HJConfiguration device id QEMU version 1 machine id 32 CPUs: 1 x FMI,MB86904 UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.0 built on Jul 20 2011 21:16 Type 'help' for detailed information Trying disk... Not a bootable ELF image Loading a.out image... Loaded 65536 bytes entry point is 0x4000 bootpath: /iommu/sbus/espdma/esp/sd@0,0 Jumping to entry point 00004000 for type 00000005... switching to new context: >> NetBSD/sparc Secondary Boot, Revision 1.15 (Tue Mar 4 08:57:45 UTC 2014) Booting netbsd 4514944+147296-[268368+257718]=0x4f3050 OBP version 3, revision 2.25 (plugin rev 2) Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.33 (GENERIC) #0: Tue Mar 4 09:13:14 UTC 2014 bracket@babylon5.NetBSD.org:/tmp/bracket/build/2014.03.04.06.15.33-sparc/obj/sys/arch/sparc/compile/GENERIC total memory = 49152 KB avail memory = 42964 KB bootpath: /iommu0/sbus0/espdma0/esp0/sd@0,0 mainbus0 (root): SUNW,SPARCstation-5: hostid 80000000 cpu0 at mainbus0: MB86907 @ 170 MHz, L64804 FPU cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled obio0 at mainbus0 clock0 at obio0 slot 0 offset 0x200000: mk48t08 timer0 at obio0 slot 0 offset 0xd00000: delay constant 58, frequency = 1000000 Hz timer: limit 0 shift 10 mask 1fffff zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 zstty0 at zs0 channel 0 (console i/o) zstty1 at zs0 channel 1 zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6 zstty4 at zs1 channel 0 zstty5 at zs1 channel 1 fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached auxreg0 at obio0 slot 0 offset 0x900000 power0 at obio0 slot 0 offset 0x910000 level 2 slavioconfig at obio0 slot 0 offset 0x800000 not configured iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB sbus0 at iommu0: clock = 21.250 MHz genfb0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) genfb0: 1024 x 768 at 8 bit genfb0: framebuffer at offset 0x0 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.33 (GENERIC) #0: Tue Mar 4 09:13:14 UTC 2014 bracket@babylon5.NetBSD.org:/tmp/bracket/build/2014.03.04.06.15.33-sparc/obj/sys/arch/sparc/compile/GENERIC total memory = 49152 KB avail memory = 42964 KB timecounter: Timecounters tick every 10.000 msec bootpath: /iommu0/sbus0/espdma0/esp0/sd@0,0 mainbus0 (root): SUNW,SPARCstation-5: hostid 80000000 cpu0 at mainbus0: MB86907 @ 170 MHz, L64804 FPU cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled obio0 at mainbus0 clock0 at obio0 slot 0 offset 0x200000: mk48t08 timer0 at obio0 slot 0 offset 0xd00000: delay constant 58, frequency = 1000000 Hz timer: limit 0 shift 10 mask 1fffff timecounter: Timecounter "timer-counter" frequency 1000000 Hz quality 100 zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 zstty0 at zs0 channel 0 (console i/o) zstty1 at zs0 channel 1 zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6 zstty4 at zs1 channel 0 zstty5 at zs1 channel 1 fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached auxreg0 at obio0 slot 0 offset 0x900000 power0 at obio0 slot 0 offset 0x910000 level 2 slavioconfig at obio0 slot 0 offset 0x800000 not configured iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB sbus0 at iommu0: clock = 21.250 MHz genfb0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) genfb0: 1024 x 768 at 8 bit genfb0: framebuffer at offset 0x0 genfb0: framebuffer at 0xfe025000, size 1024x768, depth 8, stride 1024 wsdisplay1 at genfb0 kbdmux 1 dma0 at sbus0 slot 5 offset 0x8400000: DMA rev 2 esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7 scsibus0 at esp0: 8 targets, 8 luns per target ledma0 at sbus0 slot 5 offset 0x8400010: DMA rev 2 le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 52:54:00:12:34:56 le0: 8 receive buffers, 2 transmit buffers audiocs0 at sbus0 slot 4 offset 0xc000000 level 5 (ipl 9): CS4231A audio0 at audiocs0: full duplex, playback, capture power-management at sbus0 slot 4 offset 0xa000000 not configured scsibus0: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: disk fixed sd0: fabricating a geometry sd0: 768 MB, 768 cyl, 64 head, 32 sec, 512 bytes/sect x 1572864 sectors sd0(esp0:0:0:0): esp0: timed out [ecb 0xf06c4f88 (flags 0x1, dleft 0, stat 0)], sd0(esp0:0:0:0): esp0: timed out [ecb 0xf06c4f88 (flags 0x41, dleft 0, stat 0)], AGAIN sd0: async, 8-bit transfers sd1 at scsibus0 target 1 lun 0: disk fixed sd1: fabricating a geometry sd1: 100 MB, 100 cyl, 64 head, 32 sec, 512 bytes/sect x 204800 sectors sd1(esp0:0:1:0): esp0: timed out [ecb 0xf06c4f88 (flags 0x1, dleft 0, stat 0)], sd1(esp0:0:1:0): esp0: timed out [ecb 0xf06c4f88 (flags 0x41, dleft 0, stat 0)], AGAIN sd1: async, 8-bit transfers cd0 at scsibus0 target 2 lun 0: cdrom removable cd0(esp0:0:2:0): esp0: timed out [ecb 0xf06c4f88 (flags 0x1, dleft 0, stat 0)], cd0(esp0:0:2:0): esp0: timed out [ecb 0xf06c4f88 (flags 0x41, dleft 0, stat 0)], AGAIN cd0: async, 8-bit transfers sd0: fabricating a geometry sd1: fabricating a geometry sd1: no disk label root on sd0a dumps on sd0b root file system type: ffs Tue Mar 4 09:33:24 UTC 2014 Starting root file system check: /dev/rsd0a: file system is clean; not checking swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: random_seed: /var/db/entropy-file: Not present Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for DAD completion for statically configured addresses... Building databases: dev, utmp, utmpx, services. Starting syslogd. Mounting all filesystems... Clearing temporary files. Creating a.out runtime link editor directory cache. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Mar 4 09:33:39 postfix[319]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Tue Mar 4 09:33:40 UTC 2014 NetBSD/sparc (Amnesiac) (console) login: NetBSD/sparc (Amnesiac) (console) login: root root Mar 4 09:33:43 login: ROOT LOGIN (root) on tty console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.33 (GENERIC) #0: Tue Mar 4 09:13:14 UTC 2014 Welcome to NetBSD! This system is running a development snapshot of the NetBSD operating system, also known as NetBSD-current. It is very possible that it has serious bugs, regressions, broken features or other problems. Please bear this in mind and use the system with care. You are encouraged to test this version as thoroughly as possible. Should you encounter any problem, please report it back to the development team using the send-pr(1) utility (requires a working MTA). If yours is not properly set up, use the web interface at: http://www.NetBSD.org/support/send-pr.html Thank you for helping us test and improve NetBSD. Terminal type is wsvt25. We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh exec /bin/sh # PS1='anita-root-sh''ell-prompt-1# ' PS1='anita-root-sh''ell-prompt-1# ' anita-root-shell-prompt-1# grep -q 'MKKYUA.*=.*yes' /etc/release grep -q 'MKKYUA.*=.*yes' /etc/release anita-root-shell-prompt-1# echo $? echo $? 1 anita-root-shell-prompt-1# exec /bin/sh exec /bin/sh # PS1='anita-root-sh''ell-prompt-2# ' PS1='anita-root-sh''ell-prompt-2# ' anita-root-shell-prompt-2# df -k | sed 's/^/df-pre-test /'; mkdir /tmp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee /tmp/tests/test.tps | atf-report -o ticker:- -o xml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` -lt 90000 && test `/tmp/tests/test.status; } | tee /tmp/tests/test.tps | atf-report -o ticker:- -o xml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` -lt 90000 && test `