This is anita version 2.11 Using pexpect version 4.8.0 /usr/pkg/bin/anita \ --workdir=/bracket/alpha/test/2024.04.02.12.42.35/anita \ --structured-log-file=/bracket/alpha/test/2024.04.02.12.42.35/install.slog \ --vmm-args= \ --memory-size 64M \ install \ file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/ Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/instkernel/netbsd.gz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/modules.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/base.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/etc.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/comp.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/gpufw.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/misc.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/rescue.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/tests.tgz... OK Downloading file:///bracket/alpha/test/2024.04.02.12.42.35/release/release/alpha/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ /bracket/alpha/test/2024.04.02.12.42.35/anita/install_tmp.iso \ /bracket/alpha/test/2024.04.02.12.42.35/anita/download Creating hard disk image... done. QEMU emulator version 6.0.0 Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-alpha qemu package: qemu-6.0.0nb2 glib2 package: glib2-2.64.1 qemu-system-alpha \ -m 64 \ -drive file=/bracket/alpha/test/2024.04.02.12.42.35/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive file=/bracket/alpha/test/2024.04.02.12.42.35/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -kernel /bracket/alpha/test/2024.04.02.12.42.35/anita/netbsd_install \ -append root=/dev/wd0a child pid is 1684 PCI: 0:1:0 class 0300 id 1013:00b8 PCI: region 0 (BAR 10): 10000000 PCI: region 1 (BAR 14): 12000000 PCI: 0:2:0 class 0200 id 8086:100e PCI: region 0 (BAR 10): 12020000 PCI: region 1 (BAR 14): 0000c000 PCI: intr pin 1 -> irq 12 PCI: 0:3:0 class 0101 id 1095:0646 PCI: region 0 (BAR 10): 0000c040 PCI: region 1 (BAR 14): 0000c048 PCI: region 2 (BAR 18): 0000c050 PCI: region 3 (BAR 1c): 0000c058 PCI: region 4 (BAR 20): 0000c060 PCI: intr pin 1 -> irq 16 PCI: 0:7:0 class 0601 id 8086:0484 CTB: PRINTERPORT[ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.10 (INSTALL) #0: Tue Apr 2 13:53:38 UTC 2024 [ 1.0000000] root@babylon5.netbsd.org:/tmp/build/2024.04.02.12.42.35-alpha/obj/sys/arch/alpha/compile/INSTALL [ 1.0000000] AlphaServer ES40 ("Clipper"), 250MHz, s/n QEMU [ 1.0000000] 8192 byte page size, 1 processor. [ 1.0000000] total memory = 65536 KB [ 1.0000000] (120 KB reserved for PROM, 65416 KB used by NetBSD) [ 1.0000000] avail memory = 52952 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264A-0 (EV67) [ 1.0000000] cpu0: Architecture extensions: 0x1307 [ 1.0000000] qemu0 at mainbus0: Qemu virtual machine services [ 1.0000030] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0 [ 1.0000030] tsc0: 2 Dchips, 1 memory bus of 16 bytes [ 1.0000030] tsc0: arrays present: 0MB, 0MB, 0MB, 0MB, Dchip 0 rev 0 [ 1.0000030] tsp0 at tsc0 [ 1.0000030] pci0 at tsp0 bus 0 [ 1.0000030] vga0 at pci0 dev 1 function 0: vendor 1013 product 00b8 (rev. 0x00) [ 1.0000030] wsdisplay0 at vga0 (kbdmux ignored) [ 1.0000030] drm at vga0 not configured [ 1.0000030] wm0 at pci0 dev 2 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0000030] wm0: interrupting at dec 6600 irq 12 [ 1.0000030] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0000030] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0000030] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000030] cmdide0 at pci0 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07) [ 1.0000030] cmdide0: primary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: using dec 6600 irq 16 for native-PCI interrupt [ 1.0000030] atabus0 at cmdide0 channel 0 [ 1.0000030] cmdide0: secondary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: secondary channel ignored (disabled) [ 1.0000030] sio0 at pci0 dev 7 function 0: vendor 8086 product 0484 (rev. 0x03) [ 1.0000030] isa0 at sio0 [ 1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.0000030] com0: console [ 1.0000030] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO [ 1.0000030] pckbc0 at isa0 port 0x60-0x64 [ 1.0000030] pckbd0 at pckbc0 (kbd slot) [ 1.0000030] pckbc0: using irq 1 for kbd slot [ 1.0000030] wskbd0 at pckbd0 (mux ignored) [ 1.0000030] pms0 at pckbc0 (aux slot) [ 1.0000030] pckbc0: using irq 12 for aux slot [ 1.0000030] wsmouse0 at pms0 (mux ignored) [ 1.0000030] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0000030] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.0000030] tsciic at tsc0 [ 1.0000030] not configured [ 1.0000030] Using the Qemu CPU alarm for 50 Hz hardclock. [ 1.0000030] atapibus0 at atabus0: 2 targets [ 1.8701146] cd0 at atapibus0 drive 1: cdrom removable [ 1.8701146] wd0 at atabus0 drive 0 [ 1.8701146] wd0: [ 1.8701146] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 1.9120809] WARNING: system needs entropy for security; see entropy(7) [ 3.1790339] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 3.7162512] fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec [ 3.7162512] root on md0a dumps on md0b [ 3.7162512] root file system type: ffs [ 3.7162512] kern.module.path=/stand/alpha/10.99.10/modules Terminal type? [vt100] xterm Erase set to backspace. erase ^?, werase ^W, kill ^U, intr ^C NetBSD/alpha 10.99.10 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in English xx b: Messages d'installation en franXais xx c: Installation auf Deutsch xx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-10.99.10 Install System xx xx>a: Install NetBSD to hard disk xx b: Upgrade NetBSD on a hard disk xx c: Re-install sets or install additional sets xx d: Reboot the computer xx e: Utility menu xx f: Config menu xx x: Exit Install System xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xx xx>a: wd0 (1.5G, QEMU HARDDISK) xx b: Extended partitioning xx x: Exit xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 1536M. A full installation requires at least 1156M without X and at least 1456M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do? xx xx>a: Set sizes of NetBSD partitions xx b: Use default partition sizes xx c: Manually define partitions xx x: Cancel xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1007616 (2883584) + / b: 262144 c: 0 /tmp (mfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1875968 sec. a: 1007616 (2883584) + / >b: 262144 b: 262144 >c: 0 /tmp (mfs) c: 0 /tmp (mfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1875968 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs. Total size: 1536M, free: 0B Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a: 0 2883583 2883584 FFS IN / b: 2883584 3145727 262144 swap c: 0 3145727 3145728 Whole disk ------------ ------------ ------------ -------- ---- ---------------- e: Change input units (sectors/cylinders/MB/GB) f: Edit name of the disk g: Clone external partition(s) h: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Status: RunningCommand: /sbin/newfs -V2 -O 1 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq /dev/rwd0a: 1408.0MB (2883584 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 8989607068696576.00MB, 11264 blks, 22272 inodes. .....................................................................[ 10.67656.......... Finished Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot /dev/rwd0c /usr/mdec/bootxx_ffs qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xx xx>a: Full installation xx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Miscellaneous No j: Recovery tools No k: Test programs No l: Text processing tools No m: X11 sets None n: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >j: Recovery tools NoYes j: Recovery tools Yes >k: Test programs NoYes k: Test programs Yes >m: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programming No xx c: X11 configuration No xx d: X11 fonts No xx e: X11 servers No xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No firmware Yes No Yes Yes Yes tools No None sets None sets m: X11 sets None >n: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sources No xx b: Base sources No xx c: Share sources No xx d: GNU sources No xx e: X11 sources No xx f: Debug symbols No xx g: X11 debug symbols No xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No firmware Yes No Y Yes Yes tools No None sets None sets n: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 9, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install from xx xx>a: CD-ROM / DVD xx b: HTTP xx c: FTP xx d: NFS xx e: Floppy xx f: Unmounted fs xx g: Local directory xx h: Skip set xx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA99% |********************************** | 14352 KiB 9.30 M00:00 ETA100*| 1446019 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/modules.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA83% |*****************************13808 KiB 9.16 M00:00 ETA100******| 1663008 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/base.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA5% |*11464 KiB 8.20 M00:22 ETA9% |***8227.7912% |****25432536*3312041 ETA20**41584670 ETA4*92005919 ETA9**5835277 ETA33*667186 ETA7*7460865 ETA42**84272974 ETA6**9237683 ETA50* 99 MiB 8.101 ETA5**10740 ETA9*12009 ETA64**2668 ETA9**3547 ETA72*4286 ETA5*87.7780**5734 ETA3*6307*713 ETA91*922 ETA5**8711 ETA9* | 195500 ETA100*41 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/etc.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4990 KiB 5.78 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/comp.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA212720 KiB 9.23 M00:48 ETA3% |*71286.801:05 ETA5252247.330:59 ETA6% |**33136666 ETA9% |***436328.121 ETA11548084748 ETA3% |****6256354932195*753847.889 ETA781136708*6632550 ETA20*965206148 ETA1 101 M76 ETA4*175 ETA6*2292 ETA8338.160 ETA30*42738 ETA3*537 ETA5*62435 ETA7754 ETA8*973 ETA40*90532 ETA3*20600 ETA51529 ETA7*998 ETA9*28716 ETA5137693*465 ETA5*553 ETA66288*73711 ETA60*8130 ETA292419 ETA4*30058 ETA6*727 ETA81616 ETA70*25645 ETA13163*44 ETA4703 ETA6*55582 ETA8*62601 ETA80*7310 ETA282209 ETA4*9148 ETA6*4067 ETA75546 ETA8103790*8295 ETA21114094 ETA2*6087.88307631652513424315203 ETA086.9874 ETA764923 ETA5*4065443352542 ETA690751161 ETA3098*4255.9688073666075449830 ETA9937602229100*| 4638 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/gpufw.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 6144730.700:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/misc.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA59% |********************8760 KiB 6.42 M00:00 ETA93************ | 1372803100***| 1469014 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/rescue.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 11250 KiB 8.12 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/tests.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA10% |***7856 KiB 5.36 M00:12 ETA9% |******146406.409 ETA32*****247927.546 ETA41***316000752****9664344 ETA60***45552037***5324083 ETA8***8966.952 ETA86***65024831 ETA93** | 70720700 ETA7* | 7340833100**| 7537006 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: RunningCommand: /bin/sh MAKEDEV all qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /usr/sbin/certctl rehash qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The extraction of the selected sets for NetBSD-10.99.10 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continue xmqqqqqqqqqqqqqqqqqqqqqqqj The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Changing local password for root. New password: Password unchanged. passwd: /etc/master.passwd: unchanged This system seems to lack a cryptographically strong pseudo random number generator. There is not enough entropy available to create secure keys (e.g. ssh host keys). If you plan to use this installation for production work and will for example have ssh host keys generated, we strongly advise to complete the entropy setup now! You may use random data generated on another computer and load it here, or you could enter random characters manually. If you have a USB random number device, connect it now and select the "Re-test" option. >a: Manually input random characters b: Import a NetBSD entropy file c: Load raw binary random data d: Re-test x: Not now, continue! Enter one line of random characters. They should contain at last 256 bits of randomness, as in 256 coin tosses, 100 throws of a 6-sided die, 64 random hexadecimal digits, or (if you are able to copy & paste output from another machine into this installer) the output from running the following command on another machine whose randomness you trust:***************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************** [ 197.2290294] entropy: ready Traceback (most recent call last): File "/usr/pkg/bin/anita", line 163, in status = main() File "/usr/pkg/bin/anita", line 136, in main a.install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2411, in install self._install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 1521, in _install self._install_using_sysinst() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2088, in _install_using_sysinst 10800) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 255, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 344, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 372, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-alpha args: ['/usr/pkg/bin/qemu-system-alpha', '-m', '64', '-drive', 'file=/bracket/alpha/test/2024.04.02.12.42.35/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/alpha/test/2024.04.02.12.42.35/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-kernel', '/bracket/alpha/test/2024.04.02.12.42.35/anita/netbsd_install', '-append', 'root=/dev/wd0a'] buffer (last 100 chars): b' \r\x1b[A \x1b[39;49m[ 197.2290294] entropy: ready\r\r\n' before (last 100 chars): b' \r\x1b[A \x1b[39;49m[ 197.2290294] entropy: ready\r\r\n' after: match: None match_index: None exitstatus: None flag_eof: False pid: 1684 child_fd: 9 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b'(?!)') 1: re.compile(b'a: Progress bar') 2: re.compile(b'Select medium|Install from') 3: re.compile(b'Enter the CDROM device') 4: re.compile(b'unused-group-should-not-match') 5: re.compile(b'Hit enter to continue') 6: re.compile(b'b: Use serial port com0') 7: re.compile(b'Please choose the timezone') 8: re.compile(b'essential things') 9: re.compile(b'Configure the additional items') 10: re.compile(b'Multiple CDs found') 11: re.compile(b'The following are the http site') 12: re.compile(b'Is the network information you entered accurate') 13: re.compile(b'I have found the following network interface') 14: re.compile(b'Which network device would you like to use') 15: re.compile(b'No allows you to continue anyway') 16: re.compile(b"Can't connect to") 17: re.compile(b'/sbin/newfs') 18: re.compile(b'Do you want to install the NetBSD bootcode') 19: re.compile(b'Do you want to update the bootcode in the Master Boot Record to the latest') 20: re.compile(b'([a-z]): Custom installation') 21: re.compile(b'(?!)') 22: re.compile(b'a: This is the correct geometry') 23: re.compile(b'a: Use one of these disks') 24: re.compile(b'([a-z]): Set sizes of NetBSD partitions') 25: re.compile(b'(?!)') 26: re.compile(b'a partitioning scheme') 27: re.compile(b'([a-z]): Use the entire disk') 28: re.compile(b'(?!)') 29: re.compile(b'Do you want to install the NetBSD bootcode') 30: re.compile(b'Do you want to update the bootcode') 31: re.compile(b'Please enter a name for your NetBSD disk') 32: re.compile(b'ready to install NetBSD on your hard disk') 33: re.compile(b'We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions') 34: re.compile(b'Your disk currently has a non-NetBSD partition') 35: re.compile(b'Sysinst could not automatically determine the BIOS geometry of the disk') 36: re.compile(b'Do you want to re-edit the disklabel partitions') 37: re.compile(b'Command: ') 38: re.compile(b'not enough entropy') 39: re.compile(b'Changing local password for root') 11246.10 real 248.19 user 327.54 sys