This is anita version 1.44 /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.03.20.13.30.40/anita \ --structured-log-file=/bracket/i386/test/2018.03.20.13.30.40/install.slog \ --vmm-args=-tb-size 128 \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/ Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/floppy/boot-com1.fs... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/floppy/boot2.fs... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/floppy/boot3.fs... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/floppy/boot4.fs... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/floppy/boot5.fs... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/floppy/boot6.fs... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/cdrom/boot-com.iso... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/installation/misc/pxeboot_ia32.bin... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/binary/sets/modules.tgz... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/binary/sets/base.tgz... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/binary/sets/etc.tgz... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/binary/sets/comp.tgz... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/binary/sets/misc.tgz... OK Downloading file:///bracket/i386/test/2018.03.20.13.30.40/release/i386/binary/sets/tests.tgz... OK makefs -t cd9660 -o rockridge /bracket/i386/test/2018.03.20.13.30.40/anita/install_tmp.iso /bracket/i386/test/2018.03.20.13.30.40/anita/download Creating hard disk image...QEMU emulator version 2.11.1 Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.03.20.13.30.40/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.03.20.13.30.40/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.03.20.13.30.40/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -tb-size \ 128 child pid is 27511 SeaBIOS (version rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+07F915A0+07EF15A0 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-14521908\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.11.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block145): /bracket/i386/test/2018.03.20.13.30.40/anita/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback ide0-cd1 (#block332): /bracket/i386/test/2018.03.20.13.30.40/anita/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block562): /bracket/i386/test/2018.03.20.13.30.40/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[20] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.03change floppy0 /bracket/i386/test/2018.03.change floppy0 /bracket/i386/test/2018.03.2change floppy0 /bracket/i386/test/2018.03.20chan /-\|/-\|/-\|/-\|/-\|/-\|/-\|+5663236/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2018.03.20.change floppy0 /bracket/i386/test/2018.03.20.1change floppy0 /bracket/i386/test/2018.03.20.13change floppy0 /bracket/i386/test/2018.03.20.13.change floppy0 /bracket/i386/test/2018.03.20.13.3change floppy0 /bracket/i386/test/2018.03.20.13.30 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-+846012=0x140f2f4 ksyms: Symbol table not found ksyms: String table not found ksyms: Perhaps the kernel is stripped? Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.14 (INSTALL) #0: Wed Mar 21 22:59:40 UTC 2018 root@babylon5.netbsd.org:/tmp/bracket/build/2018.03.20.13.30.40-i386/obj/sys/arch/i386/compile/INSTALL total memory = 127 MB avail memory = 105 MB running cgd selftest aes-xts-256 aes-xts-512 done mainbus0 (root) ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS ) ACPI: RSDT 0x0000000007FE15FC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 0x0000000007FE1458 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 0x0000000007FE0040 001418 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) ACPI: FACS 0x0000000007FE0000 000040 ACPI: APIC 0x0000000007FE154C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 0x0000000007FE15C4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) ACPI: 1 ACPI AML tables successfully acquired and loaded ioapic0 at mainbus0 apid 0 cpu0 at mainbus0 apid 0 cpu0: QEMU Virtual CPU version 2.5+, id 0x663 cpu0: package 0, core 0, smt 0 acpi0 at mainbus0: Intel ACPICA 20171110 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 FDC0 (PNP0700) at acpi0 not configured LPT (PNP0400) at acpi0 not configured COM1 (PNP0501) at acpi0 not configured qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b apm0 at acpi0: Power Management spec V1.2 ACPI: Enabled 2 GPEs in block 00 to 0F pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0 mux 1 pms0 at pckbc1 (aux slot) pms0: Failed to get EC signature. pms0: Failed to initialize an ALPS device. pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) piixide0: primary channel interrupting at0 channel 0 piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) piixpm0: 24-bit timer piixpm0: interrupting at ioapic0 pin 9 iic0 at piixpm0: I2C bus vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1 drm at vga1 not configured wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) wm0: interrupting at ioapic0 pin 11 wm0: Ethernet address 52:54:00:12:34:56 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com0: console attimer0 at isa0 port 0x40-0x43 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 attimer0: attached to pcppi0 acpicpu0 at cpu0: ACPI CPU fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 wd0: wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 0: cdrom removable WARNING: 2 errors while detecting hardware; check system log. boot device: fd0 (st0 0xe0 cyl 0) fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/i386/8.99.14/modules clock: unknown CMOS layout warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2688 >= 2685) cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too few runs of 1 0s (2301 <= 2315) cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 46.96960 cprng kernel: failed statistical RNG test Kernel RNG "kernel" runs test FAILURE: too many runs of 5 0s (210 >= 209) cprng kernel: failed statistical RNG test Kernel RNG "kernel" poker test failure: parameter X = 46.40640 cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.14 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.14 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA56% |*******************11264 KiB 7.24 M00:01 ETA95************** | 191368.070 ETA100**| 1997010 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA11% |***5312 KiB 2.88 M00:13 ETA3% |****6144792****10496812 ETA7*228801 ETA33**529670 ETA9**772809 ETA50****227843.07 ETA8***6688115 ETA67***3078494 ETA79****5968372 ETA8**** | 4051281 ETA92* | 4198440 ETA9** | 4492823100*| 4528009 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA1216 KiB 632.2304:06 ETA472 KiB 727.613:34 ETA5% |*8704 KiB 2.38 M1:00 ETA7% |**11520620:54 ETAc11% |***| 17920 KiB 3.25 MiB/s 00:41 ETA84962.719 ETA2% |****9135353 ETAc12% |****| 20224 KiB 2.28 MiB/s 00:58 ETA101:03 ETAc13% |****| 21568 KiB 1.98 MiB/s 01:06 ETA8411 ETAc14% |****| 23296 KiB 1.80 MiB/s 01:12 ETA697 ETA7% |*****75848707 ETAc19% |******| 30912 KiB 1.95 MiB/s 01:03 ETA1360846 ETAc19% |******| 31360 KiB 1.75 MiB/s 01:10 ETA644 ETAc19% |******| 31360 KiB 1.57 MiB/s 01:17 ETA4922 ETAc20% |*******| 32768 KiB 1.49 MiB/s 01:21 ETA15 ETAc20% |*******| 32768 KiB 1.36 MiB/s 01:29 ETA033 ETAc 21% |*******| 33600 KiB 1.28 MiB/s 01:33 ETA6137 ETAc 21% |*******| 33661 KiB 1.19 MiB/s 01:40 ETA443281 ETAc 22% |*******| 35264 KiB 1.16 MiB/s 01:41 ETA3*62885c 23% |********| 36288 KiB 1.12 MiB/s 01:44 ETA088 ETA551 ETAc 24% |********| 38144 KiB 1.07 MiB/s 01:47 ETA450 ETAc 25% |********| 39616 KiB 1.05 MiB/s 01:48 ETA351 ETAc 25% |********| 39616 KiB 1.00 MiB/s 01:54 ETA0.977 ETAc 26% |*********| 41344 KiB 0.99 MiB/s 01:53 ETA994.98 K6 ETAc 27% |*********| 42944 KiB 0.99 MiB/s 01:52 ETA983.30 K6 ETAc 27% |*********| 42944 KiB 969.38 KiB/s 01:58 ETA39.252:01 ETA3968 KiB 951.781:59 ETAc 29% |**********| 46400 KiB 972.82 KiB/s 01:54 ETA60.945 ETAc 29% |**********| 46400 KiB 932.91 KiB/s 01:58 ETA22.892:00 ETAc 29% |**********| 46400 KiB 899.96 KiB/s 02:03 ETA9125.04c 30% |**********| 47680 KiB 889.28 KiB/s 02:03 ETA743 KiB 877.524 ETAc 30% |**********| 48320 KiB 870.61 KiB/s 02:05 ETA19666.83c 32% |***********| 51264 KiB 891.82 KiB/s 01:58 ETA75.962:01 ETAc 32% |***********| 51264 KiB 861.82 KiB/s 02:03 ETA47.565 ETAc 33% |***********| 52800 KiB 858.05 KiB/s 02:01 ETA45.133 ETAc 33% |***********| 52800 KiB 831.02 KiB/s 02:05 ETA17.137 ETA440827.44 ETAc 35% |************| 56064 KiB 841.45 KiB/s 02:00 ETA31.961 ETAc 35% |************| 56064 KiB 817.63 KiB/s 02:03 ETA07.155 ETAc 37% |************| 59136 KiB 838.57 KiB/s 01:57 ETA27.08 ETAc 37% |************| 59136 KiB 816.56 KiB/s 02:00 ETA03.42 ETAc 38% |*************| 60864 KiB 818.15 KiB/s 01:57 ETA04.949 ETAc 38% |*************| 60864 KiB 796.72 KiB/s 02:01 ETA84.792 ETAc 39% |*************| 62720 KiB 799.34 KiB/s 01:58 ETA88.482:00 ETAc 39% |*************| 62720 KiB 779.46 KiB/s 02:01 ETA69.233 ETAc 40% |**************| 63616 KiB 771.32 KiB/s 02:01 ETA4448480 ETA17666.36c 42% |**************| 67264 KiB 786.91 KiB/s 01:54 ETA6481.34c 42% |**************| 67648 KiB 773.65 KiB/s 01:55 ETA63.607 ETA4*9312 KiB 775.773 ETA8*75776 KiB 838.1437 ETA51*81280 KiB 889.0625 ETAc 53% |******************| 83904 KiB 906.65 KiB/s 01:21 ETA897.72c 53% |******************| 83904 KiB 887.46 KiB/s 01:22 ETA78.903 ETA458290.340 ETA8**91328 KiB 937.510 ETA938853.1506 ETA61*7024 KiB 976.771 ETAc 65% |**********************| 100 MiB 1.00 MiB/s 00:52 ETA0.993 ETA6*21 ETA851.0246 ETA70*842 ETAc 71% |************************| 110 MiB 1.04 MiB/s 00:41 ETA32 ETAc 73% |*************************| 113 MiB 1.05 MiB/s 00:38 ETA4c 74% |*************************| 114 MiB 1.04 MiB/s 00:37 ETA3c 74% |*************************| 114 MiB 1.02 MiB/s 00:37 ETA18 ETAc 75% |**************************| 116 MiB 1.02 MiB/s 00:36 ETA1c 76% |**************************| 117 MiB 1.01 MiB/s 00:35 ETA0c 76% |**************************| 118 MiB 1.00 MiB/s 00:35 ETA0.998*201.003 ETAc 79% |***************************| 121 MiB 1.00 MiB/s 00:31 ETAc 79% |***************************| 121 MiB 0.99 MiB/s 00:32 ETA8c 80% |**************************** | 123 MiB 0.98 MiB/s 00:31 ETAc 81% |**************************** | 124 MiB 0.98 MiB/s 00:29 ETA7c 81% |**************************** | 124 MiB 992.49 KiB/s 00:29 ETA88.126 MiB 992.337 ETAc 83% |***************************** | 127 MiB 994.23 KiB/s 00:26 ETA84.97 ETAc 83% |***************************** | 127 MiB 979.24 KiB/s 00:27 ETA0.65499.025 ETA6*32 MiB 993.911 ETA74 MiB 0.98 M19 ETA867 ETA9*9085 ETA94 ETAc 91% |******************************* | 140 MiB 0.98 MiB/s 00:13 ETA2*12 ETA20 ETAc 93% |******************************** | 144 MiB 0.99 MiB/s 00:09 ETA4858 ETA9** | 1521.021 ETA0 ETA31100*0Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc18% |******| 768 KiB 360.79 KiB/s 00:09 ETA27***1152 KiB 477.86 ETA100**************************| 4220 KiB 1.02 M0 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc1% || 6272 KiB 3.75 MiB/s 01:20 ETA2.5757 ETAc1% || 6272 KiB 1.70 MiB/s 02:56 ETA383:38 ETAc1% || 6272 KiB 1.10 MiB/s 04:34 ETA973.40 K5:17 ETAc1% || 6272 KiB 830.27 KiB/s - stalled -741.8328704 KiB 921.40 05:32 ETA4% |*13760 KiB 1.29 M3:46 ETAc5% |*| 15808 KiB 1.33 MiB/s 03:39 ETA2455 ETAc5% |*| 15808 KiB 1.14 MiB/s 04:16 ETA0634 ETAc5% |*| 15808 KiB 0.99 MiB/s 04:53 ETAc5% |*| 15808 KiB 957.84 KiB/s 05:12 ETA888.41- stalled -67.97% |**222 1.10 MiB/s 04:18 ETAc8% |**| 26816 KiB 1.29 MiB/s 03:37 ETA7264151 ETA03 ETA9% |***31488934 ETA10244310 ETA177604309 ETA2% |****891246 ETA34128063 ETA313692:58 ETA4524887 ETA61446 ETA5% |*****8065 ETA90276 ETA5030675168542 ETA8*98406530 ETAc 20% |*******| 64320 KiB 1.70 MiB/s 02:23 ETA685 ETAc 20% |*******| 64320 KiB 1.62 MiB/s 02:31 ETA593 ETAc 21% |*******| 68096 KiB 1.63 MiB/s 02:27 ETA030 ETA271808424 ETA4*60967116 ETA6*824805 ETA779391:57 ETAc 29% |**********| 92544 KiB 1.94 MiB/s 01:51 ETA894 ETA34403187529548 ETAc 32% |***********| 98 MiB 1.95 MiB/s 01:46 ETA18 ETAc 32% |***********| 100 MiB 1.91 MiB/s 01:47 ETA8850 ETAc 33% |***********| 102 MiB 1.88 MiB/s 01:49 ETA351 ETA340 ETA5*99044 ETAc 36% |************| 113 MiB 1.93 MiB/s 01:40 ETA01 ETAc 37% |************| 116 MiB 1.93 MiB/s 01:38 ETA8940 ETAc 37% |************| 116 MiB 1.87 MiB/s 01:42 ETA33 ETA8*724 ETA922639 ETA40*586 ETA29912 ETA3*34727 ETA5412.022 ETA7*5718 ETA9*51114 ETAc 50% |*****************| 154 MiB 2.13 MiB/s 01:11 ETA093 ETAc 50% |*****************| 155 MiB 2.09 MiB/s 01:12 ETA653 ETAc 50% |*****************| 156 MiB 2.04 MiB/s 01:14 ETA05 ETAc 53% |******************| 164 MiB 2.06 MiB/s 01:09 ETA310 ETA6409 ETA6*73103 ETAc 58% |********************| 180 MiB 2.16 MiB/s 00:58 ETA9253c 60% |*********************| 186 MiB 2.15 MiB/s 00:56 ETA27 ETA1835 ETAc 61% |*********************| 189 MiB 2.11 MiB/s 00:56 ETA09c 63% |**********************| 194 MiB 2.12 MiB/s 00:53 ETA094 ETA53 ETA52031548 ETAc 67% |***********************| 206 MiB 2.16 MiB/s 00:46 ETA37 ETAc 67% |***********************| 208 MiB 2.13 MiB/s 00:46 ETA17 ETA81025 ETA71*2939 ETA2*4217 ETAc 74% |*************************| 229 MiB 2.24 MiB/s 00:34 ETA3015 ETA06*532 ETA8*41629 ETA80*7306 ETAc 81% |**************************** | 252 MiB 2.32 MiB/s 00:23 ETA294 ETA24303 ETA5*62519 ETA7*996 ETA87185 ETA24 ETA369*455323 ETA602990788752 ETA942180191861532020986543212*01.9947651 ETA4526037890 ETAc 93% |******************************** | 287 MiB 1.88 MiB/s 00:10 ETA87c 93% |******************************** | 288 MiB 1.87 MiB/s 00:10 ETA9549009 ETAc 94% |******************************** | 292 MiB 1.85 MiB/s 00:08 ETA4c 95% |********************************* | 294 MiB 1.84 MiB/s 00:07 ETA3526 ETA61c 96% |********************************* | 296 MiB 1.80 MiB/s 00:06 ETA779875 ETA8657934 ETA21300068173 ETA68*523203582 ETA76544219601 ETA7490 ETA100* Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETAc23% |********| 3584 KiB 1.76 MiB/s 00:06 ETA1c23% |********| 3584 KiB 902.94 KiB/s 00:12 ETA885.113 ETAc23% |********| 3584 KiB 602.31 KiB/s 00:19 ETA590.40c23% |********| 3584 KiB 454.15 KiB/s - stalled -40.20ccd0a: error reading fsbn 342432 of 342432-342559 (cd0 bn 342432; cn 3424 tn 0 sn23% |********| 3584 KiB 364.86 KiB/s - stalled -51.27c23% |********| 3584 KiB 303.11 KiB/s - stalled -293.43c23% |********| 3584 KiB 260.55 KiB/s - stalled -51.06c 23% |********| 3584 KiB 229.50 KiB/s - stalled -17.52c cd0a: error reading fsbn 342560 of 342560-342687 (cd0 bn 342560; cn 3425 tn 0 sn 23% |********| 3584 KiB 204.95 KiB/s - stalled -193.43c 23% |********| 3584 KiB 183.90 KiB/s - stalled -74.58c 23% |********| 3584 KiB 167.16 KiB/s - stalled -58.72c 23% |********| 3584 KiB 152.89 KiB/s - stalled -45.91c cd0a: error reading fsbn 342688 of 342688-342815 (cd0 bn 342688; cn 3426 tn 0 sn 23% |********| 3584 KiB 141.09 KiB/s - stalled -34.57c 25% |********| 3840 KiB 140.74 KiB/s 01:20 ETA33.55 ETAc 25% |********| 3840 KiB 131.44 KiB/s 01:26 ETA24.5731 ETAc 25% |********| 3840 KiB 123.21 KiB/s 01:32 ETA16.90- stalled -c 25% |********| 3840 KiB 115.98 KiB/s - stalled -c cd0a: error reading fsbn 342592 of 342592-342607 (cd0 bn 342592; cn 3425 tn 0 sn 25% |******** | 3840 KiB 110.00 KiB/s - stalled - gzip: failed to read stdin: Device busy tar: End of archive volume 1 reachedtar: Unexpected EOF on archive file 25% |******** | 3840 KiB 109.85 KiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/misc.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 150, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1623, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1351, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.03.20.13.30.40/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.03.20.13.30.40/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.03.20.13.30.40/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a', '-tb-size', '128'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 27511 child_fd: 12 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11421.59 real 33.53 user 9.19 sys