This is anita version 1.38
qemu-system-sparc -m \
    64 \
    -drive \
    file=/bracket/sparc/test/2015.06.29.15.39.40/anita/wd0.img,media=disk,snapshot=on \
    -nographic \
    -drive \
    file=/bracket/sparc/test/2015.06.29.15.39.40/anita/tests-results.img,media=disk,snapshot=off
HJConfiguration device id QEMU version 1 machine id 32
CPUs: 1 x FMI,MB86904
UUID: 00000000-0000-0000-0000-000000000000
Welcome to OpenBIOS v1.0 built on Jul 20 2011 21:16
  Type 'help' for detailed information
Trying disk...
Not a bootable ELF image
Loading a.out image...
Loaded 65536 bytes
entry point is 0x4000
bootpath: /iommu/sbus/espdma/esp/sd@0,0

Jumping to entry point 00004000 for type 00000005...
switching to new context:
>> NetBSD/sparc Secondary Boot, Revision 1.15 (Sat Jul	4 00:14:06 UTC 2015)
Booting netbsd
4561984+144920\[274928+266286]=0x501a4c
OBP version 3, revision 2.25 (plugin rev 2)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.	 All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.19 (GENERIC) #0: Sat Jul  4 00:30:20 UTC 2015
	root@babylon5.NetBSD.org:/tmp/bracket/build/2015.06.29.15.39.40-sparc/obj/sys/arch/sparc/compile/GENERIC
total memory = 49152 KB
avail memory = 42912 KB
bootpath: /iommu0/sbus0/espdma0/esp0/sd@0,0
mainbus0 (root): SUNW,SPARCstation-5: hostid 80000000
cpu0 at mainbus0: MB86907 @ 170 MHz, L64804 FPU
cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x200000: mk48t08
timer0 at obio0 slot 0 offset 0xd00000: delay constant 77, frequency = 1000000 Hz
timer: limit 0 shift 10 mask 1fffff
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
zstty4 at zs1 channel 0
zstty5 at zs1 channel 1
fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached
auxreg0 at obio0 slot 0 offset 0x900000
power0 at obio0 slot 0 offset 0x910000 level 2
slavioconfig at obio0 slot 0 offset 0x800000 not configured
iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB
sbus0 at iommu0: clock = 21.250 MHz
tcx0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) (8-bit only TCX)
tcx0: SUNW,tcx, 1024 x 768

tcx0: STIP register too small (0x1)
dma0 at sbus0 slot 5 offset 0x8400000: DMA rev 2
esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
ledma0 at sbus0 slot 5 offset 0x8400010: DMA rev 2
le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 52:54:00:12:34:56
le0: 8 receive buffers, 2 transmit buffers
audiocs0 at sbus0 slot 4 offset 0xc000000 level 5 (ipl 9): CS4231A
audio0 at audiocs0: full duplex, playback, capture
power-management at sbus0 slot 4 offset 0xa000000 not configured
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.15> disk fixed
sd0: fabricating a geometry
sd0: 1024 MB, 1024 cyl, 64 head, 32 sec, 512 bytes/sect x 2097152 sectors
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf06aef88 (flags 0x1, dleft 0, stat 0)], <state 2, nexus 0xf06aef88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd0(esp0:0:0:0): esp0: timed out [ecb 0xf06aef88 (flags 0x41, dleft 0, stat 0)], <state 2, nexus 0xf06aef88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) > AGAIN
sd0: async, 8-bit transfers
sd1 at scsibus0 target 1 lun 0: <QEMU, QEMU HARDDISK, 0.15> disk fixed
sd1: fabricating a geometry
sd1: 100 MB, 100 cyl, 64 head, 32 sec, 512 bytes/sect x 204800 sectors
sd1(esp0:0:1:0): esp0: timed out [ecb 0xf06aef88 (flags 0x1, dleft 0, stat 0)], <state 2, nexus 0xf06aef88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
sd1(esp0:0:1:0): esp0: timed out [ecb 0xf06aef88 (flags 0x41, dleft 0, stat 0)], <state 2, nexus 0xf06aef88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) > AGAIN
sd1: async, 8-bit transfers
cd0 at scsibus0 target 2 lun 0: <QEMU, QEMU CD-ROM, 0.15> cdrom removable
cd0(esp0:0:2:0): esp0: timed out [ecb 0xf06aef88 (flags 0x1, dleft 0, stat 0)], <state 2, nexus 0xf06aef88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) >
cd0(esp0:0:2:0): esp0: timed out [ecb 0xf06aef88 (flags 0x41, dleft 0, stat 0)], <state 2, nexus 0xf06aef88, phase(l 7, c 100, p 3), resid 0, msg(q 0,o 0) > AGAIN
cd0: async, 8-bit transfers
sd0: fabricating a geometry
cpu0: data fault: pc=0xf0336eec addr=0x0 sfsr=0x126<PERR=0x0,LVL=0x1,AT=0x1,FT=0x1,FAV,OW>
panic: kernel fault
Stopped in pid 0.1 (system) at	netbsd:cpu_Debugger+0x4:	or		%
o7, %g0, %g1
db> Traceback (most recent call last):
  File "/usr/pkg/bin/anita", line 137, in <module>
    status = main()
  File "/usr/pkg/bin/anita", line 127, in main
    status = a.run_tests(timeout = options.test_timeout)
  File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1461, in run_tests
    child = self.boot(scratch_disk_args)
  File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1419, in boot
    child.expect("login:")
  File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 85, in expect
    r = pexpect.spawn.expect(self, pattern, *args, **kwargs)
  File "/usr/pkg/lib/python2.7/site-packages/pexpect/__init__.py", line 1410, in expect
    timeout, searchwindowsize)
  File "/usr/pkg/lib/python2.7/site-packages/pexpect/__init__.py", line 1425, in expect_list
    timeout, searchwindowsize)
  File "/usr/pkg/lib/python2.7/site-packages/pexpect/__init__.py", line 1527, in expect_loop
    raise TIMEOUT(str(err) + '\n' + str(self))
pexpect.TIMEOUT: Timeout exceeded.
<anita.pexpect_spawn_log object at 0x7f7ff5f91350>
version: 3.0
command: /usr/pkg/bin/qemu-system-sparc
args: ['/usr/pkg/bin/qemu-system-sparc', '-m', '64', '-drive', 'file=/bracket/sparc/test/2015.06.29.15.39.40/anita/wd0.img,media=disk,snapshot=on', '-nographic', '-drive', 'file=/bracket/sparc/test/2015.06.29.15.39.40/anita/tests-results.img,media=disk,snapshot=off']
searcher: <pexpect.searcher_re object at 0x7f7ff5b0d310>
buffer (last 100 chars): 'pped in pid 0.1 (system) at  netbsd:cpu_Debugger+0x4:	       or	       %\r\r\no7, %g0, %g1\r\r\ndb> '
before (last 100 chars): 'pped in pid 0.1 (system) at  netbsd:cpu_Debugger+0x4:	       or	       %\r\r\no7, %g0, %g1\r\r\ndb> '
after: <class 'pexpect.TIMEOUT'>
match: None
match_index: None
exitstatus: None
flag_eof: False
pid: 18362
child_fd: 8
closed: False
timeout: 300
delimiter: <class 'pexpect.EOF'>
logfile: None
logfile_read: <anita.multifile object at 0x7f7ff5f91690>
logfile_send: <anita.multifile object at 0x7f7ff5b0d2d0>
maxread: 2000
ignorecase: False
searchwindowsize: None
delaybeforesend: 0.05
delayafterclose: 5.0
delayafterterminate: 5.0
      309.74 real	289.90 user	    0.77 sys