This is anita version 2.1 Using pexpect version 4.6.0 /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2019.12.13.15.49.22/anita \ --structured-log-file=/bracket/i386/test/2019.12.13.15.49.22/install.slog \ '--vmm-args=-tb-size 128' \ --test-timeout \ 120000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/ Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/misc/pxeboot_ia32.bin... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/floppy/boot-com1.fs... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/floppy/boot2.fs... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/floppy/boot3.fs... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/floppy/boot4.fs... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/floppy/boot5.fs... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/floppy/boot6.fs... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/installation/cdrom/boot-com.iso... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/modules.tgz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/base.tgz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/etc.tgz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/comp.tgz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/misc.tgz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/rescue.tgz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/tests.tgz... OK Downloading file:///bracket/i386/test/2019.12.13.15.49.22/release/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t \ cd9660 \ -o \ rockridge \ /bracket/i386/test/2019.12.13.15.49.22/anita/install_tmp.iso \ /bracket/i386/test/2019.12.13.15.49.22/anita/download Creating hard disk image... done. QEMU emulator version 2.11.1 Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-i386 qemu package: qemu-2.11.1 glib2 package: glib2-2.56.4nb4 not reversing virtio devices qemu-system-i386 \ -m \ 128 \ -drive \ file=/bracket/i386/test/2019.12.13.15.49.22/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2019.12.13.15.49.22/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -drive \ file=/bracket/i386/test/2019.12.13.15.49.22/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -tb-size \ 128 child pid is 19748 SeaBIOS (version rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+07F915A0+07EF15A0 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== 1. Install NetBSD 2. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-15160180\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 1, insert disk 2, and press return...QEMU 2.11.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block170): /bracket/i386/test/2019.12.13.15.49.22/anita/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback floppy0 (#block392): /bracket/i386/test/2019.12.13.15.49.22/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[20] Removable device: not locked, tray closed Cache mode: writeback ide0-cd1 (#block557): /bracket/i386/test/2019.12.13.15.49.22/anita/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2019 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2019.change floppy0 /bracket/i386/test/2019.1change floppy0 /bracket/i386/test/2019.12change floppy0 /bracket/i386/test/2019.12.change floppy0 /bracket/i386/test/2019.12.1change floppy0 /bracket/i386/test/2019.12.13chan |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+5525476|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2019.12.13.change floppy0 /bracket/i386/test/2019.12.13.1change floppy0 /bracket/i386/test/2019.12.13.15change floppy0 /bracket/i386/test/2019.12.13.15.change floppy0 /bracket/i386/test/2019.12.13.15.4change floppy0 /bracket/i386/test/2019.12.13.15.49 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|+843804=0x1489034 [ 1.0000000] ksyms: Symbol table not found [ 1.0000000] ksyms: String table not found [ 1.0000000] ksyms: Perhaps the kernel is stripped? [ 1.0000000] pool redzone disabled for 'pdppl' [ 1.0000000] pool redzone disabled for 'kmem-4096' [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.23 (INSTALL) #0: Fri Dec 13 17:33:31 UTC 2019 [ 1.0000000] root@babylon5.netbsd.org:/tmp/bracket/build/2019.12.13.15.49.22-i386/obj/sys/arch/i386/compile/INSTALL [ 1.0000000] total memory = 127 MB [ 1.0000000] avail memory = 104 MB [ 1.0000000] pool redzone disabled for 'buf64k' [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS ) [ 1.0000030] ACPI: RSDT 0x0000000007FE15FC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACP 0x0000000007FE1458 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 1.0000030] ACPI: DSDT 0x0000000007FE0040 001418 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACS 0x0000000007FE0000 000040 [ 1.0000030] ACPI: APIC 0x0000000007FE154C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 1.0000030] ACPI: HPET 0x0000000007FE15C4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000030] ioapic0 at mainbus0 apid 0 [ 1.0000030] cpu0 at mainbus0 apid 0 [ 1.0000030] cpu0: QEMU Virtual CPU version 2.5+, id 0x663 [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20190816 [ 1.0000030] acpi0: fixed power button present [ 1.0341470] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0372918] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0372918] pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 [ 1.0372918] FDC0 (PNP0700) at acpi0 not configured [ 1.0372918] LPT (PNP0400) at acpi0 not configured [ 1.0372918] COM1 (PNP0501) at acpi0 not configured [ 1.0372918] qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b [ 1.0372918] apm0 at acpi0: Power Management spec V1.2 [ 1.0372918] ACPI: Enabled 2 GPEs in block 00 to 0F [ 1.0372918] pckbd0 at pckbc1 (kbd slot) [ 1.0372918] pckbc1: using irq 1 for kbd slot [ 1.0372918] wskbd0 at pckbd0 mux 1 [ 1.0372918] pms0 at pckbc1 (aux slot) [ 1.0372918] pckbc1: using irq 12 for aux slot [ 1.0372918] wsmouse0 at pms0 mux 0 [ 1.0372918] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0372918] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.0372918] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.0372918] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.0372918] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.0372918] atabus0 at piixide0 channel 0 [ 1.0372918] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.0372918] atabus1 at piixide0 channel 1 [ 1.0372918] piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) [ 1.0372918] piixpm0: 24-bit timer [ 1.0372918] piixpm0: interrupting at ioapic0 pin 9 [ 1.0372918] iic0 at piixpm0 port 0: I2C bus [ 1.0372918] vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) [ 1.0372918] wsdisplay0 at vga1 kbdmux 1 [ 1.0372918] drm at vga1 not configured [ 1.0372918] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0372918] wm0: interrupting at ioapic0 pin 11 [ 1.0372918] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0372918] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0372918] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0372918] isa0 at pcib0 [ 1.0372918] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.0372918] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.0372918] com0: console [ 1.0372918] attimer0 at isa0 port 0x40-0x43 [ 1.0372918] pcppi0 at isa0 port 0x61 [ 1.0372918] midi0 at pcppi0: PC speaker [ 1.0372918] sysbeep0 at pcppi0 [ 1.0372918] isapnp0 at isa0 port 0x279 [ 1.0372918] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0372918] attimer0: attached to pcppi0 [ 1.0372918] acpicpu0 at cpu0: ACPI CPU [ 1.2588683] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.2780892] atapibus0 at atabus0: 2 targets [ 1.2780892] cd0 at atapibus0 drive 1: cdrom removable [ 1.2780892] wd0 at atabus0 drive 0 [ 1.3679592] wd0: [ 1.3679592] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 7.3632440] atapibus1 at atabus1: 2 targets [ 7.3632440] cd1 at atapibus1 drive 0: cdrom removable [ 7.3984314] boot device: fd0 [ 15.9583197] (st0 0xe0 cyl 0) [ 15.9583197] fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0 cyl 0 head 0 sec 1) [ 16.2485386] root on md0a dumps on md0b [ 16.2685284] root file system type: ffs [ 16.2685284] kern.module.path=/stand/i386/9.99.23/modules [ 16.2685284] clock: unknown CMOS layout Created tmpfs /dev (1720320 byte, 3328 inodes) erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 9.99.23 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-9.99.23 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx Yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- ---- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you do not want to use the existing partitions, you can use a simple editor to set the sizes of the NetBSD partitions, or remove existing ones and apply the default partition sizes. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 1536M. A full installation requires at least 89M without X and at least 339M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do?xxxx>a: Use existing disklabel partitionsxx b: Set sizes of NetBSD partitions xx c: Use default partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Use existing disklabel partitions>b: Set sizes of NetBSD partitions You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Other markers: '=' existing partition. Size (sec)Filesystem----------------------------------- - -------------------- >a: 3145728 = / b: 0 c: 0/tmp (tmpfs) d: 0/usr e: 0/var----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 0 sec. a: 3145728 = / >b: 0 b: 0 >c: 0 /tmp (tmpfs) c: 0 /tmp (tmpfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 0 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs. Total size: 1536M, free: 0B Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a:0 3145727 3145728 4.2BSD I b:0 3145727 3145728 Whole disk ------------ ------------ ------------ -------- ---- ---------------- d: Change input units (sectors/cylinders/MB/GB) e: Edit name of the disk f: Clone external partition(s) g: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Status: RunningCommand: disklabel -w -r -f /tmp/disklabel.4073 wd0 'wd0' 'fictitious' qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /sbin/fsck_ffs -p -q /dev/wd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq /dev/rwd0a: BAD SUPER BLOCK: CAN'T FIND SUPERBLOCK /dev/rwd0a: UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY. Command failedHit enter to continue It appears that /dev/wd0a is not a ffs file system or the fsck was not successful. Try mounting it anyway? (Error number 8.) lqqqqqqqqqqqqqqqkx Yes or no? xxxx>a: Noxx b: YesxmqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 145, in status = main() File "/usr/pkg/bin/anita", line 126, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 2116, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1306, in _install self._install_using_sysinst() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1834, in _install_using_sysinst 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 216, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 119, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 82, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2019.12.13.15.49.22/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2019.12.13.15.49.22/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a', '-drive', 'file=/bracket/i386/test/2019.12.13.15.49.22/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-tb-size', '128'] buffer (last 100 chars): '7m\x1b(0\x00x\x1b(B\x00\x00\x1b[15;32H\x1b(0\x00x\x1b(B\x00\x00 b: Yes\x1b[15;48H\x1b(0\x00x\x1b(B\x00\x00\x1b[16;32H\x1b(0\x00mqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[14;33H\x1b[m' before (last 100 chars): '7m\x1b(0\x00x\x1b(B\x00\x00\x1b[15;32H\x1b(0\x00x\x1b(B\x00\x00 b: Yes\x1b[15;48H\x1b(0\x00x\x1b(B\x00\x00\x1b[16;32H\x1b(0\x00mqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[14;33H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 19748 child_fd: 12 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(Select medium|Install from)|(Enter the CDROM device)|(unused-group-should-not-match)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(([a-z]): Set sizes of NetBSD partitions)|(a partitioning scheme)|(([a-z]): Use the entire disk)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode)|(Please enter a name for your NetBSD disk)|(ready to install NetBSD on your hard disk)|(We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions)|(Your disk currently has a non-NetBSD partition)|(Sysinst could not automatically determine the BIOS geometry of the disk)|(Do you want to re-edit the disklabel partitions)") 10905.48 real 1.22 user 10.00 sys