This is anita version 1.44 /usr/pkg/bin/anita \ --workdir=/bracket/hpcmips/test/2018.08.29.15.46.31/anita \ --structured-log-file=/bracket/hpcmips/test/2018.08.29.15.46.31/install.slog \ --vmm-args= \ --test-timeout \ 120000 \ --memory-size \ 48M \ install \ file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/ Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/netbsd.gz... OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/sets/modules.tgz... OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/sets/base.tgz... OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/sets/etc.tgz... OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/sets/comp.tgz... OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/sets/misc.tgz... OK Downloading file:///bracket/hpcmips/test/2018.08.29.15.46.31/release/hpcmips/binary/sets/tests.tgz... OK makefs -t cd9660 -o rockridge /bracket/hpcmips/test/2018.08.29.15.46.31/anita/install_tmp.iso /bracket/hpcmips/test/2018.08.29.15.46.31/anita/download Creating hard disk image... done. gxemul -M \ 48M \ -d \ /bracket/hpcmips/test/2018.08.29.15.46.31/anita/wd0.img \ -emobilepro880 \ -d \ /bracket/hpcmips/test/2018.08.29.15.46.31/anita/install_tmp.iso \ /bracket/hpcmips/test/2018.08.29.15.46.31/anita/download/hpcmips/installation/netbsd.gz child pid is 10294 GXemul 0.6.0.1 Copyright (C) 2003-2014 Anders Gavare Read the source code and/or documentation for other Copyright messages. Simple setup... net: simulated network: 10.0.0.0/8 (max outgoing: TCP=100, UDP=100) simulated gateway+nameserver: 10.0.0.254 (60:50:40:30:20:10) simulated nameserver uses real nameserver 140.160.30.203 machine: memory: 48 MB cpu0: VR4121 (I+D = 16+8 KB) machine: NEC MobilePro 880 bootstring: netbsd.gz diskimage: /bracket/hpcmips/test/2018.08.29.15.46.31/anita/wd0.img IDE DISK id 0, read/write, 1536 MB (3145728 sectors) diskimage: /bracket/hpcmips/test/2018.08.29.15.46.31/anita/install_tmp.iso IDE CD-ROM id 1, read-only, 184 MB (377200 sectors) gunziping /bracket/hpcmips/test/2018.08.29.15.46.31/anita/download/hpcmips/installation/netbsd.gz loading /tmp/gxemul.Ee7jDxdcH1OO removing /tmp/gxemul.Ee7jDxdcH1OO cpu0: starting at 0xffffffff80001000 NOTE: This is a LEGACY emulation mode. ------------------------------------------------------------------------------- cpu0: trying to write an invalid pagemask 0x1fffe000 to COP0_PAGEMASK [ 1.0000000] mem_cluster_cnt = 3 [ 1.0000000] mem_clusters[0] = {0,0x89e000} [ 1.0000000] mem_clusters[1] = {0x89e000,0x1762000} [ 1.0000000] mem_clusters[2] = {0x2000000,0x1000000} [ 1.0000000] phys segment: 0x89e000 @ 0 [ 1.0000000] skipping 0x89d000 @ 0x1000 (kernel) [ 1.0000000] phys segment: 0x1762000 @ 0x89e000 [ 1.0000000] adding 0x1762000 @ 0x89e000 to freelist 0 [ 1.0000000] phys segment: 0x1000000 @ 0x2000000 [ 1.0000000] adding 0x1000000 @ 0x2000000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.24 (RAMDISK) #0: Wed Aug 29 19:59:09 UTC 2018 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2018.08.29.15.46.31-hpcmips/obj/sys/arch/hpcmips/compile/RAMDISK [ 1.0000000] NEC MobilePro 880 (NEC VR4121 rev2.12 98.304MHz) [ 1.0000000] total memory = 49152 KB [ 1.0000000] avail memory = 39240 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floating point [ 1.0000000] cpu0: 32 TLB entries, 256MB max page size [ 1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache [ 1.0000000] cpu0: 8KB/16B direct-mapped write-back L1 data cache [ 1.0000000] vr4102ip0 at mainbus0 [ 1.0000000] vrbcu0 at vr4102ip0 addr 0x0b000000-001f [ 1.0000000] vrbcu0: CPU 98.304MHz, bus 32.768MHz, ram 49.152MHz [ 1.0000000] vrcmu0 at vr4102ip0 addr 0x0b000060-007f [ 1.0000000] vrgiu0 at vr4102ip0 addr 0x0b000100-011f [ 1.0000000] hpcioman9 at vrgiu0 [ 1.0000000] hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low [ 1.0000000] button1 at vrgiu0 port=3 id=13 active=high sense=edge [ 1.0000000] pwctl0 at vrgiu0 port=46 id=0 on=1 [ 1.0000000] vrdmaau0 at vr4102ip0 addr 0x0b000020-0037 [ 1.0000000] vrdcu0 at vr4102ip0 addr 0x0b000040-004b [ 1.0000000] com0 at vr4102ip0 addr 0x0c000000-0007: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df [ 1.0000000] vrkiu0 at vr4102ip0 addr 0x0b000180-019f [ 1.0000000] hpckbd0 at vrkiu0 [ 1.0000000] wskbd0 at hpckbd0 mux 1 [ 1.0000000] vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf [ 1.0000000] vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7 [ 1.0000000] vrled0 at vr4102ip0 addr 0x0b000240-024f [ 1.0000000] vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf [ 1.0000000] wsmouse0 at vrpiu0 mux 0 vrpiu0: WARNING: powerhook_establish is deprecated [ 1.0000000] vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff [ 1.0000000] pci0 at vrc4172pci0 bus 0 [ 1.0000000] vrc4172pwm0 at vr4102ip0 addr 0x15003880-3885 [ 1.0000000] vraiu0 at vr4102ip0 addr 0x0b000160-017f [ 1.0000000] audio0 at vraiu0: half duplex, playback, capture, mmap [ 1.0000000] vraiu0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100 [ 1.0000000] vraiu0: Latency: 69 milliseconds [ 1.0000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.0000000] wsbell at spkr0 not configured [ 1.0000000] vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000 [ 1.0000000] isa0 at vrisab0 [ 1.0000000] pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827 [ 1.0000000] pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B [ 1.0000000] pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only [ 1.0000000] pcmcia0 at pcic0 controller 0 socket 0 [ 1.0000000] pcmcia1 at pcic0 controller 0 socket 1 [ 1.0000000] pcmcia at pcic0 controller 1 socket 0 not configured [ 1.0000000] bivideo0 at mainbus0: pseudo video controller [ 1.0000000] bivideo0: framebuffer address: 0x8a0ea600 [ 1.0000000] hpcfb0 at bivideo0 [ 1.0000000] wsdisplay0 at hpcfb0 kbdmux 1 [ 1.0000000] btnmgr0 at mainbus0 [ 1.0000000] wskbd1 at btnmgr0 mux 1 [ 1.0000000] hpcapm0 at mainbus0: pseudo power management module [ 1.0000000] apmdev0 at hpcapm0: Power Management spec V1.2 [ 1.0000030] pcic0: using irq 589827 for socket events pcic0: WARNING: powerhook_establish is deprecated pcic0: WARNING: powerhook_establish is deprecated [ 1.6068145] wdc1 at pcmcia0 function 0: < , NinjaATA-, V1.0, AP00 > [ 1.6068145] pcic0: port 0x180-0x187 [ 1.6068145] pcic0: port 0x386-0x387 [ 1.6068145] wdc1: i/o mapped mode [ 1.6068145] pcmcia0: card irq 3 [ 2.2673675] atabus0 at wdc1 channel 0 [ 2.2673675] atapibus0 at atabus0: 2 targets [ 2.2673675] cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 [ 2.2673675] wd0: [ 2.2673675] wd0: 1536 MB, 3121 cyl, 16 head, 63 sec, 512 bytes/sect x 3145968 sectors WARNING: 3 errors while detecting hardware; check system log. [ 2.6673004] boot device: wd0 [ 2.6673004] pcmcia0: card irq 3 [ 3.0874359] root on md0a dumps on md0b [ 3.0874359] root file system type: ffs [ 3.0874359] kern.module.path=/stand/hpcmips/8.99.24/modules erase ^?, werase ^W, kill ^U, intr ^C NetBSD/hpcmips 8.99.24 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.24 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes[ 3.7081634] pcmcia0: card irq 3 [ 4.4082061] pcmcia0: card irq 3 On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xxxx>a: wd0 (1.5G, wd0.img)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqj[ 5.2486297] pcmcia0: card irq 3 [ 5.9487335] pcmcia0: card irq 3 [ 6.7094451] pcmcia0: card irq 3 Sysinst could not automatically determine the BIOS geometry of the disk. The physical geometry is 3121 cylinders 16 sectors 63 heads You will be prompted for the geometry. Please enter the number of sectors per track (maximum 63) and number of heads (maximum 256) that the BIOS uses to access the disk. The number of cylinders will be calculated from the disk size. sectors [63]: heads [255]: We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire disk xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1536 Megabytes. A full installation requires at least 288 Megabytes without X and at least 327 Megabytes if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installation xxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MB Cylinders Sectors Filesystem >a: 256 (1407) 522 526176 + / b: 128261 263088 swap c: 00 0 /tmp (mfs) d: 00 0 /usr e: 00 0 /var f: 00 0 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1150 MB, 12 free partitions. a: 256 (1407) 522 526176 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (mfs) c: 0 0 0 /tmp (mfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1150 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a: 0 1406 1407 FFSv1 Yes Yes / b: 1407 1535 128 swap c: 0 1535 1536 NetBSD partition d: 0 1535 1536 Whole disk e: 0 0 0 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... [ 8.4710418] pcmcia0: card irq 3 Status: Running Command: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- FinishedHit enter to continue Status: Running Command: /sbin/newfs -V2 -O 1 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 22272 inodes. ...............................................................................Finished Status: Running Command: /sbin/mount -tffs -o async /dev/wd0a /targetroot/ -------------------------------------------------------------------------------- FinishedHit enter to continue The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution set Selected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel (TX3912)No c: Kernel modulesYes d: BaseYes e: Configuration files (/etc) Yes f: Compiler toolsNo g: GamesNo h: Manual pagesNo i: MiscellaneousNo j: Test programsNo k: Text processing tools No l: X11 setsNone m: Source and debug sets None >x: Install selected sets>f: Compiler tools No x: Install selected setsYes f: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >j: Test programs NoYes j: Test programs Yes >l: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets l: X11 sets None >m: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets m: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVDxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fs xx g: Local directory xx h: Skip setxx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj[ 22.5194427] cd_setblksize: trying to change bsize, but no blk_desc Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /hpcmips/binary/sets c: Source set directory /source/sets d: Exit x: Continuelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkxxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjdevice [cd0a]: cd0d > >a: Device cd0d b: Binary set directory /hpcmips/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0d >x: Continue Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA49% |*****************2560 KiB 1.90 MiB/s 00:01 ETA70*******3648 KiB 2.060 ETA10***********| 5200 KiB 2.30 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA12% |****832 KiB 1.18 MiB/s 00:04 ETA55% |*******************371491 ETA8********** | 5696 KiB 1.650 ETA100******| 66604 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/base.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA12368 KiB 1.75 MiB/s 01:22 ETA23776 KiB 1.9015 ETA6% |**10176 KiB 2.420:56 ETA714519% |***4464 KiB 2.259 ETA106000 KiB 2.181:00 ETA3% |****990440:59 ETA5% |*****24067 ETA8% |******72068 ETA20% |*******307811283207 ETA24624 KiB 1.983% |********55206 ETA5859255 ETA6*402569*37743 ETA31678402*9536 KiB 1.872 ETA5*535040 ETA6555249 ETA8*77288 ETA843240*61666 ETA128484*6364 ETA6*963242 ETA87270431 ETA9*456020 ETA5064839 ETA1769638 ETA3*8044827 ETA421126 ETA6*44165 ETA5374 ETA8*85123 ETA60*9056012 ETA124821 ETA33120 ETA4*676828 ETA579847* 99 M6 ETA9*10214 ETA7152 ETA3*81 ETA490 ETA5*107318 ETA8*57 ETA976 ETA80*85 ETA2214 ETA3*203 ETA4512 ETA501 ETA7*9109 ETA8793079* | 13190358 ETA2* | 13546 ETA633715 ETA6* | 14222 ETA9* | 14630 ETA70100*687 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/etc.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA86% |****************************** | 3648 KiB 2.65 MiB/s 00:00 ETA97*** | 4096 KiB 2.03100**| 4210 KiB 1.59 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/comp.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA1728 KiB 2.53 MiB/s 02:22 ETA15184 KiB 2.0753 ETA74244 ETA28832 KiB 1.933:03 ETA1036882:58 ETA3% |*350449 ETA46896 KiB 1.863:05 ETA856052105673 ETA76081 ETA6% |**5792 KiB 1.912:56 ETA76496 KiB 1.898 ETA963287 ETA83193695 ETA9% |***366467 ETA404858 ETA6352 KiB 1.793:02 ETA107504 KiB 1.810 ETA4006781 ETA1384070 ETA2% |****492866506 ETA3908678 ETA51392411 ETA4292388803 ETA44645% |*****6896 KiB 1.59660730 ETA2144 KiB 1.6008 ETA7611224 ETA8% |******93761 ETA97366452:56 ETA21% |*******827271 ETA80384849 ETA2307296 ETA4563% |********8000 KiB 1.711 ETA1282 ETA492480338 ETA6087 ETA6*734453 ETA6647 99 MiB 1.7629 ETA1008476 ETA9*882 ETA3113 MiB 1.8018 ETA2*815 ETA3223 ETA2 ETA4620 ETA5*3007 ETA61755 ETA8*932 ETA9431:59 ETA40*77 ETA1515 ETA244 ETA3*62 ETA460549 ETA1557 ETA6 ETA6*94 ETA7732 ETA870 ETA9*839 ETA818 ETA5027 ETA56 ETA165 ETA2*903 ETA331 ETA4740 ETA9528 ETA5*2017 ETA2655 ETA64 ETA793 ETA48*1351 ETA9440 ETA7519 ETA8 ETA61*226 ETA464 ETA2872 ETA3*320 ETA4608 ETA5406 ETA6*24 ETA73463 ETA8772 ETA90 ETA9*5160:59 ETA270677 ETA1605 ETA14 ETA2*42 ETA380 ETA47248 ETA5*37 ETA685 ETA7813 ETA8*51 ETA9939 ETA80*918 ETA37 ETA46 ETA2884 ETA3003 ETA3*31 ETA4729 ETA5117 ETA6*55 ETA764 ETA93 ETA8221 ETA379* | 3240 ETA566519 ETA90748298 ETA30011 MiB 1.797 ETA283764426 ETA2* | 335106 MiB 1.687765 ETA5843290598406154 ETA433 ETA442 ETA35* | 3461 ETA70 ETA809 ETA695028 ETA217 ETA730496 ETA4855 ETA76658*44 ETA7321803 ETA398796542 ETA6039211 ETA210 ETA100*| 3630 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/misc.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA9% |***1408 KiB 2.07 MiB/s 00:06 ETA35% |************5504 KiB 1.944 ETA8*888260********9216 KiB 1.833 ETA5*1004802 ETA83******* | 12736 KiB 1.721 ETA100******| 152900 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA21088 KiB 829.58 KiB/s 00:42 ETA6% |**2304 KiB 1.10 M30 ETA16% |*****5888 KiB 1.421 ETA76272 KiB 1.359% |******976 KiB 1.086 ETA20% |*******755247 ETA7% |*********998483 ETA3***13632 KiB 1.2218 ETA9*4528 KiB 1.119 ETA47***74036 ETA53**9584 KiB 1.213 ETA6****2323280 ETA9**5408 KiB 1.3008 ETA7160417 ETA8***886425 ETA9905684** | 31104 KiB 1.294 ETA529694*** | 34560 KiB 1.311 ETA6889** | 36544 KiB 1.280 ETA907100*| 36665 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: Running Command: /bin/sh MAKEDEV all --------------------------------------------------------------------------------Finished Status: Running Command: /etc/rc.d/random_seed stop --------------------------------------------------------------------------------Saved entropy to /var/db/entropy-file. Finished The extraction of the selected sets for NetBSD-8.99.24 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj The extraction of the selected sets for NetBSD-8.99.24 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first.lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj Configure the additional items as needed. a: Configure networkconfigure b: TimezoneUTC c: Root shell/bin/sh d: Change root password***EMPTY*** e: Enable installation of binary packagesinstall f: Fetch and unpack pkgsrc for building from source install g: Enable sshdNO h: Enable ntpdNO i: Run ntpdate at bootNO j: Enable mdnsdNO k: Enable xdmNO l: Enable cgdYES m: Enable lvmNO n: Enable raidframeYES o: Add a user >x: Finished configuring The installation of NetBSD-8.99.24 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot. At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj NetBSD/hpcmips 8.99.24 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.24 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxraceback (most recent call last): File "/usr/pkg/bin/anita", line 150, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1623, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1590, in _install child.expect("(Hit enter to continue)|(x: Exit Install System)|(#)|(halting machine)|(halted by root)") File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 116, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 80, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '48M', '-d', '/bracket/hpcmips/test/2018.08.29.15.46.31/anita/wd0.img', '-emobilepro880', '-d', '/bracket/hpcmips/test/2018.08.29.15.46.31/anita/install_tmp.iso', '/bracket/hpcmips/test/2018.08.29.15.46.31/anita/download/hpcmips/installation/netbsd.gz'] buffer (last 100 chars): 'nstall sets or install additional sets \x0ex\x0f\x1b[19;16H\x00\x00\x00\x0ex\x0f d: Reboot the computer\x1b[19;64H\x00\x00\x00\x0ex\x0f\x1b[20;16' before (last 100 chars): 'nstall sets or install additional sets \x0ex\x0f\x1b[19;16H\x00\x00\x00\x0ex\x0f d: Reboot the computer\x1b[19;64H\x00\x00\x00\x0ex\x0f\x1b[20;16' after: match: None match_index: None exitstatus: None flag_eof: False pid: 10294 child_fd: 11 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(Hit enter to continue)|(x: Exit Install System)|(#)|(halting machine)|(halted by root)") 1100.28 real 2.84 user 10.34 sys