This is anita version 1.44 /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.03.12.07.35.45/anita \ --structured-log-file=/bracket/i386/test/2018.03.12.07.35.45/install.slog \ --vmm-args=-tb-size 128 \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/ Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/floppy/boot-com1.fs... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/floppy/boot2.fs... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/floppy/boot3.fs... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/floppy/boot4.fs... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/floppy/boot5.fs... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/floppy/boot6.fs... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/cdrom/boot-com.iso... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/installation/misc/pxeboot_ia32.bin... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/binary/sets/modules.tgz... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/binary/sets/base.tgz... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/binary/sets/etc.tgz... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/binary/sets/comp.tgz... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/binary/sets/misc.tgz... OK Downloading file:///bracket/i386/test/2018.03.12.07.35.45/release/i386/binary/sets/tests.tgz... OK makefs -t cd9660 -o rockridge /bracket/i386/test/2018.03.12.07.35.45/anita/install_tmp.iso /bracket/i386/test/2018.03.12.07.35.45/anita/download Creating hard disk image...QEMU emulator version 2.11.1 Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.03.12.07.35.45/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.03.12.07.35.45/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.03.12.07.35.45/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -tb-size \ 128 child pid is 23734 SeaBIOS (version rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+07F915A0+07EF15A0 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-14516092\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.11.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block134): /bracket/i386/test/2018.03.12.07.35.45/anita/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback ide0-cd1 (#block305): /bracket/i386/test/2018.03.12.07.35.45/anita/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block573): /bracket/i386/test/2018.03.12.07.35.45/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[20] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /brac -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/t \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...Dchange floppy0 /bracket/i386/techange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...Dchange floppy0 /bracket/i386/test/2018change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.03change floppy0 /bracket/i386/test/2018.03.change floppy0 /bracket/i386/test/2018.03.1change floppy0 /brack /-\|/-\|/-\|/-\|/-\|/-\|/-\|+5663236/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...et/i386/test/2018.03.12change floppy0 /bracket/i386/test/2018.03.12.change floppy0 /bracket/i386/test/2018.03.12.0change floppy0 /bracket/i386/test/2018.03.12.07change floppy0 /bracket/i386/test/2018.03.12.07.change floppy0 /bracket/i386/test/2018.03.12.07.3 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-+846012=0x140d2f4 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.12 (INSTALL) #0: Mon Mar 12 21:14:07 UTC 2018 root@babylon5.netbsd.org:/tmp/bracket/build/2018.03.12.07.35.45-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 105 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE15FC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE1458 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001418 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE154C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE15C4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 2 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.12/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) Kernel RNG "kernel" long run test FAILURE: Run of 27 1s found cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 1 0s (2690 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too few runs of 5 0s (103 <= 103) cprng kernel: failed statistical RNG test Kernel RNG "kernel" long run test FAILURE: Run of 26 0s found cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.12 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.12 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA41% |**************8320 KiB 5.21 M00:02 ETA62*******12544371 ETA100**************| 199606.200 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA17% |*****7744 KiB 4.52 M00:08 ETA22**1030437 ETA33****5232316 ETA44****9968455 ETA51**231041660****739294 ETA9***3148843 ETA80****6544232 ETA9*** | 4108870 ETA9*** | 451203100*| 452610 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA5% |*8448 KiB 5.63 M00:25 ETA8% |**13632824 ETAc10% |***| 16512 KiB 4.56 MiB/s 00:30 ETA3.598 ETAc12% |****| 20096 KiB 3.59 MiB/s 00:37 ETA2.944 ETAc13% |****| 21376 KiB 2.83 MiB/s 00:46 ETA4154 ETAc14% |****| 23104 KiB 2.43 MiB/s 00:53 ETA101:02 ETA5% |*****87208c16% |*****| 26560 KiB 2.04 MiB/s 01:02 ETA1.935 ETA9*302722.040 ETAc20% |*******| 32640 KiB 2.05 MiB/s 00:59 ETA1.921:03 ETA253922.000:59 ETAc26% |*********| 41024 KiB 2.16 MiB/s 00:52 ETA055 ETAc28% |*********| 44416 KiB 2.12 MiB/s 00:51 ETA80004 ETA9921.965 ETAc31% |**********| 49408 KiB 2.04 MiB/s 00:51 ETA1.973 ETA2*510725c 34% |***********| 54784 KiB 2.03 MiB/s 00:49 ETA5*59361.9450 ETA31 ETAc 38% |*************| 60864 KiB 1.98 MiB/s 00:47 ETA58 ETAc 39% |*************| 62592 KiB 1.91 MiB/s 00:48 ETA889 ETAc 39% |*************| 62592 KiB 1.80 MiB/s 00:51 ETA772 ETA40*432051 ETA1604870 ETAc 42% |**************| 67648 KiB 1.74 MiB/s 00:50 ETA2c 42% |**************| 67648 KiB 1.65 MiB/s 00:52 ETA33 ETAc 42% |**************| 67648 KiB 1.57 MiB/s 00:55 ETA3*71256 ETAc 45% |***************| 72064 KiB 1.61 MiB/s 00:51 ETA572 ETA7*417691 ETAc 48% |****************| 76288 KiB 1.59 MiB/s 00:49 ETA650 ETAc 48% |****************| 76288 KiB 1.52 MiB/s 00:51 ETA02 ETAc 48% |****************| 76288 KiB 1.46 MiB/s 00:53 ETA44 ETAc 49% |*****************| 78464 KiB 1.45 MiB/s 00:52 ETA23 ETAc 49% |*****************| 78464 KiB 1.40 MiB/s 00:54 ETA375 ETA518064093 ETAc 53% |******************| 83584 KiB 1.41 MiB/s 00:50 ETA391 ETAc 53% |******************| 83584 KiB 1.36 MiB/s 00:52 ETA43 ETAc 54% |******************| 84992 KiB 1.34 MiB/s 00:52 ETA23 ETA64002 ETAc 55% |*******************| 87680 KiB 1.32 MiB/s 00:51 ETAc 55% |*******************| 87680 KiB 1.30 MiB/s 00:52 ETA283 ETA8726c 58% |********************| 91904 KiB 1.30 MiB/s 00:48 ETA289 ETAc 58% |********************| 91904 KiB 1.27 MiB/s 00:50 ETA51 ETAc 58% |********************| 91904 KiB 1.23 MiB/s 00:51 ETA1- stalled -935682 00:50 ETA61*612448 ETAc 62% |*********************| 98368 KiB 1.25 MiB/s 00:45 ETA36 ETAc 62% |*********************| 98368 KiB 1.21 MiB/s 00:47 ETA06** 102 M60 ETAc 67% |***********************| 103 MiB 1.26 MiB/s 00:39 ETA5c 67% |***********************| 103 MiB 1.23 MiB/s 00:40 ETA2c 67% |***********************| 103 MiB 1.20 MiB/s 00:41 ETA19c 67% |***********************| 103 MiB 1.18 MiB/s - stalled -79*79 00:39 ETAc 70% |************************| 108 MiB 1.19 MiB/s 00:38 ETA7c 71% |************************| 109 MiB 1.18 MiB/s 00:37 ETA1076 ETA2*c 74% |*************************| 114 MiB 1.19 MiB/s 00:33 ETA8c 74% |*************************| 114 MiB 1.16 MiB/s 00:33 ETAc 75% |**************************| 116 MiB 1.16 MiB/s 00:32 ETA58*20827 ETA81*5223 ETA3*840 ETAc 87% |****************************** | 133 MiB 1.27 MiB/s 00:15 ETA4863 ETA6c 89% |******************************* | 136 MiB 1.25 MiB/s 00:13 ETAc 89% |******************************* | 137 MiB 1.24 MiB/s 00:12 ETA908c 90% |******************************* | 139 MiB 1.24 MiB/s 00:11 ETA2c 91% |******************************* | 140 MiB 1.22 MiB/s 00:10 ETA2*109 ETAc 92% |******************************** | 142 MiB 1.22 MiB/s 00:08 ETA133447 ETA195*75 ETAc 97% |********************************* | 150 MiB 1.21 MiB/s 00:02 ETA0c 97% |********************************* | 150 MiB 1.19 MiB/s 00:02 ETA8*89290 ETA38100*76 Finished cd0(piixide0:0:1): adapter resource shortage Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4220 KiB 2.33 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA28320 KiB 4.80 M01:02 ETA3% |*10496713 ETAc3% |*| 11328 KiB 2.89 MiB/s 01:42 ETA926651 ETAc4% |*| 13696 KiB 2.31 MiB/s 02:07 ETA1417 ETAc6% |**| 19456 KiB 2.56 MiB/s 01:52 ETA840252:08 ETA20801612 ETAc7% |**| 25216 KiB 2.35 MiB/s 02:00 ETA1312 ETA8675213 ETAc9% |***| 29440 KiB 2.11 MiB/s 02:11 ETA1.9920 ETAc10% |***| 31872 KiB 1.99 MiB/s 02:18 ETA321684304024 ETA16480419 ETA2% |****8592394248723 ETA407045 ETA3307271 ETA4480052 ETA595245% |*****7936393441c16% |*****| 50816 KiB 1.80 MiB/s 02:23 ETA1200756 ETAc17% |*****| 55232 KiB 1.84 MiB/s 02:17 ETA877722 ETA8*702481 ETA9620168612 ETAc20% |*******| 65344 KiB 1.91 MiB/s 02:07 ETA8412 ETA2700169303 ETA5*88482.111:49 ETA7*85824240 ETAc 27% |*********| 87296 KiB 2.21 MiB/s 01:40 ETA93172 ETAc 29% |**********| 92672 KiB 2.24 MiB/s 01:36 ETA363198 ETA420879 ETAc 30% |**********| 95488 KiB 2.13 MiB/s 01:40 ETA02 ETAc 31% |**********| 99072 KiB 2.13 MiB/s 01:39 ETA0741 ETAc 31% |**********| 98 MiB 2.07 MiB/s 01:40 ETA2*932 ETA23 ETA3103539 ETAc 34% |***********| 105 MiB 2.03 MiB/s 01:39 ETA040 ETAc 35% |************| 108 MiB 2.03 MiB/s 01:38 ETA1.9840 ETA97c 36% |************| 111 MiB 1.97 MiB/s 01:39 ETA540 ETA762.0035 ETAc 39% |*************| 120 MiB 2.03 MiB/s 01:31 ETA102 ETA21.993 ETA41*72.0428 ETA3*33112 ETA48419 ETA6*4385 ETAc 47% |****************| 147 MiB 2.21 MiB/s 01:12 ETA881963 ETA9*5181 ETAc 50% |*****************| 156 MiB 2.22 MiB/s 01:07 ETA1708 ETA172*62206 ETAc 53% |******************| 163 MiB 2.19 MiB/s 01:05 ETA76 ETAc 55% |*******************| 169 MiB 2.22 MiB/s 01:02 ETA183 ETA7291 ETA8*80240:56 ETAc 59% |********************| 184 MiB 2.24 MiB/s 00:54 ETA35 ETAc 60% |*********************| 186 MiB 2.21 MiB/s 00:54 ETA05 ETA18194 ETA291212 ETAc 63% |**********************| 195 MiB 2.22 MiB/s 00:50 ETA05200348 ETA6*455 ETA81092 ETAc 69% |************************| 214 MiB 2.31 MiB/s 00:40 ETA271 ETA671203037 ETAc 73% |*************************| 224 MiB 2.32 MiB/s 00:35 ETA296 ETA585 ETA5*31322 ETA6531 ETAc 76% |**************************| 236 MiB 2.31 MiB/s 00:31 ETA0c 77% |**************************| 238 MiB 2.29 MiB/s 00:30 ETA8c 78% |***************************| 242 MiB 2.28 MiB/s 00:28 ETA79587 ETA82*52323 ETA5*61819 ETA7*8426 ETA8715 ETA14 ETA239386c 89% |******************************* | 274 MiB 2.35 MiB/s 00:14 ETA3510283 ETA67907684319192 ETA78051413202098643c 91% |******************************* | 283 MiB 2.02 MiB/s 00:12 ETA2*11.99471 ETA65452136700 ETA8898909 ETA4918 ETA5*37 ETA46676 ETA6755 ETA8437924 ETA1079300864133 ETA2108*692765342 ETA32145989571 ETA660 ETA100*| 3075 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA54% |******************8320 KiB 4.82 M00:01 ETA66*****101123183******27363.660 ETAc93% |******************************** | 14272 KiB 3.20 MiB/s 00:00 ETA100***| 152202.82 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAc0% || 00.00 KiB/s --:-- ETAccd0a: error reading fsbn 398132 of 398132-398147 (cd0 bn 398132; cn 3981 tn 0 sn0% || 00.00 KiB/s --:-- ETAgzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0% || 00.00 KiB/s --:-- ETACommand failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/tests.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 150, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1623, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1351, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.03.12.07.35.45/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.03.12.07.35.45/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.03.12.07.35.45/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a', '-tb-size', '128'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 23734 child_fd: 12 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11368.37 real 26.25 user 9.81 sys