This is anita version 2.10 Using pexpect version 4.8.0 /usr/pkg/bin/anita \ --workdir=/bracket/macppc/test/2022.12.11.01.36.49/anita \ --structured-log-file=/bracket/macppc/test/2022.12.11.01.36.49/install.slog \ --vmm-args= install \ file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/ Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/floppy/boot2.fs... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/floppy/boot3.fs... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/modules.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/base.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/etc.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/comp.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/gpufw.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/misc.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/rescue.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/tests.tgz... OK Downloading file:///bracket/macppc/test/2022.12.11.01.36.49/release/release/macppc/binary/sets/tests.tar.xz... missing but optional, so that's OK mkisofs \ -r \ -hfs \ -part \ -l \ -J \ -N \ -o /bracket/macppc/test/2022.12.11.01.36.49/anita/install_tmp.iso \ /bracket/macppc/test/2022.12.11.01.36.49/anita/download mkisofs: Warning: no Apple/Unix files will be decoded/mapped Warning: creating filesystem that does not conform to ISO-9660. Setting input-charset to 'UTF-8' from locale. 3.99% done, estimate finish Sun Dec 11 03:24:19 2022 7.98% done, estimate finish Sun Dec 11 03:24:19 2022 11.96% done, estimate finish Sun Dec 11 03:24:10 2022 15.96% done, estimate finish Sun Dec 11 03:24:06 2022 19.94% done, estimate finish Sun Dec 11 03:24:04 2022 23.92% done, estimate finish Sun Dec 11 03:24:02 2022 27.89% done, estimate finish Sun Dec 11 03:24:01 2022 31.89% done, estimate finish Sun Dec 11 03:24:00 2022 35.87% done, estimate finish Sun Dec 11 03:23:59 2022 39.85% done, estimate finish Sun Dec 11 03:23:59 2022 43.85% done, estimate finish Sun Dec 11 03:24:00 2022 47.83% done, estimate finish Sun Dec 11 03:24:00 2022 51.81% done, estimate finish Sun Dec 11 03:23:59 2022 55.79% done, estimate finish Sun Dec 11 03:23:59 2022 59.79% done, estimate finish Sun Dec 11 03:23:59 2022 63.77% done, estimate finish Sun Dec 11 03:23:58 2022 67.75% done, estimate finish Sun Dec 11 03:23:58 2022 71.73% done, estimate finish Sun Dec 11 03:23:58 2022 75.73% done, estimate finish Sun Dec 11 03:23:57 2022 79.71% done, estimate finish Sun Dec 11 03:23:57 2022 83.70% done, estimate finish Sun Dec 11 03:23:58 2022 87.67% done, estimate finish Sun Dec 11 03:23:58 2022 91.65% done, estimate finish Sun Dec 11 03:23:58 2022 95.63% done, estimate finish Sun Dec 11 03:23:58 2022 Total extents actually written (inc HFS) = 125336 (Size of ISO volume = 122434, HFS extra = 2902) Total translation table size: 0 Total rockridge attributes bytes: 4937 Total directory bytes: 18432 Path table size(bytes): 124 Max brk space used 0 125486 extents written (245 MB) mkisofs \ -r \ -hfs \ -part \ -l \ -J \ -N \ -o /bracket/macppc/test/2022.12.11.01.36.49/anita/boot.iso \ /bracket/macppc/test/2022.12.11.01.36.49/anita/runtime_boot_iso mkisofs: Warning: no Apple/Unix files will be decoded/mapped Warning: creating filesystem that does not conform to ISO-9660. Setting input-charset to 'UTF-8' from locale. 71.50% done, estimate finish Sun Dec 11 03:23:58 2022 Total extents actually written (inc HFS) = 6875 (Size of ISO volume = 6282, HFS extra = 593) Total translation table size: 0 Total rockridge attributes bytes: 279 Total directory bytes: 0 Path table size(bytes): 10 Max brk space used 0 7025 extents written (13 MB) Creating hard disk image... done. QEMU emulator version 6.0.0 Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-ppc qemu package: qemu-6.0.0nb2 glib2 package: glib2-2.64.1 qemu-system-ppc \ -m 256 \ -drive file=/bracket/macppc/test/2022.12.11.01.36.49/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive file=/bracket/macppc/test/2022.12.11.01.36.49/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on,index=2 \ -prom-env boot-device=cd:,netbsd-INSTALL \ -boot d \ -M mac99 \ -prom-env qemu_boot_hack=y child pid is 27174 >> ============================================================= >> OpenBIOS 1.1 [Mar 16 2021 08:16] >> Configuration device id QEMU version 1 machine id 1 >> CPUs: 1 >> Memory: 256M >> UUID: 00000000-0000-0000-0000-000000000000 >> CPU type PowerPC,G4 milliseconds isn't unique. Welcome to OpenBIOS v1.1 built on Mar 16 2021 08:16 Trying cd:,netbsd-INSTALL... >> switching to new context: [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020, 2021, 2022 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.108 (INSTALL) #0: Sun Dec 11 03:20:50 UTC 2022 [ 1.0000000] root@babylon5.netbsd.org:/tmp/build/2022.12.11.01.36.49-macppc/obj/sys/arch/macppc/compile/INSTALL [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 231 MB [ 1.0000000] found openpic PIC at 80040000 [ 1.0000000] OpenPIC Version 1.2: Supports 1 CPUs and 64 interrupt sources. [ 1.0000000] bootpath: [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: 7400 (Revision 2.9), ID 0 (primary) [ 1.0000000] cpu0: HID0 0x809400a4, powersave: 1 [ 1.0000000] cpu0: 0.00 MHz L2 cache present but not enabled [ 1.0000000] uninorth0 at mainbus0 [ 1.0000000] pci0 at uninorth0 bus 0 [ 1.0000000] pchb0 at pci0 dev 11 function 0 [ 1.0000000] pchb0: vendor 106b product 001f (rev. 0x00) [ 1.0000000] obio0 at pci0 dev 12 function 0: addr 0x80000000 [ 1.0000000] obio0: enabling KeyLargo internal modem [ 1.0000000] cuda0 at obio0 offset 0x16000 irq 25 [ 1.0000000] nadb0 at cuda0: Apple Desktop Bus [ 1.0000000] iic at cuda0 not configured [ 1.0000000] zsc0 at obio0 irq 37,36 [ 1.0000000] zstty0 at zsc0 channel 0 (console i/o) [ 1.0000000] zstty1 at zsc0 channel 1 [ 1.0000000] wdc0 at obio0 offset 0x20000 irq 13, level triggered: DMA transfer [ 1.0000000] atabus0 at wdc0 channel 0 [ 1.0000000] wdc1 at obio0 offset 0x21000 irq 14, level triggered: DMA transfer [ 1.0000000] atabus1 at wdc1 channel 0 [ 1.0000000] ohci0 at pci0 dev 13 function 0: vendor 106b product 003f (rev. 0x00) [ 1.0000000] ohci0: interrupting at irq 28 [ 1.0000000] ohci0: OHCI version 1.0 [ 1.0000000] usb0 at ohci0: USB revision 1.0 [ 1.0000000] genfb0 at pci0 dev 14 function 0: vendor 1234 product 1111 (rev. 0x02) [ 1.0000000] gem0 at pci0 dev 15 function 0: vendor 106b product 0021 (rev. 0x01) [ 1.0000000] gem0: interrupting at irq 30 [ 1.0000000] gem0: cannot reset receiver [ 1.0000000] gem0: cannot reset transmitter [ 1.0000000] bmtphy0 at gem0 phy 0: BCM5201 10/100 media interface, rev. 0 [ 1.0000000] bmtphy0: 100baseTX-FDX, auto [ 1.0000000] gem0: Ethernet address 52:54:00:12:34:56, 20KB RX fifo, 9KB TX fifo [ 1.0000000] vmmask 7f000000 schedmask 7f000000 highmask 7f000000 [ 1.0264248] WARNING: system needs entropy for security; see entropy(7) [ 1.0464496] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 3.3879648] adbkbd0 at nadb0 addr 2: mapped device (0) [ 7.1697339] wd0 at atabus0 drive 0 [ 7.1697339] wd0: [ 7.1697339] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 7.1896743] atapibus0 at atabus1: 2 targets [ 7.1896743] cd0 at atapibus0 drive 0: cdrom removable [ 13.5525791] wskbd0 at adbkbd0 mux 1 [ 13.5525791] nadb0: ADB relative pointing device not configured [ 13.6815122] WARNING: 2 errors while detecting hardware; check system log. [ 13.6815122] boot device: [ 13.6815122] root on md0a dumps on md0b [ 13.6815122] root file system type: ffs [ 13.6815122] kern.module.path=/stand/macppc/9.99.108/modules erase ^H, werase ^W, kill ^U, intr ^C, status ^T Terminal type? [vt100] xterm Erase is backspace. (I)nstall, (S)hell or (H)alt ? i NetBSD/macppc 9.99.108 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in English xx b: Messages d'installation en franXais xx c: Installation auf Deutsch xx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-9.99.108 Install System xx xx>a: Install NetBSD to hard disk xx b: Upgrade NetBSD on a hard disk xx c: Re-install sets or install additional sets xx d: Reboot the computer xx e: Utility menu xx f: Config menu xx x: Exit Install System xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xx xx>a: wd0 (1.5G, QEMU HARDDISK) xx b: Extended partitioning xx x: Exit xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 1536M. A full installation requires at least 988M without X and at least 1244M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do? xx xx>a: Set sizes of NetBSD partitions xx b: Use default partition sizes xx x: Cancel xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1171456 (2883584) + / b: 262144 c: 0 /tmp (mfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1712128 sec. a: 1171456 (2883584) + / >b: 262144 b: 262144 >c: 0 /tmp (mfs) c: 0 /tmp (mfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1712128 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs. Total size: 1536M, free: 0B Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a: 0 2883583 2883584 FFS IN / b: 2883584 3145727 262144 swap c: 0 3145727 3145728 Whole disk ------------ ------------ ------------ -------- ---- ---------------- e: Change input units (sectors/cylinders/MB/GB) f: Edit name of the disk g: Clone external partition(s) h: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Status: RunningCommand: /sbin/newfs -V2 -O 1 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq newfs: /dev/rwd0a: open for read: Device not configured Command failedHit enter to continue NetBSD/macppc 9.99.108 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-9.99.108 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install SystemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 157, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2354, in install self._install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 1473, in _install self._install_using_sysinst() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2034, in _install_using_sysinst 10800) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 242, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 344, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 372, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-ppc args: ['/usr/pkg/bin/qemu-system-ppc', '-m', '256', '-drive', 'file=/bracket/macppc/test/2022.12.11.01.36.49/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/macppc/test/2022.12.11.01.36.49/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on,index=2', '-prom-env', 'boot-device=cd:,netbsd-INSTALL', '-boot', 'd', '-M', 'mac99', '-prom-env', 'qemu_boot_hack=y'] buffer (last 100 chars): b'System\x1b[22;64H\x1b(0x\x1b(B\x1b[23;16H\x1b(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x1b[16;17H\x1b[39;49m' before (last 100 chars): b'System\x1b[22;64H\x1b(0x\x1b(B\x1b[23;16H\x1b(0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x1b[16;17H\x1b[39;49m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 27174 child_fd: 9 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b'(?!)') 1: re.compile(b'a: Progress bar') 2: re.compile(b'Select medium|Install from') 3: re.compile(b'Enter the CDROM device') 4: re.compile(b'unused-group-should-not-match') 5: re.compile(b'Hit enter to continue') 6: re.compile(b'b: Use serial port com0') 7: re.compile(b'Please choose the timezone') 8: re.compile(b'essential things') 9: re.compile(b'Configure the additional items') 10: re.compile(b'Multiple CDs found') 11: re.compile(b'The following are the http site') 12: re.compile(b'Is the network information you entered accurate') 13: re.compile(b'I have found the following network interface') 14: re.compile(b'Which network device would you like to use') 15: re.compile(b'No allows you to continue anyway') 16: re.compile(b"Can't connect to") 17: re.compile(b'/sbin/newfs') 18: re.compile(b'Do you want to install the NetBSD bootcode') 19: re.compile(b'Do you want to update the bootcode in the Master Boot Record to the latest') 20: re.compile(b'([a-z]): Custom installation') 21: re.compile(b'(?!)') 22: re.compile(b'a: This is the correct geometry') 23: re.compile(b'a: Use one of these disks') 24: re.compile(b'([a-z]): Set sizes of NetBSD partitions') 25: re.compile(b'(?!)') 26: re.compile(b'a partitioning scheme') 27: re.compile(b'([a-z]): Use the entire disk') 28: re.compile(b'(?!)') 29: re.compile(b'Do you want to install the NetBSD bootcode') 30: re.compile(b'Do you want to update the bootcode') 31: re.compile(b'Please enter a name for your NetBSD disk') 32: re.compile(b'ready to install NetBSD on your hard disk') 33: re.compile(b'We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions') 34: re.compile(b'Your disk currently has a non-NetBSD partition') 35: re.compile(b'Sysinst could not automatically determine the BIOS geometry of the disk') 36: re.compile(b'Do you want to re-edit the disklabel partitions') 37: re.compile(b'Command: ') 38: re.compile(b'not enough entropy') 39: re.compile(b'Changing local password for root') 10872.27 real 80.32 user 87.11 sys