This is anita version 1.44 /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.06.01.01.21.02/anita \ --structured-log-file=/bracket/i386/test/2018.06.01.01.21.02/install.slog \ --vmm-args=-tb-size 128 \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/ Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/floppy/boot-com1.fs... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/floppy/boot2.fs... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/floppy/boot3.fs... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/floppy/boot4.fs... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/floppy/boot5.fs... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/floppy/boot6.fs... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/cdrom/boot-com.iso... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/installation/misc/pxeboot_ia32.bin... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/binary/sets/modules.tgz... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/binary/sets/base.tgz... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/binary/sets/etc.tgz... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/binary/sets/comp.tgz... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/binary/sets/misc.tgz... OK Downloading file:///bracket/i386/test/2018.06.01.01.21.02/release/i386/binary/sets/tests.tgz... OK makefs -t cd9660 -o rockridge /bracket/i386/test/2018.06.01.01.21.02/anita/install_tmp.iso /bracket/i386/test/2018.06.01.01.21.02/anita/download Creating hard disk image...QEMU emulator version 2.11.1 Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.06.01.01.21.02/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.06.01.01.21.02/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.06.01.01.21.02/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -tb-size \ 128 child pid is 22793 SeaBIOS (version rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+07F915A0+07EF15A0 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-14585712\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.11.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block126): /bracket/i386/test/2018.06.01.01.21.02/anita/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback ide0-cd1 (#block399): /bracket/i386/test/2018.06.01.01.21.02/anita/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block545): /bracket/i386/test/2018.06.01.01.21.02/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[20] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/t -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...Dchange floppy0 /bracket/i386/techange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...Dchange floppy0 /bracket/i386/test/2018change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.06change floppy0 /bracket/i386/test/2018.06.change floppy0 /bracket/i386/test/2018.06.0change floppy0 /brack |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...et/i386/test/2018.06.01change floppy0 /bracket/i386/test/2018.06.01.change floppy0 /bracket/i386/test/2018.06.01.0change floppy0 /bracket/i386/test/2018.06.01.01change floppy0 /bracket/i386/test/2018.06.01.01.change floppy0 /bracket/i386/test/2018.06.01.01.2 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+5663492\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...[Dchange floppy0 /bracket/i386/test/2018.06.01.01.21change floppy0 /bracket/i386/test/2018.06.01.01.21.change floppy0 /bracket/i386/test/2018.06.01.01.21.0change floppy0 /bracket/i386/test/2018.06.01.01.21.02change floppy0 /bracket/i386/test/2018.06.01.01.21.02/ -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+849788=0x141f2b4 [ 1.0000000] ksyms: Symbol table not found [ 1.0000000] ksyms: String table not found [ 1.0000000] ksyms: Perhaps the kernel is stripped? [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.19 (INSTALL) #0: Fri Jun 1 03:20:47 UTC 2018 [ 1.0000000] root@babylon5.netbsd.org:/tmp/bracket/build/2018.06.01.01.21.02-i386/obj/sys/arch/i386/compile/INSTALL [ 1.0000000] total memory = 127 MB [ 1.0000000] avail memory = 105 MB [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS ) [ 1.0000030] ACPI: RSDT 0x0000000007FE15FC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACP 0x0000000007FE1458 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 1.0000030] ACPI: DSDT 0x0000000007FE0040 001418 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACS 0x0000000007FE0000 000040 [ 1.0000030] ACPI: APIC 0x0000000007FE154C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 1.0000030] ACPI: HPET 0x0000000007FE15C4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000030] ioapic0 at mainbus0 apid 0 [ 1.0000030] cpu0 at mainbus0 apid 0 [ 1.0000030] cpu0: QEMU Virtual CPU version 2.5+, id 0x663 [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180427 [ 1.0000030] acpi0: fixed power button present [ 1.0206704] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0236311] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0236311] pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 [ 1.0236311] FDC0 (PNP0700) at acpi0 not configured [ 1.0236311] LPT (PNP0400) at acpi0 not configured [ 1.0236311] COM1 (PNP0501) at acpi0 not configured [ 1.0236311] qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b [ 1.0236311] apm0 at acpi0: Power Management spec V1.2 [ 1.0236311] ACPI: Enabled 2 GPEs in block 00 to 0F [ 1.0236311] pckbd0 at pckbc1 (kbd slot) [ 1.0236311] pckbc1: using irq 1 for kbd slot [ 1.0236311] wskbd0 at pckbd0 mux 1 [ 1.0236311] pms0 at pckbc1 (aux slot) [ 1.0236311] pms0: Failed to get EC signature. [ 1.0236311] pms0: Failed to initialize an ALPS device. [ 1.0236311] pckbc1: using irq 12 for aux slot [ 1.0236311] wsmouse0 at pms0 mux 0 [ 1.0236311] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0236311] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.0236311] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.0236311] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.0236311] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.0236311] atabus0 at piixide0 channel 0 [ 1.0236311] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.0236311] atabus1 at piixide0 channel 1 [ 1.0236311] piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) [ 1.0236311] piixpm0: 24-bit timer [ 1.0236311] piixpm0: interrupting at ioapic0 pin 9 [ 1.0236311] iic0 at piixpm0: I2C bus [ 1.0236311] vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) [ 1.0236311] wsdisplay0 at vga1 kbdmux 1 [ 1.0236311] drm at vga1 not configured [ 1.0236311] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0236311] wm0: interrupting at ioapic0 pin 11 [ 1.0236311] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0236311] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0236311] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0236311] isa0 at pcib0 [ 1.0236311] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.0236311] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.0236311] com0: console [ 1.0236311] attimer0 at isa0 port 0x40-0x43 [ 1.0236311] pcppi0 at isa0 port 0x61 [ 1.0236311] midi0 at pcppi0: PC speaker [ 1.0236311] sysbeep0 at pcppi0 [ 1.0236311] isapnp0 at isa0 port 0x279 [ 1.0236311] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0236311] attimer0: attached to pcppi0 [ 1.0236311] acpicpu0 at cpu0: ACPI CPU [ 1.1841762] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.1841762] atapibus0 at atabus0: 2 targets [ 1.2034034] cd0 at atapibus0 drive 1: cdrom removable [ 1.2034034] wd0 at atabus0 drive 0 [ 1.2833946] wd0: [ 1.2833946] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 7.3166665] atapibus1 at atabus1: 2 targets [ 7.3166665] cd1 at atapibus1 drive 0: cdrom removable [ 7.3493490] WARNING: 2 errors while detecting hardware; check system log. [ 7.3493490] boot device: fd0 [ 15.8928339] (st0 0xe0 cyl 0) [ 15.8928339] fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) [ 16.1729869] root on md0a dumps on md0b [ 16.1729869] root file system type: ffs [ 16.1729869] kern.module.path=/stand/i386/8.99.19/modules [ 16.1907662] clock: unknown CMOS layout [ 16.2030070] warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) [ 19.1050603] Kernel RNG "kernel" monobit test FAILURE: 9716 ones [ 19.1050603] cprng kernel: failed statistical RNG test [ 25.8982865] Kernel RNG "kernel" runs test FAILURE: too many runs of 3 1s (724 >= 723) [ 25.8982865] cprng kernel: failed statistical RNG test [ 29.5702656] Kernel RNG "kernel" long run test FAILURE: Run of 26 1s found [ 29.5702656] cprng kernel: failed statistical RNG test [ 29.6503275] Kernel RNG "kernel" runs test FAILURE: too few runs of 3 0s (526 <= 527) [ 29.6503275] cprng kernel: failed statistical RNG test [ 33.2722346] Kernel RNG "kernel" poker test failure: parameter X = 1.99040 [ 33.2722346] cprng kernel: failed statistical RNG test [ 41.6367707] Kernel RNG "kernel" runs test FAILURE: too many runs of 4 1s (386 >= 384) [ 41.6367707] cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.19 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.19 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA48% |****************9792 KiB 6.10 M00:01 ETA71********1433630 ETA100***********| 2006048 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA16% |*****6912 KiB 4.00 M00:08 ETA21**9280147 ETA34****14656086 ETA43****824075 ETA5***22784124 ETA64****739263 ETA73***3116822 ETA82***48803.991 ETA90***833680 ETA10****| 42320587 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA5% |*9920 KiB 6.66 M00:22 ETA8% |**14272253 ETA[11% |***| 18432 KiB 4.95 MiB/s 00:29 ETA0835 ETA[12% |****| 21568 KiB 3.78 MiB/s 00:37 ETA2643 ETA[12% |****| 21568 KiB 2.80 MiB/s 00:50 ETA477 ETA[15% |*****| 25664 KiB 2.65 MiB/s 00:51 ETA367 ETA[17% |*****| 28288 KiB 2.43 MiB/s 00:55 ETA480191:01 ETA8*9952200 ETA[19% |******| 32000 KiB 2.13 MiB/s 01:01 ETA896092 ETA[21% |*******| 35840 KiB 2.10 MiB/s 01:00 ETA013 ETA[21% |*******| 35840 KiB 1.87 MiB/s 01:07 ETA010 ETA[23% |********| 38272 KiB 1.83 MiB/s 01:08 ETA7212 ETA[ 25% |********| 41920 KiB 1.83 MiB/s 01:06 ETA7210 ETA[ 25% |********| 41920 KiB 1.68 MiB/s 01:12 ETA596 ETA6*35614 ETA[ 28% |*********| 47552 KiB 1.68 MiB/s 01:08 ETA211 ETA[ 31% |**********| 51904 KiB 1.72 MiB/s 01:04 ETA2*3312695 ETA[ 32% |***********| 54016 KiB 1.68 MiB/s 01:05 ETA3523246064[ 34% |***********| 57728 KiB 1.62 MiB/s 01:05 ETA596 ETA[ 36% |************| 60736 KiB 1.62 MiB/s 01:03 ETA1184594 ETA8*3488612 ETA[ 40% |**************| 67072 KiB 1.66 MiB/s 00:58 ETA01:00 ETA[ 40% |**************| 67328 KiB 1.59 MiB/s 01:00 ETA9232 ETA[ 40% |**************| 67421 KiB 1.52 MiB/s 01:03 ETA1956812 ETA[ 41% |**************| 69568 KiB 1.50 MiB/s 01:02 ETA455 ETA[ 42% |**************| 70784 KiB 1.46 MiB/s 01:03 ETA3*21924768[ 46% |****************| 77952 KiB 1.48 MiB/s 00:58 ETA7[ 46% |****************| 77952 KiB 1.43 MiB/s 01:00 ETA1[ 48% |****************| 80576 KiB 1.42 MiB/s 00:58 ETA19 ETA[ 48% |****************| 80576 KiB 1.37 MiB/s 01:00 ETA61 ETA50*40990:57 ETA[ 52% |******************| 87168 KiB 1.42 MiB/s 00:54 ETA395 ETA[ 54% |******************| 90560 KiB 1.43 MiB/s 00:51 ETA5*196820 ETA[ 55% |*******************| 91968 KiB 1.40 MiB/s 00:51 ETA382 ETA29921 ETA[ 58% |********************| 96832 KiB 1.41 MiB/s 00:48 ETA39[ 60% |*********************| 99968 KiB 1.41 MiB/s 00:45 ETA396 ETA[ 61% |*********************| 99 MiB 1.40 MiB/s 00:44 ETA21013 ETA3*311 ETA[ 64% |**********************| 105 MiB 1.42 MiB/s 00:39 ETA5140 ETA[ 68% |***********************| 110 MiB 1.46 MiB/s 00:35 ETA9*33 ETA[ 69% |************************| 113 MiB 1.45 MiB/s 00:33 ETA34 ETA1[ 71% |************************| 116 MiB 1.43 MiB/s 00:31 ETA22 ETA[ 73% |*************************| 119 MiB 1.43 MiB/s 00:29 ETA230 ETA[ 73% |*************************| 119 MiB 1.41 MiB/s 00:30 ETA[ 73% |*************************| 119 MiB 1.39 MiB/s 00:30 ETA7[ 73% |************************* | 119 MiB 1.35 MiB/s 00:31 ETA 42- stalled -6*236 00:28 ETA[ 79% |***************************| 129 MiB 1.40 MiB/s 00:23 ETA38[ 80% |**************************** | 130 MiB 1.39 MiB/s 00:22 ETA1281 ETA34*64118 ETA[ 86% |****************************** | 141 MiB 1.43 MiB/s 00:14 ETA8353 ETA9*51 ETA[ 90% |******************************* | 146 MiB 1.45 MiB/s 00:11 ETA1809 ETA2*98 ETA35167 ETA[ 94% |******************************** | 153 MiB 1.45 MiB/s 00:06 ETA7*8502 ETA9* | 1610 ETA248764100*3Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[7% |**| 320 KiB 162.15 KiB/s 00:23 ETA57.494 ETA100% |***********************************| 421 1.24 M00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[2% || 7488 KiB 4.36 MiB/s 01:13 ETA3.1442 ETA3% |*122245728 ETA[5% |*| 16896 KiB 3.36 MiB/s 01:33 ETA959246 ETA[5% |*| 17088 KiB 2.42 MiB/s 02:09 ETA3413 ETA6% |**225925301 ETA7553671:51 ETA[8% |**| 30080 KiB 2.75 MiB/s 01:49 ETA3366154 ETA[10% |***| 35264 KiB 2.72 MiB/s 01:48 ETA5205953 ETA[10% |***| 35968 KiB 2.41 MiB/s 02:01 ETA18840[11% |***| 39360 KiB 2.36 MiB/s 02:03 ETA404482210 ETA164 ETA[12% |****| 43072 KiB 2.12 MiB/s 02:15 ETA52006 ETA[14% |****| 48000 KiB 2.14 MiB/s 02:11 ETA3222 ETA[ 14% |****| 49088 KiB 2.02 MiB/s 02:19 ETA1.9623 ETA[ 15% |*****| 52160 KiB 1.98 MiB/s 02:20 ETA34 ETA[ 15% |*****| 52160 KiB 1.84 MiB/s 02:31 ETA795 ETA67216824 ETA8*613129816 ETA[ 21% |*******| 71424 KiB 2.21 MiB/s 01:57 ETA61142:00 ETA[ 21% |*******| 71461 KiB 2.08 MiB/s 02:04 ETA87246 ETA2552073 ETA[ 24% |********| 82496 KiB 2.21 MiB/s 01:52 ETA54480183 ETA[ 25% |********| 84480 KiB 2.15 MiB/s 01:54 ETA078 ETA86459 ETA[ 25% |********| 87744 KiB 2.05 MiB/s 01:58 ETA6*825639 ETA[ 27% |*********| 93824 KiB 2.10 MiB/s 01:52 ETA84912074 ETA721692 ETA30* 100 M1546 ETA[ 31% |**********| 103 MiB 2.18 MiB/s 01:43 ETA[ 31% |**********| 103 MiB 2.13 MiB/s 01:45 ETA2*663 ETA[ 32% |***********| 107 MiB 2.11 MiB/s 01:45 ETA096 ETA[ 33% |***********| 110 MiB 2.09 MiB/s 01:45 ETA56 ETA27 ETA5*6101 ETA[ 36% |************| 120 MiB 2.12 MiB/s 01:38 ETA099 ETA74136 ETA9*862 ETA40*3280 ETA182524 ETA[ 43% |***************| 141 MiB 2.26 MiB/s 01:22 ETA233 ETA47819 ETA6*53345 ETA[ 47% |****************| 157 MiB 2.35 MiB/s 01:13 ETA24 ETA[ 47% |****************| 157 MiB 2.28 MiB/s 01:15 ETA66 ETA86074 ETA9*392 ETA5073109 ETA17028 ETA[ 52% |******************| 173 MiB 2.32 MiB/s 01:07 ETA29[ 52% |******************| 173 MiB 2.26 MiB/s 01:08 ETA49 ETA4876 ETA[ 55% |*******************| 184 MiB 2.31 MiB/s 01:02 ETA660[ 56% |******************* | 186 MiB 2.29 MiB/s 01:02 ETA 53 ETA34 ETA[ 58% |********************| 193 MiB 2.28 MiB/s 00:59 ETA6[ 58% |********************| 193 MiB 2.23 MiB/s 01:00 ETA11 ETA[ 59% |********************| 197 MiB 2.22 MiB/s 00:59 ETA161*20127 ETA436 ETA[ 62% |*********************| 207 MiB 2.24 MiB/s 00:54 ETA15 ETA[ 63% |**********************| 210 MiB 2.22 MiB/s 00:53 ETA04 ETA[ 63% |**********************| 210 MiB 2.18 MiB/s 00:54 ETA55 ETA4373 ETA[ 66% |***********************| 218 MiB 2.19 MiB/s 00:50 ETA71 ETA[ 66% |***********************| 218 MiB 2.14 MiB/s 00:51 ETA32 ETA[ 67% |***********************| 222 MiB 2.14 MiB/s 00:49 ETA350 ETA[ 67% |***********************| 222 MiB 2.10 MiB/s 00:50 ETA091 ETA[ 68% |***********************| 227 MiB 2.11 MiB/s 00:48 ETA9*09[ 69% |************************| 227 MiB 2.08 MiB/s 00:48 ETA69 ETA958 ETA[ 71% |************************| 235 MiB 2.09 MiB/s 00:44 ETA675 ETA74 ETA4*461338 ETA7*5484 ETA[ 79% |***************************| 262 MiB 2.23 MiB/s 00:29 ETA130 ETA[ 79% |***************************| 262 MiB 2.20 MiB/s 00:30 ETA1780*6928 ETA[ 81% |**************************** | 269 MiB 2.19 MiB/s 00:27 ETA8[ 81% |**************************** | 269 MiB 2.16 MiB/s 00:27 ETA5[ 82% |**************************** | 273 MiB 2.15 MiB/s 00:26 ETA4[ 82% |**************************** | 273 MiB 2.12 MiB/s 00:26 ETA0[ 83% |***************************** | 276 MiB 2.11 MiB/s 00:25 ETA0[ 83% |***************************** | 276 MiB 2.08 MiB/s 00:25 ETA7494 ETA6*86110 ETA[ 87% |****************************** | 289 MiB 2.12 MiB/s 00:18 ETA09 ETA89217 ETA9*30[ 89% |******************************* | 294 MiB 2.09 MiB/s 00:16 ETA586769055 ETA74[ 90% |******************************* | 298 MiB 2.03 MiB/s 00:15 ETA29104 ETA[ 91% |******************************* | 300 MiB 1.99 MiB/s 00:14 ETA8[ 91% |******************************* | 300 MiB 1.97 MiB/s 00:14 ETA165322138982*73 ETA645[ 92% |******************************** | 304 MiB 1.85 MiB/s 00:13 ETA4[ 92% |******************************** | 305 MiB 1.83 MiB/s 00:13 ETA2107986765432[ 93% |******************************** | 308 MiB 1.71 MiB/s 00:12 ETA91 ETA4100[ 94% |******************************** | 312 MiB 1.69 MiB/s 00:10 ETA37009 ETA5*69[ 95% |********************************* | 314 MiB 1.68 MiB/s 00:08 ETA6[ 96% |********************************* | 317 MiB 1.68 MiB/s 00:07 ETA876 ETA6955 ETA72043[ 97% |********************************* | 321 MiB 1.62 MiB/s 00:05 ETA1[ 97% |********************************* | 321 MiB 1.61 MiB/s 00:04 ETA02598738*653 ETA443210495872 ETA6546392711 ETA80 ETA0100*| 329 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA44% |***************6848 KiB 4.19 M00:01 ETA53***81923.402 ETA75********11456121 ETA83***26722.910 ETA90**38244210****| 152303 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA14% |****4992 KiB 3.02 M00:09 ETA6*58242.312 ETA9521.756 ETA20**742457 ETA3*83204934***12096802 ETA5*672683 ETA9*395058*******208002.1506 ETA67***40225 ETA[75% |**************************| 26752 KiB 2.28 MiB/s 00:03 ETA[79% |***************************| 28224 KiB 2.18 MiB/s 00:03 ETA051.8680*608391*** | 3251291 ETA[94% |******************************** | 33408 KiB 1.89 MiB/s 00:01 ETA[97% |********************************* | 34624 KiB 1.79 MiB/s 00:00 ETA6[97% |********************************* | 34624 KiB 1.62 MiB/s 00:00 ETA59[97% |********************************* | 34624 KiB 1.47 MiB/s 00:00 ETA6[[ 473.3108096] cd0a: error reading fsbn 437280 of 437280-437407 (cd0 bn 437280;97% |********************************* | 34624 KiB 1.35 MiB/s - stalled -4[ 97% |********************************* | 34624 KiB 1.25 MiB/s - stalled -4[ 97% |********************************* | 34624 KiB 1.17 MiB/s - stalled -6[ 97% |********************************* | 34624 KiB 1.09 MiB/s - stalled -8[ [ 481.3451252] cd0a: error reading fsbn 437408 of 437408-437535 (cd0 bn 437408; 97% |********************************* | 34624 KiB 1.02 MiB/s - stalled -1[ 97% |********************************* | 34624 KiB 993.20 KiB/s - stalled - 85.36[ 97% |********************************* | 34624 KiB 938.58 KiB/s - stalled -3.57[ 97% |********************************* | 34624 KiB 889.42 KiB/s - stalled -5.78[ [ 489.3377275] cd0a: error reading fsbn 437536 of 437536-437663 (cd0 bn 437536; 97% |********************************* | 34624 KiB 845.52 KiB/s - stalled -3.05[ 97% |********************************* | 34624 KiB 806.32 KiB/s - stalled -3.70[ 97% |********************************* | 34624 KiB 770.95 KiB/s - stalled -67.68[ 97% |********************************* | 34624 KiB 738.04 KiB/s - stalled -5.23[ [ 497.3647841] cd0a: error reading fsbn 437664 of 437664-437791 (cd0 bn 437664; 97% |********************************* | 34624 KiB 708.10 KiB/s - stalled -4.68[ 97% |********************************* | 34624 KiB 680.56 KiB/s - stalled - 76.97[ 97% |********************************* | 34624 KiB 652.83 KiB/s - stalled - 29.58[ 97% |********************************* | 34624 KiB 628.20 KiB/s - stalled - 08.65[ [ 505.6443952] cd0a: error reading fsbn 437280 of 437280-437295 (cd0 bn 437280; 97% |********************************* | 34624 KiB 605.98 KiB/s - stalled - gzip: failed to read stdin: Device busy tar: End of archive volume 1 reachedtar: Unexpected EOF on archive file 97% |********************************* | 34624 KiB 603.56 KiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/tests.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 150, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1623, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1351, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.06.01.01.21.02/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.06.01.01.21.02/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.06.01.01.21.02/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a', '-tb-size', '128'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 22793 child_fd: 14 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11427.18 real 30.00 user 10.22 sys