This is anita version 2.11 Using pexpect version 4.8.0 /usr/pkg/bin/anita \ --workdir=/bracket/pmax/test/2020.08.30.20.08.47/anita \ --structured-log-file=/bracket/pmax/test/2020.08.30.20.08.47/test.slog \ --vmm-args= \ --test-timeout 10800 \ test \ file:///bracket/pmax/release/2020.08.30.20.08.47/release/pmax/ gxemul \ -M 128M \ -d /bracket/pmax/test/2020.08.30.20.08.47/anita/wd0.img \ -e3max \ -d /bracket/pmax/test/2020.08.30.20.08.47/anita/tests-results.img child pid is 19153 GXemul 0.7.0 Copyright (C) 2003-2021 Anders Gavare Read the source code and/or documentation for other Copyright messages. net: simulated network: 10.0.0.0/8 (max outgoing: TCP=100, UDP=100) gateway+nameserver: 10.0.0.254 (60:50:40:30:20:10) (could not determine real nameserver from /etc/resolv.conf) machine: model: DECstation 5000/200 (3MAX, KN02) clock speed: 25.00 MHz bootstring & bootarg: boot 5/rz0/ -a cpu: R3000 (32-bit, I+D = 4+4 KB, L2 = 0 KB) memory: 128 MB diskimage: /bracket/pmax/test/2020.08.30.20.08.47/anita/wd0.img SCSI DISK id 0, read/write, 1536 MB (3145968 512-byte blocks) diskimage: /bracket/pmax/test/2020.08.30.20.08.47/anita/tests-results.img SCSI DISK id 1, read/write, 100 MB (205632 512-byte blocks) DEC boot: loadaddr=0xa0700000, pc=0xa0700000 13 blocks cpu0: starting at 0xa0700000 ------------------------------------------------------------------------------- NetBSD/pmax 9.99.72 FFSv1 Primary Bootstrap NetBSD/pmax 9.99.72 Secondary Bootstrap, Revision 1.5 (Mon Mar 11 23:57:57 UTC 2024) Boot: 5/rz0/ Loading: 5/rz0/netbsd.pmax |/-\|/-\open 5/rz0/netbsd.pmax: No such file or directory Loading: 5/rz0/netbsd |/-\|5639440/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+158016\|/- [264816\|/-\|/-\|/-\|/-+261603\|/-\|/-\|/-\|/-\]=0x6083b0 Starting at 0x80030000 [ 1.0000000] mips_fixup_stubs: 8134 fixups done in 0 cycles [ 1.0000000] Loaded initial symtab at 0x805b7b5c, strtab at 0x805f85cc, # entries 16530 [ 1.0000000] mcclock: iters 1497 computed MHz 12, instrs per usec=8 [ 1.0000000] segment 0 start 00000000 size 08000000 [ 1.0000000] phys segment: 0x8000000 @ 0 [ 1.0000000] adding 0x1c5000 @ 0x63b000 to freelist 1 [ 1.0000000] adding 0x7800000 @ 0x800000 to freelist 0 [ 1.0000000] pool redzone disabled for 'kmem-04096' [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.72 (GENERIC) #0: Tue Mar 12 00:03:41 UTC 2024 [ 1.0000000] root@babylon5.netbsd.org:/tmp/build/2020.08.30.20.08.47-pmax/obj/sys/arch/pmax/compile/GENERIC [ 1.0000000] DECstation 5000/200 (3MAX) [ 1.0000000] total memory = 128 MB [ 1.0000000] avail memory = 118 MB [ 1.0000000] pool redzone disabled for 'buf4k' [ 1.0000000] pool redzone disabled for 'buf64k' [ 1.0000000] entropy: no seed from bootloader [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: MIPS R3000 CPU (0x220) Rev. 2.0 with MIPS R3010 FPC Rev. 4.0 [ 1.0000000] cpu0: 4KB/4B direct-mapped Instruction cache, 64 TLB entries [ 1.0000000] cpu0: 4KB/4B direct-mapped write-through Data cache [ 1.0000000] tc0 at mainbus0: 25 MHz clock [ 1.0000000] ibus0 at tc0 slot 7 offset 0x0 [ 1.0000000] mcclock0 at ibus0 addr 0x1fe80000: mc146818 or compatible [ 1.0000000] dz0 at ibus0 addr 0x1fe00000: DC-7085, 4 lines [ 1.0000000] lkkbd0 at dz0 line 0 XXXXXXXXXXXXXXXXXX[ 1.0000000] lkkbd0: no keyboard [ 1.0000000] wskbd0 at lkkbd0 mux 1 [ 1.0000000] vsms0 at dz0 line 1 [ 1.0000000] wsmouse0 at vsms0 mux 0 [ 1.0000000] le0 at tc0 slot 6 offset 0x0: address 10:20:30:00:00:10 [ 1.0000000] le0: 32 receive buffers, 8 transmit buffers [ 1.0000000] asc0 at tc0 slot 5 offset 0x0: NCR53C94, 25MHz, SCSI ID 7 [ 1.0000000] scsibus0 at asc0: 8 targets, 8 luns per target [ memory READ: from non-existant paddr=0x1f000000 len=4 pc=0x8004632c ] [ memory READ: from non-existant paddr=0x1f0003e0 len=1 pc=0x80062cb0 ] [ memory READ: from non-existant paddr=0x1f3c03e0 len=1 pc=0x80062cb0 ] [ memory READ: from non-existant paddr=0x1ec00000 len=4 pc=0x8004632c ] [ memory READ: from non-existant paddr=0x1ec003e0 len=1 pc=0x80062cb0 ] [ memory READ: from non-existant paddr=0x1efc03e0 len=1 pc=0x80062cb0 ] [ 1.0000000] entropy: WARNING: extracting entropy too early [ 1.0000000] cpu0 has 1 core siblings: cpu0 [ 1.0000000] cpu0 has 1 pkg siblings: cpu0 [ 1.0000000] cpu0 has 1 1st siblings: cpu0 [ 1.0000000] cpu0 first in package: cpu0 [ 1.0039092] scsibus0: waiting 2 seconds for devices to settle... [ 3.0078155] sd0 at scsibus0 target 0 lun 0: disk fixed [ 3.0078155] sd0: 1536 MB, 3121 cyl, 16 head, 63 sec, 512 bytes/sect x 3145968 sectors [ 3.0078155] sd0: async, 8-bit transfers [ 3.0078155] sd1 at scsibus0 target 1 lun 0: disk fixed [ 3.0078155] sd1: 100 MB, 204 cyl, 16 head, 63 sec, 512 bytes/sect x 205632 sectors [ 3.0078155] sd1: async, 8-bit transfers [ 3.0078155] sd1: no disk label [ 3.0156280] sd1: no disk label [ 3.0234405] boot device: sd0 [ 3.0234405] root on sd0a dumps on sd0b [ 3.0234405] mountroot: trying lfs... [ 3.0234405] mountroot: trying ffs... [ 3.0234405] root file system type: ffs [ 3.0234405] kern.module.path=/stand/pmax/9.99.72/modules [ 3.0234405] init: copying out path `/sbin/init' 11 Sat Mar 13 00:15:15 UTC 2021 Starting root file system check: /dev/rsd0a: 19444 files, 293905 used, 415778 free (4178 frags, 51450 blocks, 0.6% fragmentation) /dev/rsd0a: MARKING FILE SYSTEM CLEAN swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: rndctl: no entropy in seed [ 12.9140655] entropy: WARNING: consolidating less than full entropy Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for duplicate address detection to finish... Building databases: dev, utmp, utmpx, services. Starting syslogd. Could not open /dev/crypto: Device not configured Mounting all file systems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Starting postfix. Mar 13 00:15:44 postfix[742]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Sat Mar 13 00:15:47 UTC 2021 NetBSD/pmax (Amnesiac) (constty) login: NetBSD/pmax (Amnesiac) (constty) login: root Mar 13 00:15:50 login: ROOT LOGIN (root) on tty constty Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 9.99.72 (GENERIC) #0: Tue Mar 12 00:03:41 UTC 2024 Welcome to NetBSD! This system is running a development snapshot of the NetBSD operating system, also known as NetBSD-current. It is very possible that it has serious bugs, regressions, broken features or other problems. Please bear this in mind and use the system with care. You are encouraged to test this version as thoroughly as possible. Should you encounter any problem, please report it back to the development team using the send-pr(1) utility (requires a working MTA). If yours is not properly set up, use the web interface at: https://www.NetBSD.org/support/send-pr.html Thank you for helping us test and improve NetBSD. We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh # PS1='anita-root-shell-prom''pt-1710202552.452679# ' anita-root-shell-prompt-1710202552.452679# df -k | sed 's/^/df-pre-test /'; mkdi r /tmp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee /tmp/tests/test.tps | atf-report -o ticker:- -o ticker:/tmp/tests/test.txt -o xml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-result s.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results .css; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1} '` -lt 90000 && test ` status = main() File "/usr/pkg/bin/anita", line 154, in main status = a.run_tests(timeout = options.test_timeout) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2635, in run_tests timeout, [r'\d test cases', r'\[\d+\.\d+s\]']) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2671, in shell_cmd return shell_cmd(self.child, cmd, timeout, keepalive_patterns) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2746, in shell_cmd expect_with_keepalive(child, [prompt_re], timeout, keepalive_patterns) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2729, in expect_with_keepalive i = child.expect(all_patterns, timeout) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 255, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 344, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 372, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '128M', '-d', '/bracket/pmax/test/2020.08.30.20.08.47/anita/wd0.img', '-e3max', '-d', '/bracket/pmax/test/2020.08.30.20.08.47/anita/tests-results.img'] buffer (last 100 chars): b' Passed.\r\r\n write_PLAY_ALL: ' before (last 100 chars): b' Passed.\r\r\n write_PLAY_ALL: ' after: match: None match_index: None exitstatus: None flag_eof: False pid: 19153 child_fd: 9 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b'anita-root-shell-prompt-1710202552.452679# ') 1: re.compile(b'\\d test cases') 2: re.compile(b'\\[\\d+\\.\\d+s\\]') 14479.54 real 14106.08 user 340.40 sys