Downloading file:///bracket/sparc/test/2012.06.22.22.54.26/release/iso/NetBSD-6.99.8-sparc.iso... Creating disk image... HJConfiguration device id QEMU version 1 machine id 32 UUID: 00000000-0000-0000-0000-000000000000 CPUs: 1 x FMI,MB86904 Welcome to OpenBIOS v1.0 built on Jul 13 2010 17:53 Type 'help' for detailed information [sparc] Booting file 'cdrom' with parameters '' Trying cdrom (/iommu/sbus/espdma/esp/sd@2,0) Not a bootable ELF image Not a Linux kernel image Not a bootable a.out image Trying cdrom:d (/iommu/sbus/espdma/esp/sd@2,0:d) Not a bootable ELF image Not a Linux kernel image Loading a.out image... Loaded 65536 bytes entry point is 0x4000 Jumping to entry point 00004000 for type 00000005... >> NetBSD/sparc Secondary Boot, Revision 1.15 (Sat Jun 23 02:46:50 UTC 2012) Booting netbsd 3043776+95328=0x2fea30 OBP version 3, revision 2.25 (plugin rev 2) initialized boothowt from bootloader: 0 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.8 (INSTALL) #0: Sat Jun 23 02:55:25 UTC 2012 bracket@babylon5.NetBSD.org:/tmp/bracket/build/2012.06.22.22.54.26-sparc/obj/sys/arch/sparc/compile/INSTALL total memory = 31840 KB avail memory = 27944 KB bootpath: /iommu0/sbus0/espdma0/esp0/sd@2,0:d mainbus0 (root): SUNW,SPARCstation-5: hostid 80000000 cpu0 at mainbus0: MB86907 @ 170 MHz, L64804 FPU cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled obio0 at mainbus0 clock0 at obio0 slot 0 offset 0x200000: mk48t08 timer0 at obio0 slot 0 offset 0xd00000: delay constant 69, frequency = 1000000 Hz zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 zstty0 at zs0 channel 0 (console i/o) zstty1 at zs0 channel 1 zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6 zstty2 at zs1 channel 0 zstty3 at zs1 channel 1 slavioconfig at obio0 slot 0 offset 0x800000 not configured fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached auxreg0 at obio0 slot 0 offset 0x900000 power0 at obio0 slot 0 offset 0x910000 level 2 iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB sbus0 at iommu0: clock = 21.250 MHz genfb0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) genfb0: 1024 x 768 at 8 bit genfb0: framebuffer at offset 0x0 initialized boothowt from bootloader: 0 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 6.99.8 (INSTALL) #0: Sat Jun 23 02:55:25 UTC 2012 bracket@babylon5.NetBSD.org:/tmp/bracket/build/2012.06.22.22.54.26-sparc/obj/sys/arch/sparc/compile/INSTALL total memory = 31840 KB avail memory = 27944 KB timecounter: Timecounters tick every 10.000 msec bootpath: /iommu0/sbus0/espdma0/esp0/sd@2,0:d mainbus0 (root): SUNW,SPARCstation-5: hostid 80000000 cpu0 at mainbus0: MB86907 @ 170 MHz, L64804 FPU cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled obio0 at mainbus0 clock0 at obio0 slot 0 offset 0x200000: mk48t08 timer0 at obio0 slot 0 offset 0xd00000: delay constant 69, frequency = 1000000 Hz timecounter: Timecounter "timer-counter" frequency 1000000 Hz quality 100 zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 zstty0 at zs0 channel 0 (console i/o) zstty1 at zs0 channel 1 zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6 zstty2 at zs1 channel 0 zstty3 at zs1 channel 1 slavioconfig at obio0 slot 0 offset 0x800000 not configured fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached auxreg0 at obio0 slot 0 offset 0x900000 power0 at obio0 slot 0 offset 0x910000 level 2 iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB sbus0 at iommu0: clock = 21.250 MHz genfb0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) genfb0: 1024 x 768 at 8 bit genfb0: framebuffer at offset 0x0 genfb0: framebuffer at 0xfe025000, size 1024x768, depth 8, stride 1024 wsdisplay1 at genfb0 kbdmux 1 dma0 at sbus0 slot 5 offset 0x8400000: DMA rev 2 esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7 scsibus0 at esp0: 8 targets, 8 luns per target ledma0 at sbus0 slot 5 offset 0x8400010: DMA rev 2 le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 52:54:00:12:34:56 le0: 8 receive buffers, 2 transmit buffers SUNW,CS4231 at sbus0 slot 4 offset 0xc000000 level 5 (ipl 9) not configured power-management at sbus0 slot 4 offset 0xa000000 not configured scsibus0: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: disk fixed sd0: fabricating a geometry sd0: 768 MB, 768 cyl, 64 head, 32 sec, 512 bytes/sect x 1572864 sectors sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0459f88 (flags 0x1, dleft 0, stat 0)], sd0(esp0:0:0:0): esp0: timed out [ecb 0xf0459f88 (flags 0x41, dleft 0, stat 0)], AGAIN sd0: async, 8-bit transfers cd0 at scsibus0 target 2 lun 0: cdrom removable cd0(esp0:0:2:0): esp0: timed out [ecb 0xf0459f88 (flags 0x1, dleft 0, stat 0)], cd0(esp0:0:2:0): esp0: timed out [ecb 0xf0459f88 (flags 0x41, dleft 0, stat 0)], AGAIN cd0: async, 8-bit transfers root on md0a dumps on md0b root on md0a dumps on md0b root file system type: ffs pid 0 is killed: exceeded RLIMIT_CPU WARNING: negative runtime; monotonic clock has gone backwards Welcome to the NetBSD/sparc microroot setup utility. We've just completed the first stage of a two-stage procedure to load a fully functional NetBSD installation environment on your machine. In the second stage which is to follow now, a set of additional installation utilities must be load from your NetBSD/sparc installation medium. This procedure supports one of the following media: 1) cdrom 2) tape 3) floppy Installation medium to load the additional utilities from: cdrom cdrom The installation utilities are located on the ISO CD9660 filesystem on the NetBSD/sparc CD-ROM. We need to mount the filesystem from the CD-ROM device which you can specify below. Note: after the installation utilities are extracted this filesystem will be unmounted again. CD-ROM device to use [/dev/cd0a]: Path to instfs.tgz [/cdrom/sparc/installation/bootfs/instfs.tgz] pid 0 is killed: exceeded RLIMIT_CPU pid 0 is killed: exceeded RLIMIT_CPU pid 0 is killed: exceeded RLIMIT_CPU erase ^H, werase ^W, kill ^U, intr ^C Terminal type? [vt100] xterm xterm pidG07is5killed:4exceeded7RLIMIT_CPU Erase is backspace. This installer now uses the new `sysinst' installer tool by default. To use the old install or upgrade shell scripts instead, enter the options (OI) for Old Install or (OU) for Old Upgrade. The script-based installers may be removed in a future release. (I)nstall/Upgrade, (H)alt or (S)hell? I I [1] Segmentation fault (core dumped) /sysinst pid 0 is killed: exceeded RLIMIT_CPU Back in microroot; halting machine... halted by root pid 0 is killed: exceeded RLIMIT_CPU pid 0 is killed: exceeded RLIMIT_CPU pid 0 is killed: exceeded RLIMIT_CPU pid 0 is killed: exceeded RLIMIT_CPU pid 0 is killed: exceeded RLIMIT_CPU pid 0 is killed: exceeded RLIMIT_CPU pid 0 is killed: exceeded RLIMIT_CPU syncing disks... done unmounting file systems... done halted halt, power off Traceback (most recent call last): File "/usr/pkg/bin/anita", line 106, in status = main() File "/usr/pkg/bin/anita", line 88, in main a.install() File "/usr/pkg/lib/python2.6/site-packages/anita.py", line 1074, in install self._install() File "/usr/pkg/lib/python2.6/site-packages/anita.py", line 751, in _install child.expect("a: Installation messages in English") File "/usr/pkg/lib/python2.6/site-packages/pexpect.py", line 1311, in expect return self.expect_list(compiled_pattern_list, timeout, searchwindowsize) File "/usr/pkg/lib/python2.6/site-packages/pexpect.py", line 1325, in expect_list return self.expect_loop(searcher_re(pattern_list), timeout, searchwindowsize) File "/usr/pkg/lib/python2.6/site-packages/pexpect.py", line 1396, in expect_loop raise EOF (str(e) + '\n' + str(self)) pexpect.EOF: End Of File (EOF) in read_nonblocking(). Empty string style platform. version: 2.3 ($Revision: 399 $) command: /usr/pkg/bin/qemu-system-sparc args: ['/usr/pkg/bin/qemu-system-sparc', '-m', '32', '-drive', 'file=/bracket/sparc/test/2012.06.22.22.54.26/anita/wd0.img,index=0,media=disk,snapshot=off', '-nographic', '-cdrom', '/bracket/sparc/test/2012.06.22.22.54.26/anita/download/sparc/NetBSD-6.99.8-sparc.iso', '-boot', 'd'] searcher: searcher_re: 0: re.compile("a: Installation messages in English") buffer (last 100 chars): before (last 100 chars): LIMIT_CPU syncing disks... done unmounting file systems... done halted halt, power off after: match: None match_index: None exitstatus: 0 flag_eof: True pid: 19659 child_fd: 7 closed: False timeout: 300 delimiter: logfile: ', mode 'w' at 0x7f7ffd12c150> logfile_read: None logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 1.0 delayafterterminate: 1.0 135.05 real 62.08 user 29.24 sys