This is anita version 1.43a /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.02.22.01.59.28/anita \ --structured-log-file=/bracket/i386/test/2018.02.22.01.59.28/install.slog \ --vmm-args= \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.02.22.01.59.28/release/i386/ makefs -t cd9660 -o rockridge /bracket/i386/test/2018.02.22.01.59.28/anita/install_tmp.iso /bracket/i386/test/2018.02.22.01.59.28/release Creating hard disk image...QEMU emulator version 2.8.1 Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.02.22.01.59.28/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.02.22.01.59.28/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.02.22.01.59.28/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a child pid is 20165 NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 0 seconds. |/-14515468\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.8.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block179): /bracket/i386/test/2018.02.22.01.59.28/anita/wd0.img (raw) Cache mode: writeback ide0-cd1 (#block370): /bracket/i386/test/2018.02.22.01.59.28/anita/install_tmp.iso (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block541): /bracket/i386/test/2018.02.22.01.59.28/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.02change floppy0 /bracket/i386/test/2018.02.change floppy0 /bracket/i386/test/2018.02.2change floppy0 /bracket/i386/test/2018.02.22change floppy0 /bracket/i386/test/2018.02.22.change floppy0 /bracket/i386/test/2018.02.22.0change floppy0 /bracket/i386/test/2018.02.22.01change floppy0 /bracket/i386/test/2018.02.22.01.change floppy0 /bracket/i386/test/2018.02.22.01.5change floppy0 /bracket/i386/test/2018.02.22.01.59 /-\|/-\|/-\|/-\|/-\|/-\|/-\|+5663100/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2018.02.22.01.59.change floppy0 /bracket/i386/test/2018.02.22.01.59.2change floppy0 /bracket/i386/test/2018.02.22.01.59.28change floppy0 /bracket/i386/test/2018.02.22.01.59.28/change floppy0 /bracket/i386/test/2018.02. -\|/-\|/-\|/-\|/-\|/-\|/-\|/-+845700=0x140d134 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.12 (INSTALL) #0: Thu Feb 22 04:21:24 UTC 2018 root@babylon5.netbsd.org:/tmp/bracket/build/2018.02.22.01.59.28-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 105 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE18DC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE17B8 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001778 (v01 BOCHS BXPCDSDT 00000001 BXPC 00 tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 3 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.12/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2705 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 26 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 26 0s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 4 0s (388 >= 384) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 29 0s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 1 0s (2718 >= 2685) cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.12 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA60% |*********************12032 KiB 8.23 M00:00 ETA10**************| 1996041 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA13% |****5888 KiB 3.30 M00:11 ETA6*7440 ETA27****12604709 ETA33**4912338 ETA44****9904556 ETA51**2304009***700864 ETA66***988428309121572**2704033 ETA8**558082*73762.922 ETA8**9808871 ETA91* | 41024756** | 4371270 ETA100**| 4508066 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA3% |*5184 KiB 3.39 M00:43 ETA58341 ETA7% |**12416538 ETA11% |***7280904 ETAc12% |****| 18688 KiB 3.24 MiB/s 00:41 ETA2.856 ETAc13% |****| 20224 KiB 2.60 MiB/s 00:50 ETA346 ETA5% |*****3552452 ETAc16% |*****| 25088 KiB 2.31 MiB/s 00:54 ETA149 ETAc17% |*****| 26880 KiB 2.04 MiB/s 01:01 ETA1.992 ETAc18% |******| 28416 KiB 1.87 MiB/s 01:05 ETA28 ETA996327310 ETAc19% |******| 30912 KiB 1.75 MiB/s 01:09 ETA20*1556313 ETA8724 ETAc22% |*******| 34816 KiB 1.63 MiB/s 01:11 ETA593 ETAc24% |********| 38080 KiB 1.64 MiB/s 01:09 ETA5812 ETA6*404486009 ETAc26% |*********| 41216 KiB 1.58 MiB/s 01:10 ETA8013 ETAc 27% |*********| 43392 KiB 1.54 MiB/s 01:10 ETA483 ETAc 27% |*********| 43392 KiB 1.43 MiB/s 01:15 ETA388 ETAc 28% |*********| 44800 KiB 1.39 MiB/s 01:17 ETA420 ETAc 29% |**********| 45824 KiB 1.34 MiB/s 01:19 ETA552922 ETAc 29% |**********| 45855 KiB 1.26 MiB/s 01:24 ETA3067844c 30% |**********| 48000 KiB 1.25 MiB/s 01:23 ETA06 ETA2*998442 ETAc 33% |***********| 51264 KiB 1.22 MiB/s 01:22 ETA13 ETAc 35% |************| 55296 KiB 1.26 MiB/s 01:17 ETA48 ETAc 35% |************| 55296 KiB 1.20 MiB/s 01:20 ETA191 ETAc 36% |************| 56832 KiB 1.18 MiB/s 01:20 ETA72 ETAc 37% |************| 58112 KiB 1.16 MiB/s 01:21 ETA42 ETAc 38% |*************| 59712 KiB 1.15 MiB/s 01:20 ETA32 ETAc 38% |*************| 59712 KiB 1.10 MiB/s 01:24 ETA095 ETA961568102 ETAc 41% |**************| 65088 KiB 1.14 MiB/s 01:16 ETA28 ETAc 41% |**************| 65088 KiB 1.10 MiB/s 01:19 ETA0820 ETA228072 ETAc 42% |**************| 66112 KiB 1.06 MiB/s 01:21 ETA7642 ETAc 42% |**************| 66193 KiB 1.03 MiB/s 01:24 ETA49625*70784716 ETAc 46% |****************| 72896 KiB 1.08 MiB/s 01:14 ETA75 ETAc 46% |****************| 72896 KiB 1.05 MiB/s 01:16 ETA47 ETAc 48% |****************| 75072 KiB 1.05 MiB/s 01:14 ETA45 ETAc 49% |*****************| 77184 KiB 1.05 MiB/s 01:12 ETA43 ETAc 49% |*****************| 77184 KiB 1.02 MiB/s 01:14 ETA15 ETA51968021 ETA3*82496507 ETAc 56% |*******************| 87168 KiB 1.09 MiB/s 01:00 ETA23281 ETAc 56% |*******************| 87232 KiB 1.07 MiB/s 01:02 ETA578511 ETA8*9126480:57 ETAc 59% |********************| 92864 KiB 1.08 MiB/s 00:56 ETA7c 59% |********************| 92864 KiB 1.05 MiB/s 00:57 ETA48 ETAc 61% |*********************| 95296 KiB 1.06 MiB/s 00:55 ETA53*88171 ETAc 64% |**********************| 97 MiB 1.08 MiB/s 00:49 ETA650 ETA6*101945 ETAc 68% |***********************| 104 MiB 1.11 MiB/s 00:42 ETA03 ETAc 68% |***********************| 104 MiB 1.08 MiB/s 00:43 ETAc 69% |************************| 105 MiB 1.07 MiB/s 00:42 ETA3 ETAc 69% |************************| 105 MiB 1.05 MiB/s 00:43 ETA44 ETAc 70% |************************| 107 MiB 1.05 MiB/s 00:41 ETA42 ETAc 70% |************************| 107 MiB 1.03 MiB/s 00:42 ETA2c 72% |*************************| 110 MiB 1.04 MiB/s 00:39 ETA340 ETA42437 ETAc 76% |**************************| 115 MiB 1.06 MiB/s 00:34 ETA5c 76% |**************************| 115 MiB 1.04 MiB/s 00:34 ETA3c 77% |**************************| 116 MiB 1.03 MiB/s 00:33 ETAc 77% |**************************| 116 MiB 1.01 MiB/s 00:34 ETAc 77% |**************************| 116 MiB 0.99 MiB/s 00:34 ETAc 77% |**************************| 116 MiB 0.98 MiB/s - stalled -80**211.00 00:29 ETAc 81% |**************************** | 123 MiB 1.00 MiB/s 00:28 ETA0.99247 ETA4*71.004 ETA5912 ETAc 87% |****************************** | 131 MiB 1.02 MiB/s 00:19 ETA28 ETA8436 ETA29*55 ETAc 90% |******************************* | 137 MiB 1.02 MiB/s 00:14 ETA1832 ETAc 91% |******************************* | 139 MiB 1.02 MiB/s 00:11 ETA2 ETAc 92% |******************************** | 140 MiB 1.01 MiB/s 00:10 ETA31209 ETAc 94% |******************************** | 142 MiB 1.02 MiB/s 00:08 ETA1c 94% |******************************** | 142 MiB 1.00 MiB/s 00:08 ETA6*615 ETA9* | 15041 ETA30 ETA1100*2Finished cd0(piixide0:0:1): adapter resource shortage Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4210 KiB 2.20 M00:00 ETA1.910 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA28384 KiB 4.84 M01:01 ETA3% |*1113690 ETAc5% |*| 15936 KiB 4.28 MiB/s 01:08 ETA3.5322 ETAc5% |*| 17728 KiB 3.14 MiB/s 01:32 ETA2.6549 ETAc5% |*| 17728 KiB 2.30 MiB/s 02:06 ETA0322 ETAc5% |*| 17728 KiB 1.81 MiB/s 02:39 ETA6555 ETAc5% |*| 17728 KiB 1.50 MiB/s - stalled -376% |**20952 03:08 ETAc8% |**| 25984 KiB 1.77 MiB/s 02:39 ETA61766253 ETA70082 ETA9% |***9881 ETA300161c10% |***| 32576 KiB 1.61 MiB/s 02:51 ETA832584 ETAc11% |***| 34944 KiB 1.56 MiB/s 02:54 ETA69286147 ETA76325455 ETA2% |****878453 ETA9936443:06 ETA407045 ETA3345682:58 ETAc 13% |****| 43840 KiB 1.46 MiB/s 03:00 ETA457651 ETA601632 ETA5% |*****748814 ETAc 15% |*****| 48640 KiB 1.39 MiB/s 03:06 ETA9679 ETA503047 ETAc 16% |*****| 50944 KiB 1.37 MiB/s 03:08 ETA2032411 ETA74464902 ETA8*9328452:51 ETA776c 21% |*******| 67200 KiB 1.57 MiB/s 02:33 ETA46 ETA271104929 ETA4*6226818 ETAc 24% |********| 77504 KiB 1.65 MiB/s 02:20 ETA8884c 26% |*********| 84992 KiB 1.75 MiB/s 02:08 ETA011 ETA7665610 ETAc 29% |**********| 91520 KiB 1.77 MiB/s 02:03 ETA36 ETA382443 ETA30728081:59 ETA2* 99 M823 ETA3103649 ETAc 35% |************| 109 MiB 1.93 MiB/s 01:42 ETA13 ETA10884 ETA759438 ETA9*212.012 ETAc 41% |**************| 126 MiB 2.05 MiB/s 01:28 ETA19 ETAc 41% |**************| 126 MiB 1.99 MiB/s 01:31 ETA52 ETA73*342.0125 ETAc 45% |***************| 138 MiB 2.05 MiB/s 01:22 ETA23 ETA4017*5618 ETA8995 ETA50*54141 ETA2*60807 ETA46242 ETA6*74310:57 ETA8*8063 ETAc 59% |********************| 184 MiB 2.37 MiB/s 00:52 ETA4c 59% |********************| 184 MiB 2.31 MiB/s 00:53 ETA284 ETA60*63 ETA291310 ETAc 63% |**********************| 195 MiB 2.33 MiB/s 00:48 ETA0c 63% |**********************| 195 MiB 2.28 MiB/s 00:49 ETA550 ETA6449 ETA520186 ETA7*6313 ETAc 69% |************************| 213 MiB 2.36 MiB/s 00:39 ETA4340 ETAc 69% |************************| 214 MiB 2.31 MiB/s 00:40 ETA281 ETA7c 70% |************************| 216 MiB 2.26 MiB/s 00:40 ETA4121737 ETA3*695 ETA5*31332 ETA6650 ETAc 78% |***************************| 243 MiB 2.39 MiB/s 00:27 ETA97c 79% |***************************| 243 MiB 2.35 MiB/s 00:27 ETA2c 79% |***************************| 244 MiB 2.31 MiB/s 00:27 ETA5028c 80% |**************************** | 248 MiB 2.28 MiB/s 00:26 ETA61505 ETAc 81% |**************************** | 252 MiB 2.25 MiB/s 00:24 ETA4c 83% |***************************** | 256 MiB 2.25 MiB/s 00:22 ETA33 ETAc 83% |***************************** | 256 MiB 2.21 MiB/s 00:23 ETA197c 84% |***************************** | 259 MiB 2.19 MiB/s 00:21 ETA72 ETAc 85% |***************************** | 262 MiB 2.17 MiB/s 00:20 ETA66*6718 ETA7987 ETAc 88% |****************************** | 270 MiB 2.17 MiB/s 00:16 ETA263545 ETA9*4325009687590744 ETA38201.99879543208980817654120797253312*698765443215059363 ETA72 ETA887c 93% |******************************** | 288 MiB 1.56 MiB/s 00:12 ETA4901 ETA150 ETA245*309 ETA48 ETA35667 ETA27106 ETAc 96% |********************************* | 298 MiB 1.49 MiB/s 00:06 ETAc 97% |********************************* | 299 MiB 1.48 MiB/s 00:05 ETAc 97% |********************************* | 299 MiB 1.47 MiB/s 00:05 ETA 6 97% |********************************* | 299 MiB 1.46 MiB/s 00:05 ETAc3005c cd0a: error reading fsbn 422012 of 422012-422139 (cd0 bn 422012; cn 4220 tn 0 sn 97% |********************************* | 300 MiB 1.45 MiB/s 00:05 ETA4 97% |********************************* | 300 MiB 1.44 MiB/s 00:05 ETAc3c 97% |********************************* | 300 MiB 1.42 MiB/s 00:05 ETA1c 97% |********************************* | 300 MiB 1.41 MiB/s 00:04 ETA013988*726543 ETA33210298472 ETA695651 ETA0 ETA7100*4 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAccd0a: error reading fsbn 541172 of 541172-541187 (cd0 bn 541172; cn 5411 tn 0 sn0% || 00.00 KiB/s --:-- ETAgzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0% || 00.00 KiB/s --:-- ETACommand failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 147, in status = main() File "/usr/pkg/bin/anita", line 127, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1603, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1337, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.02.22.01.59.28/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.02.22.01.59.28/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.02.22.01.59.28/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 20165 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(not-in-use)|(not-in-use)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11411.83 real 31.80 user 12.72 sys