This is anita version 1.47 Using pexpect version 4.6.0 /usr/pkg/bin/anita \ --workdir=/bracket/hpcmips/test/2019.02.25.21.43.00/anita \ --structured-log-file=/bracket/hpcmips/test/2019.02.25.21.43.00/install.slog \ --vmm-args= \ --test-timeout \ 120000 \ --memory-size \ 48M \ install \ file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/ Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/netbsd.gz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/kernel/netbsd-GENERIC.gz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/floppy/boot-com1.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/floppy/boot2.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/floppy/boot3.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/floppy/boot4.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/floppy/boot5.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/floppy/boot6.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/cdrom/boot-com.iso... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/installation/misc/pxeboot_ia32.bin... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/kernel/netbsd-INSTALL.gz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/modules.tgz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/base.tgz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/etc.tgz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/comp.tgz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/misc.tgz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/tests.tgz... OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/hpcmips/test/2019.02.25.21.43.00/release/hpcmips/binary/sets/tests.tar.xz... missing but optional, so that's OK makefs \ -t \ cd9660 \ -o \ rockridge \ /bracket/hpcmips/test/2019.02.25.21.43.00/anita/install_tmp.iso \ /bracket/hpcmips/test/2019.02.25.21.43.00/anita/download Creating hard disk image... done. gxemul \ -M \ 48M \ -d \ /bracket/hpcmips/test/2019.02.25.21.43.00/anita/wd0.img \ -emobilepro880 \ -d \ /bracket/hpcmips/test/2019.02.25.21.43.00/anita/install_tmp.iso \ /bracket/hpcmips/test/2019.02.25.21.43.00/anita/download/hpcmips/installation/netbsd.gz child pid is 22919 cpu0: VR4121 (I+D = 16+8 KB) machine: NEC MobilePro 880 bootstring: netbsd.gz diskimage: /bracket/hpcmips/test/2019.02.25.21.43.00/anita/wd0.img IDE DISK id 0, read/write, 1536 MB (3145728 sectors) diskimage: /bracket/hpcmips/test/2019.02.25.21.43.00/anita/install_tmp.iso IDE CD-ROM id 1, read-only, 184 MB (377432 sectors) gunziping /bracket/hpcmips/test/2019.02.25.21.43.00/anita/download/hpcmips/installation/netbsd.gz loading /tmp/gxemul.TAvGzWIfGuV7 removing /tmp/gxemul.TAvGzWIfGuV7 cpu0: starting at 0xffffffff80001000 NOTE: This is a LEGACY emulation mode. ------------------------------------------------------------------------------- cpu0: trying to write an invalid pagemask 0x1fffe000 to COP0_PAGEMASK [ 1.0000000] mem_cluster_cnt = 3 [ 1.0000000] mem_clusters[0] = {0,0x8b7000} [ 1.0000000] mem_clusters[1] = {0x8b7000,0x1749000} [ 1.0000000] mem_clusters[2] = {0x2000000,0x1000000} [ 1.0000000] phys segment: 0x8b7000 @ 0 [ 1.0000000] skipping 0x8b6000 @ 0x1000 (kernel) [ 1.0000000] phys segment: 0x1749000 @ 0x8b7000 [ 1.0000000] adding 0x1749000 @ 0x8b7000 to freelist 0 [ 1.0000000] phys segment: 0x1000000 @ 0x2000000 [ 1.0000000] adding 0x1000000 @ 0x2000000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.34 (RAMDISK) #0: Tue Feb 26 08:07:02 UTC 2019 [ 1.0000000] root@lyta.NetBSD.org:/tmp/bracket/build/2019.02.25.21.43.00-hpcmips/obj/sys/arch/hpcmips/compile/RAMDISK [ 1.0000000] NEC MobilePro 880 (NEC VR4121 rev2.12 98.304MHz) [ 1.0000000] total memory = 49152 KB [ 1.0000000] avail memory = 39140 KB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated floating point [ 1.0000000] cpu0: 32 TLB entries, 256MB max page size [ 1.0000000] cpu0: 16KB/16B direct-mapped L1 instruction cache [ 1.0000000] cpu0: 8KB/16B direct-mapped write-back L1 data cache [ 1.0000000] vr4102ip0 at mainbus0 [ 1.0000000] vrbcu0 at vr4102ip0 addr 0x0b000000-001f [ 1.0000000] vrbcu0: CPU 98.304MHz, bus 32.768MHz, ram 49.152MHz [ 1.0000000] vrcmu0 at vr4102ip0 addr 0x0b000060-007f [ 1.0000000] vrgiu0 at vr4102ip0 addr 0x0b000100-011f [ 1.0000000] hpcioman9 at vrgiu0 [ 1.0000000] hpcin0 at hpcioman9 iochip vrgiu0, port 13, type 5, id 256, interrupt level low [ 1.0000000] button1 at vrgiu0 port=3 id=13 active=high sense=edge [ 1.0000000] pwctl0 at vrgiu0 port=46 id=0 on=1 [ 1.0000000] vrdmaau0 at vr4102ip0 addr 0x0b000020-0037 [ 1.0000000] vrdcu0 at vr4102ip0 addr 0x0b000040-004b [ 1.0000000] com0 at vr4102ip0 addr 0x0c000000-0007: ns16550a, working fifo [ 1.0000000] com0: console [ 1.0000000] vrrtc0 at vr4102ip0 addr 0x0b0000c0-00df [ 1.0000000] vrkiu0 at vr4102ip0 addr 0x0b000180-019f [ 1.0000000] hpckbd0 at vrkiu0 [ 1.0000000] wskbd0 at hpckbd0 mux 1 [ 1.0000000] vrpmu0 at vr4102ip0 addr 0x0b0000a0-00bf [ 1.0000000] vrdsu0 at vr4102ip0 addr 0x0b0000e0-00e7 [ 1.0000000] vrled0 at vr4102ip0 addr 0x0b000240-024f [ 1.0000000] vrpiu0 at vr4102ip0 addr 0x0b000120-013f, 0x0b0002a0-02bf [ 1.0000000] wsmouse0 at vrpiu0 mux 0 vrpiu0: WARNING: powerhook_establish is deprecated [ 1.0000000] vrc4172pci0 at vr4102ip0 addr 0x0aff0cf8-0cff [ 1.0000000] pci0 at vrc4172pci0 bus 0 [ 1.0000000] vrc4172pwm0 at vr4102ip0 addr 0x15003880-3885 [ 1.0000000] vraiu0 at vr4102ip0 addr 0x0b000160-017f [ 1.0000000] audio0 at vraiu0: half duplex, playback, capture, mmap [ 1.0000000] vraiu0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100 [ 1.0000000] vraiu0: Latency: 69 milliseconds [ 1.0000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.0000000] wsbell at spkr0 not configured [ 1.0000000] vrisab0 at vrgiu0: ISA port 0x14000000-0x18000000 mem 0x10000000-0x14000000 [ 1.0000000] isa0 at vrisab0 [ 1.0000000] pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827 [ 1.0000000] pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B [ 1.0000000] pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only [ 1.0000000] pcmcia0 at pcic0 controller 0 socket 0 [ 1.0000000] pcmcia1 at pcic0 controller 0 socket 1 [ 1.0000000] pcmcia at pcic0 controller 1 socket 0 not configured [ 1.0000000] bivideo0 at mainbus0: pseudo video controller [ 1.0000000] bivideo0: framebuffer address: 0x8a0ea600 [ 1.0000000] hpcfb0 at bivideo0 [ 1.0000000] wsdisplay0 at hpcfb0 kbdmux 1 [ 1.0000000] btnmgr0 at mainbus0 [ 1.0000000] wskbd1 at btnmgr0 mux 1 [ 1.0000000] hpcapm0 at mainbus0: pseudo power management module [ 1.0000000] apmdev0 at hpcapm0: Power Management spec V1.2 [ 1.0000030] pcic0: using irq 589827 for socket events pcic0: WARNING: powerhook_establish is deprecated pcic0: WARNING: powerhook_establish is deprecated [ 1.6053802] wdc1 at pcmcia0 function 0: < , NinjaATA-, V1.0, AP00 > [ 1.6053802] pcic0: port 0x180-0x187 [ 1.6053802] pcic0: port 0x386-0x387 [ 1.6053802] wdc1: i/o mapped mode [ 1.6053802] pcmcia0: card irq 3 [ 2.2659942] atabus0 at wdc1 channel 0 [ 2.2659942] atapibus0 at atabus0: 2 targets [ 2.2659942] cd0 at atapibus0 drive 1: cdrom removable wd0 at atabus0 drive 0 [ 2.2659942] wd0: [ 2.2659942] wd0: 1536 MB, 3121 cyl, 16 head, 63 sec, 512 bytes/sect x 3145968 sectors WARNING: 3 errors while detecting hardware; check system log. [ 2.6861297] boot device: wd0 [ 2.6861297] pcmcia0: card irq 3 [ 3.1065704] root on md0a dumps on md0b [ 3.1065704] root file system type: ffs [ 3.1065704] kern.module.path=/stand/hpcmips/8.99.34/modules erase ^?, werase ^W, kill ^U, intr ^C NetBSD/hpcmips 8.99.34 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.34 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes[ 3.7868377] pcmcia0: card irq 3 [ 4.4872467] pcmcia0: card irq 3 On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disks xxxx>a: wd0 (1.5G, wd0.img)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqj[ 5.1275054] pcmcia0: card irq 3 [ 5.8279449] pcmcia0: card irq 3 [ 6.5881683] pcmcia0: card irq 3 Sysinst could not automatically determine the BIOS geometry of the disk. The physical geometry is 3121 cylinders 16 sectors 63 heads You will be prompted for the geometry. Please enter the number of sectors per track (maximum 63) and number of heads (maximum 256) that the BIOS uses to access the disk. The number of cylinders will be calculated from the disk size. sectors [63]: heads [255]: We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's Master Boot Record (MBR) partition table, this is split further by the BSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. About 2.4G is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 3.0G if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire disk xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 976 Megabytes without X and at least 1232 Megabytes if the X sets are included. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installation xxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MB Cylinders Sectors Filesystem >a: 944 (1406) 1919 1934352 + / b: 128261 263088 swap c: 00 0 /tmp (mfs) d: 00 0 /usr e: 00 0 /var f: 00 0 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 462 MB, 12 free partitions. a: 944 (1406) 1919 1934352 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (mfs) c: 0 0 0 /tmp (mfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 462 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a: 1 1406 1406 FFSv1 Yes Yes / b: 1407 1535 128 swap c: 1 1535 1535 NetBSD partition d: 0 1535 1536 Whole disk e: 0 0 0 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yes xmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... [ 8.3290435] pcmcia0: card irq 3 Status: Running Command: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- FinishedHit enter to continue Status: Running Command: /sbin/newfs -V2 -O 1 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1406.2MB (2879856 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.78MB, 11250 blks, 22144 inodes. ...............................................................................Finished Status: Running Command: /sbin/mount -tffs -o async /dev/wd0a /targetroot/ -------------------------------------------------------------------------------- FinishedHit enter to continue The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution set Selected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel (TX3912)No c: Kernel modulesYes d: BaseYes e: Configuration files (/etc) Yes f: Compiler toolsNo g: GamesNo h: Manual pagesNo i: MiscellaneousNo j: Test programsNo k: Text processing tools No l: X11 setsNone m: Source and debug sets None >x: Install selected sets>f: Compiler tools No x: Install selected setsYes f: Compiler tools Yes >i: Miscellaneous NoYes i: Miscellaneous Yes >j: Test programs NoYes j: Test programs Yes >l: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clients No xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above sets xx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets l: X11 sets None >m: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above sets xx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Yes No No Yes Yestools No None sets None sets m: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVDxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fs xx g: Local directory xx h: Skip setxx i: Skip set group xx j: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqj[ 24.5375396] cd_setblksize: trying to change bsize, but no blk_desc Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory/hpcmips/binary/sets c: Source set directory/source/sets d: Exit x: Continuelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkxxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjdevice [cd0a]: cd0d > >a: Device cd0d b: Binary set directory/hpcmips/binary/sets c: Source set directory/source/sets d: Exit x: Continue a: Device cd0d >x: Continue Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA15% |*****832 KiB 1.51 MiB/s 00:02 ETA91% |******************************* | 4864 KiB 2.090 ETA100****| 5340 KiB 2.14 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA10% |***768 KiB 1.18 MiB/s 00:05 ETA54% |******************4160 KiB 1.472 ETA4100*****************| 768570 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/base.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA12368 KiB 1.28 MiB/s 01:49 ETA68326 ETA4% |*6464 KiB 1.719 ETA6% |**93494 ETA71152017 ETA10% |***484805 ETA161924 ETA3% |****9200 KiB 1.655 ETA42099225% |*****22734 ETA329653 ETA7611241 ETA8% |******7008220% |*******30080409 ETA234087 ETA3% |********48802463521570566 ETA7*400644 ETA1152 KiB 1.556 ETA85369*32645 ETA30537644 ETA1608033*985641 ETA45004836*36320:59 ETA9548 ETA8*651270247 ETA40*600965 ETA180033*380823 ETA40005681611 ETA72647*7020849 ETA878450*424026 ETA4962*756814 ETA8245*811522 ETA536746080 ETA8*556239 ETA60*864017 ETA96928029245 ETA6084*54813 ETA6*77921 ETA8 97 M0 ETA70*101227 ETA2*45 ETA355*83 ETA32 ETA71111 ETA8*200 ETA94 MiB 1.4919 ETA80*581797 ETA286 ETA4*224 ETA5503 ETA7*51 ETA49878790* | 12909 ETA613158 ETA2* | 1327 ETA3446 ETA35* | 13744 ETA7952 ETA9* | 1420 ETA33100*10 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/etc.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA26% |*********1088 KiB 1.70 MiB/s 00:01 ETA100**************************| 4130 KiB 1.430 ETA39 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/comp.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA1728 KiB 2.58 MiB/s 02:17 ETA15184 KiB 13:43 ETA27872250 ETA11008838 ETA3% |*3632 KiB 1.605 ETA465121 ETA5977628 ETA21248 KiB 1.5833 ETA6% |**3104 KiB 1.6128 ETA6800775241 ETA90450 ETA83116818 ETA6167 ETA9% |***4752488038 ETA107312 KiB 1.5823 ETA56814051272 ETA134481 ETA2% |****4518 ETA9286720323 ETA72964 ETA3915206 ETA451840 KiB 1.48260877 ETA472059 ETA5% |*****664331 ETA6964829 ETA6182446 ETA7387253 ETA45 ETA8% |******7520619 ETA849709126 ETA11047 ETA20% |*******500882 ETA13673 ETA18848908 ETA9232710 ETA2808808 ETA3968 KiB 1.504 ETA3% |********78010 ETA49126422:56 ETA520325 ETA6*606441 ETA387 98 MiB 1.5547 ETA810164 ETA23 ETA9*570 ETA30937 ETA1135 ETA2*682 ETA320929 ETA437 ETA5*64 ETA69 MiB 1.602 ETA7330 ETA8*7117 ETA95 ETA9414 ETA223 ETA40*41 ETA60 ETA1809 ETA98 ETA2526 ETA33*63 ETA46030 ETA5141:58 ETA6*77 ETA86 ETA7714 ETA842 ETA9*5271 ETA80 ETA508049 ETA18 ETA147 ETA56 ETA2*84 ETA3903 ETA22 ETA31 ETA450 ETA5*9138 ETA620325 ETA7732 ETA8*81 ETA912428 ETA360*75 ETA1203 ETA241 ETA3*719 ETA43156 ETA554 ETA6*92 ETA1 ETA74309 ETA877 ETA9*505 ETA7033 ETA1562 ETA1 ETA2*90:59 ETA3627 ETA3474 ETA5*712 ETA6549 ETA787 ETA98*8275 ETA3962 ETA80*71910 ETA2438 ETA3*86 ETA43023 ETA551 ETA66* | 31028 ETA746 ETA865 ETA684 ETA59* | 31943 ETA2132 ETA2290311 ETA04 MiB 1.598570 ETA61674382119 ETA09 MiB 1.49872* | 330651438 ETA22103983736556 ETA4475 ETA8324 ETA4033 ETA5* | 34122 ETA2640 ETA509 ETA6178 ETA078 MiB 1.297 ETA8976 ETA5065145 ETA8*322104 ETA193876453 ETA432952 ETA61 ETA710 ETA100*| 3580 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/misc.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA16% |*****2496 KiB 1.39 MiB/s 00:08 ETA21% |*******3264 KiB 1.527 ETA3% |********58438*****582436 ETA4***748845 ETA9*61652*8000 KiB 1.3769******10688 KiB 1.423 ETA84***** | 12864 KiB 1.351 ETA98***** | 151000 ETA100*| 153001 Finished Status: Running Command: progress -zf /mnt2//hpcmips/binary/sets/tests.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 0 0.00 KiB/s --:-- ETA21152 KiB 531.67 KiB/s 01:13 ETA4% |*664 KiB 685.740:56 ETA6% |**2816 KiB 963.639 ETA10% |***4416 KiB 909.965% |*****6080 KiB 0.99 M3 ETA144 KiB 1.008% |******7488 KiB 991.90 K9936 KiB 869.117 ETA8.158064 KiB 805.540 ETA24% |********9728 KiB 806.2638 ETA8*11648 KiB 878.132 ETA31*2800 KiB 899.30 ETA8***5488 KiB 961.1425 ETA40*6256 KiB 981.204 ETA27088 KiB 931.995 ETA152 KiB 914.537**9328 KiB 886.753 ETA8776 KiB 896.9956***22784 KiB 974.118 ETA61**5024 KiB 0.98 M5 ETA7**7456 KiB 998.41 K2 ETA8516 KiB 9893 ETA20 KiB 967.1674**30144 KiB 0.98 M0 ETA5*528 KiB 972.63 K81** | 32768 KiB 955.9407 ETA832 KiB 955.37960 KiB 946.74* | 33984 KiB 931.246 ETA6* | 34944 KiB 938.235 ETA85584 KiB 944.1491* | 37120 KiB 945.973 ETA5** | 38400 KiB 924.122 ETA2.9569168 KiB 916.21 ETA9* | 40256 KiB 900.870 ETA320 KiB 901.88100*| 40410 KiB 875.37 Finished All selected distribution sets unpacked successfully. Making device nodes ... Status: Running Command: /bin/sh MAKEDEV all --------------------------------------------------------------------------------Finished Status: Running Command: /etc/rc.d/random_seed stop --------------------------------------------------------------------------------Saved entropy to /var/db/entropy-file. Finished The extraction of the selected sets for NetBSD-8.99.34 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj The extraction of the selected sets for NetBSD-8.99.34 is complete. The system is now able to boot from the selected hard disk. To complete the installation, sysinst will give you the opportunity to configure some essential things first. lqqqqqqqqqqqqqqqqqqqqqqqk x>Hit enter to continue x mqqqqqqqqqqqqqqqqqqqqqqqj Configure the additional items as needed. a: Configure networkconfigure b: TimezoneUTC c: Root shell/bin/sh d: Change root password***EMPTY*** e: Enable installation of binary packagesinstall f: Fetch and unpack pkgsrcinstall g: Enable sshdNO h: Enable ntpdNO i: Run ntpdate at bootNO j: Enable mdnsdNO k: Enable xdmNO l: Enable cgdYES m: Enable lvmNO n: Enable raidframeYES o: Add a user >x: Finished configuring The installation of NetBSD-8.99.34 is now complete. The system should boot from hard disk. Follow the instructions in the INSTALL document about final configuration of your system. We also recommend reading the afterboot(8) manpage; it contains a list of things to be checked after the first complete boot. At a minimum, you should edit /etc/rc.conf to match your needs. See /etc/defaults/rc.conf for the default values. lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqj NetBSD/hpcmips 8.99.34 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. If you booted from an external device, you may now remove it. Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.34 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxraceback (most recent call last): File "/usr/pkg/bin/anita", line 151, in status = main() File "/usr/pkg/bin/anita", line 132, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1798, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1762, in _install child.expect("(Hit enter to continue)|(x: Exit Install System)|(#)|(halting machine)|(halted by root)") File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 179, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 341, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 369, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 119, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 82, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/gxemul args: ['/usr/pkg/bin/gxemul', '-M', '48M', '-d', '/bracket/hpcmips/test/2019.02.25.21.43.00/anita/wd0.img', '-emobilepro880', '-d', '/bracket/hpcmips/test/2019.02.25.21.43.00/anita/install_tmp.iso', '/bracket/hpcmips/test/2019.02.25.21.43.00/anita/download/hpcmips/installation/netbsd.gz'] buffer (last 100 chars): 'x\x0f\x1b[19;16H\x00\x00\x00\x0ex\x0f d: Reboot the computer\x1b[19;64H\x00\x00\x00\x0ex\x0f\x1b[20;16H\x00\x00\x00\x0ex\x0f e: Utility menu\x1b[20;64H\x00\x00\x00\x0ex\x0f\x1b[2' before (last 100 chars): 'x\x0f\x1b[19;16H\x00\x00\x00\x0ex\x0f d: Reboot the computer\x1b[19;64H\x00\x00\x00\x0ex\x0f\x1b[20;16H\x00\x00\x00\x0ex\x0f e: Utility menu\x1b[20;64H\x00\x00\x00\x0ex\x0f\x1b[2' after: match: None match_index: None exitstatus: None flag_eof: False pid: 22919 child_fd: 12 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile('(Hit enter to continue)|(x: Exit Install System)|(#)|(halting machine)|(halted by root)') 1191.41 real 4.43 user 7.02 sys