This is anita version 1.44 /usr/pkg/bin/anita \ --workdir=/bracket/i386/test/2018.06.14.06.58.15/anita \ --structured-log-file=/bracket/i386/test/2018.06.14.06.58.15/install.slog \ --vmm-args=-tb-size 128 \ --test-timeout \ 90000 \ --memory-size \ 128M \ install \ file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/ Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/floppy/boot-com1.fs... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/floppy/boot2.fs... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/floppy/boot3.fs... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/floppy/boot4.fs... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/floppy/boot5.fs... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/floppy/boot6.fs... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/floppy/boot7.fs... missing but optional, so that's OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/cdrom/boot-com.iso... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/installation/misc/pxeboot_ia32.bin... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/binary/kernel/netbsd-INSTALL.gz... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/binary/sets/kern-GENERIC.tgz... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/binary/sets/modules.tgz... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/binary/sets/base.tgz... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/binary/sets/etc.tgz... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/binary/sets/comp.tgz... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/binary/sets/misc.tgz... OK Downloading file:///bracket/i386/test/2018.06.14.06.58.15/release/i386/binary/sets/tests.tgz... OK makefs -t cd9660 -o rockridge /bracket/i386/test/2018.06.14.06.58.15/anita/install_tmp.iso /bracket/i386/test/2018.06.14.06.58.15/anita/download Creating hard disk image...QEMU emulator version 2.11.1 Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers done. qemu-system-i386 -m \ 128 \ -drive \ file=/bracket/i386/test/2018.06.14.06.58.15/anita/wd0.img,format=raw,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/i386/test/2018.06.14.06.58.15/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on \ -drive \ file=/bracket/i386/test/2018.06.14.06.58.15/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on \ -boot \ a \ -tb-size \ 128 child pid is 5063 SeaBIOS (version rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org) iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+07F915A0+07EF15A0 C980 Press Ctrl-B to configure iPXE (PCI 00:03.0)... Booting from Floppy... NetBSD/x86 ustarfs Primary Bootstrap NetBSD floppy diskette installation =============================================================================== ACPI should work on all modern and legacy hardware, however if you have problems, please try disabling it. 1. Install NetBSD 2. Install NetBSD (no ACPI) 3. Install NetBSD (no ACPI, no SMP) 4. Drop to boot prompt Choose an option; RETURN for default; SPACE to stop countdown. Option 1 will be chosen in 10 seconds. 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. 0 seconds. |/-14757988\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 1, insert disk 2, and press return...QEMU 2.11.1 monitor - type 'help' for more information (qemu) iininfinfoinfo info binfo blinfo bloinfo blocinfo block ide0-hd0 (#block104): /bracket/i386/test/2018.06.14.06.58.15/anita/wd0.img (raw) Attached to: /machine/unattached/device[23] Cache mode: writeback ide0-cd1 (#block311): /bracket/i386/test/2018.06.14.06.58.15/anita/install_tmp.iso (raw, read-only) Attached to: /machine/unattached/device[24] Removable device: not locked, tray closed Cache mode: writeback floppy0 (#block595): /bracket/i386/test/2018.06.14.06.58.15/anita/download/i386/installation/floppy/boot-com1.fs (raw, read-only) Attached to: /machine/unattached/device[20] Removable device: not locked, tray closed Cache mode: writeback ide1-cd0: [not inserted] Attached to: /machine/unattached/device[25] Removable device: not locked, tray closed sd0: [not inserted] Removable device: not locked, tray closed (qemu) cchchachanchangchangechange change fchange flchange flochange flopchange floppchange floppychange floppy0change floppy0 change floppy0 /change floppy0 /bchange floppy0 /brchange floppy0 /brachange floppy0 /bracchange floppy0 /brack -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please remove disk 2, insert disk 3, and press return...Dchange floppy0 /brackechange floppy0 /bracketchange floppy0 /bracket/change floppy0 /bracket/ichange floppy0 /bracket/i3change floppy0 /bracket/i38change floppy0 /bracket/i386change floppy0 /bracket/i386/change floppy0 /bracket/i386/t \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Please remove disk 3, insert disk 4, and press return...change floppy0 /bracket/i386/techange floppy0 /bracket/i386/teschange floppy0 /bracket/i386/testchange floppy0 /bracket/i386/test/change floppy0 /bracket/i386/test/2change floppy0 /bracket/i386/test/20change floppy0 /bracket/i386/test/201change floppy0 /bracket/i386/test/2018 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| Please remove disk 4, insert disk 5, and press return...[Dchange floppy0 /bracket/i386/test/2018.change floppy0 /bracket/i386/test/2018.0change floppy0 /bracket/i386/test/2018.06change floppy0 /bracket/i386/test/2018.06.change floppy0 /bracket/i386/test/2018.06.1change floppy0 /bracket/i386/test/2018.06.14 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+5497220\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ Please remove disk 5, insert disk 6, and press return...Dchange floppy0 /bracket/i386/test/2018.06.14.change floppy0 /bracket/i386/test/2018.06.14.0change floppy0 /bracket/i386/test/2018.06.14.06change floppy0 /bracket/i386/test/2018.06.14.06.change floppy0 /bracket/i386/test/2018.06.14.06.5 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+849788=0x1421934 [ 1.0000000] ksyms: Symbol table not found [ 1.0000000] ksyms: String table not found [ 1.0000000] ksyms: Perhaps the kernel is stripped? [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.19 (INSTALL) #0: Thu Jun 14 09:11:03 UTC 2018 [ 1.0000000] root@babylon5.netbsd.org:/tmp/bracket/build/2018.06.14.06.58.15-i386/obj/sys/arch/i386/compile/INSTALL [ 1.0000000] total memory = 127 MB [ 1.0000000] avail memory = 105 MB [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS ) [ 1.0000030] ACPI: RSDT 0x0000000007FE15FC 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACP 0x0000000007FE1458 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 1.0000030] ACPI: DSDT 0x0000000007FE0040 001418 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 1.0000030] ACPI: FACS 0x0000000007FE0000 000040 [ 1.0000030] ACPI: APIC 0x0000000007FE154C 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 1.0000030] ACPI: HPET 0x0000000007FE15C4 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 1.0000030] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.0000030] ioapic0 at mainbus0 apid 0 [ 1.0000030] cpu0 at mainbus0 apid 0 [ 1.0000030] cpu0: QEMU Virtual CPU version 2.5+, id 0x663 [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20180427 [ 1.0000030] acpi0: fixed power button present [ 1.0067857] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0098727] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0098727] pckbc2 at acpi0 (MOU, PNP0F13) (aux port): irq 12 [ 1.0098727] FDC0 (PNP0700) at acpi0 not configured [ 1.0098727] LPT (PNP0400) at acpi0 not configured [ 1.0098727] COM1 (PNP0501) at acpi0 not configured [ 1.0098727] qemufwcfg0 at acpi0 (FWCF, QEMU0002): io 0x510-0x51b [ 1.0098727] apm0 at acpi0: Power Management spec V1.2 [ 1.0098727] ACPI: Enabled 2 GPEs in block 00 to 0F [ 1.0098727] pckbd0 at pckbc1 (kbd slot) [ 1.0098727] pckbc1: using irq 1 for kbd slot [ 1.0098727] wskbd0 at pckbd0 mux 1 [ 1.0098727] pms0 at pckbc1 (aux slot) [ 1.0098727] pckbc1: using irq 12 for aux slot [ 1.0098727] wsmouse0 at pms0 mux 0 [ 1.0098727] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0098727] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.0098727] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.0098727] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.0098727] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.0098727] atabus0 at piixide0 channel 0 [ 1.0098727] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.0098727] atabus1 at piixide0 channel 1 [ 1.0098727] piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x03) [ 1.0098727] piixpm0: 24-bit timer [ 1.0098727] piixpm0: interrupting at ioapic0 pin 9 [ 1.0098727] iic0 at piixpm0: I2C bus [ 1.0098727] vga1 at pci0 dev 2 function 0: vendor 1234 product 1111 (rev. 0x02) [ 1.0098727] wsdisplay0 at vga1 kbdmux 1 [ 1.0098727] drm at vga1 not configured [ 1.0098727] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.0098727] wm0: interrupting at ioapic0 pin 11 [ 1.0098727] wm0: Ethernet address 52:54:00:12:34:56 [ 1.0098727] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.0098727] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0098727] isa0 at pcib0 [ 1.0098727] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.0098727] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.0098727] com0: console [ 1.0098727] attimer0 at isa0 port 0x40-0x43 [ 1.0098727] pcppi0 at isa0 port 0x61 [ 1.0098727] midi0 at pcppi0: PC speaker [ 1.0098727] sysbeep0 at pcppi0 [ 1.0098727] isapnp0 at isa0 port 0x279 [ 1.0098727] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.0098727] attimer0: attached to pcppi0 [ 1.0098727] acpicpu0 at cpu0: ACPI CPU [ 1.1996264] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.1996264] atapibus0 at atabus0: 2 targets [ 1.2190149] cd0 at atapibus0 drive 1: cdrom removable [ 1.2388839] wd0 at atabus0 drive 0 [ 1.2388839] wd0: [ 1.2388839] wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors [ 7.2822001] atapibus1 at atabus1: 2 targets [ 7.2822001] cd1 at atapibus1 drive 0: cdrom removable [ 7.3264838] boot device: fd0 [ 15.8368267] (st0 0xe0 cyl 0) [ 15.8368267] fd0: timeoutfd0d: hard error reading fsbn 0 of 0-2 (st0 0x40 st1 0x1 st2 0x0 cyl 0 head 0 sec 1) [ 16.1170060] root on md0a dumps on md0b [ 16.1370006] root file system type: ffs [ 16.1370006] kern.module.path=/stand/i386/8.99.19/modules [ 16.1370006] clock: unknown CMOS layout [ 16.1569949] warning: no /dev/console Created tmpfs /dev (1671168 byte, 3232 inodes) [ 26.9929029] Kernel RNG "kernel" monobit test FAILURE: 9718 ones [ 26.9929029] cprng kernel: failed statistical RNG test [ 28.1541222] Kernel RNG "kernel" long run test FAILURE: Run of 26 1s found [ 28.1541222] cprng kernel: failed statistical RNG test [ 36.0879211] Kernel RNG "kernel" runs test FAILURE: too many runs of 1 1s (2706 >= 2685) [ 36.0879211] cprng kernel: failed statistical RNG test [ 36.9883989] Kernel RNG "kernel" runs test FAILURE: too many runs of 5 0s (212 >= 209) [ 36.9883989] cprng kernel: failed statistical RNG test [ 52.9570637] Kernel RNG "kernel" long run test FAILURE: Run of 26 0s found [ 52.9570637] cprng kernel: failed statistical RNG test erase ^?, werase ^W, kill ^U, intr ^C [ 56.7791395] Kernel RNG "kernel" runs test FAILURE: too few runs of 2 1s (1114 <= 1114) [ 56.7791395] cprng kernel: failed statistical RNG test NetBSD/i386 8.99.19 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: Installation messages in Englishxx b: Messages d'installation en franXais xx c: Installation auf Deutschxx d: Komunikaty instalacyjne w jezyku polskim xx e: Mensajes de instalacion en castellano xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Keyboard typexxxx>a: unchangedxx b: US-Englishxx c: UK-Englishxx d: Belgianxx e: Czechxx f: Danishxx g: Dutchxx h: Finnishxx i: Frenchxx j: Germanxx k: Greekxx <: page up, >: page down xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Thank you for using NetBSD! lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx NetBSD-8.99.19 Install Systemxxxx>a: Install NetBSD to hard diskxx b: Upgrade NetBSD on a hard diskxx c: Re-install sets or install additional sets xx d: Reboot the computerxx e: Utility menuxx f: Config menuxx x: Exit Install Systemxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things: a) Partition your disk b) Create new BSD file systems c) Load and install distribution sets d) Some initial system configuration (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.) Shall we continue?lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes On which disk do you want to install NetBSD?lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Available disksxxxx>a: wd0 (1.5G, QEMU HARDDISK)xx b: Extended partitioning xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj This disk matches the following BIOS disk: BIOS # cylinders heads sectors total sectors GB ------ --------- ----- ------- ------------- --- 0x80779 64 633145728 1 Note: since sysinst was able to uniquely match the disk you chose with a disk known to the BIOS, the values displayed above are very likely correct, and should not be changed (the values for cylinders, heads and sectors are probably 1023, 255 and 63 - this is correct). You should only change the geometry if you know the BIOS reports incorrect values. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx>a: This is the correct geometryxx b: Set the geometry by hand xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj We are now going to install NetBSD on the disk wd0. NetBSD requires a single partition in the disk's MBR partition table, this is split further by the NetBSD disklabel. NetBSD can also access file systems in other MBR partitions. If you select 'Use the entire disk' then the previous contents of the disk will be overwritten and a single MBR partition used to cover the entire disk. If you want to install more than one operating system then edit the MBR partition table and create a partition for NetBSD. A few hundred MB is enough for a basic installation, but you should allow extra for additional software and user files. Allow at least 5GB if you want to build NetBSD itself. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Which would you like to do? xxxx>a: Edit the MBR partition tablexx b: Use the entire diskxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Edit the MBR partition table>b: Use the entire disk The bootcode in the Master Boot Record does not appear to be valid. Do you want to install the NetBSD bootcode? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Yesxx b: Noxmqqqqqqqqqqqqqqqj NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1535 Megabytes. A full installation requires at least 31 Megabytes without X and at least 81 Megabytes if the X sets are included.lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Choose your installationxxxx>a: Set sizes of NetBSD partitionsxx b: Use existing partition sizes xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj You can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems. Free space will be added to the partition marked with a '+'. MBCylinders Sectors Filesystem >a: 289 (1407) 588 592704 + / b: 128261 263088 swap c: 000 /tmp (tmpfs) d: 000 /usr e: 000 /var f: 000 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 1118 MB, 12 free partitions. a: 289 (1407) 588 592704 + / >b: 128 261 263088 swap b: 128 261 263088 swap >c: 0 0 0 /tmp (tmpfs) c: 0 0 0 /tmp (tmpfs) >d: 0 0 0 /usr d: 0 0 0 /usr >e: 0 0 0 /var e: 0 0 0 /var >f: 0 0 0 /home f: 0 0 0 /home >g: Add a user defined partition g: Add a user defined partition >h: Change input units (sectors/cylinders/MB) h: Change input units (sectors/cylinders/MB) >x: Accept partition sizes. Free space 1118 MB, 12 free partitions. We now have your BSD disklabel partitions as: This is your last chance to change them. Start MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- a:0 1406 1407 FFSv2 Yes Yes / b: 1407 1535128 swap c:0 1535 1535 NetBSD partition d:0 1535 1536 Whole disk e:000 unused f: Show all unused partitions g: Change input units (sectors/cylinders/MB) >x: Partition sizes ok Please enter a name for your NetBSD disk [wd0]: Ok, we are now ready to install NetBSD on your hard disk (wd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? lqqqqqqqqqqqqqqqkx yes or no? xxxx>a: Noxx b: Yesxmqqqqqqqqqqqqqqqj a: No>b: Yes Setting up the DOS partition table ... Status: RunningCommand: disklabel -w -r -f /tmp/disktab wd0 'wd0' -------------------------------------------------------------------------------- Finished Status: RunningCommand: /sbin/newfs -V2 -O 2 -b 16384 -f 2048 /dev/rwd0a -------------------------------------------------------------------------------- /dev/rwd0a: 1407.2MB (2881872 sectors) block size 16384, fragment size 2048 using 8 cylinder groups of 175.91MB, 11258 blks, 21824 inodes. ...............................................................................Finished Would you like to install the normal set of bootblocks or serial bootblocks? Normal bootblocks use the BIOS console device as the console (usually the monitor and keyboard). Serial bootblocks use the first serial port as the console. Selected bootblock:Serial port com0 at 9600 baudlqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Bootblocks selection xxxx a: Use BIOS consolexx>b: Use serial port com0xx c: Use serial port com1 xx d: Use serial port com2 xx e: Use serial port com3 xx f: Set serial baud rate xx g: Use existing bootblocks xx x: Exitxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqj b: Use serial port com0>x: Exit Installing boot blocks on wd0.... Status: RunningCommand: /usr/sbin/installboot -o console=com0,speed=9600 /dev/rwd0a /usr/mdec/bootxx_ffsv2 -------------------------------------------------------------------------------- Finished The NetBSD distribution is broken into a collection of distribution sets. There are some basic sets that are needed by all installations and there are some other sets that are optional. You may choose to install a core set (Minimal installation), all of them (Full installation), or a custom group of sets (Custom installation). lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Select your distribution xxxx>a: Full installationxx b: Installation without X11 xx c: Minimal installation xx d: Custom installation xx x: Abandon installation xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj a: Full installation>d: Custom installation The following is the list of distribution sets that will be used. Distribution setSelected ------------------------ -------- a: Kernel (GENERIC)Yes b: Kernel modulesYes c: BaseYes d: Configuration files (/etc) Yes e: Compiler toolsNo f: GamesNo g: Manual pagesNo h: MiscellaneousNo i: Test programsNo j: Text processing toolsNo k: X11 setsNone l: Source and debug sets None >x: Install selected sets>e: Compiler tools No x: Install selected setsYes e: Compiler tools Yes >h: Miscellaneous NoYes h: Miscellaneous Yes >i: Test programs NoYes i: Test programs Yes >k: X11 sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: X11 base and clientsNo xx b: X11 programmingNo xx c: X11 configurationNo xx d: X11 fonts No xx e: X11 serversNo xx f: Select all the above setsxx g: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets k: X11 sets None >l: Source and debug sets Nonelqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx a: Kernel sourcesNo xx b: Base sourcesNo xx c: Share sourcesNo xx d: GNU sourcesNo xx e: X11 sourcesNo xx f: Debug symbolsNo xx g: X11 debug symbolsNo xx h: Select all the above setsxx i: Deselect all the above sets xx>x: Install selected setsxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj No No Yes Yestools No None sets None sets l: Source and debug sets None >x: Install selected sets Your disk is now ready for installing the kernel and the distribution sets. As noted in your INSTALL notes, you have several options. For ftp or nfs, you must be connected to a network with access to the proper machines. Sets selected 7, processed 0, Next set kern-GENERIC. lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx Install fromxxxx>a: CD-ROM / DVD / install image mediaxx b: HTTPxx c: FTPxx d: NFSxx e: Floppyxx f: Unmounted fsxx g: Local directoryxx h: Skip setxx i: Skip set groupxx j: Abandon installationxmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Enter the CDROM device to be used and directory on the CDROM where the distribution is located. Remember, the directory should contain the .tgz files. >a: Device cd0a b: Binary set directory /i386/binary/sets c: Source set directory /source/sets d: Exit x: Continue a: Device cd0a >x: Continue Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/kern-GENERIC.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA58% |********************11712 KiB 7.66 M00:01 ETA100***************| 200608.290 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/modules.tgz tar --chroot -xhepf - -------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA9% |***4096 KiB 2.36 M00:15 ETA14% |****63372 ETA25****109443.010 ETA33***42721808 ETA44****881636 ETA52***2220875 ETA60***547214 ETA5*7712271**3040013 ETA8***334442 ETA90****8208271 ETA10****| 4233090 ETA5 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/base.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[0% || 256 KiB 129.78 KiB/s 21:23 ETA32056.3317:45 ETA[0% || 1664 KiB 424.29 KiB/s 06:29 ETA06.7046 ETA[1% || 2240 KiB 378.18 KiB/s 07:15 ETA713.4020 ETA[1% || 2271 KiB 286.65 KiB/s 09:34 ETA0.9745 ETA[1% || 2271 KiB 228.86 KiB/s 11:59 ETA5.232:10 ETA[1% || 2752 KiB 230.91 KiB/s 11:50 ETA3328 KiB 275.9909:52 ETA[7% |**| 12096 KiB 897.53 KiB/s 02:52 ETA3312 KiB 915.6847 ETA[7% |**| 13312 KiB 860.04 KiB/s 02:58 ETA04.893:10 ETA[7% |**| 13312 KiB 761.58 KiB/s 03:21 ETA18.0733 ETA[ 7% |**| 13312 KiB 683.40 KiB/s 03:44 ETA48.11- stalled -[ 7% |**| 13312 KiB 619.60 KiB/s - stalled -876 KiB 593.42 04:18 ETA[ 8% |**| 13407 KiB 570.75 KiB/s 04:28 ETA46.3240 ETA[ 8% |** | 13407 KiB 525.93 KiB/s 04:51 ETA 05.705:03 ETA4848 KiB 539.974:41 ETA[ 11% |***| 18432 KiB 650.53 KiB/s 03:48 ETA21.1458 ETA[ 12% |****| 20864 KiB 688.73 KiB/s 03:31 ETA15680.073 ETA[ 12% |****| 21568 KiB 667.85 KiB/s 03:37 ETA39.747 ETA[ 12% |****| 21568 KiB 630.50 KiB/s 03:50 ETA02.824:01 ETA328431.173:48 ETA7% |*****8928 KiB 772.02:58 ETA[ 19% |******| 31808 KiB 825.53 KiB/s 02:43 ETA05.257 ETA[ 19% |******| 31808 KiB 784.96 KiB/s 02:52 ETA66.426 ETA[ 19% |******| 31808 KiB 747.85 KiB/s 03:00 ETA31.674 ETA[ 19% |******| 31808 KiB 714.55 KiB/s - stalled -699.3820*4880 KiB 750.46 02:55 ETA[ 22% |*******| 37184 KiB 783.79 KiB/s 02:45 ETA[ 22% |*******| 37184 KiB 765.39 KiB/s 02:49 ETA52.3752 ETA[ 22% |*******| 37184 KiB 735.11 KiB/s 02:56 ETA23.099 ETA[ 22% |*******| 37184 KiB 707.00 KiB/s - stalled -696.79[ [ 151.5768996] cd0a: error reading fsbn 49528 of 49528-49655 (cd0 bn 49528; cn 4 22% |*******| 37184 KiB 681.33 KiB/s - stalled -70.76[ 22% |*******| 37184 KiB 657.24 KiB/s - stalled -47.39[ 22% |*******| 37184 KiB 636.59 KiB/s - stalled -23.879529.25 03:24 ETA[ 24% |********| 40320 KiB 653.56 KiB/s 03:13 ETA[ 24% |******** | 40320 KiB 646.95 KiB/s 03:15 ETA 33.329 ETA[ 24% |******** | 40320 KiB 627.38 KiB/s 03:21 ETA 13.236 ETA08.57 ETA[ 26% |*********| 43776 KiB 646.31 KiB/s 03:10 ETA1.02 ETA[ 26% |*********| 43776 KiB 627.68 KiB/s 03:16 ETA2.947 ETA[ 26% |*********| 43776 KiB 607.12 KiB/s 03:22 ETA4.943 ETA[ 28% |*********| 46976 KiB 634.42 KiB/s 03:08 ETA0.2510 ETA31*52992 KiB 700.32:42 ETA3*6448 KiB 736.8629 ETA6*602876.0917 ETA8*3680 KiB 809.9507 ETA[ 40% |**************| 67584 KiB 846.78 KiB/s 01:57 ETA37.968 ETA[ 40% |**************| 67584 KiB 826.07 KiB/s 02:00 ETA17.61 ETA[ 40% |**************| 67584 KiB 806.35 KiB/s 02:03 ETA798.304 ETA[ 40% |**************| 67584 KiB 787.78 KiB/s - stalled -79270336 KiB 802.70 02:00 ETA[ 45% |***************| 75264 KiB 848.24 KiB/s 01:47 ETA6672 KiB 854.495 ETA[ 45% |***************| 76672 KiB 845.25 KiB/s 01:46 ETA36.217 ETA[ 45% |***************| 76672 KiB 826.47 KiB/s 01:49 ETA18.3550 ETA[ 45% |***************| 76672 KiB 808.94 KiB/s - stalled -2.00[ 47% |****************| 79296 KiB 818.73 KiB/s 01:46 ETA615.55[ 47% |****************| 79616 KiB 805.66 KiB/s 01:48 ETA7999 ETA9*82752 KiB 821.152 ETA[ 51% |*****************| 86208 KiB 848.05 KiB/s 01:35 ETA38.396 ETA3*8576 KiB 855.101 ETA[ 55% |*******************| 93376 KiB 891.17 KiB/s 01:22 ETA64272981 ETA[ 56% |*******************| 94272 KiB 882.87 KiB/s 01:22 ETA75.9876064 KiB 883.270 ETA9*9136 KiB 905.9014 ETA[ 63% |**********************| 102 MiB 948.04 KiB/s 01:05 ETA2.60[ 63% |**********************| 102 MiB 931.24 KiB/s 01:06 ETA26.15[ 63% |**********************| 102 MiB 915.26 KiB/s 01:07 ETA0.1156 MiB 930.762 ETA7*9 MiB 954.280:57 ETA[ 71% |************************| 115 MiB 0.97 MiB/s 00:48 ETA76 ETA2*998.11 K[ 72% |*************************| 118 MiB 996.24 KiB/s 00:45 ETA0.7[ 72% |*************************| 118 MiB 980.82 KiB/s 00:46 ETA74.83[ 73% |*************************| 119 MiB 976.37 KiB/s 00:45 ETA200.245*3 MiB 991.620 ETA[ 78% |***************************| 127 MiB 0.99 MiB/s 00:35 ETA880*311.001 ETA[ 82% |**************************** | 135 MiB 1.02 MiB/s 00:27 ETA1[ 82% |**************************** | 135 MiB 1.00 MiB/s 00:27 ETA4*824 ETA[ 86% |****************************** | 141 MiB 1.03 MiB/s 00:20 ETA[ 88% |****************************** | 144 MiB 1.04 MiB/s 00:17 ETA9*56 ETA[ 90% |******************************* | 147 MiB 1.04 MiB/s 00:15 ETA84 ETA[ 91% |******************************* | 148 MiB 1.03 MiB/s 00:14 ETA3 ETA2*502 ETA11 ETA32409 ETA438 ETA3[ 99% |********************************** | 161 MiB 1.07 MiB/s 00:01 ETA20 ETA6100*5Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/etc.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA100% |***********************************| 4210 KiB 2.16 M00:00 ETA1.953 Finished Status: RunningCommand: progress -zf /mnt2//i386/binary/sets/comp.tgz tar --chroot -xhepf --------------------------------------------------------------------------------- 0% || 00.00 KiB/s --:-- ETA[2% || 7488 KiB 4.40 MiB/s 01:13 ETA3.0844 ETA101122.929 ETA[4% |*| 14656 KiB 3.17 MiB/s 01:39 ETA2.592:01 ETA[4% |*| 14656 KiB 2.20 MiB/s 02:23 ETA1.9145 ETA[5% |*| 16960 KiB 1.96 MiB/s 02:39 ETA723:01 ETA6% |**20352942:39 ETA[8% |**| 28544 KiB 2.34 MiB/s 02:08 ETA80029 ETA[8% |**| 29888 KiB 2.10 MiB/s 02:22 ETA930065 ETA[9% |***| 32128 KiB 2.00 MiB/s 02:29 ETA30241.9730 ETA[9% |***| 33280 KiB 1.83 MiB/s 02:42 ETA777 ETA4726559 ETA10468877 ETA189127546 ETA95538 ETA[12% |****| 43072 KiB 1.78 MiB/s 02:41 ETA3409662 ETA[ 13% |**** | 44125 KiB 1.68 MiB/s 02:49 ETA 544454 ETA672589 ETA6248384606 ETA966587 ETA5% |*****52288621 ETA[ 17% |*****| 58560 KiB 1.76 MiB/s 02:34 ETA8*6163280 ETA[ 18% |******| 62656 KiB 1.78 MiB/s 02:30 ETA94897[ 19% |******| 64923 KiB 1.74 MiB/s 02:32 ETA643223 ETA[ 20% |*******| 67968 KiB 1.72 MiB/s 02:32 ETA8416686 ETA[ 20% |*******| 68416 KiB 1.65 MiB/s 02:38 ETA044 ETA608585 ETA[ 21% |*******| 72128 KiB 1.58 MiB/s 02:43 ETA65 ETA[ 22% |*******| 75136 KiB 1.58 MiB/s 02:41 ETA63 ETA[ 22% |*******| 75136 KiB 1.52 MiB/s 02:48 ETA[ 22% |*******| 75136 KiB 1.49 MiB/s 02:51 ETA65 ETA[ 22% |*******| 75136 KiB 1.43 MiB/s 02:58 ETA0- stalled -641 03:01 ETA[ 22% |*******| 76992 KiB 1.38 MiB/s 03:03 ETA66 ETA[ 22% |*******| 76992 KiB 1.33 MiB/s 03:10 ETA04 ETA3*833620 ETA5860142:52 ETA6*90432744 ETA[ 27% |*********| 93632 KiB 1.49 MiB/s 02:39 ETA741 ETA[ 27% |*********| 93632 KiB 1.44 MiB/s 02:44 ETA26 ETA[ 27% |*********| 93632 KiB 1.40 MiB/s 02:49 ETA3852 ETA[ 28% |*********| 97024 KiB 1.41 MiB/s 02:46 ETA389 ETA9* 98 M422 ETA[ 30% |**********| 101 MiB 1.44 MiB/s 02:37 ETA238 ETA[ 31% |**********| 104 MiB 1.44 MiB/s 02:35 ETA27 ETA[ 31% |**********| 104 MiB 1.40 MiB/s 02:39 ETA3941 ETA3*94333 ETA414825 ETA6*95217 ETA[ 37% |************| 123 MiB 1.55 MiB/s 02:12 ETA48*7609 ETA93194 ETA41*7651:55 ETA3*437049 ETA4734 ETA55052 ETA7*5937 ETA860822 ETA[ 49% |*****************| 164 MiB 1.84 MiB/s 01:29 ETA230 ETA506328 ETA17046 ETA3*582 ETA489019 ETA5*8226 ETA[ 57% |*******************| 188 MiB 1.96 MiB/s 01:12 ETA951 ETA[ 57% |*******************| 189 MiB 1.93 MiB/s 01:12 ETA13 ETA[ 57% |*******************| 189 MiB 1.90 MiB/s 01:13 ETA874 ETA8*9183 ETA[ 60% |*********************| 197 MiB 1.91 MiB/s 01:08 ETA80[ 61% |*********************| 202 MiB 1.93 MiB/s 01:05 ETA316 ETA[ 62% |*********************| 204 MiB 1.91 MiB/s 01:05 ETA589[ 62% |*********************| 205 MiB 1.88 MiB/s 01:05 ETA66 ETA[ 62% |*********************| 205 MiB 1.85 MiB/s 01:07 ETA376 ETA4*1372 ETA[ 66% |***********************| 218 MiB 1.89 MiB/s 00:58 ETA79 ETA[ 67% |***********************| 222 MiB 1.90 MiB/s 00:56 ETA88[ 67% |***********************| 222 MiB 1.86 MiB/s 00:57 ETA5[ 68% |***********************| 226 MiB 1.87 MiB/s 00:55 ETA5[ 68% |***********************| 226 MiB 1.83 MiB/s 00:56 ETA2[ 68% |***********************| 226 MiB 1.81 MiB/s 00:57 ETA79- stalled -9*980 00:55 ETA713640 ETA4*49043 ETA[ 75% |**************************| 250 MiB 1.92 MiB/s 00:41 ETA610[ 76% |**************************| 251 MiB 1.90 MiB/s 00:41 ETA87280 ETA[ 78% |***************************| 258 MiB 1.89 MiB/s 00:37 ETA88 ETA[ 78% |***************************| 258 MiB 1.86 MiB/s 00:38 ETA5[ 79% |***************************| 263 MiB 1.87 MiB/s 00:35 ETA6[ 81% |**************************** | 267 MiB 1.87 MiB/s 00:33 ETA92 ETA[ 83% |***************************** | 275 MiB 1.89 MiB/s 00:28 ETA79 ETA[ 83% |***************************** | 275 MiB 1.86 MiB/s 00:29 ETA5[ 83% |***************************** | 275 MiB 1.84 MiB/s 00:29 ETA34847 ETA[ 86% |****************************** | 284 MiB 1.86 MiB/s 00:24 ETA673 ETA[ 86% |****************************** | 286 MiB 1.85 MiB/s 00:23 ETA477389150 ETA219 ETA9*34[ 89% |******************************* | 294 MiB 1.83 MiB/s 00:19 ETA58 ETA[ 89% |******************************* | 295 MiB 1.82 MiB/s 00:18 ETA61[ 89% |******************************* | 296 MiB 1.80 MiB/s 00:18 ETA9077987 ETA87695130046 ETA3[ 91% |******************************* | 301 MiB 1.72 MiB/s 00:16 ETA1[ 91% |******************************* | 301 MiB 1.71 MiB/s 00:16 ETA20695 ETA32*8764545324 ETA1[ 92% |******************************** | 306 MiB 1.60 MiB/s 00:14 ETA[ 92% |******************************** | 306 MiB 1.59 MiB/s 00:14 ETA8[ 93% |******************************** | 306 MiB 1.57 MiB/s 00:14 ETA76[ 93% |******************************** | 309 MiB 1.56 MiB/s 00:13 ETA2 ETA4105[ 95% |********************************* | 314 MiB 1.55 MiB/s 00:10 ETA[ 96% |********************************* | 316 MiB 1.55 MiB/s 00:08 ETA747 ETA8396 ETA272015 ETA10249874 ETA[ 97% |********************************* | 322 MiB 1.47 MiB/s 00:04 ETA6358*[ 98% |********************************** | 323 MiB 1.44 MiB/s 00:04 ETA3423 ETA1503982 ETA76659471 ETA[ 99% |********************************** | 328 MiB 1.33 MiB/s 00:01 ETA[ 99% |********************************** | 328 MiB 1.32 MiB/s 00:01 ETA[ 99% |********************************** | 328 MiB 1.31 MiB/s 00:01 ETA[ 99% |********************************** | 328 MiB 1.30 MiB/s - stalled -[ [ 509.9557955] cd0a: error reading fsbn 342968 of 342968-342983 (cd0 bn 342968; gzip: failed to read stdin: Device busy tar: End of archive volume 1 reachedtar: Unexpected EOF on archive file 99% |********************************** | 328 MiB 1.29 MiB/s - stalled - Command failedHit enter to continue There was an error in extracting the file /mnt2//i386/binary/sets/comp.tgz. That means some files were not extracted correctly and your system will not be complete. Continue extracting sets?lqqqqqqqqqqqqqqqqqqqqqqqkx>Hit enter to continuexmqqqqqqqqqqqqqqqqqqqqqqqjTraceback (most recent call last): File "/usr/pkg/bin/anita", line 150, in status = main() File "/usr/pkg/bin/anita", line 130, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1623, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1351, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 88, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 321, in expect timeout, searchwindowsize, async) File "/usr/pkg/lib/python2.7/site-packages/pexpect/spawnbase.py", line 345, in expect_list return exp.expect_loop(timeout) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 107, in expect_loop return self.timeout(e) File "/usr/pkg/lib/python2.7/site-packages/pexpect/expect.py", line 70, in timeout raise TIMEOUT(msg) pexpect.exceptions.TIMEOUT: Timeout exceeded. command: /usr/pkg/bin/qemu-system-i386 args: ['/usr/pkg/bin/qemu-system-i386', '-m', '128', '-drive', 'file=/bracket/i386/test/2018.06.14.06.58.15/anita/wd0.img,format=raw,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/i386/test/2018.06.14.06.58.15/anita/install_tmp.iso,format=raw,media=cdrom,readonly=on', '-drive', 'file=/bracket/i386/test/2018.06.14.06.58.15/anita/download/i386/installation/floppy/boot-com1.fs,format=raw,if=floppy,readonly=on', '-boot', 'a', '-tb-size', '128'] buffer (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' before (last 100 chars): '\x1b[C\x1b[27m\x1b(0\x00x\x1b(B\x00\x00\x1b[13;28H\x1b(0\x00mqqqqqqqqqqqqqqqqqqqqqqqj\x1b(B\x00\x00\x1b[12;29H\x1b[m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 5063 child_fd: 14 closed: False timeout: 600 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 30.0 delayafterterminate: 30.0 searcher: searcher_re: 0: re.compile("(a: Progress bar)|(a: CD-ROM)|(([cx]): Continue)|(Hit enter to continue)|(b: Use serial port com0)|(Please choose the timezone)|(essential things)|(Configure the additional items)|(Multiple CDs found)|(The following are the http site)|(Is the network information you entered accurate)|(I have found the following network interfaces)|(Which network device would you like to use)|(No allows you to continue anyway)|(Can't connect to)|(/sbin/newfs)|(Do you want to install the NetBSD bootcode)|(Do you want to update the bootcode in the Master Boot Record to the latest)|(([a-z]): Custom installation)|(a: This is the correct geometry)|(a: Use one of these disks)|(a: Set sizes of NetBSD partitions)|(Sysinst could not automatically determine the BIOS geometry of the disk)") 11434.26 real 25.66 user 8.58 sys