This is anita version 1.44 /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.06.23.11.54.06/anita \ --structured-log-file=/bracket/i386/test/2018.06.23.11.54.06/install.slog \ --vmm-args=-tb-size 128 \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/ Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/floppy/boot-com1.fs... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/floppy/boot2.fs... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/floppy/boot3.fs... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/floppy/boot4.fs... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/floppy/boot5.fs... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/floppy/boot6.fs... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/cdrom/boot-com.iso... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/installation/misc/pxeboot_ia32.bin... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/binary/sets/modules.tgz... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/binary/sets/base.tgz... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/binary/sets/etc.tgz... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/binary/sets/comp.tgz... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/binary/sets/misc.tgz... OK Downloading file:///bracket/i386/test/2018.06.23.11.54.06/release/i386/binary/sets/tests.tgz... OK makefs -t cd9660 -o rockridge /bracket/i386/test/2018.06.23.11.54.06/anita/install_tmp.iso /bracket/i386/test/2018.06.23.11.54.06/anita/download Creating hard disk image...QEMU emulator version 2.11.1 Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.06.23.11.54.06/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.06.23.11.54.06/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.06.23.11.54.06/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -tb-size \ 128 child pid is 28878 SeaBIOS (version rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+07F915A0+07EF15A0 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-14765848\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.11.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block123): /bracket/i386/test/2018.06.23.11.54.06/anita/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback ide0-cd1 (#block391): /bracket/i386/test/2018.06.23.11.54.06/anita/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block521): /bracket/i386/test/2018.06.23.11.54.06/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[20] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.06change floppy0 /bracket/i386/test/2018.06.change floppy0 /bracket/i386/test/2018.06.2change floppy0 /bracket/i386/test/2018.06.23chan /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+5495236\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2018.06.23.change floppy0 /bracket/i386/test/2018.06.23.1change floppy0 /bracket/i386/test/2018.06.23.11change floppy0 /bracket/i386/test/2018.06.23.11.change floppy0 /bracket/i386/test/2018.06.23.11.5change floppy0 /bracket/i386/test/2018.06.23.11.54 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+849788=0x1422174 [ 1.0000000] ksyms: Symbol table not found [ 1.0000000] ksyms: String table not found [ 1.0000000] ksyms: Perhaps the kernel is stripped? [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.19 (INSTALL) #0: Sat Jun 23 14:26:52 UTC 2018 [ 1.0000000] root@babylon5.netbsd.org:/tmp/bracket/build/2018.06.23.11.54.06-i386/obj/sys/arch/i386/compile/INSTALL [ 1.0000000] total memory = 127 MB [ 1.0000000] avail memory = 105 MB [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS ) [ 1.0000030] ACPI: RSDT 0x0000000007FE15FC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACP 0x0000000007FE1458 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 1.0000030] ACPI: DSDT 0x0000000007FE0040 001418 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACS 0x0000000007FE0000 000040 [ 1.0000030] ACPI: APIC 0x0000000007FE154C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 1.0000030] ACPI: HPET 0x0000000007FE15C4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000030] ioapic0 at mainbus0 apid 0 [ 1.0000030] cpu0 at mainbus0 apid 0 [ 1.0000030] cpu0: QEMU Virtual CPU version 2.5+, id 0x663 [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180427 [ 1.0000030] acpi0: fixed power button present [ 1.0313528] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0357349] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0357349] pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 [ 1.0357349] FDC0 (PNP0700) at acpi0 not configured [ 1.0357349] LPT (PNP0400) at acpi0 not configured [ 1.0357349] COM1 (PNP0501) at acpi0 not configured [ 1.0357349] qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b [ 1.0357349] apm0 at acpi0: Power Management spec V1.2 [ 1.0357349] ACPI: Enabled 2 GPEs in block 00 to 0F [ 1.0357349] pckbd0 at pckbc1 (kbd slot) [ 1.0357349] pckbc1: using irq 1 for kbd slot [ 1.0357349] wskbd0 at pckbd0 mux 1 [ 1.0357349] pms0 at pckbc1 (aux slot) [ 1.0357349] pckbc1: using irq 12 for aux slot [ 1.0357349] wsmouse0 at pms0 mux 0 [ 1.0357349] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0357349] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.0357349] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.0357349] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.0357349] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.0357349] atabus0 at piixide0 channel 0 [ 1.0357349] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.0357349] atabus1 at piixide0 channel 1 [ 1.0357349] piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) [ 1.0357349] piixpm0: 24-bit timer [ 1.0357349] piixpm0: interrupting at ioapic0 pin 9 [ 1.0357349] iic0 at piixpm0: I2C bus [ 1.0357349] vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) [ 1.0357349] wsdisplay0 at vga1 kbdmux 1 [ 1.0357349] drm at vga1 not configured [ 1.0357349] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0357349] wm0: interrupting at ioapic0 pin 11 [ 1.0357349] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0357349] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0357349] wm0: MDIC write error: phy 1 reg 22 [ 1.0357349] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0357349] isa0 at pcib0 [ 1.0357349] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.0357349] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.0357349] com0: console [ 1.0357349] attimer0 at isa0 port 0x40-0x43 [ 1.0357349] pcppi0 at isa0 port 0x61 [ 1.0357349] midi0 at pcppi0: PC speaker [ 1.0357349] sysbeep0 at pcppi0 [ 1.0357349] isapnp0 at isa0 port 0x279 [ 1.0357349] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0357349] attimer0: attached to pcppi0 [ 1.0357349] acpicpu0 at cpu0: ACPI CPU [ 1.3605445] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.3798169] atapibus0 at atabus0: 2 targets [ 1.3798169] cd0 at atapibus0 drive 1: cdrom removable [ 1.3998003] wd0 at atabus0 drive 0 [ 1.3998003] wd0: [ 1.3998003] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 7.5093755] atapibus1 at atabus1: 2 targets [ 7.5093755] cd1 at atapibus1 drive 0: cdrom removable [ 7.5415026] boot device: fd0 [ 16.0840306] (st0 0xe0 cyl 0) [ 16.0840306] fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) [ 16.3742226] root on md0a dumps on md0b [ 16.3742226] root file system type: ffs [ 16.3742226] kern.module.path=/stand/i386/8.99.19/modules [ 16.3742226] clock: unknown CMOS layout [ 16.4148718] warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) [ 24.7887796] Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2686 >= 2685) [ 24.7887796] cprng kernel: failed statistical RNG test [ 27.0006743] Kernel RNG "kernel" poker test failure: parameter X = 2.1600 [ 27.0006743] cprng kernel: failed statistical RNG test [ 27.7003536] Kernel RNG "kernel" poker test failure: parameter X = 1.99040 [ 27.7003536] cprng kernel: failed statistical RNG test [ 31.0521494] Kernel RNG "kernel" runs test FAILURE: too many runs of 6 1s (216 >= 209) [ 31.0521494] cprng kernel: failed statistical RNG test [ 35.1081044] Kernel RNG "kernel" runs test FAILURE: too many runs of 4 1s (385 >= 384) [ 35.1081044] cprng kernel: failed statistical RNG test [ 37.2592492] Kernel RNG "kernel" monobit test FAILURE: 10275 ones [ 37.2592492] cprng kernel: failed statistical RNG test [ 37.3392965] Kernel RNG "kernel" runs test FAILURE: too few runs of 1 0s (2308 <= 2315) [ 37.3392965] cprng kernel: failed statistical RNG test [ 42.0529349] Kernel RNG "kernel" long run test FAILURE: Run of 27 0s found [ 42.0529349] cprng kernel: failed statistical RNG test [ 46.3553099] Kernel RNG "kernel" poker test failure: parameter X = 48.14720 [ 46.3553099] cprng kernel: failed statistical RNG test [ 50.1879779] Kernel RNG "kernel" runs test FAILURE: too few runs of 1 1s (2305 <= 2315) [ 50.1879779] cprng kernel: failed statistical RNG test [ 52.5791117] Kernel RNG "kernel" runs test FAILURE: too many runs of 5 0s (209 >= 209) [ 52.5791117] cprng kernel: failed statistical RNG test [ 53.2790628] Kernel RNG "kernel" runs test FAILURE: too many runs of 6 1s (213 >= 209) [ 53.2790628] cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.19 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.19 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA58% |********************11712 KiB 7.74 M00:01 ETA9************** | 197768.210 ETA100*| 2007015 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA16% |*****6848 KiB 4.17 M00:08 ETA22**93443.9831***1350757 ETA9***6726 ETA50****21248855 ETA6****5792934 ETA8**8864773 ETA75***31872682 ETA82**4816599***76931 ETA96** | 40832480 ETA100**| 4233034 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[4% |*| 7872 KiB 5.08 MiB/s 00:30 ETA3.0450 ETA[4% |*| 7872 KiB 2.19 MiB/s 01:10 ETA1.7229 ETA6% |**113282.0414 ETA9% |***61520:58 ETA[11% |***| 18432 KiB 2.32 MiB/s 01:02 ETA176 ETA[11% |***| 18432 KiB 1.84 MiB/s 01:18 ETA7522 ETA[12% |****| 21568 KiB 1.81 MiB/s 01:18 ETA6923 ETA[15% |*****| 26304 KiB 1.91 MiB/s 01:11 ETA6816796 ETA[17% |*****| 29568 KiB 1.88 MiB/s 01:11 ETA824746 ETA[17% |*****| 29824 KiB 1.67 MiB/s 01:19 ETA5525 ETA[17% |*****| 29824 KiB 1.50 MiB/s 01:28 ETA4134 ETA8*3104023 ETA[ 21% |*******| 35392 KiB 1.52 MiB/s 01:23 ETA476 ETA[ 21% |*******| 36032 KiB 1.42 MiB/s 01:29 ETA633832 ETA[ 21% |*******| 36095 KiB 1.32 MiB/s 01:36 ETA2763244 ETA[ 24% |********| 41472 KiB 1.41 MiB/s 01:26 ETA379 ETA[ 24% |********| 41472 KiB 1.32 MiB/s 01:32 ETA285 ETA526884 ETA[ 28% |*********| 47104 KiB 1.34 MiB/s 01:26 ETA37 ETA[ 30% |**********| 50176 KiB 1.35 MiB/s 01:23 ETA20744 ETA[ 30% |**********| 50560 KiB 1.29 MiB/s 01:27 ETA68888 ETA13312304 ETA3*55531 ETA[ 35% |************| 59200 KiB 1.37 MiB/s 01:16 ETA57 ETA[ 35% |************| 59200 KiB 1.31 MiB/s 01:19 ETA2921 ETA[ 35% |************| 59200 KiB 1.25 MiB/s 01:23 ETA44 ETA[ 37% |************| 62528 KiB 1.27 MiB/s 01:19 ETA521 ETA9*5216817 ETA42*702083509 ETA[ 44% |***************| 73984 KiB 1.39 MiB/s 01:04 ETA76 ETA[ 44% |***************| 73984 KiB 1.34 MiB/s 01:07 ETA28 ETA[ 45% |***************| 75776 KiB 1.32 MiB/s 01:06 ETA6*840044 ETA792963 ETA[ 49% |*****************| 81792 KiB 1.35 MiB/s 01:01 ETA32 ETA51588880:57 ETA[ 54% |******************| 91648 KiB 1.44 MiB/s 00:50 ETA21 ETA[ 54% |******************| 91648 KiB 1.40 MiB/s 00:52 ETA383 ETA[ 54% |******************| 91648 KiB 1.36 MiB/s 00:53 ETA44 ETA[ 54% |******************| 91648 KiB 1.32 MiB/s - stalled -0[ [ 162.3888555] cd0a: error reading fsbn 91644 of 91644-91771 (cd0 bn 91644; cn 9 54% |******************| 91648 KiB 1.28 MiB/s - stalled -6[ 54% |******************| 91648 KiB 1.24 MiB/s - stalled -3[ 54% |******************| 91648 KiB 1.21 MiB/s - stalled -196*395221 00:58 ETA[ 58% |********************| 97920 KiB 1.24 MiB/s 00:53 ETA24 ETA[ 60% |*********************| 98 MiB 1.25 MiB/s 00:51 ETA32 ETA[ 60% |*********************| 98 MiB 1.21 MiB/s 00:52 ETA0110011 ETA[ 64% |**********************| 105 MiB 1.25 MiB/s 00:45 ETA46 ETA[ 64% |**********************| 105 MiB 1.22 MiB/s 00:46 ETA17 ETA[ 64% |**********************| 105 MiB 1.20 MiB/s 00:47 ETA188 ETA[ 66% |***********************| 107 MiB 1.20 MiB/s 00:45 ETA819[ 66% |***********************| 108 MiB 1.18 MiB/s 00:46 ETA6[ 66% |***********************| 108 MiB 1.15 MiB/s 00:47 ETA47956 ETA[ 70% |************************| 114 MiB 1.18 MiB/s 00:40 ETA1639 ETA2*797 ETA[ 74% |*************************| 121 MiB 1.21 MiB/s 00:34 ETA07*530 ETA80**30725 ETA[ 82% |**************************** | 134 MiB 1.29 MiB/s 00:22 ETA8[ 82% |**************************** | 134 MiB 1.26 MiB/s 00:22 ETA5[ 82% |**************************** | 134 MiB 1.24 MiB/s 00:23 ETA322 ETA4*8419 ETA6*4167 ETA[ 88% |****************************** | 144 MiB 1.28 MiB/s 00:14 ETA9*573 ETA[ 89% |******************************* | 146 MiB 1.27 MiB/s 00:12 ETA906[ 90% |******************************* | 146 MiB 1.25 MiB/s 00:12 ETA4[ 91% |******************************* | 148 MiB 1.24 MiB/s 00:11 ETA2*5050 ETA3108 ETA4367 ETA46 ETA9** | 16191 ETA760 ETA25100*4 Finished [ 226.5581794] cd0(piixide0:0:1): adapter resource shortage Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA98% |********************************** | 4160 KiB 2.16 M00:00 ETA100*| 42201 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[1% || 5696 KiB 2.66 MiB/s 02:01 ETA4213 ETA[2% || 8960 KiB 2.20 MiB/s 02:25 ETA1.9642 ETA[3% |*| 11776 KiB 1.93 MiB/s 02:44 ETA8056 ETA[3% |*| 11776 KiB 1.43 MiB/s 03:41 ETA3752 ETA45615424 ETA[5% |*| 17856 KiB 1.67 MiB/s 03:05 ETA90085421 ETA20160815 ETA[6% |**| 22016 KiB 1.52 MiB/s 03:21 ETA7905 ETA[6% |**| 22079 KiB 1.34 MiB/s 03:49 ETA336350 ETA[6% |**| 22848 KiB 1.24 MiB/s 04:06 ETA[6% |**| 23552 KiB 1.24 MiB/s 04:06 ETA743841916 ETA[ 7% |**| 24384 KiB 1.16 MiB/s 04:22 ETA0842 ETA68 ETA[ 8% |**| 28544 KiB 1.16 MiB/s 04:18 ETA995292 ETA9% |***323202202 ETA10430453:56 ETA603271 ETA189763240 ETA[ 11% |***| 40384 KiB 1.33 MiB/s 03:38 ETA2% |****326828 ETA[ 13% |****| 45696 KiB 1.40 MiB/s 03:22 ETA6400385 ETA[ 13% |****| 46400 KiB 1.34 MiB/s 03:31 ETA07 ETA9762840 ETA48768936 ETA50304305 ETA5% |*****2608329 ETA672164014 ETA8*60800604 ETA[ 19% |******| 64640 KiB 1.50 MiB/s 02:56 ETA489 ETA[ 19% |******| 64640 KiB 1.43 MiB/s 03:05 ETA27 ETA[ 21% |*******| 72576 KiB 1.54 MiB/s 02:47 ETA353[ 21% |*******| 73536 KiB 1.50 MiB/s 02:51 ETA474 ETA[ 21% |*******| 73536 KiB 1.44 MiB/s 02:58 ETA23:01 ETA[ 22% |*******| 75328 KiB 1.41 MiB/s 03:00 ETA393 ETA[ 22% |*******| 75328 KiB 1.36 MiB/s 03:07 ETA410 ETA660[ 23% |********| 79488 KiB 1.36 MiB/s 03:04 ETA47 ETA[ 23% |********| 79488 KiB 1.32 MiB/s 03:10 ETA293 ETA[ 24% |********| 84096 KiB 1.35 MiB/s 03:02 ETA12726 ETA[ 24% |********| 84127 KiB 1.31 MiB/s 03:08 ETA2812 ETA[ 24% |********| 84127 KiB 1.27 MiB/s 03:14 ETA592855 ETA704071 ETA[ 27% |*********| 94208 KiB 1.35 MiB/s 02:55 ETA3937 ETA[ 27% |*********| 94239 KiB 1.31 MiB/s 03:00 ETA02 ETA[ 27% |*********| 94239 KiB 1.28 MiB/s 03:05 ETA855524 ETA[ 28% |*********| 96576 KiB 1.28 MiB/s 03:03 ETA9*888090 ETA[ 29% |**********| 98880 KiB 1.27 MiB/s 03:02 ETA55 ETA932846 ETA[ 30% |**********| 100 MiB 1.27 MiB/s 03:00 ETA[ 30% |********** | 100 MiB 1.25 MiB/s 03:01 ETA 1272:58 ETA359 ETA467 ETA[ 31% |**********| 105 MiB 1.25 MiB/s 02:59 ETA43:00 ETA[ 31% |**********| 105 MiB 1.22 MiB/s 03:03 ETA14 ETA[ 32% |***********| 107 MiB 1.21 MiB/s 03:02 ETA3 ETA[ 33% |***********| 111 MiB 1.24 MiB/s 02:55 ETA37 ETA6*8942 ETA7243431 ETA[ 39% |*************| 130 MiB 1.39 MiB/s 02:22 ETA40*21 ETA44019 ETA2941 ETA[ 43% |***************| 143 MiB 1.47 MiB/s 02:06 ETA57 ETA4674 ETA55090 ETA6*4521:55 ETA89549 ETA9*6483 ETA5196139 ETA[ 51% |*****************| 171 MiB 1.61 MiB/s 01:37 ETA08 ETA[ 51% |*****************| 171 MiB 1.58 MiB/s 01:39 ETA740 ETA[ 52% |******************| 172 MiB 1.57 MiB/s 01:40 ETA537935 ETA5*82611 ETA67426 ETA[ 58% |********************| 191 MiB 1.66 MiB/s 01:22 ETA53 ETA[ 58% |********************| 191 MiB 1.63 MiB/s 01:24 ETA2[ 58% |********************| 191 MiB 1.61 MiB/s 01:25 ETA20[ 59% |********************| 195 MiB 1.61 MiB/s 01:22 ETA03 ETA60*200319 ETA[ 61% |*********************| 203 MiB 1.64 MiB/s 01:16 ETA43[ 61% |*********************| 204 MiB 1.62 MiB/s 01:17 ETA18 ETA[ 62% |*********************| 204 MiB 1.60 MiB/s 01:18 ETA[ 62% |*********************| 204 MiB 1.58 MiB/s 01:18 ETA79 ETA[ [ 363.4572885] cd0a: error reading fsbn 267072 of 267072-267199 (cd0 bn 267072; 62% |*********************| 204 MiB 1.56 MiB/s 01:19 ETA520 ETA43*9617 ETA[ 64% |**********************| 214 MiB 1.58 MiB/s 01:12 ETA73 ETA[ 65% |**********************| 217 MiB 1.58 MiB/s 01:10 ETA1 ETA[ 65% |**********************| 217 MiB 1.56 MiB/s 01:11 ETA52 ETA[ 66% |***********************| 218 MiB 1.55 MiB/s 01:11 ETA32 ETA721509 ETA[ 69% |************************| 228 MiB 1.58 MiB/s 01:04 ETA7[ 70% |************************| 231 MiB 1.58 MiB/s 01:01 ETA72 ETA[ 70% |************************| 231 MiB 1.55 MiB/s 01:03 ETA4[ 70% |************************| 231 MiB 1.53 MiB/s - stalled -2[ 70% |************************| 233 MiB 1.52 MiB/s 01:03 ETA[ 70% |************************| 233 MiB 1.50 MiB/s 01:04 ETA[ 72% |*************************| 238 MiB 1.52 MiB/s 01:00 ETA400:58 ETA[ 72% |*************************| 240 MiB 1.51 MiB/s 00:59 ETA0[ 72% |*************************| 240 MiB 1.49 MiB/s 01:00 ETA8320:58 ETA46505 ETA[ 77% |**************************| 255 MiB 1.54 MiB/s 00:48 ETA3[ 77% |**************************| 255 MiB 1.53 MiB/s 00:48 ETA19 ETA[ 77% |**************************| 255 MiB 1.51 MiB/s 00:49 ETA0- stalled -[ 77% |**************************| 255 MiB 1.49 MiB/s - stalled -8 00:49 ETA[ 79% |***************************| 261 MiB 1.50 MiB/s 00:45 ETA24 ETA[ 79% |***************************| 262 MiB 1.49 MiB/s 00:44 ETA85 ETA[ 80% |**************************** | 264 MiB 1.48 MiB/s 00:43 ETA692 ETA[ 80% |**************************** | 266 MiB 1.48 MiB/s 00:42 ETA717[ 81% |**************************** | 270 MiB 1.47 MiB/s 00:40 ETA[ 81% |**************************** | 270 MiB 1.46 MiB/s 00:40 ETA53*5737 ETA[ 84% |***************************** | 278 MiB 1.47 MiB/s 00:34 ETA5 ETA[ 84% |***************************** | 278 MiB 1.46 MiB/s 00:35 ETA558371 ETA7*8927 ETA[ 88% |****************************** | 292 MiB 1.50 MiB/s 00:25 ETA[ 88% |****************************** | 292 MiB 1.49 MiB/s 00:25 ETA8374 ETA[ 89% |******************************* | 294 MiB 1.47 MiB/s 00:24 ETA653 ETA[ 89% |******************************* | 295 MiB 1.45 MiB/s 00:23 ETA62 ETA[ 90% |******************************* | 297 MiB 1.45 MiB/s 00:22 ETA841 ETA9[ 90% |******************************* | 299 MiB 1.43 MiB/s 00:20 ETA1300[ 91% |******************************* | 300 MiB 1.42 MiB/s 00:20 ETA1[ 91% |******************************* | 301 MiB 1.41 MiB/s 00:20 ETA19 ETA02392*388 ETA7465547 ETA[ 92% |******************************** | 306 MiB 1.33 MiB/s 00:17 ETA23185 ETA[ 93% |******************************** | 309 MiB 1.31 MiB/s 00:15 ETA4104 ETA[ 94% |******************************** | 310 MiB 1.30 MiB/s 00:14 ETA5*312 ETA60 ETA6[ 96% |********************************* | 318 MiB 1.31 MiB/s 00:08 ETA0[ 96% |********************************* | 318 MiB 1.30 MiB/s 00:08 ETA29[ 96% |********************************* | 319 MiB 1.29 MiB/s 00:07 ETA720[ 97% |********************************* | 320 MiB 1.28 MiB/s 00:07 ETA6 ETA[ [ 482.6587312] cd0a: error reading fsbn 341440 of 341440-341567 (cd0 bn 341440; 97% |********************************* | 321 MiB 1.28 MiB/s 00:06 ETA7265 ETA5438*3[ 98% |********************************** | 323 MiB 1.22 MiB/s 00:05 ETA[ 98% |********************************** | 323 MiB 1.21 MiB/s 00:05 ETA[ 98% |********************************** | 323 MiB 1.20 MiB/s 00:05 ETA4 ETA4198573 ETA66592 ETA781 ETA0 ETA100*| 329 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/misc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[34% |***********| 5248 KiB 2.93 MiB/s 00:03 ETA264 ETA[34% |***********| 5248 KiB 1.40 MiB/s 00:06 ETA178 ETA[34% |***********| 5248 KiB 949.81 KiB/s 00:10 ETA809.162 ETA[34% |***********| 5248 KiB 697.17 KiB/s - stalled -17.55[[ 537.6328247] cd0a: error reading fsbn 365624 of 365624-365751 (cd0 bn 365624;34% |***********| 5248 KiB 554.84 KiB/s - stalled -498.7051******7872 KiB 691.67 00:10 ETA63*****9600 KiB 757.0507 ETA7***112840.694 ETA84****2872.482 ETA92*** | 14016 KiB 912.421 ETA100***| 15230 KiB 970.600 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[0% || 00.00 KiB/s --:-- ETA[0% || 00.00 KiB/s --:-- ETA[0% || 00.00 KiB/s --:-- ETA[0% || 00.00 KiB/s --:-- ETA[[ 554.9787173] cd0a: error reading fsbn 419760 of 419760-419775 (cd0 bn 419760;0% || 00.00 KiB/s --:-- ETAgzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Sorry, unable to determine archive format. 0% || 00.00 KiB/s --:-- ETACommand failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/tests.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 150, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1623, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1351, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.06.23.11.54.06/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.06.23.11.54.06/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.06.23.11.54.06/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a', '-tb-size', '128'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 28878 child_fd: 14 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11477.81 real 28.13 user 8.93 sys