This is anita version 1.46 Using pexpect version 4.6.0 /usr/pkg/bin/anita \ --workdir=/bracket/pmax/test/2019.01.21.02.28.25/anita \ --structured-log-file=/bracket/pmax/test/2019.01.21.02.28.25/install.slog \ --vmm-args= \ --test-timeout \ 172800 \ install \ file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/ Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/modules.tgz... OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/base.tgz... OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/etc.tgz... OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/comp.tgz... OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/misc.tgz... OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/tests.tgz... OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.21.02.28.25/release/pmax/binary/sets/tests.tar.xz... missing but optional, so that's OK makefs \ -t \ cd9660 \ -o \ rockridge \ /bracket/pmax/test/2019.01.21.02.28.25/anita/install_tmp.iso \ /bracket/pmax/test/2019.01.21.02.28.25/anita/download Creating hard disk image... done. gxemul \ -M \ 128M \ -d \ /bracket/pmax/test/2019.01.21.02.28.25/anita/wd0.img \ -e3max \ -d \ /bracket/pmax/test/2019.01.21.02.28.25/anita/install_tmp.iso \ /bracket/pmax/test/2019.01.21.02.28.25/anita/download/pmax/binary/kernel/netbsd-INSTALL.gz child pid is 16196 GXemul 0.6.0.1 Copyright (C) 2003-2014 Anders Gavare Read the source code and/or documentation for other Copyright messages. Simple setup... net: simulated network: 10.0.0.0/8 (max outgoing: TCP=100, UDP=100) simulated gateway+nameserver: 10.0.0.254 (60:50:40:30:20:10) simulated nameserver uses real nameserver 140.160.30.203 machine: memory: 128 MB cpu0: R3000 (I+D = 4+4 KB) machine: DECstation 5000/200 (3MAX, KN02) (25.00 MHz) bootstring(+bootarg): boot 5/rz0/netbsd-INSTALL.gz -a diskimage: /bracket/pmax/test/2019.01.21.02.28.25/anita/wd0.img SCSI DISK id 0, read/write, 1536 MB (3145728 sectors) diskimage: /bracket/pmax/test/2019.01.21.02.28.25/anita/install_tmp.iso SCSI CD-ROM id 1, read-only, 177 MB (362708 sectors) gunziping /bracket/pmax/test/2019.01.21.02.28.25/anita/download/pmax/binary/kernel/netbsd-INSTALL.gz loading /tmp/gxemul.xqcEVgw7uEkT removing /tmp/gxemul.xqcEVgw7uEkT cpu0: starting at 0x80030000 NOTE: This is a LEGACY emulation mode. ------------------------------------------------------------------------------- [ 1.0000000] segment 0 start 00000000 size 08000000 [ 1.0000000] phys segment: 0x8000000 @ 0 [ 1.0000000] adding 0x214000 @ 0x5ec000 to freelist 1 [ 1.0000000] adding 0x7800000 @ 0x800000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.30 (RAMDISK) #0: Mon Jan 21 05:27:30 UTC 2019 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2019.01[ 3.0195392] sd0 at scsibus0 target 0 lun 0: disk fixed [ 3.0234455] sd0: 1536 MB, 1536 cyl, 16 head, 128 sec, 512 bytes/sect x 3145729 sectors [ 3.0234455] sd0: async, 8-bit transfers [ 3.0234455] cd0 at scsibus0 target 1 lun 0: cdrom removable [ 3.0234455] cd0: async, 8-bit transfers [ 3.0234455] boot device: sd0 [ 3.0234455] label: 0 [ 3.0234455] root on md0a dumps on md0b [ 3.0234455] root file system type: ffs [ 3.0234455] kern.module.path=/stand/pmax/8.99.30/modules Terminal type? [vt100] xterm Erase set to backspace. erase ^?, werase ^W, kill ^U, intr ^C NetBSD/pmax 8.99.30 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXaisis xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.30 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes[ 4.8750080] label: 0 [ 4.8789142] label: 0 On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: sd0 (1.5G, DEC RZ58 (C) DEC)xx b: Extended partitioningxx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj[ 4.9843830] label: 0 [ 4.9843830] label: 0 [ 5.0781330] label: 0 NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1536 Megabytes. A full installation requires at least 992 Megabytes without X and at least 1248 Megabytes if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 1120 (1408) 1120 2293760 + / b: 128128 262144 swap c: 000 /tmp (mfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 288 MB, 5 free partitions. a: 1120 (1408) 1120 2293760 + / >b: 128 128 262144 swap b: 128 128 262144 swap >c: 0 0 0 /tmp (mfs) c: 0 0 0 /tmp (mfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 288 MB, 5 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Traceback (most recent call last): File "/usr/pkg/bin/anita", line 151, in status = main() File "/usr/pkg/bin/anita", line 132, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1767, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1700, in _install child.expect("x: Partition sizes ok") File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 173, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 119, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 82, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '128M', '-d', '/bracket/pmax/test/2019.01.21.02.28.25/anita/wd0.img', '-e3max', '-d', '/bracket/pmax/test/2019.01.21.02.28.25/anita/install_tmp.iso', '/bracket/pmax/test/2019.01.21.02.28.25/anita/download/pmax/binary/kernel/netbsd-INSTALL.gz'] buffer (last 100 chars): '39;49m\x1b[37m\x1b[44m\x1b[K\r\r\n \x1b[39;49m\x1b[37m\x1b[44m\x1b[K\r\r\n \x1b[39;49m\x1b[37m\x1b[44m\x1b[K\r\r\n \x1b[39;49m\x1b[37m\x1b[44m' before (last 100 chars): '39;49m\x1b[37m\x1b[44m\x1b[K\r\r\n \x1b[39;49m\x1b[37m\x1b[44m\x1b[K\r\r\n \x1b[39;49m\x1b[37m\x1b[44m\x1b[K\r\r\n \x1b[39;49m\x1b[37m\x1b[44m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 16196 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile('x: Partition sizes ok') 635.46 real 0.54 user 5.45 sys