This is anita version 2.6 Using pexpect version 4.8.0 /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.04.20.15.57.23/anita \ --structured-log-file=/bracket/i386/test/2018.04.20.15.57.23/install.slog \ '--vmm-args=-accel nvmm' \ --memory-size 128M \ install \ file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/ Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/misc/pxeboot_ia32.bin... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/floppy/boot-com1.fs... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/floppy/boot2.fs... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/floppy/boot3.fs... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/floppy/boot4.fs... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/floppy/boot5.fs... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/floppy/boot6.fs... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/installation/cdrom/boot-com.iso... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/kern-GENERIC.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/modules.tgz... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/modules.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/base.tgz... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/base.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/etc.tgz... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/etc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/comp.tgz... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/comp.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/misc.tgz... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/misc.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/rescue.tgz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/rescue.tar.xz... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/tests.tgz... OK Downloading file:///bracket/i386/test/2018.04.20.15.57.23/release/i386/binary/sets/tests.tar.xz... missing but optional, so that's OK /usr/sbin/makefs \ -t cd9660 \ -o rockridge \ /bracket/i386/test/2018.04.20.15.57.23/anita/install_tmp.iso \ /bracket/i386/test/2018.04.20.15.57.23/anita/download Creating hard disk image... done. QEMU emulator version 5.1.0 Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers qemu path: /usr/pkg/bin/qemu-system-i386 qemu package: qemu-5.1.0nb8 glib2 package: glib2-2.64.1 qemu-system-i386 \ -m 128 \ -drive file=/bracket/i386/test/2018.04.20.15.57.23/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive file=/bracket/i386/test/2018.04.20.15.57.23/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot a \ -drive file=/bracket/i386/test/2018.04.20.15.57.23/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -accel nvmm child pid is 11571 NetBSD Virtual Machine Monitor accelerator is operational SeaBIOS (version rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org) iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+07F8F290+07EEF290 CA00 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-14584288\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 5.1.0 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block166): /bracket/i386/test/2018.04.20.15.57.23/anita/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback floppy0 (#block317): /bracket/i386/test/2018.04.20.15.57.23/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[16] Removable device: not locked, tray closed Cache mode: writeback ide0-cd1 (#block527): /bracket/i386/test/2018.04.20.15.57.23/anita/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brackchange floppy0 /bracke -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...change floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/tchange floppy0 /bracket/i386/te \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...[Dchange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...change floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.04change floppy0 /bracket/i386/test/2018.04.change floppy0 /bracket/i386/test/2018.04.2change floppy0 /bracket/i386/test/2018.04.20chan /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+5663428|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...ge floppy0 /bracket/i386/test/2018.04.20.change floppy0 /bracket/i386/test/2018.04.20.1change floppy0 /bracket/i386/test/2018.04.20.15change floppy0 /bracket/i386/test/2018.04.20.15.change floppy0 /bracket/i386/test/2018.04.20.15.5change floppy0 /bracket/i386/test/2018.04.20.15.57 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+850108=0x141f3b4 [ 1.0000000] ksyms: Symbol table not found [ 1.0000000] ksyms: String table not found [ 1.0000000] ksyms: Perhaps the kernel is stripped? [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.14 (INSTALL) #0: Wed May 19 20:03:29 UTC 2021 [ 1.0000000] root@babylon5.netbsd.org:/tmp/build/2018.04.20.15.57.23-i386/obj/sys/arch/i386/compile/INSTALL [ 1.0000000] total memory = 127 MB [ 1.0000000] avail memory = 105 MB [ 1.0000000] cpu_rng: RDSEED [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000F58D0 000014 (v00 BOCHS ) [ 1.0000030] ACPI: RSDT 0x0000000007FE14D2 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACP 0x0000000007FE1386 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 1.0000030] ACPI: DSDT 0x0000000007FE0040 001346 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACS 0x0000000007FE0000 000040 [ 1.0000030] ACPI: APIC 0x0000000007FE13FA 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 1.0000030] ACPI: HPET 0x0000000007FE1472 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 1.0000030] ACPI: WAET 0x0000000007FE14AA 000028 (v01 BOCHS BXPCWAET 00000001 BXPC 00000001) [ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000030] ioapic0 at mainbus0 apid 0 [ 1.0000030] cpu0 at mainbus0 apid 0 qemu-system-i386: NVMM: Unexpected RDMSR 0x250, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x258, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x259, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x268, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x269, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x26a, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x26b, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x26c, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x26d, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x26e, ignored qemu-system-i386: NVMM: Unexpected RDMSR 0x26f, ignored qemu-system-i386: NVMM: Unexpected WRMSR 0x250 [val=0x0], ignored qemu-system-i386: NVMM: Unexpected WRMSR 0x258 [val=0x0], ignored qemu-system-i386: NVMM: Unexpected WRMSR 0x259 [val=0x0], ignored qemu-system-i386: NVMM: Unexpected WRMSR 0x268 [val=0x0], ignored qemu-system-i386: NVMM: Unexpected WRMSR 0x269 [val=0x0], ignored qemu-system-i386: NVMM: Unexpected WRMSR 0x26a [val=0x0], ignored qemu-system-i386: NVMM: Unexpected WRMSR 0x26b [val=0x0], ignored qemu-system-i386: NVMM: Unexpected WRMSR 0x26c [val=0x0], ignored qemu-system-i386: NVMM: Unexpect[ 1.0000030] cpu0: AMD EPYC 7402P 24-Core Processor , id 0x830f10 [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180313 [ 1.0022332] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0030741] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0030741] pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 [ 1.0030741] FDC0 (PNP0700) at acpi0 not configured [ 1.0030741] LPT1 (PNP0400) at acpi0 not configured [ 1.0030741] COM1 (PNP0501) at acpi0 not configured [ 1.0030741] qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b [ 1.0030741] apm0 at acpi0: Power Management spec V1.2 [ 1.0030741] ACPI: Enabled 2 GPEs in block 00 to 0F [ 1.0030741] pckbd0 at pckbc1 (kbd slot) [ 1.0030741] pckbc1: using irq 1 for kbd slot [ 1.0030741] wskbd0 at pckbd0 mux 1 [ 1.0030741] pms0 at pckbc1 (aux slot) [ 1.0030741] pms0: Failed to get EC signature. [ 1.0030741] pms0: Failed to initialize an ALPS device. [ 1.0030741] pckbc1: using irq 12 for aux slot [ 1.0030741] wsmouse0 at pms0 mux 0 [ 1.0030741] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0030741] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.0030741] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.0030741] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.0030741] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.0030741] atabus0 at piixide0 channel 0 [ 1.0030741] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.0030741] atabus1 at piixide0 channel 1 [ 1.0030741] piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) [ 1.0030741] piixpm0: 24-bit timer [ 1.0030741] piixpm0: interrupting at ioapic0 pin 9 [ 1.0030741] iic0 at piixpm0: I2C bus [ 1.0030741] vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) [ 1.0030741] wsdisplay0 at vga1 kbdmux 1 [ 1.0030741] drm at vga1 not configured [ 1.0030741] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0030741] wm0: interrupting at ioapic0 pin 11 [ 1.0030741] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0030741] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0030741] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0030741] isa0 at pcib0 [ 1.0030741] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.0030741] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.0030741] com0: console [ 1.0030741] attimer0 at isa0 port 0x40-0x43 [ 1.0030741] pcppi0 at isa0 port 0x61 [ 1.0030741] midi0 at pcppi0: PC speaker [ 1.0030741] sysbeep0 at pcppi0 [ 1.0030741] isapnp0 at isa0 port 0x279 [ 1.0030741] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0030741] attimer0: attached to pcppi0 [ 1.0030741] acpicpu0 at cpu0: ACPI CPU [ 1.0859671] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.0859671] atapibus0 at atabus0: 2 targets [ 1.1021831] cd0 at atapibus0 drive 1: cdrom removable [ 1.1021831] wd0 at atabus0 drive 0 [ 1.1021831] wd0: [ 1.1021831] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 6.3151480] atapibus1 at atabus1: 2 targets [ 6.3151480] cd1 at atapibus1 drive 0: cdrom removable [ 6.3273949] WARNING: 2 errors while detecting hardware; check system log. [ 6.3273949] boot device: fd0 [ 14.3976922] (st0 0xe0 cyl 0) [ 14.3976922] fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) [ 14.6195376] root on md0a dumps on md0b [ 14.6195376] root file system type: ffs [ 14.6195376] kern.module.path=/stand/i386/8.99.14/modules [ 14.6195376] clock: unknown CMOS layout [ 14.6222380] warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) erase ^?, werase ^W, kill ^U, intr ^C NetBSD/i386 8.99.14 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.14 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: FTPxx c: HTTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 20060 KiB 109.90 M00:00 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA256 KiB 151.0304:58 ETA8728.625:49 ETA 80.409:19 ETA65.3911:27 ETA51.554:32 ETA44.806:43 ETA38.04- stalled -4.150.2027.755.33.440.980718.407.65[6% |**| 2944 KiB 168.58 KiB/s 04:11 ETA59.824 ETA81% |****************************37120 KiB 1.89 M0:04 ETA100*******| 45272.20 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[2% || 4224 KiB 2.55 MiB/s 01:01 ETA[4% |*| 7808 KiB 3.68 MiB/s 00:41 ETA[7% |**| 11584 KiB 3.20 MiB/s 00:46 ETA2.5558 ETA[9% |***| 15360 KiB 2.77 MiB/s 00:52 ETA301:03 ETA[11% |***| 18880 KiB 2.50 MiB/s 00:56 ETA[12% |****| 20608 KiB 2.37 MiB/s 00:59 ETA324001[15% |*****| 25408 KiB 2.44 MiB/s 00:55 ETA121:03 ETA[17% |*****| 28544 KiB 2.29 MiB/s 00:57 ETA[20% |*******| 34112 KiB 2.46 MiB/s 00:51 ETA305 ETA[ 22% |*******| 36480 KiB 2.30 MiB/s 00:54 ETA255 ETA[ 27% |*********| 45056 KiB 2.32 MiB/s 00:50 ETA251 ETA[ 29% |**********| 48768 KiB 2.29 MiB/s 00:49 ETA151 ETA[ 31% |**********| 52288 KiB 2.25 MiB/s 00:48 ETA[ 33% |***********| 55296 KiB 2.28 MiB/s 00:46 ETA18 ETA[ 36% |************| 60288 KiB 2.30 MiB/s 00:44 ETA245 ETA352118 ETA83079 ETA1.9851 ETA22 ETA854 ETA[ 38% |*************| 63552 KiB 1.90 MiB/s 00:51 ETA833 ETA[ 40% |**************| 66816 KiB 1.89 MiB/s 00:50 ETA[ 42% |**************| 69376 KiB 1.89 MiB/s 00:49 ETA3*71424907 ETA[ 45% |***************| 74816 KiB 1.93 MiB/s 00:45 ETA896 ETA[ 47% |****************| 77888 KiB 1.91 MiB/s 00:44 ETA875 ETA[ 49% |*****************| 81152 KiB 1.90 MiB/s 00:42 ETA863 ETA[ 51% |*****************| 84416 KiB 1.88 MiB/s 00:41 ETA[ 53% |******************| 87488 KiB 1.91 MiB/s 00:39 ETA8740 ETA[ 56% |*******************| 92352 KiB 1.94 MiB/s 00:36 ETA1[ 60% |*********************| 98688 KiB 1.90 MiB/s 00:33 ETA[ 62% |*********************| 100 MiB 1.97 MiB/s 00:30 ETA[ 64% |**********************| 103 MiB 1.98 MiB/s 00:28 ETA59 ETA[ 66% |***********************| 106 MiB 1.96 MiB/s 00:27 ETA2[ 69% |************************| 111 MiB 1.98 MiB/s 00:24 ETA[ 71% |************************| 115 MiB 2.00 MiB/s 00:22 ETA1.973 ETA[ 74% |*************************| 119 MiB 2.00 MiB/s 00:20 ETA1.97[ 76% |**************************| 122 MiB 1.99 MiB/s 00:18 ETA69 ETA[ 79% |***************************| 127 MiB 2.00 MiB/s 00:16 ETA1.98[ 81% |**************************** | 130 MiB 1.98 MiB/s 00:15 ETA[ 83% |***************************** | 133 MiB 2.01 MiB/s 00:13 ETA7*41809 ETA[ 90% |******************************* | 145 MiB 2.12 MiB/s 00:07 ETA2*845 ETA[ 98% |********************************** | 158 MiB 2.24 MiB/s 00:01 ETA96030 ETA100*4 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[56% |*******************| 2368 KiB 1.22 MiB/s 00:01 ETA100****************| 42102.130 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[0% || 1664 KiB 904.90 KiB/s 06:10 ETA[1% || 5696 KiB 2.61 MiB/s 02:03 ETA[2% || 6784 KiB 1.73 MiB/s 03:06 ETA90882.12:29 ETA[3% |*| 11072 KiB 1.90 MiB/s 02:47 ETA8408452 ETA[4% |*| 16064 KiB 2.09 MiB/s 02:29 ETA1.8450 ETA[5% |*| 18368 KiB 1.95 MiB/s 02:39 ETA663:06 ETA[7% |**| 24000 KiB 2.11 MiB/s 02:24 ETA[8% |**| 29184 KiB 2.28 MiB/s 02:11 ETA1221 ETA[11% |***| 37504 KiB 2.56 MiB/s 01:54 ETA352:04 ETA[ 11% |***| 40256 KiB 2.40 MiB/s 02:00 ETA2210 ETA[ 11% |***| 40256 KiB 2.13 MiB/s 02:15 ETA0024 ETA[ 11% |***| 40256 KiB 1.93 MiB/s 02:29 ETA[ 11% |***| 40256 KiB 1.82 MiB/s - stalled -75[ [ 144.1409223] cd0a: error reading fsbn 160140 of 160140-160267 (cd0 bn 160140; 11% |***| 40256 KiB 1.67 MiB/s - stalled -0[ 11% |***| 40256 KiB 1.54 MiB/s - stalled -47[ 11% |***| 40256 KiB 1.43 MiB/s - stalled -38[ 11% |***| 40256 KiB 1.33 MiB/s - stalled -[ [ 151.4553235] cd0a: error reading fsbn 160268 of 160268-160395 (cd0 bn 160268; 11% |***| 40256 KiB 1.28 MiB/s - stalled -4[ 11% |***| 40256 KiB 1.20 MiB/s - stalled -17[ 11% |***| 40256 KiB 1.13 MiB/s - stalled -0[ 11% |***| 40256 KiB 1.08 MiB/s - stalled -4[ [ 158.6647333] cd0a: error reading fsbn 158476 of 158476-158491 (cd0 bn 158476; gzip: failed to read stdin: Device busy tar: End of archive volume 1 reachedtar: Unexpected EOF on archive file 11% |*** | 40256 KiB 1.04 MiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 157, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 2279, in install self._install() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 1433, in _install self._install_using_sysinst() File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 1987, in _install_using_sysinst 10800) File "/usr/pkg/lib/python3.7/site-packages/anita.py", line 241, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 344, in expect timeout, searchwindowsize, async_) File "/usr/pkg/lib/python3.7/site-packages/pexpect/spawnbase.py", line 372, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 181, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python3.7/site-packages/pexpect/expect.py", line 144, in timeout raise exc pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.04.20.15.57.23/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.04.20.15.57.23/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a', '-drive', 'file=/bracket/i386/test/2018.04.20.15.57.23/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-accel', 'nvmm'] buffer (last 100 chars): b'\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): b'\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 11571 child_fd: 9 closed: False timeout: 3600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile(b"(a: Progress bar)|(Select medium|Install from)|(Enter the CDROM device)|(unused-group-should-not-match)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(([a-z]): Set sizes of NetBSD partitions)|(a partitioning scheme)|(([a-z]): Use the entire disk)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode)|(Please enter a name for your NetBSD disk)|(ready to install NetBSD on your hard disk)|(We now have your (?:BSD.|GPT.)?(?:disklabel )?partitions)|(Your disk currently has a non-NetBSD partition)|(Sysinst could not automatically determine the BIOS geometry of the disk)|(Do you want to re-edit the disklabel partitions)|(Command: )|(not enough entropy)") 11054.29 real 55.22 user 90.55 sys