This is anita version 1.40 qemu-system-sparc -m \ 64 \ -drive \ file=/bracket/sparc/test/2017.03.06.13.14.25/anita/wd0.img,format=raw,media=disk,snapshot=on \ -nographic \ -drive \ file=/bracket/sparc/test/2017.03.06.13.14.25/anita/tests-results.img,format=raw,media=disk,snapshot=off Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.1 built on Nov 24 2016 21:22 Type 'help' for detailed information Trying disk:a... Not a bootable ELF image Loading a.out image... Loaded 65536 bytes entry point is 0x4000 bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0:a switching to new context: >> NetBSD/sparc Secondary Boot, Revision 1.15 (Tue Mar 7 10:40:29 UTC 2017) Booting netbsd 4780940main-loop: WARNING: I/O thread spun for 1000 iterations +143780|[283984+266871]=0x539290 OBP version 3, revision 2.25 (plugin rev 2) Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.65 (GENERIC) #0: Tue Mar 7 11:00:49 UTC 2017 root@babylon5.netbsd.org:/tmp/bracket/build/2017.03.06.13.14.25-sparc/obj/sys/arch/sparc/compile/GENERIC total memory = 49024 KB avail memory = 42564 KB bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000/sd@0,0 mainbus0 (root): SUNW,SPARCstation-5: hostid 80123456 cpu0 at mainbus0: MB86904 @ 170 MHz, MB86910 or WTL1164/5 FPU cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled obio0 at mainbus0 clock0 at obio0 slot 0 offset 0x200000: mk48t08 timer0 at obio0 slot 0 offset 0xd00000: delay constant 1, frequency = 2000000 Hz timer: limit 0 shift 9 mask 3fffff zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 zstty0 at zs0 channel 0 (console i/o) zstty1 at zs0 channel 1 zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6 zstty4 at zs1 channel 0 kbd0 at zstty4 zstty5 at zs1 channel 1 ms0 at zstty5 wsmouse0 at ms0 mux 0 fdc0 at obio0 slot 0 offset 0x400000 level 11 softpri 4: chip 82077 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec auxreg0 at obio0 slot 0 offset 0x900000 power0 at obio0 slot 0 offset 0x910000 level 2 slavioconfig at obio0 slot 0 offset 0x800000 not configured iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB sbus0 at iommu0: clock = 21.250 MHz dma0 at sbus0 slot 5 offset 0x8400000: DMA rev 2 esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7 scsibus0 at esp0: 8 targets, 8 luns per target ledma0 at sbus0 slot 5 offset 0x8400010: DMA rev 2 le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 52:54:00:12:34:56 le0: 8 receive buffers, 2 transmit buffers tcx0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) (8-bit only TCX) tcx0: SUNW,tcx, 1024 x 768 tcx0: id 0, rev 0, sense 0 tcx0: attached to /dev/fb0 wsdisplay1 at tcx0 kbdmux 1 audiocs0 at sbus0 slot 4 offset 0xc000000 level 5 (ipl 9): CS4231A audio0 at audiocs0: full duplex, playback, capture audiocs0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000 power-management at sbus0 slot 4 offset 0xa000000 not configured scsibus0: waiting 2 seconds for devices to settle... wskbd0 at kbd0 mux 1 sd0 at scsibus0 target 0 lun 0: disk fixed sd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors sd1 at scsibus0 target 1 lun 0: disk fixed sd1: 100 MB, 203 cyl, 16 head, 63 sec, 512 bytes/sect x 204800 sectors cd0 at scsibus0 target 2 lun 0: cdrom removable kbd0: reset failed root on sd0a dumps on sd0b root file system type: ffs kern.module.path=/stand/sparc/7.99.65/modules Tue Mar 7 11:18:08 UTC 2017 Starting root file system check: /dev/rsd0a: file system is clean; not checking swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: Loaded entropy from /var/db/entropy-file. Setting tty flags. Setting sysctl variables: ddb.onpanic: 1 -> 0 Starting network. /etc/rc: WARNING: $hostname not set. IPv6 mode: host Configuring network interfaces:. Adding interface aliases:. Waiting for DAD to complete for statically configured addresses... Building databases: dev, utmp, utmpx, services. Starting syslogd. Mounting all file systems... Clearing temporary files. Creating a.out runtime link editor directory cache. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. /usr/sbin/postconf: warning: valid_hostname: empty hostname /usr/sbin/postconf: fatal: unable to use my own hostname Mar 7 11:18:22 postfix[370]: fatal: unable to use my own hostname /etc/rc.d/postfix exited with code 1 Starting inetd. Starting cron. The following components reported failures: /etc/rc.d/postfix See /var/run/rc.log for more information. Tue Mar 7 11:18:23 UTC 2017 NetBSD/sparc (Amnesiac) (console) login: NetBSD/sparc (Amnesiac) (console) login: root root Mar 7 11:18:26 login: ROOT LOGIN (root) on tty console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.65 (GENERIC) #0: Tue Mar 7 11:00:49 UTC 2017 Welcome to NetBSD! This system is running a development snapshot of the NetBSD operating system, also known as NetBSD-current. It is very possible that it has serious bugs, regressions, broken features or other problems. Please bear this in mind and use the system with care. You are encouraged to test this version as thoroughly as possible. Should you encounter any problem, please report it back to the development team using the send-pr(1) utility (requires a working MTA). If yours is not properly set up, use the web interface at: http://www.NetBSD.org/support/send-pr.html Thank you for helping us test and improve NetBSD. We recommend that you create a non-root account and use su(1) for root access. # exec /bin/sh exec /bin/sh # PS1='anita-root-shell-pr''ompt-1488885521.59# ' PS1='anita-root-shell-pr''ompt-1488885521.59# ' anita-root-shell-prompt-1488885521.59# grep -q 'MKKYUA.*=.*yes' /etc/release grep -q 'MKKYUA.*=.*yes' /etc/release anita-root-shell-prompt-1488885521.59# echo exit_status=$?= echo exit_status=$?= exit_status=1= anita-root-shell-prompt-1488885521.59# exec /bin/sh exec /bin/sh # PS1='anita-root-shell-pr''ompt-1488885522.24# ' PS1='anita-root-shell-pr''ompt-1488885522.24# ' anita-root-shell-prompt-1488885522.24# df -k | sed 's/^/df-pre-test /'; mkdir /tmp/tests && cd /usr/tests && { atf-run; echo $? >/tmp/tests/test.status; } | tee /tmp/tests/test.tps | atf-report -o ticker:- -o xml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` -lt 90000 && test `/tmp/tests/test.status; } | tee /tmp/tests/test.tps | atf-report -o ticker:- -o xml:/tmp/tests/test.xml; (cd /tmp && for f in /usr/share/xsl/atf/tests-results.xsl /usr/share/xml/atf/tests-results.dtd /usr/share/examples/atf/tests-results.css; do cp $f tests/; done;); { cd /tmp && test `du -sk tests | awk '{print $1}'` -lt 90000 && test `