This is anita version 2.18 Using pexpect version 4.9.0 /usr/pkg/bin/anita \ --workdir=/bracket/alpha/test/2026.08.26.13.28.37/anita \ --structured-log-file=/bracket/alpha/test/2026.08.26.13.28.37/install.slog \ --vmm-args= \ --memory-size 64M \ install \ file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/ Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/instkernel/netbsd.gz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/modules.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/base.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/base32.tgz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/base32.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/etc.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/comp.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/gpufw.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/gpufw.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/misc.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/rescue.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/tests.tgz... OK Downloading file:///bracket/alpha/test/2026.08.26.13.28.37/release/release/alpha/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ /bracket/alpha/test/2026.08.26.13.28.37/anita/install_tmp.iso \ /bracket/alpha/test/2026.08.26.13.28.37/anita/download Creating hard disk image... done. QEMU emulator version 10.0.2 Copyright (c) 2003-2025 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-alpha qemu package: qemu-10.0.2 glib2 package: glib2-2.84.2 qemu-system-alpha \ -m 64 \ -drive file=/bracket/alpha/test/2026.08.26.13.28.37/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive file=/bracket/alpha/test/2026.08.26.13.28.37/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -kernel /bracket/alpha/test/2026.08.26.13.28.37/anita/netbsd_install \ -append root=/dev/wd0a child pid is 29346 PCI: 0:1:0 class 0300 id 1013:00b8 PCI: region 0 (BAR 10): 10000000 PCI: region 1 (BAR 14): 12000000 PCI: 0:2:0 class 0200 id 8086:100e PCI: region 0 (BAR 10): 12020000 PCI: region 1 (BAR 14): 0000c000 PCI: intr pin 1 -> irq 12 PCI: 0:3:0 class 0101 id 1095:0646 PCI: region 0 (BAR 10): 0000c040 PCI: region 1 (BAR 14): 0000c048 PCI: region 2 (BAR 18): 0000c050 PCI: region 3 (BAR 1c): 0000c058 PCI: region 4 (BAR 20): 0000c060 PCI: intr pin 1 -> irq 16 PCI: 0:7:0 class 0601 id 8086:0484 CTB: PRINTERPORT[ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025, 2026 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.99.7 (INSTALL) #0: Wed Aug 26 23:03:12 UTC 2026 [ 1.0000000] root@babylon5.netbsd.org:/tmp/build/2026.08.26.13.28.37-alpha/obj/sys/arch/alpha/compile/INSTALL [ 1.0000000] AlphaServer ES40 ("Clipper"), 250MHz, s/n QEMU [ 1.0000000] 8192 byte page size, 1 processor. [ 1.0000000] total memory = 65536 KB [ 1.0000000] (120 KB reserved for PROM, 65416 KB used by NetBSD) [ 1.0000000] avail memory = 52848 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: ID 0 (primary), 21264A-0 (EV67) [ 1.0000000] cpu0: Architecture extensions: 0x1307 [ 1.0000000] qemu0 at mainbus0: Qemu virtual machine services [ 1.0000030] tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0 [ 1.0000030] tsc0: 2 Dchips, 1 memory bus of 16 bytes [ 1.0000030] tsc0: arrays present: 0MB, 0MB, 0MB, 0MB, Dchip 0 rev 0 [ 1.0000030] tsp0 at tsc0 [ 1.0000030] pci0 at tsp0 bus 0 [ 1.0000030] vga0 at pci0 dev 1 function 0: vendor 1013 product 00b8 (rev. 0x00) [ 1.0000030] wsdisplay0 at vga0 (kbdmux ignored) [ 1.0000030] drm at vga0 not configured [ 1.0000030] wm0 at pci0 dev 2 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0000030] wm0: interrupting at dec 6600 irq 12 [ 1.0000030] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0000030] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0000030] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000030] cmdide0 at pci0 dev 3 function 0: CMD Technology PCI0646 (rev. 0x07) [ 1.0000030] cmdide0: primary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: using dec 6600 irq 16 for native-PCI interrupt [ 1.0000030] atabus0 at cmdide0 channel 0 [ 1.0000030] cmdide0: secondary channel configured to native-PCI mode, channel non-independent [ 1.0000030] cmdide0: secondary channel ignored (disabled) [ 1.0000030] sio0 at pci0 dev 7 function 0: vendor 8086 product 0484 (rev. 0x03) [ 1.0000030] isa0 at sio0 [ 1.0000030] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.0000030] com0: console [ 1.0000030] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO [ 1.0000030] pckbc0 at isa0 port 0x60-0x64 [ 1.0000030] pckbd0 at pckbc0 (kbd slot) [ 1.0000030] pckbc0: using irq 1 for kbd slot [ 1.0000030] wskbd0 at pckbd0 (mux ignored) [ 1.0000030] pms0 at pckbc0 (aux slot) [ 1.0000030] pckbc0: using irq 12 for aux slot [ 1.0000030] wsmouse0 at pms0 (mux ignored) [ 1.0000030] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0000030] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.0000030] tsciic at tsc0 [ 1.0000030] not configured [ 1.0000030] WARNING: system needs entropy for security; see entropy(7) [ 1.0000030] Using the Qemu CPU alarm for 50 Hz hardclock. [ 1.4051342] atapibus0 at atabus0: 2 targets [ 1.4051342] cd0 at atapibus0 drive 1: cdrom removable [ 1.4051342] wd0 at atabus0 drive 0 [ 1.4051342] wd0: [ 1.4051342] wd0: 2048 MB, 4161 cyl, 16 head, 63 sec, 512 bytes/sect x 4194304 sectors [ 1.8441718] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 2.3242134] fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec [ 2.3512402] root on md0a dumps on md0b [ 2.3512402] root file system type: ffs [ 2.3512402] kern.module.path=/stand/alpha/11.99.7/modules Terminal type? [vt100] xterm Erase set to backspace. erase ^?, werase ^W, kill ^U, intr ^C NetBSD/alpha 11.99.7 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in English xx b: Installation auf Deutsch xx c: Mensajes de instalacion en castellano xx d: Messages d'installation en franXais xx e: Komunikaty instalacyjne w jezyku polskim xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from a floppy, you may now remove the disk. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-11.99.7 Install System xx xx>a: Install NetBSD to hard disk xx b: Upgrade NetBSD on a hard disk xx c: Re-install sets or install additional sets xx d: Reboot the computer xx e: Utility menu xx f: Config menu xx x: Exit Install System xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD? The most common disk types are:- wd: SATA, ATA, or IDE- sd: SCSI or removable USB disk- ld: NVMe (e.g. M.2 card), SD/MMC card, or virtual disk lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xx xx>a: wd0 (2.0G, QEMU HARDDISK) xx b: Extended partitioning (software RAID, etc...) xx x: Exit xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can use a simple editor to set the sizes of the NetBSD partitions, or apply the default partition sizes and contents. You will then be given the opportunity to change any of the partition details. The NetBSD (or free) part of your disk (wd0) is 2048M. A full installation requires at least 1156M without X and at least 1456M if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx What would you like to do? xx xx>a: Set sizes of NetBSD partitions xx b: Use default partition sizes xx c: Manually define partitions xx x: Cancel xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. Size (sec) Filesystem ----------------------------------- - -------------------- >a: 1138688 (3932160) + / b: 262144 c: 0 /tmp (mfs) d: 0 /usr e: 0 /var ----------------------------------- - -------------------- g: Add a user defined partition h: Clone external partition(s) i: Change input units (sectors/cylinders/MB/GB) x: Go on. Free space 2793472 sec. a: 1138688 (3932160) + / >b: 262144 b: 262144 >c: 0 /tmp (mfs) c: 0 /tmp (mfs) >d: 0 /usr d: 0 /usr >e: 0 /var e: 0 /var >g: Add a user defined partition g: Add a user defined partition >h: Clone external partition(s) h: Clone external partition(s) >i: Change input units (sectors/cylinders/MB/GB) i: Change input units (sectors/cylinders/MB/GB) >x: Go on. Free space 2793472 sec. We now have your disklabel partitions for wd0 below. This is your last chance to change them. Flags: (I)nstall, (N)ewfs. Total size: 2048M, free: 0B Start (sec) End (sec) Size (sec) FS type Flag Filesystem ------------ ------------ ------------ -------- ---- ---------------- a: 0 3932159 3932160 FFS IN / b: 3932160 4194303 262144 swap c: 0 4194303 4194304 Whole disk ------------ ------------ ------------ -------- ---- ---------------- e: Change input units (sectors/cylinders/MB/GB) f: Edit name of the disk g: Clone external partition(s) h: Cancel >x: Partition sizes ok Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx Yes or no? xx xx>a: No xx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Status: RunningCommand: /sbin/newfs -V2 -O 1 /dev/rwd0a qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq newfs: Cannot open `/etc/fstab': No such file or directory /dev/rwd0a: 1920.0MB (3932160 sectors) block size 16384, fragment size 2048 using 11 cylinder groups of 8989607068696576.00MB, 11171 blks, 22016 inodes. ..................................................[ 7.1780799] entropy: best e............................. Finished Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot /dev/rwd0c /usr/mdec/bootxx_ffs qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xx xx>a: Full installation xx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ---------------------------------- -------- a: Kernel (GENERIC) Yes b: Kernel modules Yes c: Base Yes d: Configuration files (/etc) Yes e: Compiler tools No f: Games No g: Graphics driver firmware Yes h: Manual pages No i: Manual pages (HTML) No j: Miscellaneous No k: Recovery tools No l: Test programs No m: Text processing tools No n: X11 sets None o: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >j: Miscellaneous NoYes j: Miscellaneous Yes >k: Recovery tools NoYes k: Recovery tools Yes >l: Test programs NoYes l: Test programs Yes >n: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programming No xx c: X11 configuration No xx d: X11 fonts No xx e: X11 servers No xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Nofirmware Yes NoML) No Yes Yes Yestools No None sets None n: X11 sets None >o: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sources No xx b: Base sources No xx c: Share sources No xx d: GNU sources No xx e: X11 sources No xx f: Debug symbols No xx g: X11 debug symbols No xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected sets xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Nofirmware Yes NoML) No Yes Yes Yestools No None sets None sets o: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 9, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install from xx xx>a: CD-ROM / DVD xx b: HTTPS xx c: HTTP xx d: FTP xx e: NFS xx f: Floppy xx g: Unmounted fs xx h: Local directory xx i: Skip set xx j: Skip set group xx k: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/kern-GENERIC.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA85% |*****************************12480 KiB 7.53 M00:00 ETA100******| 146162 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/modules.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA64% |**********************10976 KiB 6.70 M00:00 ETA92********** | 1578482100***| 170307 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/base.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA5% |*11056 KiB 7.12 M00:27 ETA7% |**6496.9010% |***23280653% |****961686 ETA7*3704875 ETA20**43912804 ETA3*51248763 ETA6*720012 ETA9*6236154 ETA30468843 ETA3*7166452 ETA6*793661 ETA9*8430 ETA42*914402019 ETA5*6688148 ETA8* 100 M37 ETA50*656 ETA4*13205 ETA7*2183 ETA61**892 ETA3*3357*4070 ETA70*609 ETA3*538 ETA46187*6257 ETA9*60682*726 ETA5*75 ETA7*8324 ETA9*75.973 ETA92*9382 ETA4861 ETA9** | 2076.020 ETA85.91100*| 20988 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/etc.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 5010 KiB 5.01 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/comp.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA210352 KiB 6.97 M01:10 ETA3% |*58567.0408 ETA424688176 ETA6% |**32320225 ETA7906414 ETA9% |***47472302 ETA105509650 ETA2% |****6251223777613472496.882 ETA5*8504693 ETA81800534 ETA6632296 ETA79776107 ETA8*932325.939 ETA9 99 MiB 6.046 ETA21*106134 ETA214202 ETA4*2180 ETA59330:58 ETA6*342584087 ETA9*8355 ETA315594 ETA2*63422 ETA47071 ETA5*8949 ETA6848 ETA8*90507 ETA9826 ETA41*20674 ETA213603 ETA4*2132 ETA5841 ETA7*36839 ETA84378 ETA9*97 ETA505556 ETA2*6275 ETA37094 ETA5*7713 ETA68422 ETA8*921 ETA9730 ETA61*30728 ETA21487 ETA3*206 ETA575 ETA6*35804 ETA8423 ETA9*912 ETA705271821 ETA2*650 ETA472319 ETA5*8047 ETA7866 ETA8*9575 ETA80*40284 ETA1993 ETA3*17802 ETA42411 ETA6*310 ETA77009 ETA84618 ETA9*9767 ETA905215656 ETA1757809432*6136229324145085 ETA0365.93787187596737056043484 ETA5*649268203 ETA5362 ETA7728273901848*1081 ETA25034.96148725784699880 ETA5004100*| 5013 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/gpufw.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 6144481.5700:00 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/misc.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% | | 0 0.00 KiB/s --:-- ETA47% |****************7112 KiB 5.51 M00:01 ETA80************120644.980 ETA10*******| 1492083 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/rescue.tgz tar --chroot -xpf - qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA67% |***********************8496 KiB 5.87 M00:00 ETA100************| 126506.14 Finished Status: RunningCommand: progress -zf /mnt2//alpha/binary/sets/tests.tgz tar --chroot -xpf -qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq 0% || 00.00 KiB/s --:-- ETA7% |**7024 KiB 4.54 M00:17 ETA10% |***90083.6221 ETA6% |*****14764.4016 ETA25***231525.162 ETA32***9680410 ETA9**35504009 ETA42*78084.9410 ETA8**435045.0508 ETA55***9712197 ETA60**54160086 ETA4*77444.9671**645685.084 ETA7**9744103 ETA81**728804.936**74412 ETA91* | 8230401 ETA4* | 8522790 ETA6* | 864485677664429* | 8968828100*| 899705 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: RunningCommand: /bin/sh MAKEDEV all qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Status: RunningCommand: /usr/sbin/certctl rehash qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq Finished Traceback (most recent call last): File "/usr/pkg/bin/anita", line 163, in status = main() ^^^^^^ File "/usr/pkg/bin/anita", line 136, in main a.install() File "/usr/pkg/lib/python3.12/site-packages/anita.py", line 2527, in install self._install() File "/usr/pkg/lib/python3.12/site-packages/anita.py", line 1604, in _install self._install_using_sysinst() File "/usr/pkg/lib/python3.12/site-packages/anita.py", line 2117, in _install_using_sysinst r = child.expect([ ^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/anita.py", line 270, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/pexpect/spawnbase.py", line 354, in expect return self.expect_list(compiled_pattern_list, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/pexpect/spawnbase.py", line 383, in expect_list return exp.expect_loop(timeout) ^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) ^^^^^^^^^^^^^^^ File "/usr/pkg/lib/python3.12/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-alpha args: ['/usr/pkg/bin/qemu-system-alpha', '-m', '64', '-drive', 'file=/bracket/alpha/test/2026.08.26.13.28.37/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/alpha/test/2026.08.26.13.28.37/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-kernel', '/bracket/alpha/test/2026.08.26.13.28.37/anita/netbsd_install', '-append', 'root=/dev/wd0a'] buffer (last 100 chars): b'\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\x1b[H\x1b[39;49m' before (last 100 chars): b'\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\r\r\n\x1b[K\x1b[H\x1b[39;49m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 29346 child_fd: 8 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b'(?!)') 1: re.compile(b'a: Progress bar') 2: re.compile(b'Select medium|Install from') 3: re.compile(b'Enter the CDROM device') 4: re.compile(b'unused-group-should-not-match') 5: re.compile(b'Hit enter to continue') 6: re.compile(b'b: Use serial port com0') 7: re.compile(b'Please choose the timezone') 8: re.compile(b'essential things') 9: re.compile(b'Configure the additional items') 10: re.compile(b'Multiple CDs found') 11: re.compile(b'The following are the http site') 12: re.compile(b'Is the network information you entered accurate') 13: re.compile(b'I have found the following network interface') 14: re.compile(b'Which network device would you like to use') 15: re.compile(b'No allows you to continue anyway') 16: re.compile(b"Can't connect to") 17: re.compile(b'/sbin/newfs') 18: re.compile(b'Do you want to install the NetBSD bootcode') 19: re.compile(b'Do you want to update the bootcode in the Master Boot Record to the latest') 20: re.compile(b'([a-z]): Custom installation') 21: re.compile(b'(?!)') 22: re.compile(b'a: This is the correct geometry') 23: re.compile(b'a: Use one of these disks') 24: re.compile(b'([a-z]): Set sizes of NetBSD partitions') 25: re.compile(b'(?!)') 26: re.compile(b'a partitioning scheme') 27: re.compile(b'([a-z]): Use the entire disk') 28: re.compile(b'(?!)') 29: re.compile(b'Do you want to install the NetBSD bootcode') 30: re.compile(b'Do you want to update the bootcode') 31: re.compile(b'Please enter a name for your NetBSD disk') 32: re.compile(b'ready to install NetBSD on your hard disk') 33: re.compile(b'We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions') 34: re.compile(b'Your disk currently has a non-NetBSD partition') 35: re.compile(b'Sysinst could not automatically determine the BIOS geometry of the disk') 36: re.compile(b'Do you want to re-edit the disklabel partitions') 37: re.compile(b'Command: ') 38: re.compile(b'not enough entropy') 39: re.compile(b'Changing local password for root') 40: re.compile(b'(Accept partition sizes)|(Go on)') 11058.98 real 255.65 user 11.22 sys