This is anita version 1.38 Downloading file:///bracket/sparc/test/2016.02.17.01.23.32/release/images/NetBSD-7.99.26-sparc.iso... OK Creating hard disk image... done. qemu-system-sparc -m \ 64 \ -drive \ file=/bracket/sparc/test/2016.02.17.01.23.32/anita/wd0.img,media=disk,snapshot=off \ -nographic \ -drive \ file=/bracket/sparc/test/2016.02.17.01.23.32/anita/download/sparc/NetBSD-7.99.26-sparc.iso,media=cdrom \ -boot \ d HJConfiguration device id QEMU version 1 machine id 32 CPUs: 1 x FMI,MB86904 UUID: 00000000-0000-0000-0000-000000000000 Welcome to OpenBIOS v1.0 built on Jul 20 2011 21:16 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 65536 bytes entry point is 0x4000 bootpath: /iommu/sbus/espdma/esp/sd@1,0:d Jumping to entry point 00004000 for type 00000005... switching to new context: >> NetBSD/sparc Secondary Boot, Revision 1.15 (Wed Feb 17 06:49:57 UTC 2016) Booting netbsd 3296320+95512=0x33c644 OBP version 3, revision 2.25 (plugin rev 2) Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.26 (INSTALL) #0: Wed Feb 17 07:01:45 UTC 2016 root@babylon5.netbsd.org:/tmp/bracket/build/2016.02.17.01.23.32-sparc/obj/sys/arch/sparc/compile/INSTALL total memory = 49152 KB avail memory = 44688 KB bootpath: /iommu0/sbus0/espdma0/esp0/sd@1,0:d mainbus0 (root): SUNW,SPARCstation-5: hostid 80000000 cpu0 at mainbus0: MB86907 @ 170 MHz, L64804 FPU cpu0: 16K instruction (32 b/l), 8K data (16 b/l), 512K external (32 b/l): cache enabled obio0 at mainbus0 clock0 at obio0 slot 0 offset 0x200000: mk48t08 timer0 at obio0 slot 0 offset 0xd00000: delay constant 87, frequency = 1000000 Hz timer: limit 0 shift 10 mask 1fffff zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6 zstty0 at zs0 channel 0 (console i/o) zstty1 at zs0 channel 1 zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6 zstty2 at zs1 channel 0 zstty3 at zs1 channel 1 fdc0 at obio0 slot 0 offset 0x400000 level 11: no drives attached auxreg0 at obio0 slot 0 offset 0x900000 power0 at obio0 slot 0 offset 0x910000 level 2 slavioconfig at obio0 slot 0 offset 0x800000 not configured iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB sbus0 at iommu0: clock = 21.250 MHz tcx0 at sbus0 slot 3 offset 0x800000 level 5 (ipl 9) (8-bit only TCX) tcx0: SUNW,tcx, 1024 x 768 tcx0: STIP register too small (0x1) dma0 at sbus0 slot 5 offset 0x8400000: DMA rev 2 esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7 scsibus0 at esp0: 8 targets, 8 luns per target ledma0 at sbus0 slot 5 offset 0x8400010: DMA rev 2 le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 52:54:00:12:34:56 le0: 8 receive buffers, 2 transmit buffers SUNW,CS4231 at sbus0 slot 4 offset 0xc000000 level 5 (ipl 9) not configured power-management at sbus0 slot 4 offset 0xa000000 not configured scsibus0: waiting 2 seconds for devices to settle... sd0 at scsibus0 target 0 lun 0: disk fixed sd0: fabricating a geometry sd0: 1024 MB, 1024 cyl, 64 head, 32 sec, 512 bytes/sect x 2097152 sectors sd0(esp0:0:0:0): esp0: timed out [ecb 0xf04fbf88 (flags 0x1, dleft 0, stat 0)], sd0(esp0:0:0:0): esp0: timed out [ecb 0xf04fbf88 (flags 0x41, dleft 0, stat 0)], AGAIN sd0: async, 8-bit transfers cd0 at scsibus0 target 1 lun 0: cdrom removable cd0(esp0:0:1:0): esp0: timed out [ecb 0xf04fbf88 (flags 0x1, dleft 0, stat 0)], cd0(esp0:0:1:0): esp0: timed out [ecb 0xf04fbf88 (flags 0x41, dleft 0, stat 0)], AGAIN cd0: async, 8-bit transfers cd1 at scsibus0 target 2 lun 0: cdrom removable cd1(esp0:0:2:0): esp0: timed out [ecb 0xf04fbf88 (flags 0x1, dleft 0, stat 0)], cd1(esp0:0:2:0): esp0: timed out [ecb 0xf04fbf88 (flags 0x41, dleft 0, stat 0)], AGAIN cd1: async, 8-bit transfers root on md0a dumps on md0b root file system type: ffs kern.module.path=/stand/sparc/7.99.26/modules Welcome to the NetBSD/sparc microroot setup utility. We've just completed the first stage of a two-stage procedure to load a fully functional NetBSD installation environment on your machine. In the second stage which is to follow now, a set of additional installation utilities must be load from your NetBSD/sparc installation medium. This procedure supports one of the following media: 1) cdrom 2) tape 3) floppy Installation medium to load the additional utilities from: cdrom cdrom The installation utilities are located on the ISO CD9660 filesystem on the NetBSD/sparc CD-ROM. We need to mount the filesystem from the CD-ROM device which you can specify below. Note: after the installation utilities are extracted this filesystem will be unmounted again. CD-ROM device to use [/dev/cd0a]: Path to instfs.tgz [/cdrom/sparc/installation/bootfs/instfs.tgz] cd0(esp0:0:1:0): command aborted, retrying, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 cd0(esp0:0:1:0): command aborted, retrying, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 cd0(esp0:0:1:0): command aborted, retrying, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 cd0(esp0:0:1:0): command aborted, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 cd0(esp0:0:1:0): command aborted, cmd 0x35, info 0x0, data = 00 00 00 00 00 06 00 erase ^H, werase ^W, kill ^U, intr ^C Terminal type? [vt100] xterm xterm Erase7is5backspace.57G65G73G This installer now uses the new `sysinst' installer tool by default. To use the old install or upgrade shell scripts instead, enter the options (OI) for Old Install or (OU) for Old Upgrade. The script-based installers may be removed in a future release. (I)nstall/Upgrade, (H)alt or (S)hell? I I ?1049h?12l?25hH2J39;49m?1h39;49mH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49m C37m44m 3;2H 4;2H 5;2H 6;2H 7;2H 8;2H 9;2H 10;2H 11;2H 12;2H 13;2H 14;2H 15;2H 16;2H 17;2H 18;2H 19;2H 20;2H 21;2H 22;2H 23;2H 2;2H39;49mH37m44m 2;1H 3;1H 4;1H 5;1H 6;1H 7;1H 8;1H 9;1H 10;1H 11;1H 12;1H 13;1H 14;1H 15;1H 16;1H 17;1H 18;1H 19;1H 20;1H 21;1H 22;1H 23;1H 24;1H39;49m37m44mKH39;49m C37m44mNetBSD/sparc 7.99.26 This menu-driven tool is designed to help you install NetBSD to a hard disk, or upgrade an existing NetBSD system, with a minimum of work. In the following menus type the reference letter (a, b, c, ...) to select an item, or type CTRL+N/CTRL+P to select the next/previous item. The arrow keys and Page-up/Page-down may also work. Activate the current selection from the menu by typing the enter key. 39;49m13;17H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB14;17H0xB>7ma: Installation messages in English14;63H27m0xB15;17H0xB b: Messages d'installation en franais 0xB16;17H0xB c: Installation auf Deutsch16; 63H0xB17;17H0xB d: Komunikaty instalacyjne w jezyku polskim 0xB18;17H0xB e: Mensajes de instalacion en castellano 0xB19;17H0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjB14;18H39;49m13;17H39;49m37m44mK14;17H39;49m37m44mK15;17H39;49m37m44mK16;17H39;49m37m44mK17;17H39;49m37m44mK18;17H39;49m37m44mK19;17H39;49m37m44mK10;2H39;49m C39;49m37m44mIf you booted from a floppy, you may now remove the disk. 39;49m37m44mThank you for using NetBSD! 39;49m13;16H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB14;16H0xB NetBSD-7.99.26 Install System14;64H0xB15;16H0xB15;64H0xB16;16H0xB>7ma: Install NetBSD to hard disk16;64H27m0xB17;16H0xB b: Upgrade NetBSD on a hard disk17;64H0xB18;16H0xB c: Re-install sets or install additional sets 0xB19;16H0xB d: Reboot the computer19;64H0xB20;16H0xB e: Utility menu20;64H0xB21;16H0xB f: Config menu21;64H0xB22;16H0xB x: Exit Install System22;64H0xB23;16H0mqqqqqqqqqqqqqqqqqqqqqq qqqqqqqqqqqqqqqqqqqqqqqqqjB16;17H39;49mH C37m44mYou have chosen to install NetBSD on your hard disk. This will change information on your hard disk. You should have made a full backup before this procedure! This procedure will do the following things:39;49m37m44mK a) Partition your disk39;49m37m44mK b) Create new BSD file systems39;49m37m44mK c) Load and install distribution sets39;49m37m44mK d) Some initial system configuration39;49m37m44mK 39;49m37m44mK (After you enter the partition information but before your disk is changed, you will have the opportunity to quit this procedure.)39;49m37m44mK 39;49m37m44mK Shall we continue?39;49m37m44mK14;16H39;49m37m44mK15;16H39;49m37m44mK16;16H39;49m37m44mK17;16H39;49m37m44mK18;16H39;49m37m44mK19;16H39;49m37m44mK20;16H39;49m37m44mK21;16H39;49m37m44mK22;16H39;49m37m44mK23;16H39;49m37m44mK14;2H39;49m14;32H37m44m0lqqqqqqqqqqqqqqqkB15;32H0xB yes or no? 0xB16;32H0xB16;48H0xB17;32H0xB>7ma: No17;48H27m0xB18;32H0xB b: Yes18;48H0xB19;32H0mqqqqqqqqqqqqqqqjB17;33H39;49mb 37m44m a: No18;33H>7mb: Yes18;33H27m39;49msd0: fabricating a geometry sd0: no disk label H37m44m 2;1H39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 10;1H39;49m37m44mK 39;49m37m44mK 13;1H39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 21;1H 22;1H 23;1H 24;1H39;49m37m44mKH39;49m C37m44mOn which disk do you want to install NetBSD?39;49m5;22H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB6;22H0xB Available disks6;58H0xB7;22H0xB7;58H0xB8;22H0xB>7ma: sd0 (1.0G, QEMU QEMU HARDDISK)C27m0xB9;22H0xB b: Extended para titioning9;58H0xB10;22H0xB x: Exit10;58H0xB11;22H0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjB8;23H39;49m39;49mH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49m C37m44mNetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk into multiple BSD partitions. You must now set up your BSD disklabel. You can use a simple editor to set the sizes of the NetBSD partitions, or keep the existing partition sizes and contents. You will then be given the opportunity to change any of the disklabel fields. The NetBSD part of your disk is 1024 Megabytes. A full installation requires at least 260 Megabytes without X and at least 295 Megabytes if the X sets are included. 39;49m39;49m13;22H37m44m0lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkB14;22H0xB Choose your installation14;58H0xB15;22H0xB15;58H0xB16;22H0xB>7ma: Set sizes of NetBSD partitionsC27m0xB17;22H0xB b: Use existing partition sizes 0xB18;22H0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjB16;23H39;49ma 39;49mH C37m44mYou can now change the sizes for the system partitions. The default is to allocate all the space to the root file system. However, you may wish to have separate /usr (additional system files), /var (log files etc) or /home (users' home directories) file systems.39;49m37m44mK 39;49m37m44mK Free space will be added to the partition marked with a '+'. 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK13;22H39;49m37m44mK14;22H39;49m37m44mK15;22H39;49m37m44mK16;22H39;49m37m44mK17;22H39;49m37m44mK18;22H39;49m37m44mK8;2H39;49m9;9H37m44mMB9;20HCylinders Sectors Filesystem 39;49mCC37m44m>7ma: 228 (896) 228 466944 + / CCCC27mb: 12811;29H128 262144 swap c: 012;31H012;41H0 /tmp (mfs) d: 013;31H013;41H0 /usr e: 014;31H014;41H0 /var f: 015;31H015;41H0 /home g: Add a user defined partition h: Change input units (sectors/cylinders/MB) x: Accept partition sizes. Free space 668 MB, 5 free partitions.10;4H39;49mBBBBBBBB 37m44m a: 228 (896) 228 466944 + / CCC27m39;49m37m44m b: 128 128 262144128swap262144 swap CCC27m39;49m37m44m c: 0 0 0 0/tmp (mfs0 /tmp (mfs) CCC27m39;49m37m44m d: 0 0 0 0/usr 0 /usr CCC27m39;49m37m44m e: 0 0 0 0/var 0 /var CCC27m39;49m37m44m f: 0 0 0 0/home 0 /home CCC27m39;49m37m44mrg:eAddea useridefined partition CCC27m39;49m37m44mph: Change(inputrunitsi(sectors/cylinders/MB) CCC27m39;49mHpt partition sizes. Free space 668 MB, 5 free partitions. C37m44mWe now have your BSD disklabel partitions as:39;49m37m44mK This is your last chance to change them.39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK9;9H39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK5;2H39;49mCCC37m44mStart MB End MB Size MB FS type Newfs Mount Mount point --------- --------- --------- ---------- ----- ----- ----------- 39;49m37m44ma:7;13H07;21H8957;31H896 FFSv1 Yes Yes / b:8;11H896 10238;31H128 swap c:9;13H0 1023 1024 Whole disk d:10;13H010;23H010;33H0 unused e: Show all unused partitions f: Change input units (sectors/cylinders/MB) 27m39;49mtition sizes ok H C37m44mPlease enter a name for your NetBSD disk39;49m37m44mK 39;49m37m44mK5;5H39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK2;42H39;49mC37m44m[QEMU HARDDISK ]: 39;49m H2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49m C37m44mOk, we are now ready to install NetBSD on your hard disk (sd0). Nothing has been written yet. This is your last chance to quit this process before anything gets changed. Shall we continue? 39;49m11;32H37m44m0lqqqqqqqqqqqqqqqkB12;32H0xB yes or no? 0xB13;32H0xB13;48H0xB14;32H0xB>7ma: No14;48H27m0xB15;32H0xB b: Yes15;48H0xB16;32H0mqqqqqqqqqqqqqqqjB14;33H39;49mb 37m44m a: No15;33H>7mb: Yes15;33H27m39;49mH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49mCCCCC37m44mStatus: 7mRunning2;5H27mCommand: 7mdisklabel -w -r -f /tmp/disktab sd0 'QEMU HARDDISK ' 27m--------------------------------------------------------------------------------4;1H39;49m 39;49m1;14H37m44m7mFinished27m39;49mH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49mH2J39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mK 39;49m37m44mKH39;49mCCCCC37m44mStatus: 7mRunning2;5H27mCommand: 7m/sbin/newfs -V2 -O 1 -b 8192 -f 1024 /dev/rsd0a 27m--------------------------------------------------------------------------------4;1H39;49m 39;49m37m44m/dev/rsd0a: 896.0MB (1835008 sectors) block size 8192, fragment size 1024 39;49m37m44musing 20 cylinder groups of 44.80MB, 5735 blks, 11136 inodes. 39;49m37m44m...39;49m37m44m....39;49mTraceback (most recent call last): File "/usr/pkg/bin/anita", line 137, in status = main() File "/usr/pkg/bin/anita", line 117, in main a.install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1391, in install self._install() File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 1168, in _install 10800) File "/usr/pkg/lib/python2.7/site-packages/anita.py", line 85, in expect r = pexpect.spawn.expect(self, pattern, *args, **kwargs) File "/usr/pkg/lib/python2.7/site-packages/pexpect/__init__.py", line 1410, in expect timeout, searchwindowsize) File "/usr/pkg/lib/python2.7/site-packages/pexpect/__init__.py", line 1425, in expect_list timeout, searchwindowsize) File "/usr/pkg/lib/python2.7/site-packages/pexpect/__init__.py", line 1527, in expect_loop raise TIMEOUT(str(err) + '\n' + str(self)) pexpect.TIMEOUT: Timeout exceeded. version: 3.0 command: /usr/pkg/bin/qemu-system-sparc args: ['/usr/pkg/bin/qemu-system-sparc', '-m', '64', '-drive', 'file=/bracket/sparc/test/2016.02.17.01.23.32/anita/wd0.img,media=disk,snapshot=off', '-nographic', '-drive', 'file=/bracket/sparc/test/2016.02.17.01.23.32/anita/download/sparc/NetBSD-7.99.26-sparc.iso,media=cdrom', '-boot', 'd'] searcher: buffer (last 100 chars): 'er groups of 44.80MB, 5735 blks, 11136 inodes.\r\r\n\x1b[39;49m\x1b[37m\x1b[44m...\x1b[39;49m\x1b[37m\x1b[44m....\x1b[39;49m' before (last 100 chars): 'er groups of 44.80MB, 5735 blks, 11136 inodes.\r\r\n\x1b[39;49m\x1b[37m\x1b[44m...\x1b[39;49m\x1b[37m\x1b[44m....\x1b[39;49m' after: match: None match_index: None exitstatus: None flag_eof: False pid: 18507 child_fd: 9 closed: False timeout: 300 delimiter: logfile: None logfile_read: logfile_send: maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 5.0 delayafterterminate: 5.0 10945.20 real 0.48 user 4.14 sys