This is anita version 1.47 Using pexpect version 4.6.0 /usr/pkg/bin/anita \ --workdir=/bracket/pmax/test/2019.01.30.02.44.19/anita \ --structured-log-file=/bracket/pmax/test/2019.01.30.02.44.19/install.slog \ --vmm-args= \ --test-timeout \ 172800 \ install \ file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/ Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/modules.tgz... OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/base.tgz... OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/etc.tgz... OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/comp.tgz... OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/misc.tgz... OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/tests.tgz... OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/pmax/test/2019.01.30.02.44.19/release/pmax/binary/sets/tests.tar.xz... missing but optional, so that's OK makefs \ -t \ cd9660 \ -o \ rockridge \ /bracket/pmax/test/2019.01.30.02.44.19/anita/install_tmp.iso \ /bracket/pmax/test/2019.01.30.02.44.19/anita/download Creating hard disk image... done. gxemul \ -M \ 128M \ -d \ /bracket/pmax/test/2019.01.30.02.44.19/anita/wd0.img \ -e3max \ -d \ /bracket/pmax/test/2019.01.30.02.44.19/anita/install_tmp.iso \ /bracket/pmax/test/2019.01.30.02.44.19/anita/download/pmax/binary/kernel/netbsd-INSTALL.gz child pid is 14439 GXemul 0.6.0.1 Copyright (C) 2003-2014 Anders Gavare Read the source code and/or documentation for other Copyright messages. Simple setup... net: simulated network: 10.0.0.0/8 (max outgoing: TCP=100, UDP=100) simulated gateway+nameserver: 10.0.0.254 (60:50:40:30:20:10) simulated nameserver uses real nameserver 140.160.30.203 machine: memory: 128 MB cpu0: R3000 (I+D = 4+4 KB) machine: DECstation 5000/200 (3MAX, KN02) (25.00 MHz) bootstring(+bootarg): boot 5/rz0/netbsd-INSTALL.gz -a diskimage: /bracket/pmax/test/2019.01.30.02.44.19/anita/wd0.img SCSI DISK id 0, read/write, 1536 MB (3145728 sectors) diskimage: /bracket/pmax/test/2019.01.30.02.44.19/anita/install_tmp.iso SCSI CD-ROM id 1, read-only, 177 MB (363280 sectors) gunziping /bracket/pmax/test/2019.01.30.02.44.19/anita/download/pmax/binary/kernel/netbsd-INSTALL.gz loading /tmp/gxemul.EnvcoEpaXU1V removing /tmp/gxemul.EnvcoEpaXU1V cpu0: starting at 0x80030000 NOTE: This is a LEGACY emulation mode. ------------------------------------------------------------------------------- [ 1.0000000] segment 0 start 00000000 size 08000000 [ 1.0000000] phys segment: 0x8000000 @ 0 [ 1.0000000] adding 0x21f000 @ 0x5e1000 to freelist 1 [ 1.0000000] adding 0x7800000 @ 0x800000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.32 (RAMDISK) #0: Wed Jan 30 09:05:14 UTC 2019 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2019.01.30.02.44.19-pmax/obj/sys/arch/pmax/compile/RAMDISK [ 1.0000000] DECstation 5000/200 (3MAX) [ 1.0000000] total memory = 128 MB [ 1.0000000] avail memory = 119 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: MIPS R3000 CPU (0x220) Rev. 2.0 with MIPS R3010 FPC Rev. 4.0 [ 1.0000000] cpu0: 4KB/4B direct-mapped Instruction cache, 64 TLB entries [ 1.0000000] cpu0: 4KB/4B direct-mapped write-through Data cache [ 1.0000000] tc0 at mainbus0: 25 MHz clock [ 1.0000000] ibus0 at tc0 slot 7 offset 0x0 [ 1.0000000] mcclock0 at ibus0 addr 0x1fe80000: mc146818 or compatible [ 1.0000000] dz0 at ibus0 addr 0x1fe00000: DC-7085, 4 lines [ 1.0000000] lkkbd0 at dz0 line 0 XXXXXXXXXXXXXXXXXX[ 1.0000000] lkkbd0: no keyboard [ 1.0000000] wskbd0 at lkkbd0 mux 1 [ 1.0000000] le0 at tc0 slot 6 offset 0x0: address 10:20:30:00:00:10 [ 1.0000000] le0: 32 receive buffers, 8 transmit buffers [ 1.0000000] asc0 at tc0 slot 5 offset 0x0: NCR53C94, 25MHz, SCSI ID 7 [ 1.0000000] scsibus0 at asc0: 8 targets, 8 luns per target [ 1.0039142] scsibus0: waiting 2 seconds for devices to settle... [ 3.0078205] sd0 at scsibus0 target 0 lun 0: disk fixed [ 3.0078205] sd0: 1536 MB, 1536 cyl, 16 head, 128 sec, 512 bytes/sect x 3145729 sectors [ 3.0078205] sd0: async, 8-bit transfers [ 3.0078205] cd0 at scsibus0 target 1 lun 0: cdrom removable [ 3.0078205] cd0: async, 8-bit transfers [ 3.0078205] boot device: sd0 [ 3.0078205] label: 0 [ 3.0078205] root on md0a dumps on md0b [ 3.0078205] root file system type: ffs [ 3.0078205] kern.module.path=/stand/pmax/8.99.32/modules Terminal type? [vt100] xterm Erase set to backspace. erase ^?, werase ^W, kill ^U, intr ^C NetBSD/pmax 8.99.32 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXaisis xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.32 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes[ 4.9961017] label: 0 [ 4.9961017] label: 0 On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: sd0 (1.5G, DEC RZ58 (C) DEC)xx b: Extended partitioningxx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj[ 5.1211017] label: 0 [ 5.1211017] label: 0 [ 5.1679767] label: 0 NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1536 Megabytes. A full at least 992 Megabytes without X and at least 1248 Megabytes if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 1120 (1408) 1120 2293760 + / b: 128128 262144 swap c: 000 /tmp (mfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 288 MB, 5 free partitions. a: 1120 (1408) 1120 2293760 + / >b: 128 128 262144 swap b: 128 128 262144 swap >c: 0 0 0 /tmp (mfs) c: 0 0 0 /tmp (mfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 288 MB, 5 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1407 1408 FFSv1 Yes Yes / b: 1408 1535128 swap c:0 1535 1536 Whole disk d:000 unused e: Show all unused partitions f: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [RZ58 (C) DE]: Ok, we are now ready to install NetBSD on your hard disk (sd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Status: RunningCommand: disklabel -w -r -f /tmp/disktab sd0 'RZ58 (C) DE' -------------------------------------------------------------------------------- FinishedHit enter to continue Status: RunningCommand: /sbin/newfs -V2 -O 1 -b 16384 -f 2048 /dev/rsd0a --------------------------------------------------------------------------------/dev/rsd0a: 1408.0MB (2883584 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 176.00MB, 11264 blks, 22272 inodes. ...............................................................................Finished Installing boot blocks on sd0.... Status: RunningCommand: /usr/sbin/installboot /dev/rsd0c /usr/mdec/bootxx_ffs --------------------------------------------------------------------------------Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are -some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. - - Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel (GENERIC_USB)No c: Kernel modulesYes d: BaseYes e: Configuration files (/etc) Yes f: Compiler toolsNo g: GamesNo h: Manual pagesNo i: MiscellaneousNo j: Test programsNo k: Text processing toolsNo l: X11 setsNone m: Source and debug sets None >x: Install selected sets>f: Compiler tools No x: Install selected setsYes f: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >j: Test programs NoYes j: Test programs Yes >l: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets l: X11 sets None >m: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets m: Source and debug sets None >x: Install selected sets Status: Finished Command: /usr/sbin/installboot /dev/rsd0c /usr/mdec/bootxx_ffs -------------------------------------------------------------------------------- Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, -you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVDxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directory xx h: Skip setxx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj[ 16.4296955] label: 0 - Enter the CDROM device to be used and directory on the CDROM where the distribution is located. -Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory/pmax/binary/sets c: Source set directory/source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//pmax/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA47% |****************2544 KiB 2.31 M00:01 ETA7**********4160020 ETA100*********| 53524 Finished Status: RunningCommand: progress -zf /mnt2//pmax/binary/sets/modules.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA27% |*********1904 KiB 1.83 M00:02 ETA44******30724976***********5240700 ETA100*********| 6876755 Finished Status: RunningCommand: progress -zf /mnt2//pmax/binary/sets/base.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA1280 KiB 1.24 M01:55 ETA2400911 ETA4% |*605660 ETA58492.005 ETA7% |**1054448246210% |***5408101 ETA16880053% |****98410:57 ETA42112069 ETA6*3896116 ETA75152048 ETA8*769676 ETA9906427 ETA21*3172864 ETA2328024*558443 ETA5768022 ETA6*96031 ETA84196819*317600 ETA30530449 ETA16061.9550 ETA3*92002.0047 ETA4505441.976*34882.005 ETA746401.978*734493 ETA40*899271612392 ETA232161 ETA4*488070 ETA57088839 ETA6*852687097677 ETA2040550*501675 ETA1620853*855264 ETA4998453 ETA6*8280071 ETA7460858*670460 ETA60*88228 ETA190543*292876 ETA407255662465 ETA6*795254 ETA8 98 M63 ETA942 ETA70*10151 ETA1340 ETA3*5519 ETA478 ETA6*97 ETA7116 ETA8*345 ETA80*554 ETA22842 ETA924*2231 ETA5320 ETA7*5309 ETA6087898 ETA9*8890977 ETA3061156 ETA2*35 ETA343454 ETA5*73 ETA8* | 14151 ETA920 ETA331100*79 Finished Status: RunningCommand: progress -zf /mnt2//pmax/binary/sets/etc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA80% |****************************3328 KiB 3.22 M00:00 ETA95***** | 39601.87100**| 41372 Finished Status: RunningCommand: progress -zf /mnt2//pmax/binary/sets/comp.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA1440 KiB 1.38 M04:10 ETA145042.12:37 ETA58721.893:00 ETA284962.052:45 ETA101441.953 ETA3% |*29762.1039 ETA448240641 ETA6301.987 ETA589682.050 ETA98241.939 ETA6% |**2245693 ETA3280851 ETA762889643 ETA734408 ETA89734 ETA316606 ETA9% |***364833 ETA5024895 ETA10616858 ETA846475 ETA1940838 ETA416446 ETA268019 ETA2% |****46967 ETA527651 ETA3660042 ETA784824 ETA95043 ETA45088814 ETA2016695 ETA5*3538420058 ETA59847 ETA6744046 ETA6006472 ETA716888*48807146 ETA66885 ETA9891222 ETA20*71408439 ETA395256 ETA1704092 ETA290880 ETA3*824808226 ETA317 ETA466433 ETA80322591264519 ETA6*26564576066 ETA77525 ETA8995273 ETA 99 M2 ETA9*1011 ETA3809 ETA30571796 ETA877 ETA2*1185 ETA273583 ETA674881 ETA200 ETA5*21:59 ETA48 ETA667 ETA7995 ETA3088*293 ETA3896900 ETA88940*419048 ETA1317 ETA56 ETA274 ETA803*5112 ETA204510 ETA5609138 ETA6*607 ETA26 ETA74505 ETA8813 ETA909*712 ETA289505900 ETA689189029 ETA80898 ETA2*2906 ETA345 ETA64 ETA483 ETA9895*92901 ETA389669019 ETA772007 ETA8*26 ETA9514 ETA722 ETA60*9120 ETA13126208 ETA77 ETA3*96 ETA2115 ETA4324 ETA53 ETA572 ETA6*3030 ETA127430:58 ETA5886 ETA95 ETA9*4244 ETA70433 ETA641 ETA182*5049 ETA38 ETA344756 ETA845 ETA5*6154 ETA343 ETA6552 ETA741 ETA770539 ETA8*18 ETA47 ETA9666 ETA855 ETA80*8164 ETA53 ETA1462 ETA2651 ETA3*9629 ETA90437 ETA56 ETA575 ETA6*974 ETA3013 ETA7462 ETA861 ETA750 ETA849319 ETA9*21011089828 ETA7903654457 ETA321607918776584321906 ETA6987652*2032110598762543210349345 ETA584 ETA67473 ETA692 ETA301 ETA5*120 ETA364509 ETA58 ETA647 ETA3727816 ETA093985 ETA4076548*134 ETA210229873 ETA36543422 ETA9511 ETA600 ETA7100* Finished Status: RunningCommand: progress -zf /mnt2//pmax/binary/sets/misc.tgz tar --chroot -xhepf ---------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA19% |******2928 KiB 2.81 M00:04 ETA27***4224045 ETA44******6832213 ETA52***79681.9463****975202 ETA7***113187*8886586****329621 ETA92** | 1410450 ETA100***| 153003 Finished Status: RunningCommand: progress -zf /mnt2//pmax/binary/sets/tests.tgz tar --chroot -xhepf - --------------------------------------------------------------------------------0% || 00.00 KiB/s --:-- ETA1464 KiB 460.401:23 ETA5% |*1968 KiB 980.170:37 ETA7% |**3072 KiB 0.98 M5 ETA14% |****56161.3623 ETA7*676818817 ETA8*7360029 ETA20*784 KiB 971.57 K31 ETA6**10136 KiB 1.09 M25 ETA9*1552123 ETA33*297651 ETA9**5408218 ETA40*696179 ETA1624034*715218 ETA51**994425 ETA8***2264092 ETA63**4536330 ETA8*6608 ETA72**820877 ETA8**30320405 ETA80*1216384*2894 ETA7*37773 ETA93** | 36272411 ETA6* | 3723398* | 3834480 ETA100*| 387604Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: RunningCommand: /bin/sh MAKEDEV all --------------------------------------------------------------------------------Finished Status: RunningCommand: /etc/rc.d/random_seed stop --------------------------------------------------------------------------------Saved entropy to /var/db/entropy-file. Finished The extraction of the selected sets for NetBSD-8.99.32 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj The extraction of the selected sets for NetBSD-8.99.32 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqk x>Hit enter to continue x mqqqqqqqqqqqqqqqqqqqqqqqj e: Enable installation of binary packagesinstall f: Fetch and unpack pkgsrcinstall g: Enable sshdNO h: Enable ntpdNO i: Run ntpdate at bootNO j: Enable mdnsdNO k: Enable xdmNO l: Enable cgdYES m: Enable lvmNO n: Enable raidframeYES o: Add a user >x: Finished configuringTraceback (most recent call last): File "/usr/pkg/bin/anita", line 151, in status = main() File "/usr/pkg/bin/anita", line 132, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1798, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1526, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 179, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 119, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 82, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '128M', '-d', '/bracket/pmax/test/2019.01.30.02.44.19/anita/wd0.img', '-e3max', '-d', '/bracket/pmax/test/2019.01.30.02.44.19/anita/install_tmp.iso', '/bracket/pmax/test/2019.01.30.02.44.19/anita/download/pmax/binary/kernel/netbsd-INSTALL.gz'] buffer (last 100 chars): '6HNO\r\r\n n: Enable raidframe\x1b[18;56HYES\r\r\n o: Add a user\r\r\n>\x1b[7mx: Finished configuring\r\x1b[27m\x1b[39;49m' before (last 100 chars): '6HNO\r\r\n n: Enable raidframe\x1b[18;56HYES\r\r\n o: Add a user\r\r\n>\x1b[7mx: Finished configuring\r\x1b[27m\x1b[39;49m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 14439 child_fd: 13 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(Select medium|Install from)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11300.05 real 10.55 user 7.54 sys