/usr/pkg/bin/anita:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html __import__('pkg_resources').run_script('anita==2.13', 'anita') This is anita version 2.13 Using pexpect version 4.9.0 /usr/pkg/bin/anita \ --workdir=/bracket/alpha/test/2024.07.28.14.45.51/anita \ --structured-log-file=/bracket/alpha/test/2024.07.28.14.45.51/install.slog \ --vmm-args= \ --memory-size 64M \ install \ file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/ Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/instkernel/netbsd.gz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/modules.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/base.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/base32.tgz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/base32.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/etc.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/comp.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/gpufw.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/misc.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/rescue.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/tests.tgz... OK Downloading file:///bracket/alpha/test/2024.07.28.14.45.51/release/release/alpha/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ /bracket/alpha/test/2024.07.28.14.45.51/anita/install_tmp.iso \ /bracket/alpha/test/2024.07.28.14.45.51/anita/download Creating hard disk image... done. QEMU emulator version 8.2.2 Copyright (c) 2003-2023 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-alpha qemu package: qemu-8.2.2 glib2 package: glib2-2.78.4 qemu-system-alpha \ -m 64 \ -drive file=/bracket/alpha/test/2024.07.28.14.45.51/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive file=/bracket/alpha/test/2024.07.28.14.45.51/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -kernel /bracket/alpha/test/2024.07.28.14.45.51/anita/netbsd_install \ -append root=/dev/wd0a child pid is 2034 PCI: 0:1:0 class 0300 id 1013:00b8 PCI: region 0 (BAR 10): 10000000 PCI: region 1 (BAR 14): 12000000 PCI: 0:2:0 class 0200 id 8086:100e PCI: region 0 (BAR 10): 12020000 PCI: region 1 (BAR 14): 0000c000 PCI: intr pin 1 -> irq 12 PCI: 0:3:0 class 0101 id 1095:0646 PCI: region 0 (BAR 10): 0000c040 PCI: region 1 (BAR 14): 0000c048 PCI: region 2 (BAR 18): 0000c050 PCI: region 3 (BAR 1c): 0000c058 PCI: region 4 (BAR 20): 0000c060 PCI: intr pin 1 -> irq 16 PCI: 0:7:0 class 0601 id 8086:0484 CTB: PRINTERPORT[ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.11 (INSTALL) #0: Sun Jul 28 21:40:39 UTC 2024 [ 1.0000000] root@babylon5.netbsd.org:/tmp/build/2024.07.28.14.45.51-alpha/obj/sys/arch/alpha/compile/INSTALL [ 1.0000000] AlphaServer ES40 ("Clipper"), 250MHz, s/n QEMU [ 1.0000000] 8192 byte page size, 1 processor. [ 1.0000000] total memory = 65536 KB [ 1.0000000] (120 KB reserved for PROM, 65416 KB used by NetBSD) [ 1.0000000] avail memory = 52944 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264A-0 (EV67) [ 1.0000000] cpu0: Architecture extensions: 0x1307 [ 1.0000000] qemu0 at mainbus0: Qemu virtual machine services [ 1.0000030] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0 [ 1.0000030] tsc0: 2 Dchips, 1 memory bus of 16 bytes [ 1.0000030] tsc0: arrays present: 0MB, 0MB, 0MB, 0MB, Dchip 0 rev 0 [ 1.0000030] tsp0 at tsc0 [ 1.0000030] pci0 at tsp0 bus 0 [ 1.0000030] vga0 at pci0 dev 1 function 0: vendor 1013 product 00b8 (rev. 0x00) [ 1.0000030] wsdisplay0 at vga0 (kbdmux ignored) [ 1.0000030] drm at vga0 not configured [ 1.0000030] wm0 at pci0 dev 2 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0000030] wm0: interrupting at dec 6600 irq 12 [ 1.0000030] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0000030] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0000030] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000030] cmdide0 at pci0 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07) [ 1.0000030] cmdide0: primary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: using dec 6600 irq 16 for native-PCI interrupt [ 1.0000030] atabus0 at cmdide0 channel 0 [ 1.0000030] cmdide0: secondary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: secondary channel ignored (disabled) [ 1.0000030] sio0 at pci0 dev 7 function 0: vendor 8086 product 0484 (rev. 0x03) [ 1.0000030] isa0 at sio0 [ 1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.0000030] com0: console [ 1.0000030] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO [ 1.0000030] pckbc0 at isa0 port 0x60-0x64 [ 1.0000030] pckbd0 at pckbc0 (kbd slot) [ 1.0000030] pckbc0: using irq 1 for kbd slot [ 1.0000030] wskbd0 at pckbd0 (mux ignored) [ 1.0000030] pms0 at pckbc0 (aux slot) [ 1.0000030] pckbc0: using irq 12 for aux slot [ 1.0000030] wsmouse0 at pms0 (mux ignored) [ 1.0000030] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0000030] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.0000030] tsciic at tsc0 [ 1.0000030] not configured [ 1.0000030] Using the Qemu CPU alarm for 50 Hz hardclock. [ 1.0000030] atapibus0 at atabus0: 2 targets [ 1.0000030] cd0 at atapibus0 drive 1: cdrom removable [ 1.0000030] wd0 at atabus0 drive 0 [ 1.0000030] wd0: [ 1.0000030] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 1.4337495] WARNING: system needs entropy for security; see entropy(7) [ 1.8332412] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 2.2336415] fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec [ 2.2336415] root on md0a dumps on md0b [ 2.2336415] root file system type: ffs [ 2.2336415] kern.module.path=/stand/alpha/10.99.11/modules Terminal type? [vt100] xterm Erase set to backspace. erase ^?, werase ^W, kill ^U, intr ^C NetBSD/alpha 10.99.11 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in English xx b: Installation auf Deutsch xx c: Mensajes de instalacion en castellano xx d: Messages d'installation en franXais xx e: Komunikaty instalacyjne w jezyku polskim xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-10.99.11 Install System xx xx>a: Install NetBSD to hard disk xx b: Upgrade NetBSD on a hard disk xx c: Re-install sets or install additional sets xx d: Reboot the computer xx e: Utility menu xx f: Config menu xx x: Exit Install System xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xx xx>a: wd0 (1.5G, QEMU HARDDISK) xx b: Extended partitioning xx x: Exit xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 1536M. A full installation requires at least 1156M without X and at least 1456M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do? xx xx>a: Set sizes of NetBSD partitions xx b: Use default partition sizes xx c: Manually define partitions xx x: Cancel xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1007616 (2883584) + / b: 262144 c: 0 /tmp (mfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 1875968 sec. a: 1007616 (2883584) + / >b: 262144 b: 262144 >c: 0 /tmp (mfs) c: 0 /tmp (mfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 1875968 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs. Total size: 1536M, free: 0B Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a: 0 2883583 2883584 FFS IN / b: 2883584 3145727 262144 swap c: 0 3145727 3145728 Whole disk ------------ ------------ ------------ -------- ---- ---------------- e: Change input units (sectors/cylinders/MB/GB) f: Edit name of the disk g: Clone external partition(s) h: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Status: RunningCommand: /sbin/newfs -V2 -O 1 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq /dev/rwd0a: 1408.0MB (2883584 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 8989607068696576.00MB, 11264 blks, 22272 inodes. .....................................................................[ 7.04381.......... Finished Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot /dev/rwd0c /usr/mdec/bootxx_ffs qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xx xx>a: Full installation xx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ---------------------------------- -------- a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Manual pages (HTML) No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets >e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >j: Miscellaneous NoYes j: Miscellaneous Yes >k: Recovery tools NoYes k: Recovery tools Yes >l: Test programs NoYes l: Test programs Yes >n: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programming No xx c: X11 configuration No xx d: X11 fonts No xx e: X11 servers No xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No firmware Yes No ML) No Yes Yes Yes tools No None sets None n: X11 sets None >o: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sources No xx b: Base sources No xx c: Share sources No xx d: GNU sources No xx e: X11 sources No xx f: Debug symbols No xx g: X11 debug symbols No xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No firmware Yes No ML) No Yes Yes Yes tools No None sets None sets o: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 9, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install from xx xx>a: CD-ROM / DVD xx b: HTTP xx c: FTP xx d: NFS xx e: Floppy xx f: Unmounted fs xx g: Local directory xx h: Skip set xx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA94% |******************************** | 13592 KiB 9.49 M00:00 ETA100***| 1445027 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/modules.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA68% |***********************11432 KiB 7.61 M00:00 ETA100************| 1672029 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/base.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA5% |*11328 KiB 8.27 M00:22 ETA9% |***86567.9613% |****26800821 ETA7*34288790 ETA21**42152719 ETA4*894458*565768 ETA32**642547 ETA5*71208456 ETA9*84465 ETA43**88080584 ETA7*9547293 ETA51* 100 M82 ETA5**8621 ETA9*1750 ETA63**25709 ETA7*3258 ETA71*947 ETA3*43456 ETA6*9369*54255 ETA82*6034 ETA5*803 ETA9**7412 ETA93*8201 ETA6*920 ETA9* | 19515100*08 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/etc.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4990 KiB 5.32 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/comp.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA211144 KiB 8.01 M01:01 ETA3% |*77767.643 ETA526698.020:59 ETA7% |**3665266 ETA84529424 ETA10% |***5520061 ETA2% |****6488890 ETA37137631 ETA5*8440206825447.853 ETA79056624 ETA8*92312355 ETA9 99 M433 ETA21*10792 ETA3*1650 ETA4246449 ETA6*377 ETA84875 ETA30*5074 ETA19833 ETA3*68902 ETA5*7730 ETA786939 ETA9*958.037 ETA40*20486 ETA213135 ETA4*253 ETA6*307842 ETA9*4611 ETA505300 ETA2*62129 ETA4708 ETA5*947 ETA7895 ETA9*98214 ETA61*3063 ETA3*1542 ETA42331 ETA6*3260 ETA8433018 ETA70*547 ETA2*6276 ETA47065 ETA5*874 ETA7873 ETA9*9692 ETA81*40421 ETA3*1309 ETA42306*3128 ETA74017 ETA9*86 ETA9055355 ETA18262*6014 ETA20547.936847738629547043 ETA1322131035*76.97922 ETA683877618751 ETA9678* | 49102514533629420 ETA145099065.9580100*| 50088 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/gpufw.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 61441.00 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/misc.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA53% |******************7824 KiB 5.93 M00:01 ETA90************* | 1335270 ETA10****| 1469067 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/rescue.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA81% |****************************9184 KiB 6.67 M00:00 ETA100*******| 1123096 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/tests.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA9% |***7232 KiB 4.93 M00:13 ETA14% |****10688484 ETA2****8765.6509 ETA33***25818 ETA40***31000677 ETA7**60485453**40984476 ETA61***7128535 ETA70***538063 ETA8***958402 ETA82*62904490***94281 ETA4* | 72128250 ETA6* | 73832029* | 756964.8100*| 7631074 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: RunningCommand: /bin/sh MAKEDEV all qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /usr/sbin/certctl rehash qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The extraction of the selected sets for NetBSD-10.99.11 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continue xmqqqqqqqqqqqqqqqqqqqqqqqj The root password of the newly installed system has not yet been initialized. If you do not want to set a password, enter an empty line. Traceback (most recent call last): File "/usr/pkg/bin/anita", line 4, in __import__('pkg_resources').run_script('anita==2.13', 'anita') File "/usr/pkg/lib/python3.11/site-packages/pkg_resources/__init__.py", line 722, in run_script self.require(requires)[0].run_script(script_name, ns) File "/usr/pkg/lib/python3.11/site-packages/pkg_resources/__init__.py", line 1572, in run_script exec(script_code, namespace, namespace) File "/usr/pkg/lib/python3.11/site-packages/anita-2.13-py3.11.egg/EGG-INFO/scripts/anita", line 163, in File "/usr/pkg/lib/python3.11/site-packages/anita-2.13-py3.11.egg/EGG-INFO/scripts/anita", line 136, in main File "/usr/pkg/lib/python3.11/site-packages/anita-2.13-py3.11.egg/anita.py", line 2419, in install raise ^^^^^^ File "/usr/pkg/lib/python3.11/site-packages/anita-2.13-py3.11.egg/anita.py", line 1528, in _install print("Decompressing image...", end=' ') ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.11/site-packages/anita-2.13-py3.11.egg/anita.py", line 2014, in _install_using_sysinst r"Enter the CDROM device", File "/usr/pkg/lib/python3.11/site-packages/anita-2.13-py3.11.egg/anita.py", line 255, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.11/site-packages/pexpect/spawnbase.py", line 354, in expect return self.expect_list(compiled_pattern_list, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.11/site-packages/pexpect/spawnbase.py", line 383, in expect_list return exp.expect_loop(timeout) ^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.11/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) ^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.11/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-alpha args: ['/usr/pkg/bin/qemu-system-alpha', '-m', '64', '-drive', 'file=/bracket/alpha/test/2024.07.28.14.45.51/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/alpha/test/2024.07.28.14.45.51/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-kernel', '/bracket/alpha/test/2024.07.28.14.45.51/anita/netbsd_install', '-append', 'root=/dev/wd0a'] buffer (last 100 chars): b'een initialized.\r\r\n If you do not want to set a password, enter an empty line.\x1b[39;49m\r\r\n\r\r\n\x1b[39;49m' before (last 100 chars): b'een initialized.\r\r\n If you do not want to set a password, enter an empty line.\x1b[39;49m\r\r\n\r\r\n\x1b[39;49m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 2034 child_fd: 9 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b'(?!)') 1: re.compile(b'a: Progress bar') 2: re.compile(b'Select medium|Install from') 3: re.compile(b'Enter the CDROM device') 4: re.compile(b'unused-group-should-not-match') 5: re.compile(b'Hit enter to continue') 6: re.compile(b'b: Use serial port com0') 7: re.compile(b'Please choose the timezone') 8: re.compile(b'essential things') 9: re.compile(b'Configure the additional items') 10: re.compile(b'Multiple CDs found') 11: re.compile(b'The following are the http site') 12: re.compile(b'Is the network information you entered accurate') 13: re.compile(b'I have found the following network interface') 14: re.compile(b'Which network device would you like to use') 15: re.compile(b'No allows you to continue anyway') 16: re.compile(b"Can't connect to") 17: re.compile(b'/sbin/newfs') 18: re.compile(b'Do you want to install the NetBSD bootcode') 19: re.compile(b'Do you want to update the bootcode in the Master Boot Record to the latest') 20: re.compile(b'([a-z]): Custom installation') 21: re.compile(b'(?!)') 22: re.compile(b'a: This is the correct geometry') 23: re.compile(b'a: Use one of these disks') 24: re.compile(b'([a-z]): Set sizes of NetBSD partitions') 25: re.compile(b'(?!)') 26: re.compile(b'a partitioning scheme') 27: re.compile(b'([a-z]): Use the entire disk') 28: re.compile(b'(?!)') 29: re.compile(b'Do you want to install the NetBSD bootcode') 30: re.compile(b'Do you want to update the bootcode') 31: re.compile(b'Please enter a name for your NetBSD disk') 32: re.compile(b'ready to install NetBSD on your hard disk') 33: re.compile(b'We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions') 34: re.compile(b'Your disk currently has a non-NetBSD partition') 35: re.compile(b'Sysinst could not automatically determine the BIOS geometry of the disk') 36: re.compile(b'Do you want to re-edit the disklabel partitions') 37: re.compile(b'Command: ') 38: re.compile(b'not enough entropy') 39: re.compile(b'Changing local password for root') 11040.92 real 205.28 user 132.70 sys