This is anita version 1.49 Using pexpect version 4.6.0 /usr/pkg/bin/anita \ --workdir=/bracket/sparc64/test/2020.01.15.09.21.21/anita \ --structured-log-file=/bracket/sparc64/test/2020.01.15.09.21.21/install.slog \ --vmm-args= \ --test-timeout \ 400000 \ install \ file:///bracket/sparc64/test/2020.01.15.09.21.21/release/images/NetBSD-9.99.37-sparc64.iso Downloading file:///bracket/sparc64/test/2020.01.15.09.21.21/release/images/NetBSD-9.99.37-sparc64.iso... OK Creating hard disk image...QEMU emulator version 4.1.0 Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers done. not reversing virtio devices qemu-system-sparc64 \ -m \ 128 \ -drive \ file=/bracket/sparc64/test/2020.01.15.09.21.21/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -cdrom \ /bracket/sparc64/test/2020.01.15.09.21.21/anita/download/sparc64/NetBSD-9.99.37-sparc64.iso \ -boot \ d child pid is 17104 OpenBIOS for Sparc64 Configuration device id QEMU version 1 machine id 0 kernel cmdline CPUs: 1 x SUNW,UltraSPARC-IIi UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.1 built on Jul 1 2019 17:08 Type 'help' for detailed information Trying cdrom:f... Not a bootable ELF image Not a bootable a.out image Loading FCode image... Loaded 7514 bytes entry point is 0x4000 Evaluating FCode... NetBSD IEEE 1275 Multi-FS Bootblock Version $NetBSD: bootblk.fth,v 1.15 2015/08/20 05:40:08 dholland Exp $ ..>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.20 (Wed Jan 15 12:06:36 UTC 2020) =0xa4ac90 Loading netbsd: 10792016+509912+324264 [724896+476254]=0xdf1740 Unimplemented service set-symbol-lookup ([2] -- [0]) [ 1.0000000] pool redzone disabled for 'kmem-8192' [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 9.99.37 (GENERIC) #0: Wed Jan 15 13:12:30 UTC 2020 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2020.01.15.09.21.21-sparc64/obj/sys/arch/sparc64/compile/GENERIC [ 1.0000000] total memory = 128 MB [ 1.0000000] avail memory = 107 MB [ 1.0000000] pool redzone disabled for 'buf64k' [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000000] mainbus0 (root): OpenBiosTeam,OpenBIOS: hostid 80123456 [ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 100 MHz, CPU id 0 [ 1.0000000] cpu0: manuf 17, impl 12, mask 91 [ 1.0000000] cpu0: 256K instruction (64 b/l), 16K data (32 b/l), 256K external (64 b/l) [ 1.0000000] psycho0 at mainbus0 [ 1.0000000] psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 [ 1.0000000] pci0 at psycho0 [ 1.0000000] ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x11) [ 1.0000000] pci1 at ppb0 bus 1 [ 1.0000000] ebus0 at pci1 dev 1 function 0: Sun Microsystems PCIO Ebus2, revision 0x01 [ 1.0000000] clock0 at ebus0 addr 2000-3fff: mk48t59 [ 1.0000000] power at ebus0 addr 7240-7243 ipl 1 not configured [ 1.0000000] fdthree at ebus0 addr 0-ffffffff not configured [ 1.0000000] com0 at ebus0 addr 3f8-3ff ipl 2b: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] pckbc0 at ebus0 addr 60-67 ipl 29: no intr 1: selftest ok [ 1.0000000] pckbd0 at pckbc0 (kbd slot) [ 1.0000000] wskbd1 at pckbd0 mux 1 [ 1.0000000] pms0 at pckbc0 (aux slot) [ 1.0000000] wsmouse0 at pms0 mux 0 [ 1.0000000] hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 0 [ 1.0000000] hme0: interrupting at ivec 3021 [ 1.0000000] hme0: Ethernet address 52:54:00:12:34:56 [ 1.0000000] nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1 [ 1.0000000] nsphy0: 100baseTX-FDX, auto [ 1.0000000] genfb0 at pci1 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) [ 1.0000000] cmdide0 at pci1 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07) [ 1.0000000] cmdide0: primary channel configured to native-PCI mode, channel non-independant [ 1.0000000] cmdide0: using ivec 1820 for native-PCI interrupt [ 1.0000000] atabus0 at cmdide0 channel 0 [ 1.0000000] cmdide0: secondary channel configured to native-PCI mode, channel non-independant [ 1.0000000] atabus1 at cmdide0 channel 1 [ 1.0000000] ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x11) [ 1.0000000] pci2 at ppb1 bus 2 [ 1.0000000] pcons at mainbus0 not configured [ 1.0000030] No counter-timer -- using %tick at 100MHz as system clock. [ 7.5621269] wd0 at atabus0 drive 0 [ 7.6221115] wd0: [ 7.6221115] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 7.6936965] atapibus0 at atabus1: 2 targets [ 7.6936965] cd0 at atapibus0 drive 0: cdrom removable [ 7.7820976] WARNING: 1 error while detecting hardware; check system log. [ 7.8135454] root on cd0a dumps on cd0b [ 7.8705550] root file system type: cd9660 [ 7.8705550] kern.module.path=/stand/sparc64/9.99.37/modules Created tmpfs /dev (802816 byte, 1536 inodes) init: kernel security level changed from 0 to 1 You are using a serial console, we do not know your terminal emulation. Please select one, typical values are: vt100 ansi xterm Terminal type (just hit ENTER for 'vt220'): xterm NetBSD/sparc64 9.99.37 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Installation auf Deutschxx c: Mensajes de instalacion en castellano xx d: Messages d'installation en franXais xx e: Komunikaty instalacyjne w jezyku polskim xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-9.99.37 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx Yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqj You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 1536M. A full installation requires at least 1263M without X and at least 1563M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do?xxxx>a: Set sizes of NetBSD partitionsxx b: Use default partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Size (sec)Filesystem----------------------------------- - -------------------- >a: 745472 (3145728) + / b: 0 c: 0/tmp (tmpfs) d: 0/usr e: 0/var----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 2400256 sec. a: 745472 (3145728) + / >b: 0 b: 0 >c: 0 /tmp (tmpfs) c: 0 /tmp (tmpfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 2400256 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs. Total size: 1536M, free: 224K Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a:0 3145279 3145280 FFSv2 IN / b:0 3145727 3145728 Whole disk ------------ ------------ ------------ -------- ---- ---------------- d: Change input units (sectors/cylinders/MB/GB) e: Edit name of the disk f: Clone external partition(s) g: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Installing boot blocks on wd0.... Status: RunningCommand: /sbin/disklabel -W wd0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /usr/sbin/installboot /dev/rwd0c /usr/mdec/bootblk qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq /dev/rwd0a: 1535.8MB (3145280 sectors) block size 16384, fragment size 2048 using 9 cylinder groups of 170.66MB, 10922 blks, 21184 inodes. ...............................................................................Finished Installing boot blocks on wd0.... Status: RunningCommand: /sbin/disklabel -W wd0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /usr/sbin/installboot /dev/rwd0c /usr/mdec/bootblk qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Installing /ofwboot on /targetroot.... Status: RunningCommand: /bin/cp -p /usr/mdec/ofwboot /targetroot qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel (GENERIC.UP)No c: Kernel modulesYes d: BaseYes e: Configuration files (/etc) Yes f: Compiler toolsNo g: GamesNo h: Manual pagesNo i: MiscellaneousNo j: Recovery toolsNo k: Test programsNo l: Text processing toolsNo m: X11 setsNone n: Source and debug setsNone >x: Install selected sets>f: Compiler tools No x: Install selected setsYes f: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >k: Test programs NoYes k: Test programs Yes >m: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 servers No xx f: Select all the above setsxx g: Deselect all the above setsxx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes No Yestools No None sets None sets m: X11 sets None >n: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcNo xx d: GNU sources No xx e: X11 sources No xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above setsxx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Y No Yestools No None sets None sets n: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVDxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directory xx h: Skip setxx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj Status: RunningCommand: progress -zf /sparc64/binary/sets/kern-GENERIC.tar.xz tar --chroot -xhepf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA11% |***1660 KiB 966.7300:12 ETA3% |****905 KiB 845.884 ETA8**2602 KiB 692.916 ETA20*8117.458 ETA23190 KiB 547.149 ETA3*3551.129**409625.088 ETA3024517.865**50131.147 ETA618608.2541**87406 ETA3*6122 KiB 498.765 ETA7*71389.894 ETA9*9646.2053*74779.573 ETA5*7426.0160**845369.351 ETA608.617**953177.2509 ETA525.4275***1064585.27 ETA6934.256 ETA84***18743.784 ETA90**27597.712 ETA4* | 13318 KiB 5011 ETA8** | 13861570 ETA100*| 140500.48 Finished Status: RunningCommand: progress -zf /sparc64/binary/sets/modules.tar.xz tar --chroot -xhepf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA12% |****1167 KiB 476.0100:17 ETA6*62882.956 ETA21**20663.545*4946.905 ETA31**30174.04 ETA4*3861.143 ETA9**87058.382 ETA45**437166.241 ETA50**91974.010 ETA7**552181.8508 ETA62**60599.497 ETA8**65394.336 ETA73**71577.815 ETA80***759 KiB 501.953 ETA4*82080.502 ETA92***99210.211 ETA6* | 93211.670 ETA100**| 968004.05 Finished Status: RunningCommand: progress -zf /sparc64/binary/sets/base.tar.xz tar --chroot -xhepf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA1149 KiB 607.0805:21 ETA263 KiB 597.835 ETA121249.2453 ETA2850.721 ETA32061.5549 ETA33738.857 ETA2401119.676:09 ETA2624.8312 ETA50097.4809 ETA42321.995 ETA3% |*60844.512 ETA4581.653 ETA704116.576 ETA3985.885 ETA4824226.945:56 ETA5794.017 ETA92052.66581.75102382.445 ETA6261.72123819.385215.538 ETA6% |**21090.326:00 ETA34209.2030115.881 ETA3237.170 ETA741578.155:58 ETA2617530512.902 ETA46884865559.9345 ETA75121.34 ETA9% |***78528.7537 ETA818931.194 ETA932240.227 ETA106953.564 ETA2087352.5817 ETA11743.955 ETA12146.892 ETA5339.900 ETA2% |****36767.7703 ETA415970.531 ETA50223.174:58 ETA4211.71361759.785:03 ETA710062.50 ETA45523.974:58 ETA83834.916 ETA715665*95986.733 ETA9404530689182 ETA1107.070 ETA67422.742 ETA8651.81269401 ETA30882.8149 ETA7504282.1536 ETA8*5934.834 ETA6325373 ETA6943.4997435721 ETA8704085092.30 ETA9704829 ETA20*969318 ETA400791.83780047 ETA11450.616 ETA120332.134 ETA3841.902385590.9917 ETA[ 181.3036153] panic: pool_redzone_check: [buf1k] 0x00 != 0x66 [ 181.3036153] cpu0: Begin traceback... [ 181.3036153] cpu0: End traceback... Stopped in pid 0.45 (system) at netbsd:cpu_Debugger+0x4: nop db{0}> Traceback (most recent call last): File "/usr/pkg/bin/anita", line 144, in status = main() File "/usr/pkg/bin/anita", line 125, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1893, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1148, in _install self._install_using_sysinst() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1613, in _install_using_sysinst 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 181, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 119, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 82, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-sparc64 args: ['/usr/pkg/bin/qemu-system-sparc64', '-m', '128', '-drive', 'file=/bracket/sparc64/test/2020.01.15.09.21.21/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-cdrom', '/bracket/sparc64/test/2020.01.15.09.21.21/anita/download/sparc64/NetBSD-9.99.37-sparc64.iso', '-boot', 'd'] buffer (last 100 chars): 'u0: End traceback...\r\r\nStopped in pid 0.45 (system) at netbsd:cpu_Debugger+0x4: nop\r\r\ndb{0}> ' before (last 100 chars): 'u0: End traceback...\r\r\nStopped in pid 0.45 (system) at netbsd:cpu_Debugger+0x4: nop\r\r\ndb{0}> ' after: match: None match_index: None exitstatus: None flag_eof: False pid: 17104 child_fd: 12 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(Select medium|Install from)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)|(a partitioning scheme)|(b: Use the entire disk)|(Your disk currently has a non-NetBSD partition)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode)|(Please enter a name for your NetBSD disk)|(ready to install NetBSD on your hard disk)|(We now have your (BSD.|GPT.)?(disklabel )?partitions)") 10952.42 real 4.35 user 9.23 sys