This is anita version 1.45 Using pexpect version 4.2.1 /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.10.15.05.44.09/anita \ --structured-log-file=/bracket/i386/test/2018.10.15.05.44.09/install.slog \ "--vmm-args=-tb-size 128" \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/ Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/floppy/boot-com1.fs... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/floppy/boot2.fs... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/floppy/boot3.fs... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/floppy/boot4.fs... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/floppy/boot5.fs... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/floppy/boot6.fs... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/cdrom/boot-com.iso... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/installation/misc/pxeboot_ia32.bin... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/modules.tgz... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/base.tgz... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/etc.tgz... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/comp.tgz... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/misc.tgz... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/tests.tgz... OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.10.15.05.44.09/release/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK makefs \ -t \ cd9660 \ -o \ rockridge \ /bracket/i386/test/2018.10.15.05.44.09/anita/install_tmp.iso \ /bracket/i386/test/2018.10.15.05.44.09/anita/download Creating hard disk image...QEMU emulator version 2.11.1 Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 \ -m \ 128 \ -drive \ file=/bracket/i386/test/2018.10.15.05.44.09/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.10.15.05.44.09/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.10.15.05.44.09/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -tb-size \ 128 child pid is 29800 SeaBIOS (version rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+07F915A0+07EF15A0 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-14629660\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.11.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block130): /bracket/i386/test/2018.10.15.05.44.09/anita/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback ide0-cd1 (#block325): /bracket/i386/test/2018.10.15.05.44.09/anita/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block512): /bracket/i386/test/2018.10.15.05.44.09/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[20] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /brac -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...[Dchange floppy0 /brackchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/t \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...Dchange floppy0 /bracket/i386/techange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...Dchange floppy0 /bracket/i386/test/2018change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.1change floppy0 /bracket/i386/test/2018.10change floppy0 /bracket/i386/test/2018.10.change floppy0 /bracket/i386/test/2018.10.1change floppy0 /brack /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+5494380\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...et/i386/test/2018.10.15change floppy0 /bracket/i386/test/2018.10.15.change floppy0 /bracket/i386/test/2018.10.15.0change floppy0 /bracket/i386/test/2018.10.15.05change floppy0 /bracket/i386/test/2018.10.15.05.change floppy0 /bracket/i386/test/2018.10.15.05.4 -\|/-\|/-\|/-\|/-\|/-\|/-\|/+842132=0x13ff034 [ 1.0000000] ksyms: Symbol table not found [ 1.0000000] ksyms: String table not found [ 1.0000000] ksyms: Perhaps the kernel is stripped? [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.25 (INSTALL) #0: Mon Oct 15 08:32:54 UTC 2018 [ 1.0000000] root@babylon5.netbsd.org:/tmp/bracket/build/2018.10.15.05.44.09-i386/obj/sys/arch/i386/compile/INSTALL [ 1.0000000] total memory = 127 MB [ 1.0000000] avail memory = 105 MB [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS ) [ 1.0000030] ACPI: RSDT 0x0000000007FE15FC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACP 0x0000000007FE1458 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 1.0000030] ACPI: DSDT 0x0000000007FE0040 001418 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACS 0x0000000007FE0000 000040 [ 1.0000030] ACPI: APIC 0x0000000007FE154C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 1.0000030] ACPI: HPET 0x0000000007FE15C4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000030] ioapic0 at mainbus0 apid 0 [ 1.0000030] cpu0 at mainbus0 apid 0 [ 1.0000030] cpu0: QEMU Virtual CPU version 2.5+, id 0x663 [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180810 [ 1.0000030] acpi0: fixed power button present [ 1.0169367] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0217348] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0217348] pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 [ 1.0217348] FDC0 (PNP0700) at acpi0 not configured [ 1.0217348] LPT (PNP0400) at acpi0 not configured [ 1.0217348] COM1 (PNP0501) at acpi0 not configured [ 1.0217348] qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b [ 1.0217348] apm0 at acpi0: Power Management spec V1.2 [ 1.0217348] ACPI: Enabled 2 GPEs in block 00 to 0F [ 1.0217348] pckbd0 at pckbc1 (kbd slot) [ 1.0217348] pckbc1: using irq 1 for kbd slot [ 1.0217348] wskbd0 at pckbd0 mux 1 [ 1.0217348] pms0 at pckbc1 (aux slot) [ 1.0217348] pckbc1: using irq 12 for aux slot [ 1.0217348] wsmouse0 at pms0 mux 0 [ 1.0217348] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0217348] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.0217348] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.0217348] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.0217348] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.0217348] atabus0 at piixide0 channel 0 [ 1.0217348] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.0217348] atabus1 at piixide0 channel 1 [ 1.0217348] piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) [ 1.0217348] piixpm0: 24-bit timer [ 1.0217348] piixpm0: interrupting at ioapic0 pin 9 [ 1.0217348] iic0 at piixpm0: I2C bus [ 1.0217348] vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) [ 1.0217348] wsdisplay0 at vga1 kbdmux 1 [ 1.0217348] drm at vga1 not configured [ 1.0217348] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0217348] wm0: interrupting at ioapic0 pin 11 [ 1.0217348] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0217348] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0217348] wm0: MDIC write error: phy 1 reg 22 [ 1.0217348] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0217348] isa0 at pcib0 [ 1.0217348] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.0217348] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.0217348] com0: console [ 1.0217348] attimer0 at isa0 port 0x40-0x43 [ 1.0217348] pcppi0 at isa0 port 0x61 [ 1.0217348] midi0 at pcppi0: PC speaker [ 1.0217348] sysbeep0 at pcppi0 [ 1.0217348] isapnp0 at isa0 port 0x279 [ 1.0217348] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0217348] attimer0: attached to pcppi0 [ 1.0217348] acpicpu0 at cpu0: ACPI CPU [ 1.4585841] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.4585841] atapibus0 at atabus0: 2 targets [ 1.4783097] cd0 at atapibus0 drive 1: cdrom removable [ 1.4983220] wd0 at atabus0 drive 0 [ 1.4983220] wd0: [ 1.4983220] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 7.6363622] atapibus1 at atabus1: 2 targets [ 7.6363622] cd1 at atapibus1 drive 0: cdrom removable [ 7.6917777] boot device: fd0 [ 16.2317843] (st0 0xe0 cyl 0) [ 16.2317843] fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) [ 16.5119713] root on md0a dumps on md0b [ 16.5119713] root file system type: ffs [ 16.5119713] kern.module.path=/stand/i386/8.99.25/modules [ 16.5301656] clock: unknown CMOS layout [ 16.5428042] warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) [ 23.4675925] Kernel RNG "kernel" long run test FAILURE: Run of 27 1s found [ 23.4675925] cprng kernel: failed statistical RNG test [ 39.8922360] Kernel RNG "kernel" monobit test FAILURE: 10275 ones [ 39.8922360] cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.25 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.25 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' --------------------------------------------------------------------------------Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a --------------------------------------------------------------------------------/dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 --------------------------------------------------------------------------------Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA53% |******************11264 KiB 7.04 M00:01 ETA85***********798780 ETA100******| 2106096 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA15% |*****4480 KiB 2.41 M00:10 ETA8*53123809 ETA35******10368776 ETA42**2480855 ETA59******74723.063 ETA71****21056252 ETA88******6048440 ETA100*****| 2951037 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA6% |**9344 KiB 6.10 M00:23 ETA8131205.82[10% |***| 16256 KiB 4.25 MiB/s 00:31 ETA3.706 ETA[10% |***| 16256 KiB 2.76 MiB/s 00:49 ETA5253 ETA[10% |***| 16256 KiB 2.06 MiB/s 01:05 ETA1.9011 ETA[13% |****| 21312 KiB 2.17 MiB/s 01:00 ETA1.995 ETA[13% |****| 21312 KiB 1.79 MiB/s 01:12 ETA687 ETA[15% |*****| 24576 KiB 1.76 MiB/s 01:12 ETA704676 ETA7649665 ETA[20% |*******| 31168 KiB 1.85 MiB/s 01:05 ETA296739 ETA[20% |*******| 31296 KiB 1.66 MiB/s 01:12 ETA557 ETA23844[21% |*******| 32704 KiB 1.47 MiB/s 01:21 ETA6723 ETA[ 21% |*******| 32767 KiB 1.35 MiB/s 01:28 ETA131 ETA[ 22% |*******| 34624 KiB 1.31 MiB/s 01:29 ETA2633 ETA[ 23% |********| 35840 KiB 1.28 MiB/s 01:30 ETA475687[ 24% |********| 37599 KiB 1.25 MiB/s 01:31 ETA196 ETA[ 24% |******** | 37599 KiB 1.17 MiB/s 01:38 ETA 760242 ETA13 ETA[ 27% |*********| 43392 KiB 1.22 MiB/s 01:29 ETA455031 ETA[ 27% |*********| 43455 KiB 1.15 MiB/s 01:34 ETA36 ETA[ 28% |*********| 43840 KiB 1.10 MiB/s 01:38 ETA9*518425 ETA[ 30% |**********| 46656 KiB 1.12 MiB/s 01:34 ETA1819232 ETA[ 32% |***********| 50176 KiB 1.14 MiB/s 01:29 ETA752325442[ 35% |************| 55296 KiB 1.14 MiB/s 01:25 ETA36 ETA[ 35% |************| 55296 KiB 1.10 MiB/s 01:28 ETA089 ETA[ 37% |************| 58368 KiB 1.11 MiB/s 01:24 ETA096 ETA[ 37% |************| 58368 KiB 1.07 MiB/s 01:27 ETA59 ETA[ 39% |*************| 61760 KiB 1.10 MiB/s 01:23 ETA40*31041 ETA360092 ETA[ 42% |**************| 65664 KiB 1.10 MiB/s 01:19 ETA0920 ETA[ 42% |**************| 65664 KiB 1.06 MiB/s 01:21 ETA52 ETA[ 42% |**************| 65664 KiB 1.03 MiB/s 01:24 ETA25 ETA[ 42% |**************| 65664 KiB 1.00 MiB/s - stalled -0.98[ 44% |***************| 68544 KiB 1.01 MiB/s 01:23 ETA0.994 ETA[ 44% |***************| 68544 KiB 0.98 MiB/s 01:25 ETA993.94 K7 ETA[ 44% |***************| 68544 KiB 982.53 KiB/s 01:28 ETA66.65- stalled -570592 KiB 985.33 01:26 ETA8*5328 KiB 1.00 M17 ETA[ 50% |*****************| 78656 KiB 1.04 MiB/s 01:11 ETA23 ETA[ 50% |*****************| 78656 KiB 1.01 MiB/s 01:13 ETA0.995 ETA[ 50% |*****************| 78656 KiB 0.98 MiB/s 01:15 ETA720 KiB 995.70 K7 ETA[ 52% |******************| 81856 KiB 1.00 MiB/s 01:11 ETA0.982 ETA[ 52% |******************| 81856 KiB 0.97 MiB/s 01:13 ETA985.62 K4 ETA[ 53% |******************| 83840 KiB 0.97 MiB/s 01:11 ETA45056 KiB 999.70 K0 ETA[ 54% |******************| 85056 KiB 993.16 KiB/s 01:10 ETA77.012 ETA5*698.701 ETA[ 56% |*******************| 88128 KiB 988.42 KiB/s 01:08 ETA4.01[ 56% |*******************| 88128 KiB 966.62 KiB/s 01:09 ETA2.61[ 56% |*******************| 88128 KiB 945.95 KiB/s 01:11 ETA1.91[ 59% |********************| 92160 KiB 969.96 KiB/s 01:05 ETA60*3376 KiB 975.673 ETA[ 60% |*********************| 93376 KiB 962.88 KiB/s 01:04 ETA55.59[ 61% |*********************| 95680 KiB 967.47 KiB/s 01:01 ETA3*7984 KiB 974.310:58 ETA69.589 ETA[ 63% |**********************| 97984 KiB 955.39 KiB/s 01:00 ETA0.76[ 63% |**********************| 97984 KiB 937.11 KiB/s 01:01 ETA2.56[ 63% |**********************| 97984 KiB 919.64 KiB/s - stalled -5.925 99 MiB 943.24 00:56 ETA[ 67% |***********************| 102 MiB 957.36 KiB/s 00:53 ETA3.742 ETA[ 67% |***********************| 102 MiB 948.75 KiB/s 00:52 ETA36.833 ETA[ 67% |***********************| 102 MiB 932.52 KiB/s 00:53 ETA19.904 ETA84 MiB 926.752 ETA72**9 MiB 967.6444 ETA5*14 MiB 0.97 M37 ETA[ 79% |***************************| 121 MiB 1.02 MiB/s 00:29 ETA80*1[ 80% |**************************** | 121 MiB 1.01 MiB/s 00:29 ETA030 ETA[ 80% |**************************** | 121 MiB 0.99 MiB/s 00:30 ETA8229 ETA13[ 82% |**************************** | 124 MiB 0.98 MiB/s 00:27 ETA4*71.003 ETA0.99[ 86% |****************************** | 131 MiB 1.01 MiB/s 00:19 ETA[ 88% |****************************** | 134 MiB 1.01 MiB/s 00:17 ETA526 ETA90*74 ETA1832 ETA[ 92% |******************************** | 141 MiB 1.04 MiB/s 00:10 ETA3208 ETA5*456 ETA9* | 15080 ETA17100*6 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA16553632.202:08 ETA3% |* 128 KiB 63.141:04 ETA[30% |**********| 1280 KiB 324.99 KiB/s 00:09 ETA14.5392********************** | 3904 KiB 661.710 ETA5* | 40320.9100**| 421045.12 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA[0% || 2944 KiB 1.46 MiB/s 03:35 ETA046 ETA[2% || 6720 KiB 1.76 MiB/s 02:57 ETA523:25 ETA[2% || 6720 KiB 1.14 MiB/s 04:33 ETA058 ETA[3% |*| 9856 KiB 1.27 MiB/s 04:04 ETA1431 ETA[3% |*| 12544 KiB 1.31 MiB/s 03:53 ETA456164233 ETA3446 ETA6% |**21056501 ETA[7% |**| 24448 KiB 1.78 MiB/s 02:45 ETA8649666 ETA739248 ETA[9% |***| 30208 KiB 1.78 MiB/s 02:42 ETA[9% |***| 31808 KiB 1.77 MiB/s 02:42 ETA25652 ETA[9% |***| 31825 KiB 1.59 MiB/s 03:00 ETA244855 ETA108964813 ETA[ 10% |***| 34880 KiB 1.50 MiB/s 03:09 ETA1699234 ETA74404711 ETA89125007 ETA[ 12% |****| 41088 KiB 1.49 MiB/s 03:07 ETA408[ 12% |****| 41410 KiB 1.39 MiB/s 03:20 ETA41351204212 ETA460840 ETA[ 14% |****| 48448 KiB 1.44 MiB/s 03:08 ETA5% |*****93447 ETA654336532:54 ETA779206043 ETA[ 19% |******| 63168 KiB 1.68 MiB/s 02:33 ETA29656 ETA21*967722 ETA2747528513 ETA4*804489404 ETA[ 26% |*********| 86208 KiB 2.03 MiB/s 01:55 ETA80641[ 27% |*********| 89280 KiB 2.00 MiB/s 01:55 ETA90561.986 ETA[ 27% |*********| 91264 KiB 1.96 MiB/s 01:57 ETA12:00 ETA82541:59 ETA[ 30% |**********| 99264 KiB 1.99 MiB/s 01:51 ETA54 ETA[ 31% |**********| 99 MiB 1.98 MiB/s 01:51 ETA10042 ETA2*260 ETA[ 33% |***********| 105 MiB 1.96 MiB/s 01:48 ETA[ 33% |***********| 106 MiB 1.95 MiB/s 01:49 ETA73[ 33% |***********| 107 MiB 1.91 MiB/s 01:50 ETA8881 ETA[ 33% |***********| 108 MiB 1.86 MiB/s 01:53 ETA25 ETA491[ 35% |************| 112 MiB 1.82 MiB/s 01:53 ETA[ 35% |************| 113 MiB 1.81 MiB/s 01:53 ETA6621 ETA02 ETA[ 36% |************| 116 MiB 1.76 MiB/s 01:55 ETA56 ETA72190 ETA9*48246 ETA40*961 ETA[ 41% |**************| 133 MiB 1.89 MiB/s 01:38 ETA479 ETA3*8914 ETA44231 ETA56628 ETA7*512.013 ETA[ 48% |****************| 156 MiB 2.04 MiB/s 01:19 ETA9*88 ETA29 ETA[ 50% |*****************| 162 MiB 2.03 MiB/s 01:17 ETA18 ETA[ 50% |*****************| 163 MiB 1.98 MiB/s 01:19 ETA6[ 50% |*****************| 163 MiB 1.93 MiB/s 01:20 ETA15419 ETA3*7085 ETA5*82.0409 ETA8*85113 ETA[ 59% |********************| 190 MiB 2.14 MiB/s 01:00 ETA60*230:59 ETA32[ 61% |*********************| 196 MiB 2.12 MiB/s 00:58 ETA0[ 61% |*********************| 196 MiB 2.07 MiB/s 00:59 ETA61:00 ETA[ 62% |*********************| 199 MiB 2.06 MiB/s 00:58 ETA5[ 62% |*********************| 199 MiB 2.02 MiB/s 00:59 ETA11:00 ETA[ 62% |*********************| 199 MiB 1.98 MiB/s 01:00 ETA71 ETA[ 63% |**********************| 204 MiB 1.99 MiB/s 00:57 ETA88 ETA[ 65% |**********************| 209 MiB 2.00 MiB/s 00:55 ETA1.99[ 66% |***********************| 212 MiB 2.00 MiB/s 00:53 ETA31.99477791 ETA[ 69% |************************| 222 MiB 2.02 MiB/s 00:48 ETA0[ 69% |************************| 222 MiB 1.98 MiB/s 00:48 ETA3[ 71% |************************| 229 MiB 2.00 MiB/s 00:45 ETA301.994 ETA[ 71% |************************| 230 MiB 1.98 MiB/s 00:45 ETA2*653573 ETA4990 ETA[ 77% |**************************| 247 MiB 2.04 MiB/s 00:35 ETA28*934 ETA80*5660 ETA2631126 ETA[ 84% |***************************** | 270 MiB 2.14 MiB/s 00:22 ETA521 ETA[ 85% |***************************** | 272 MiB 2.12 MiB/s 00:22 ETA130941 ETA6*70 ETA879719 ETA808168 ETA2347 ETA[ 88% |****************************** | 284 MiB 2.02 MiB/s 00:17 ETA9*5[ 89% |******************************* | 285 MiB 2.00 MiB/s 00:16 ETA671.99890865[ 90% |******************************* | 288 MiB 1.94 MiB/s 00:16 ETA935 ETA2108990876511321279873654434 ETA22*10[ 92% |******************************** | 295 MiB 1.69 MiB/s 00:14 ETA8[ 92% |******************************** | 295 MiB 1.67 MiB/s 00:14 ETA6673 ETA38[ 93% |******************************** | 299 MiB 1.65 MiB/s 00:12 ETA30041 ETA[ 94% |******************************** | 303 MiB 1.65 MiB/s 00:10 ETA5*409 ETA[ 95% |********************************* | 305 MiB 1.65 MiB/s 00:08 ETA647 ETA[ 95% |********************************* | 306 MiB 1.64 MiB/s 00:07 ETA6728[ 96% |********************************* | 308 MiB 1.62 MiB/s 00:06 ETA9101059785 ETA176524[ 97% |********************************* | 312 MiB 1.54 MiB/s 00:05 ETA[ 97% |********************************* | 312 MiB 1.53 MiB/s 00:05 ETA 2[ 97% |********************************* | 312 MiB 1.51 MiB/s 00:05 ETA [ 97% |********************************* | 312 MiB 1.50 MiB/s - stalled -[ [ 446.2984647] cd0a: error reading fsbn 325860 of 325860-325987 (cd0 bn 325860; 97% |********************************* | 312 MiB 1.49 MiB/s - stalled -8[ 97% |********************************* | 312 MiB 1.47 MiB/s - stalled - 6[ 97% |********************************* | 312 MiB 1.45 MiB/s - stalled -[ 97% |********************************* | 312 MiB 1.44 MiB/s - stalled -3[ [ 454.5636869] cd0a: error reading fsbn 323940 of 323940-323955 (cd0 bn 323940; gzip: failed to read stdin: Device busy tar: End of archive volume 1 reached tar: Unexpected EOF on archive file tar: Failed seek on file ./usr/share/man/man3/krb5_crypto_getblocksize.3 (Invalid argument) 97% |********************************* | 312 MiB 1.43 MiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 152, in status = main() File "/usr/pkg/bin/anita", line 132, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1677, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1405, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 117, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.10.15.05.44.09/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.10.15.05.44.09/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.10.15.05.44.09/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a', '-tb-size', '128'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 29800 child_fd: 14 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(Select medium|Install from)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11342.48 real 23.73 user 9.34 sys