Downloading file:///bracket/sparc/test/2013.06.13.11.25.18/release/images/NetBSD-6.99.21-sparc.iso... Creating disk image... done. HJConfiguration device id QEMU version 1 machine id 32 CPUs: 1 x FMI,MB86904 UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.0 built on Jul 20 2011 21:16 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 65536 bytes entry point is 0x4000 bootpath: /iommu/sbus/espdma/esp/sd@2,0:d Jumping to entry point 00004000 for type 00000005... switching to new context: >> NetBSD/sparc Secondary Boot, Revision 1.15 (Thu Jun 13 20:54:08 UTC 2013) Booting netbsd 3073600+95152=0x305e00 OBP version 3, revision 2.25 (plugin rev 2) Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.21 (INSTALL) #0: Thu Jun 13 21:03:30 UTC 2013 bracket@babylon5.NetBSD.org:/tmp/bracket/build/2013.06.13.11.25.18-sparc/obj/sys/arch/sparc/compile/INSTALL total memory = 49152 KB avail memory = 44904 KB bootpath: /iommu0/sbus0/espdma0/esp0/sd@2,0:d mainbus0 (root): SUNW,SPARCstation-5: hostid 80000000 cpu0 at mainbus0: MB86907 @ 170 MHz, L64804 FPU cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled obio0 at mainbus0 clock0 at obio0 slot 0 offset 0x200000: mk48t08 timer0 at obio0 slot 0 offset 0xd00000: delay constant 74, frequency = 1000000 Hz zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 zstty0 at zs0 channel 0 (console i/o) zstty1 at zs0 channel 1 zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6 zstty2 at zs1 channel 0 zstty3 at zs1 channel 1 fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached auxreg0 at obio0 slot 0 offset 0x900000 power0 at obio0 slot 0 offset 0x910000 level 2 slavioconfig at obio0 slot 0 offset 0x800000 not configured iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB sbus0 at iommu0: clock = 21.250 MHz genfb0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) genfb0: 1024 x 768 at 8 bit genfb0: framebuffer at offset 0x0 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.21 (INSTALL) #0: Thu Jun 13 21:03:30 UTC 2013 bracket@babylon5.NetBSD.org:/tmp/bracket/build/2013.06.13.11.25.18-sparc/obj/sys/arch/sparc/compile/INSTALL total memory = 49152 KB avail memory = 44904 KB timecounter: Timecounters tick every 10.000 msec bootpath: /iommu0/sbus0/espdma0/esp0/sd@2,0:d mainbus0 (root): SUNW,SPARCstation-5: hostid 80000000 cpu0 at mainbus0: MB86907 @ 170 MHz, L64804 FPU cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled obio0 at mainbus0 clock0 at obio0 slot 0 offset 0x200000: mk48t08 timer0 at obio0 slot 0 offset 0xd00000: delay constant 74, frequency = 1000000 Hz timecounter: Timecounter "timer-counter" frequency 1000000 Hz quality 100 zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 zstty0 at zs0 channel 0 (console i/o) zstty1 at zs0 channel 1 zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6 zstty2 at zs1 channel 0 zstty3 at zs1 channel 1 fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached auxreg0 at obio0 slot 0 offset 0x900000 power0 at obio0 slot 0 offset 0x910000 level 2 slavioconfig at obio0 slot 0 offset 0x800000 not configured iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB sbus0 at iommu0: clock = 21.250 MHz genfb0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) genfb0: 1024 x 768 at 8 bit genfb0: framebuffer at offset 0x0 genfb0: framebuffer at 0xfe025000, size 1024x768, depth 8, stride 1024 wsdisplay1 at genfb0 kbdmux 1 dma0 at sbus0 slot 5 offset 0x8400000: DMA rev 2 esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7 scsibus0 at esp0: 8 targets, 8 luns per target ledma0 at sbus0 slot 5 offset 0x8400010: DMA rev 2 le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 52:54:00:12:34:56 le0: 8 receive buffers, 2 transmit buffers SUNW,CS4231 at sbus0 slot 4 offset 0xc000000 level 5 (ipl 9) not configured power-management at sbus0 slot 4 offset 0xa000000 not configured scsibus0: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: disk fixed sd0: fabricating a geometry sd0: 768 MB, 768 cyl, 64 head, 32 sec, 512 bytes/sect x 1572864 sectors sd0(esp0:0:0:0): esp0: timed out [ecb 0xf04d4f88 (flags 0x1, dleft 0, stat 0)], sd0(esp0:0:0:0): esp0: timed out [ecb 0xf04d4f88 (flags 0x41, dleft 0, stat 0)], AGAIN sd0: async, 8-bit transfers cd0 at scsibus0 target 2 lun 0: cdrom removable cd0(esp0:0:2:0): esp0: timed out [ecb 0xf04d4f88 (flags 0x1, dleft 0, stat 0)], cd0(esp0:0:2:0): esp0: timed out [ecb 0xf04d4f88 (flags 0x41, dleft 0, stat 0)], AGAIN cd0: async, 8-bit transfers root on md0a dumps on md0b root file system type: ffs Welcome to the NetBSD/sparc microroot setup utility. We've just completed the first stage of a two-stage procedure to load a fully functional NetBSD installation environment on your machine. In the second stage which is to follow now, a set of additional installation utilities must be load from your NetBSD/sparc installation medium. This procedure supports one of the following media: 1) cdrom 2) tape 3) floppy Installation medium to load the additional utilities from: cdrom cdrom The installation utilities are located on the ISO CD9660 filesystem on the NetBSD/sparc CD-ROM. We need to mount the filesystem from the CD-ROM device which you can specify below. Note: after the installation utilities are extracted this filesystem will be unmounted again. CD-ROM device to use [/dev/cd0a]: Path to instfs.tgz [/cdrom/sparc/installation/bootfs/instfs.tgz] cd0(esp0:0:2:0): command aborted, retrying, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 cd0(esp0:0:2:0): command aborted, retrying, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 cd0(esp0:0:2:0): command aborted, retrying, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 cd0(esp0:0:2:0): command aborted, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 cd0(esp0:0:2:0): command aborted, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 erase ^H, werase ^W, kill ^U, intr ^C Terminal type? [vt100] xterm xterm Erase7is5backspace.57G65G73G This installer now uses the new `sysinst' installer tool by default. To use the old install or upgrade shell scripts instead, enter the options (OI) for Old Install or (OU) for Old Upgrade. The script-based installers may be removed in a future release. (I)nstall/Upgrade, (H)alt or (S)hell? I I ?1049h?12l?25hH2J39;49m?1hH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49m C37m44mNetBSD/sparc 6.99.21 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. 39;49m13;17H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB14;17H0xB>7ma: Installation messages in English14;63H27m0xB15;17H0xB b: Messages d'installation en franais 0xB16;17H0xB c: Installation auf Deutsch16;63H0xB17;17H0xB d: Komunikaty instalacyjne w jezyku polskim 0xB18;17H0xB e: Mensajes de instalacion en castellano 0xB19;17H0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjB14;18H39;49m 13;17H39;49m37m44mK14;17H39;49m37m44mK15;17H39;49m37m44mK16;17H39;49m37m44mK17;17H39;49m37m44mK18;17H39;49m37m44mK19;17H39;49m37m44mK10;2H39;49m C39;49m37m44mIf you booted from a floppy, you may now remove the disk. 39;49m37m44mThank you for using NetBSD! 39;49m13;16H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB14;16H0xB NetBSD-6.99.21 Install System14;64H0xB15;16H0xB15;64H0xB16;16H0xB>7ma: Install NetBSD to hard disk16;64H27m0xB17;16H0xB b: Upgrade NetBSD on a hard disk17;64H0xB18;16H0xB c: Re-install sets or install additional sets 0xB19;16H0xB d: Reboot the computer19;64H0xB20;16H0xB e: Utility menu20;64H0xB21;16H0xB f: Config menu21;64H0xB22;16H0xB x: Exit Install System22;64H0xB23;16H0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjB16;17H39;49m H C37m44mYou have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things:39;49m37m44mK a) Partition your disk39;49m37m44mK b) Create new BSD file systems39;49m37m44mK c) Load and install distribution sets39;49m37m44mK d) Some initial system configuration39;49m37m44mK 39;49m37m44mK (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)39;49m37m44mK 39;49m37m44mK Shall we continue?39;49m37m44mK14;16H39;49m37m44mK15;16H39;49m37m44mK16;16H39;49m37m44mK17;16H39;49m37m44mK18;16H39;49m37m44mK19;16H39;49m37m44mK20;16H39;49m37m44mK21;16H39;49m37m44mK22;16H39;49m37m44mK23;16H39;49m37m44mK14;2H39;49m14;32H37m44m0lqqqqqqqqqqqqqqqkB15;32H0xB yes or no? 0xB16;32H0xB16;48H0xB17;32H0xB>7ma: No17;48H27m0xB18;32H0xB b: Yes18;48H0xB19;32H0mqqqqqqqqqqqqqqqjB17;33H39;49mb 37m44m a: No18;33H>7mb: Yes18;33H27m39;49msd0: fabricating a geometry sd0: no disk label H C39;49m37m44mK 39;49m37m44mK 39;49m37m44mK5;10H39;49m37m44mK6;10H39;49m37m44mK7;10H39;49m37m44mK8;10H39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK14;32H39;49m37m44mK15;32H39;49m37m44mK16;32H39;49m37m44mK17;32H39;49m37m44mK18;32H39;49m37m44mK19;32H39;49m37m44mKH39;49m C37m44mI found only one disk, sd0 (768M, QEMU QEMU HARDDISK). Therefore I assume you want to install NetBSD on it. 39;49m11;28H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqkB12;28H0xB>7mHit enter to continueC27m0xB13;28H0mqqqqqqqqqqqqqqqqqqqqqqqjB12;29H39;49m H2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49m C37m44mThe NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are not needed by all installations. You may choose to install a core set (Minimal installation), all of them (Full installation) or you select from the optional distribution sets. 39;49m13;25H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB14;25H0xB Select your distribution 0xB15;25H0xB15;55H0xB16;25H0xB>7ma: Full installation16;55H27m0xB17;25H0xB b: Installation without X11 0xB18;25H0xB c: Minimal installation 0xB19;25H0xB d: Custom installation 0xB20;25H0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjB16;26H39;49md 37m44m a: Full installation19;26H>7md: Custom installation19;26H27m39;49m2;20rHH20;1H4S1;24rHH19;26HH C37m44mThe following is the list of2;48H that will be used.9;25H39;49m37m44mK10;25H39;49m37m44mK11;25H39;49m37m44mK12;25H39;49m37m44mK13;25H39;49m37m44mK14;25H39;49m37m44mK15;25H39;49m37m44mK16;25H39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK4;2H39;49mCCC37m44mDistribution set4;30HSelected ------------------------ -------- 39;49m37m44ma: Kernel (GENERIC)6;33HYes b: Kernel (GENERIC_SCSI3)7;34HNo c: Kernel (GENERIC_SUN4U)8;34HNo d: Kernel (GENERIC.MP)9;34HNo e: Kernel Modules10;33HYes f: Base11;33HYes g: System (/etc)12;33HYes h: Compiler Tools13;34HNo i: Games14;34HNo j: Online Manual Pages15;34HNo k: Miscellaneous16;34HNo l: Test programs17;34HNo m: Text Processing Tools18;34HNo n: X11 sets19;33HNone o: Source and debug sets None 27m39;49mhall selected sets k l n 27m39;49m37m44m:h:oCompileroTools NYes;1H27m x: Install selected sets13;1H39;49m13;33H37m44m7mYes 27m39;49m37m44m3k:4Miscellaneous No Yes 27m39;49m37m44m3l:4TestYprograms No Yes 27m39;49m39;49m11;21H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB12;21H0xB a: X11 base and clients12;55HNo 0xB13;21H0xB b: X11 programming13;55HNo 0xB14;21H0xB c: X11 configuration14;55HNo 0xB15;21H0xB d: X11 fonts 15;55HNo 0xB16;21H0xB e: X11 servers16;55HNo 0xB17;21H0xB f: Select all the above sets17;59H0xB18;21H0xB g: Deselect all the above sets 0xB19;21H0xB>7mx: Install selected sets19;59H27m0xB20;21H0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjB19;22H39;49mx x A39;49m37m44m7n:4X11 sets Yes39;49m37m44mNone21H Yes39;49m37m44mK13;21H Yes39;49m37m44mK14;21H No39;49m37m44mK15;21Hges No15;55H39;49m37m44mK16;21H Yes39;49m37m44mK17;21H Yes 39;49m37m44mK18;21HTools No39;49m37m44mK19;21H7m None27m39;49m37m44mK20;21H sets None39;49m37m44mK 27m39;49mHall selected sets C37m44mNetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. 39;49m37m44mK You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. 39;49m37m44mK You will then be given the opportunity to change any of the disklabel fields. 39;49m37m44mK The NetBSD part of your disk is 768 Megabytes. A full installation requires at least 260 Megabytes without X and at least 295 Megabytes if the X sets are included. 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK13;2H39;49m39;49m13;22H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB14;22H0xB Choose your installation14;58H0xB15;22H0xB15;58H0xB16;22H0xB>7ma: Set sizes of NetBSD partitionsC27m0xB17;22H0xB b: Use existing partition sizes 0xB18;22H0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjB16;23H39;49ma 39;49mH C37m44mYou can now change the sizes for the system partitions. The default is to allocate all the space to the root file system, however you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories).39;49m37m44mK 39;49m37m44mK Free space will be added to the partition marked with a '+'. 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK13;22H39;49m37m44mK14;22H39;49m37m44mK15;22H39;49m37m44mK16;22H39;49m37m44mK17;22H39;49m37m44mK18;22H39;49m37m44mK8;2H39;49m9;9H37m44mMB9;20HCylinders Sectors Filesystem 39;49mCC37m44m>7m 228 (640) 228 466944 + /11;8H27m12811;26H128 262144 swap12;10H012;28H012;38H0 /tmp (mfs)13;10H013;28H013;38H0 /usr14;10H014;28H014;38H0 /var15;10H015;28H015;38H0 /home Add a user defined partition Change input units (sectors/cylinders/MB) Accept partition sizes. Free space 412 MB, 5 free partitions.10;4H39;49mBBBBBBBB 37m44m 228 (640) 228 466944 + / CCC27m39;49m37m44m 128 128 262144128swap262144 swap CCC27m39;49m37m44m 0 0 0 0/tmp (mfs0 /tmp (mfs) CCC27m39;49m37m44m 0 0 0 0/usr 0 /usr CCC27m39;49m37m44m 0 0 0 0/var 0 /var CCC27m39;49m37m44m 0 0 0 0/home 0 /home CCC27m39;49m37m44meAddea useridefined partition CCC27m39;49m37m44m Change(inputrunitsi(sectors/cylinders/MB) CCC27m39;49mHpartition sizes. Free space 412 MB, 5 free partitions. C37m44mWe now have your BSD-disklabel partitions as:39;49m37m44mK This is your last chance to change them.39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK9;9H39;49m37m44mK10;8H39;49m37m44mK11;8H39;49m37m44mK12;10H39;49m37m44mK13;10H39;49m37m44mK14;10H39;49m37m44mK15;10H39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK5;2H39;49mCCC37m44mStart MB End MB Size MB FS type Newfs Mount Mount point C37m44ma:--39;49m 06;21H6396;31H640 FFSv1 Yes Yes / b:7;11H6407;21H7677;31H128 swap c:8;13H08;21H7678;31H768 Whole disk d:9;13H09;23H09;33H0 unused e: Show all unused partitions f: Change input units (sectors/cylinders/MB) 27m39;49mtition sizes ok H C37m44mPlease enter a name for your NetBSD disk39;49m37m44mK 39;49m37m44mK5;5H39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK2;42H39;49mC37m44m[QEMU HARDDISK ]: 39;49m H2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49m C37m44mOk, we are now ready to install NetBSD on your hard disk (sd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? 39;49m11;32H37m44m0lqqqqqqqqqqqqqqqkB12;32H0xB yes or no? 0xB13;32H0xB13;48H0xB14;32H0xB>7ma: No14;48H27m0xB15;32H0xB b: Yes15;48H0xB16;32H0mqqqqqqqqqqqqqqqjB14;33H39;49mb 37m44m a: No15;33H>7mb: Yes15;33H27m39;49mH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49mCCCCC37m44mStatus: 7mRunning2;5H27mCommand: 7mdisklabel -w -r -f /tmp/disktab sd0 'QEMU HARDDISK ' 27m--------------------------------------------------------------------------------4;1H39;49m 39;49m1;14H37m44m7mFinished27m39;49mH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49mH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49mCCCCC37m44mStatus: 7mRunning2;5H27mCommand: 7m/sbin/newfs -V2 -O 1 -b 8192 -f 1024 /dev/rsd0a 27m--------------------------------------------------------------------------------4;1H39;49m 39;49m37m44m/dev/rsd0a: 640.0MB (1310720 sectors) block size 8192, fragment size 1024 39;49m37m44musing 15 cylinder groups of 42.67MB, 5462 blks, 10624 inodes. 39;49m37m44m.....39;49m37m44m.....39;49m37m44m.....39;49mcould not extract estimated entropy from pool Frame pointer is at 0xf344ec80 Call traceback: pc = 0xf00afb04 args = (0xf00, 0x5, 0x0, 0x0, 0xf344eda8, 0xffffffd3) fp = 0xf344ecf0 pc = 0xf011f7b8 args = (0x104, 0x0, 0xf01dcdb8, 0xf344ee70, 0x48007e4, 0x4800fe4) fp = 0xf344ed60 pc = 0xf011f7e4 args = (0xf01dcdb8, 0xf344ee70, 0x0, 0x0, 0x3b, 0xf344ee14) fp = 0xf344edc0 pc = 0xf009a5cc args = (0xf01dcdb8, 0xf0309106, 0x10, 0x1, 0x0, 0x23) fp = 0xf344ee28 pc = 0xf009f650 args = (0x0, 0xf0484540, 0x0, 0x0, 0xf01dff78, 0xf0209000) fp = 0xf344ee90 pc = 0xf009f6e8 args = (0xf3447080, 0x0, 0x0, 0x0, 0xffffffff, 0xf0002820) fp = 0xf344eef0 pc = 0xf0009f34 args = (0xf3447080, 0xf0484540, 0x0, 0x0, 0x44017e1, 0x8000) fp = 0xf344ef50 pc = 0x0 args = (0x0, 0x0, 0x0, 0x0, 0x0, 0x0) fp = 0x0 dump to dev 5,1 not possible rebooting rebooting () HJConfiguration device id QEMU version 1 machine id 32 CPUs: 1 x FMI,MB86904 UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.0 built on Jul 20 2011 21:16 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 65536 bytes entry point is 0x4000 bootpath: /iommu/sbus/espdma/esp/sd@2,0:d Jumping to entry point 00004000 for type 00000005... switching to new context: Traceback (most recent call last): File "/usr/pkg/bin/anita", line 106, in status = main() File "/usr/pkg/bin/anita", line 88, in main a.install() File "/usr/pkg/lib/python2.6/site-packages/anita.py", line 1115, in install self._install() File "/usr/pkg/lib/python2.6/site-packages/anita.py", line 992, in _install 3600) File "/usr/pkg/lib/python2.6/site-packages/pexpect.py", line 1311, in expect return self.expect_list(compiled_pattern_list, timeout, searchwindowsize) File "/usr/pkg/lib/python2.6/site-packages/pexpect.py", line 1325, in expect_list return self.expect_loop(searcher_re(pattern_list), timeout, searchwindowsize) File "/usr/pkg/lib/python2.6/site-packages/pexpect.py", line 1409, in expect_loop raise TIMEOUT (str(e) + '\n' + str(self)) pexpect.TIMEOUT: Timeout exceeded in read_nonblocking(). version: 2.3 ($Revision: 399 $) command: /usr/pkg/bin/qemu-system-sparc args: ['/usr/pkg/bin/qemu-system-sparc', '-m', '64', '-drive', 'file=/bracket/sparc/test/2013.06.13.11.25.18/anita/wd0.img,index=0,media=disk,snapshot=off', '-nographic', '-cdrom', '/bracket/sparc/test/2013.06.13.11.25.18/anita/download/sparc/NetBSD-6.99.21-sparc.iso', '-boot', 'd'] searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)") buffer (last 100 chars): sp/sd@2,0:d Jumping to entry point 00004000 for type 00000005... switching to new context: before (last 100 chars): sp/sd@2,0:d Jumping to entry point 00004000 for type 00000005... switching to new context: after: match: None match_index: None exitstatus: None flag_eof: False pid: 11319 child_fd: 7 closed: False timeout: 300 delimiter: logfile: ', mode 'w' at 0x7f7ffd12c150> logfile_read: None logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 1.0 delayafterterminate: 1.0 3754.27 real 0.37 user 2.10 sys