 MiB/s 00:56 ETA677 ETAc 37% |************| 58368 KiB 1.69 MiB/s 00:55 ETA57 ETAc 37% |************| 58368 KiB 1.60 MiB/s 00:59 ETA561:00 ETAc 39% |*************| 60800 KiB 1.58 MiB/s 00:58 ETA16966c 39% |*************| 61696 KiB 1.52 MiB/s 00:59 ETA481:01 ETA52 ETAc 40% |**************| 63360 KiB 1.45 MiB/s 01:01 ETA23 ETAc 40% |**************| 63360 KiB 1.38 MiB/s 01:04 ETA56 ETA252873 ETAc 42% |**************| 66496 KiB 1.36 MiB/s 01:03 ETA34 ETAc 42% |**************| 66496 KiB 1.31 MiB/s 01:06 ETA287 ETA5*70208332 ETAc 48% |****************| 75712 KiB 1.40 MiB/s 00:55 ETA386 ETAc 48% |****************| 75712 KiB 1.35 MiB/s 00:57 ETA38 ETAc 49% |*****************| 76672 KiB 1.32 MiB/s 00:57 ETA5076961c 50% |*****************| 77696 KiB 1.29 MiB/s 00:58 ETA79 ETAc 50% |*****************| 77696 KiB 1.25 MiB/s 01:00 ETA31 ETAc 50% |*****************| 77696 KiB 1.21 MiB/s 01:02 ETA19- stalled -8018 01:03 ETAc 52% |******************| 81088 KiB 1.20 MiB/s 00:59 ETA191:00 ETAc 52% |******************| 81088 KiB 1.17 MiB/s 01:01 ETA52 ETAc 52% |******************| 81088 KiB 1.13 MiB/s 01:03 ETA24 ETA336441 ETAc 57% |*******************| 89728 KiB 1.20 MiB/s 00:53 ETA19c 57% |*******************| 89728 KiB 1.17 MiB/s 00:54 ETA65 ETAc 58% |********************| 90944 KiB 1.16 MiB/s 00:54 ETA41520361*484860 ETAc 63% |**********************| 99008 KiB 1.20 MiB/s 00:45 ETA186 ETA5 99 M202 ETAc 69% |************************| 105 MiB 1.26 MiB/s 00:36 ETA65c 69% |************************| 106 MiB 1.23 MiB/s 00:36 ETA27 ETA7076 ETAc 72% |*************************| 110 MiB 1.24 MiB/s 00:33 ETA2c 73% |*************************| 112 MiB 1.24 MiB/s 00:31 ETA22 ETA41 ETAc 75% |**************************| 113 MiB 1.21 MiB/s 00:31 ETA0c 77% |**************************| 117 MiB 1.23 MiB/s 00:27 ETA2c 77% |**************************| 117 MiB 1.20 MiB/s 00:27 ETA198 ETAc 79% |***************************| 120 MiB 1.20 MiB/s 00:26 ETA19c 79% |***************************| 120 MiB 1.18 MiB/s 00:26 ETA780*284 ETA133 ETA4*82118 ETAc 86% |****************************** | 130 MiB 1.22 MiB/s 00:17 ETA1c 86% |****************************** | 130 MiB 1.20 MiB/s 00:17 ETA726 ETA8414 ETA09*53 ETA9071 ETAc 91% |******************************* | 138 MiB 1.20 MiB/s 00:10 ETA2*9109 ETAc 93% |******************************** | 141 MiB 1.21 MiB/s 00:08 ETA427 ETA36 ETA9** | 15050 ETA143100*2 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc56% |*******************| 2368 KiB 1.21 MiB/s 00:01 ETA09100****************| 421050 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 768 KiB 396.24 KiB/s 13:13 ETA69.554:11 ETAc0% || 768 KiB 200.03 KiB/s 26:12 ETA1280 KiB 307.7017:00 ETAc1% || 3200 KiB 556.48 KiB/s 09:20 ETA584 KiB 571.5505 ETA3% |*11968 KiB 1.57 M3:07 ETAc4% |*| 15040 KiB 1.72 MiB/s 02:50 ETA543:09 ETAc5% |*| 17600 KiB 1.65 MiB/s 02:56 ETA483:15 ETA6% |**20928672:51 ETAc7% |**| 24576 KiB 1.75 MiB/s 02:41 ETA669 ETA9% |***8417836 ETAc9% |***| 28864 KiB 1.70 MiB/s 02:43 ETA9760667 ETAc9% |***| 30720 KiB 1.61 MiB/s 02:51 ETA533:00 ETA10340892:52 ETA16286544 ETA2% |****88470 ETA993661 ETA3426247036 ETA3776678 ETA4595294 ETA5% |*****8000702 ETAc 15% |*****| 49856 KiB 1.70 MiB/s 02:31 ETA65081683 ETAc 17% |*****| 53824 KiB 1.72 MiB/s 02:28 ETA9526732 ETA8*6837027 ETAc 20% |*******| 63168 KiB 1.84 MiB/s 02:13 ETA451214 ETA640787 ETA2721929302 ETA5*91042.061:51 ETA7*863361941 ETAc 28% |*********| 91328 KiB 2.26 MiB/s 01:36 ETA199 ETAc 29% |**********| 93440 KiB 2.20 MiB/s 01:38 ETA1441 ETAc 30% |**********| 95296 KiB 2.14 MiB/s 01:39 ETA0843 ETA7600101 ETAc 32% |***********| 99 MiB 2.14 MiB/s 01:36 ETA08 ETA310326 ETAc 34% |***********| 106 MiB 2.15 MiB/s 01:33 ETA05 ETAc 35% |************| 108 MiB 2.11 MiB/s 01:33 ETA9084 ETA1065 ETAc 36% |************| 111 MiB 2.03 MiB/s 01:36 ETA17 ETA8*81029 ETAc 39% |*************| 120 MiB 2.08 MiB/s 01:29 ETA630 ETA40*61225 ETA3*3290 ETA472415 ETA6*4282 ETA773308 ETAc 49% |*****************| 152 MiB 2.36 MiB/s 01:05 ETA26 ETA504505 ETA1814 ETA2*6242 ETAc 53% |******************| 165 MiB 2.34 MiB/s 01:00 ETA11 ETAc 54% |******************| 169 MiB 2.33 MiB/s 00:59 ETA5*01:00 ETA710:59 ETA7536 ETA8*8063 ETAc 59% |********************| 182 MiB 2.35 MiB/s 00:53 ETA3c 60% |*********************| 186 MiB 2.34 MiB/s 00:51 ETA731802 ETA29120 ETAc 63% |**********************| 196 MiB 2.34 MiB/s 00:47 ETA18 ETA4826 ETAc 65% |**********************| 203 MiB 2.34 MiB/s 00:44 ETA15 ETAc 66% |***********************| 204 MiB 2.31 MiB/s 00:44 ETA285 ETA764 ETAc 67% |***********************| 208 MiB 2.27 MiB/s 00:43 ETA54 ETA81271 ETAc 69% |************************| 214 MiB 2.26 MiB/s 00:41 ETA4c 71% |************************| 219 MiB 2.27 MiB/s 00:39 ETA4c 71% |************************| 221 MiB 2.23 MiB/s 00:38 ETA2*3147 ETA43044 ETA6*472 ETA8*403029 ETA9427 ETA81*5273 ETA4*94219 ETA7*6876 ETA705 ETA8164 ETA24339*413 ETA50386659073822 ETA092748031101187251 ETA4213092*6443151.98c 93% |******************************** | 286 MiB 1.97 MiB/s 00:10 ETA786509 ETA944918 ETA5*37 ETA4356 ETA62605 ETA78988767954 ETA330010793 ETA1878* | 3025312 ETA369874654951 ETA630 ETA270100* Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 192 KiB 98.23 KiB/s 02:32 ETA3.4540 ETAc1% || 192 KiB 48.41 KiB/s 05:10 ETA7.456 ETAc1% || 192 KiB 32.44 KiB/s 07:43 ETA1.4957 ETAc1% || 192 KiB 24.32 KiB/s - stalled -3.66ccd0a: error reading fsbn 541268 of 541268-541283 (cd0 bn 541268; cn 5412 tn 0 sngzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Unexpected EOF on archive file 1% || 192 KiB 23.47 KiB/s - stalled -Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.02.20.13.14.02/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.02.20.13.14.02/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.02.20.13.14.02/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 5318 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11348.71 real 21.60 user 13.94 sys